Embedded systems
- 1. Embedded systems Introduction-What is an embedded system Significance Why a microcontroller? What is inside an Embedded system? Architecture of an Embedded system
- 2. What is an embedded systems: An embedded system is one that has computer hardware with software embedded in it as one of its components. Or We can define an embedded system as “A microprocessor based system that does not look like a computer”. Or we can say that it is “A combination of computer hardware and software, and perhaps additional mechanical or other parts, designed to perform a dedicated function. In some cases, embedded systems are part of a larger system or product, as is the case of an antilock braking system in a car ”.
- 3. Significance: Due to their compact size, low cost and simple design aspects embedded systems are very popular and encroached into human lives and have become indispensable. They are found everywhere from kitchen ware to space craft. To emphasize this idea here are some illustrations.
- 4. Embedded systems everywhere! Embedded systems span all aspects of modern life and there are many examples of their use. a) Biomedical Instrumentation – ECG Recorder, Blood cell recorder, patient monitor system b) Communication systems – pagers, cellular phones, cable TV terminals, fax and transreceivers, video games and so on. c) Peripheral controllers of a computer – Keyboard controller, DRAM controller, DMA controller, Printer controller, LAN controller, disk drive controller. d) Industrial Instrumentation – Process controller, DC motor controller, robotic systems, CNC machine controller, close loop engine controller, industrial moisture recorder cum controller. e) Scientific – digital storage system, CRT display controller, spectrum analyser.
- 5. Where the embedded systems existing earlier? Yes / No, We have been enjoying the grace of embedded system quite a long time. But they were not so popular because in those days most of the systems were designed around a microprocessor unlike today’s systems which were built around a microcontroller. As we know a microprocessor by itself do not possess any memory, ports etc… So, everything must be connected externally by using peripherals like 8255, 8257, 8259 etc. So the embedded system designed using microprocessor was not only complicated in design but also large in size. At the same time the speed of a microprocessor is also a Limitation for high end applications.
- 6. Why a microcontroller ? A microcontroller is a single silicon chip with memory and all Input/Output peripherals on it. Hence a microcontroller is also popularly known as a single chip computer. Normally, a single microcomputer has the following features : Arithmetic and logic unit Memory for storing program EEPROM for nonvolatile data storage RAM for storing variables and special function registers Input/output ports
- 7. Timers and counters Analog to digital converter Circuits for reset, power up, serial programming, debugging Instruction decoder and a timing and control unit Serial communication port So, its no wonder to say that the microcontroller is the most sought after device for designing an efficient embedded system.
- 8. What is inside an Embedded system? Every embedded system consists of custom-built hardware built around a Central Processing Unit (CPU). This hardware also contains memory chips onto which the software is loaded. The software residing on the memory chip is also called the ‘firmware’. The operating system runs above the hardware, and the application software runs above the operating system. The same architecture is applicable to any computer including a desktop computer. However, there are significant differences. It is not compulsory to have an operating system in every embedded system.
- 9. For small appliances such as remote control units, air-conditioners, toys etc., there is no need fir an operating system and we can write only the software specific to that application. For applications involving complex processing, it is advisable to have an operating system. In such a case, you need to integrate the application software with the operating system and then transfer the entire software on to the memory chip. Once the software is transferred to the memory chip, the software will continue to run for a long time and you don’t need to reload new software .
- 10. Features of an embedded system: Embedded systems do a very specific task, they cannot be programmed to do different things. Embedded systems have very limited resources, particularly the memory. Generally, they do not have secondary storage devices such as the CDROM or the floppy disk. Embedded systems have to work against some deadlines. A specific job has to be completed within a specific time. In some embedded systems, called real-time systems, the deadlines are stringent. Missing a dead line may cause a catastrophe – loss of life or damage to property. Embedded systems are constrained for power, As many embedded systems operate through a battery, the power consumption has to be very low. Some embedded systems have to operate in extreme environmental conditions such as very high temperatures and humidity.
- 11. Classifications of embedded systems: Based on functionality and performance requirements, embedded systems are classified as : 1) Stand-alone Embedded Systems 2) Real-time Embedded Systems 3) Networked Information Appliances 4) Mobile Devices
- 12. Stand-alone Embedded Systems: As the name implies, stand-alone systems work in stand-alone mode. They take inputs, process them and produce the desired output. The input can be electrical signals from transducers or commands from a human being such as the pressing of a button. The output can be electrical signals to drive another system, an LED display or LCD display for displaying of information to the users. Embedded systems used in process control, automobiles, consumer electronic items etc. fall into this category.
- 13. Real-time Systems: Embedded systems in which some specific work has to be done in a specific time period are called real-time systems. For example, consider a system that has to open a valve within 30 milliseconds when the humidity crosses a particular threshold. If the valve is not opened within 30 milliseconds, a catastrophe may occur. Such systems with strict deadlines are called hard real- time systems. In some embedded systems, deadlines are imposed, but not adhering to them once in a while may not lead to a catastrophe. For example, consider a DVD player. Suppose, you give a command to the DVD player from a remote control, and there is a delay of a few milliseconds in executing that command. But, this delay won’t lead to a serious implication. Such systems are called soft real-time systems .
- 14. Hard-real time embedded systems
- 15. Networked Information Appliances: Embedded systems that are provided with network interfaces and accessed by networks such as Local Area Network or the Internet are called networked information appliances. Such embedded systems are connected to a network, typically a network running TCP/IP (Transmission Control Protocol/Internet Protocol) protocol suite, such as the Internet or a company’s Intranet. These systems have emerged in recent years. These systems run the protocol TCP/IP stack and get connected through PPP or Ethernet to an network and communicate with other nodes in the network.
- 16. mobile devices: Mobile devices such as mobile phones, Personal Digital Assistants (PDAs), smart phones etc. are a special category of embedded systems. Though the PDAs do many general purpose tasks, they need to be designed just like the ‘conventional’ embedded systems.
- 17. Architecture of an Embedded system
- 18. This slide shows the Hardware architecture of an embedded system
- 19. Now let us see the details of the various building blocks of the hardware of an embedded system. Central Processing Unit (CPU) Memory (Read only memory and Random access memory) Input Devices Output Devices Communication interfaces Application specific circuitry
- 20. Layered architecture of an Embedded System