EMC Networker installation Document
Download as DOC, PDF8 likes1,972 views
1. The document outlines the steps to setup Networker for backup and recovery including installing the Networker app server on a Windows machine and Linux client, configuring a virtual tape library using Firestreamer, adding the Linux client to the Windows server, and performing basic Networker operations like start, stop, and status checks. 2. A key step is installing necessary dependency RPMs before installing the Networker software on Linux, as the default OS installation may be missing packages required by Networker. 3. The Windows server can then back up and recover the configured Linux client after ensuring the server hostname is resolvable in the client's hosts file.
![Now install this mention RPM
[root@NetWorker linux_x86_64]# rpm -ivh lgtoclnt-9.0.0.2-1.x86_64.rpm lgtonmc-9.0-1.x86_64.rpm
lgtoman-9.0.0.2-1.x86_64.rpm lgtonode-9.0.0.2-1.x86_64.rpm lgtoserv-9.0.0.2-1.x86_64.rpm
So many dependenciyes RPM is needed that’ why athached /media/RHEL_6.4 x86_64 Disc 1/Packages
and install dependciyes RPM](https://image.slidesharecdn.com/networkerinstallation-161226233807/85/EMC-Networker-installation-Document-18-320.jpg)
EMC Networker installation Document
- 1. Networker Setup steps: 1. Install Networker app server in windows machine, here I install server, client and storage node. 2. Install Networker app server in Linux system (only client) from that server we taken backup. 3. Though I don’t have any tape library, that’s why I install Firestreamer for creating virtual tape library where I assign a folder as a tape. 4. Client configuration through Network App server. 5. Take a backup from client server. 6. Start the recover process for client server from Server. 7. Basic operation of Networker App ( Start , Stop , Status) Look At the below Diagram, we can find diagram of Networker Server Step 1: Install Networker in windows Machine Unzip the nw90_win_x64.zip for Networker 9 version
- 2. Then Run Installer: F:NetWorkerwin_x64networkrNetWorker-9.0.0.2.exe
- 3. Here my windows server works as Server and client means from this windows machine , I can perform other networker client backup and recovery process.
- 6. Welcome@1
- 13. To browse the Networker app , need to upgrade Java version Then install
- 16. Step 2 : Install Networker Client install in Linux system Send nw90_linux_x86_64.tar.gz in Linux system through Winscp
- 17. Gunzip the nw90_linux_x86_64.tar.gz Then extract this nw90_linux_x86_64.tar file Now check which RPM used for what purpose
- 18. Now install this mention RPM [root@NetWorker linux_x86_64]# rpm -ivh lgtoclnt-9.0.0.2-1.x86_64.rpm lgtonmc-9.0-1.x86_64.rpm lgtoman-9.0.0.2-1.x86_64.rpm lgtonode-9.0.0.2-1.x86_64.rpm lgtoserv-9.0.0.2-1.x86_64.rpm So many dependenciyes RPM is needed that’ why athached /media/RHEL_6.4 x86_64 Disc 1/Packages and install dependciyes RPM
- 19. The NetWorker installation for all supported x64 Linux operating systems and versions requires two packages that the default OS installation might not include. Manually download and install the following Linux OS packages before you install the NetWorker software. The NetWorker installation fails when these two packages do not exist on the host: rpm -uvh --nodeps compat-libstdc++-33-3.2.3-69.el6.i686.rpm rpm -ivh --nodeps compat-libstdc++-33-3.2.3-69.el6.i686.rpm rpm -ivh --nodeps compat-libstdc++-33-3.2.3-69.el6.x86_64.rpm ls glibc* rpm -ivh --nodeps glibc-2.12-1.107.el6.i686.rpm rpm -ivh --nodeps glibc-devel-2.12-1.107.el6.x86_64.rpm rpm -ivh --nodeps glibc-2.12-1.107.el6.x86_64.rpm rpm -ivh --nodeps glibc-* ls nss-softokn-fr* rpm -ivh --nodeps nss-softokn-freebl* After complete this dependecyes
- 21. Failed to start Networker due to no entry in /etc/hosts After enter this entry it’s ok
- 22. Step3 : Create Virtual Tape Library Install Firestreamer-x64.msi
- 24. Create Virtual Media Library assisgn a windows directory as a virtual tape
- 25. Step 4:Make linux system as a client sytem for windows system Now Aadministrator windows come in, then click Protection Enter the Linux system IP Or you can use Hostname client Server , you must entry hosts file in client information
- 26. Though client is install in Linux system then Server will automatically get information of client system
- 27. ** Getting error here to resolve it put server hostname in client machine
- 28. After that shows all client directory you can take backup
- 29. Or you can select any specific backup directory
- 33. Now this client added in the server
- 34. Step 5: Due to Some Technical problem Backup Sceniraio is ommitted from this Doc. (Due to no phyical tape Library) Step 6: Recovery step for Client from Backup Right click of client , then select recover Client infromation with all backup et information is coming, Then click Next button
- 35. Step 7: Basic Opertaion of Netwoker ( Start , Stop , Status) Status check: ps -ef | grep nsr If any job is not running then you have to understand Networker is not running If running then you will see the Networker Job is running. Start Networker job: Move this path /etc/init.d then run ./networker start
- 36. Check the status ./networker status Stop the Netwoker app: Move this path /etc/init.d then run ./networker stop Thanks for watching my Doc.