End of chapter problem 2
- 1. EC202- Computer Aided Design NAME:………………………………………………………. CLASS.: ……………… REGISTRATION NO.: ……………………………………… END OF CHAPTER PROBLEM: 2 APPLICATION OF AUTOCAD PACKAGE IN TECHNICAL AND ELECTRICAL DRAWINGS: THE EDIT/MODIFY COMMAND AND DISPLAY CONTROLS No. Skill i. Accuracy ii. Within Time Frame Excellent (8-10 marks) amy/khk/jke/puo EC8.1 Average (5-7 Marks) Weak (0-4 Marks) Total 1. Setting A4 Metric Measurement & drawing limits 2. Fig. 8.1 3. Fig. 8.2 4. Fig. 8.3 5. Fig. 8.4 Sub-Total /50 No. Report Total 1. Discussion /5 2. Question /3 3. Reflection /2 Sub-Total /10 Total /60
- 2. EC202- Computer Aided Design END OF CHAPTER PROBLEM: 2 TITLE : APPLICATION OF AUTOCAD PACKAGE IN TECHNICAL AND ELECTRICAL DRAWINGS COURSE LEARNING OUTCOME: CLO 4: Apply the draw and edit/modify commands skillfully to produce simple and complex technical drawings. OBJECTIVES: The students should be able to: 1. Edit objects by using the Edit/Modify Commands such as Erase, Move, Rotate, Break, Trim, Scale, Mirror, Array, Stretch, Extend, Fillet, Chamfer, Offset, Divider, Measure, Change and Poly-Edit. 2. Draw and Edit simple and complex technical drawings by making use of the Draw and Edit/Modify commands. EQUIPMENT : 1. Desktop Computer/Laptop 2. AutoCAD 2004 Software PROCEDURE: 1. Create a new drawing space using the Metric measurement. 2. Set the drawing limits to A4 paper size. 3. Display the grid to the extent of the drawing limits. 4. Redraw to full-scale size all the figures given in Fig. 8.1 to Fig. 8.4. 5. Do not give dimensions to the figures drawn. 6. Save the drawing file and exit AutoCAD. amy/khk/jke/puo EC8.2
- 3. EC202- Computer Aided Design Fig. 8.1 Fig. 8.2 amy/khk/jke/puo EC8.3 (10 Marks) (10 Marks)
- 4. EC202- Computer Aided Design Fig. 8.3 Fig. 8.4 amy/khk/jke/puo EC8.4 (10 Marks) (10 Marks)
- 5. EC202- Computer Aided Design DISCUSSION : 1. In Fig. 8.3, name three (3) Modify commands that you might have used to complete the figure. i. …………………………………. ii. …………………………………. iii. …………………………………. 2. In Fig. 8.4, name two (2) Object Snap commands that you might have used to complete the figure. i. …………………………………. ii. ………………………………… QUESTION : 1. Name 3 (three) MODIFY commands used to create the diagram below: ……………………………………… ……………………………………… ……………………………………… REFLECTION: At the end of this practical work, I had learnt that: ………………………………………………………………………………………………… ………………………………………………………………………………………………… ………………………………………………………………………………………………… ………………………………………………………………………………………………… amy/khk/jke/puo EC8.5 (3 Marks) (2 Marks) (3 Marks) (2 Marks)