Engineering Job Analysis, Description & Specification I

ENGINEERING
JOB ANALYSIS, DESCRIPTION &
SPECIFICATION I
HENRY JOHN N. NUEVA
First Edition
2014

Published by the Author through Lulu.com a Self Publishing
Company based in Raleigh, N.C. USA
© 2014 Henry John N. Nueva. All rights reserved.
ISBN – 978-1-304-86564-9
Any copy of this book without the permission from the author or publisher shall be
considered as proceeding from an illegal source.
All rights reserved. No part of this book may be reproduced in any form or by
means electronic or mechanical, including photography or recording system, without
written permission in writing from the author or the publisher.

To
Engr. Alfredo D. Apolinar
Dr. Meliton G. Dassun
Dr. Josefina B. Bitonio
Dr. Reynaldo T. Gelido
a fervent and zealous exponent of enlightened
Workforce Management Administration and
Engineering Enterprise
As well as to my dearest family Nagun-Nueva
this book is sincerely dedicated…

Preface
Recent development in the field of Engineering and Management is swiftly
upward- this is obvious especially in the administering workforce development and
transition. The need for more resourceful, economical and equitable management of
workforce system in commerce and industry has never been as pronounced as it is
today.
Scientific management and methodologies continuous searching for ways to
improve the production process and human capital towards better workforce
management command yet approaches to the solution of managerial problems in
business and engineering enterprise is undeniably developed and recognized.
Scientific management application can be found in numerous agencies and
companies; when a certain representative or official aims to discover what particular
management procedure is applicable in a given situation by carefully examining the
job, determining what is to be accomplished and then creating or designing the tools
and methods to accomplish the task.
This book includes definitions and a brief coverage of job analysis
fundamentals and applications. It is intended to show the practical importance of the
material covered towards engineering enterprise’ strategic human resource
management with emphasis on job analysis methods and job description. Review
questions and short cases were also provided at the end to facilitate the ability to
install job analysis program.

Contents
Title Page
1. Introduction to Engineering Job Analysis………………………...2
2. Job Analysis: Defined…………………………………….................5
3. Job Analysis in Engineering Methodologies ……………………….7
4. Job Analyst and Its Functions in Engineering Enterprise………….11
5. Methods of Collecting Information…………………………….......13
6. Types of Job Analysis Interview Method…………………………..18
7. The Questionnaire Method & Classifications……………………....21
8. Job Analysis Control…………………….............................................28
9. Job Description & Specification…………………………………....32
10.Job Specification Information……………………………………...41

Engineering Job Analysis, Description & Specification I

2
INTRODUCTION
Why learn Job Analysis?
Hiring is of key importance to the overall productivity of Engineering
Enterprise or any other businesses in private or public settings. A well put together
job description is a good business investment since it can be used to support most
HR functions like recruitment, selection, orientation, training, work plans,
compensation, performance reviews and legal defense. Job descriptions explain the
key responsibilities of the actual position, reporting relationships and work
environment.
Here are some major reasons why Job Analaysis is important in the
development and management of Human Resource Unit:
(1) To comprehend the essence of studying jobs and knowing what each worker does, how he
does it, under what conditions he executes his job, and what other requirements each
worker must hold to perform his job satisfactorily.
(2) To be able understand the importance of knowing the duties, responsibilities and
requirements of each job as a tool in employee selection and hiring and in appraising the
employee performance in the job and many other applications.
(3) To learn the methods, mechanics, and guidelines of analyzing the different jobs in the
organization and be able to write the job descriptions and job specifications.
(4) To utilize the resources in developing and installing job analysis program in a company
or organization.
On the other hand, the purpose of getting greater job satisfaction, increased
performance, reduced absenteeism & turnover, and greater profitability is one of the
organizational objective where job analysis and programming can be utilize.

3
Furthermore, Job Analysis as a basic instrument of human resource
management in the field of engineering and technology applied more specifically on
the following ideal key areas:
Figure 1. Basic Rationale of Job Analysis
Organization and Manpower Planning: It is helpful in organizational
planning for it defines labor needs in clear terms. It coordinates the activities of the
work force and facilitates the division of work, duties and responsibilities;
Recruitment and Selection: Job analysis indicates the specific job
requirements of each job (i.e. skills and knowledge). Through this, JA provides a
realistic basis for hiring, training, placement, transfer and promotion of personnel.
Basically, one of the goals of the analysis is to match the job requirements with a
worker’s aptitude, abilities and interests.
Training & Development: Job analysis determines the level of standards of
job performance. Job analysis provides the necessary information to the

4
management of training and development programs. It helps to determine the
content and subject matter of training courses and helps in checking application
information, interviewing, and weighing test results and in checking references.
Wage and Salary Administration: JA is the foundation for job evaluation. It
could help by indicating the qualifications required for doing a specified job and the
risks and hazards involved in its performance.
Performance Appraisal: It will help in establishing clear cut standards which
may be compared with the actual contribution of each individual. Job analysis data
provide a clear cut performance for every job.
Job Re-engineering: JA provides information which enables the
management to change jobs in order to permit their being manner by personnel with
specific characteristics and qualifications that can be either Industrial Engineering
Activity (IEA) which industrial engineers may use job analysis information in
designing the job by making comprehensive study or on the other hand, applying
Human Engineering Activity (HEA) where study on time, motion and work
measurement (i.e. Physical, Mental and Psychological) are studied.
Health & Safety: Job analysis provides an opportunity for identifying
hazardous and unhealthy conditions so that corrective measures may be taken to
minimize the possibility of accidents and sickness.
What is Job Analysis?
Models of Job Analysis were primarily conducted for the purpose of
improving the efficiency of employees. Father of Scientific Management, Frederick
Taylor (1911) studied work by breaking it down into smallest identifiable
components to find out the best way to perform each component and then
compiled work into larger duties that finally lead to jobs.

5
Job Analysis: Defined
Job Analysis (JA) is the process of studying jobs to gather, analyze, synthesize
and report information about job responsibilities and requirements and the
conditions under which work is performed (Heneman & Judge,2009).
Organizations and Engineering Enterprises exist to accomplish some goal or
objective. They are collectivities rather than individuals because achieving the goals
requires the effort (work) of a number of people (workers). The point at which the
work and the worker come together is called a job – it is the role played by worker.
To some extent we need to know lot of information about these roles/jobs that
includes:
 What does or should the person do?
 What knowledge, skill, and abilities does it take to perform this job?
 What is the result of the person performing the job?
 How does this job fit in with other jobs in the organization?
 What is the job’s contribution toward the organization’s goals?
The goal of this process is to secure all necessary job data. Job evaluation
represents the major use of job analysis. Since job information needed for various
uses may differ, some organizations make a specialized study for each specific use.
To identify the jobs in an organization and to differentiate them from one
another, each job category must be given a specific title. Other cases however, job
titles are too general to suitably describe the duties and responsibilities inbuilt on
each. Thus, no standard job descriptions and job specifications can be uniform in all
firms. To determine the duties, responsibilities and skills pertinent to each job
category, one has to analyze each position in terms of the duties and responsibilities
involved, and the relationship of the job to other jobs.

6
Next to these, one must determine the human traits, skills, knowledge, and
abilities of worker to enable him satisfactorily discharge his/her duties and
responsibilities inherent in the positions.
Job Analysis: Detailed Uses & Applications
Engineering firms are encouraged to navigate and perform the fundamental
application of job analysis. This is to effectively come up with a quality workforce
and production output that can be use in measuring level of fineness or make in
addition of strategic human resource planning and management.
The primary uses of job analysis (P.S. Sison, 1982) as applied to any
organization are explicated as follows:
1.) To know the duties of each job by studying its requirements in terms of
skills, efforts, responsibilities and working conditions;
2.) To serve as a guide in the recruitment, selection, placement, and
counseling of employees;
3.) To serve as a basis for job evaluation and wage and salary administration;
4.) To develop channels of promotion and transfer along lines determined by
the duties, responsibilities, job-requirements, and working conditions;
5.) To help in counseling and handling of grievances;
6.) To help determine working conditions that are hazardous, unpleasant, or
unhealthy and thus enable management to institute preventive as well as
corrective measures that will improve these conditions;
7.) To serve as a guide in establishing standards of performance, production
standards, simplifying work procedures, and improving methods through
the analysis of methods and time-and-motion studies;

7
8.) To help in effective supervision. Supervisors are provided with precise and
detailed descriptions of the jobs under their respective jurisdictions and
they can make these serve as basis for judging employees performance;
9.) To determine the training needs of an employee who may not yet possess
the skills and abilities required by the position he or she occupies;
10.) To standardize job titles that reflect the functions required of each job;
11.) To enable management to institute a job control system in which a
continuous inventory of all authorized positions can be made available at
all times.
Job Analysis in Engineering Methodologies
What is a Technical Job?
Technical Job skills refer to the talent and expertise a person possesses to
perform a certain job or task. This is sometimes called “hard skills”, as opposed to
soft skills which are personality and character traits. Meanwhile, technical skills are
those abilities acquired through learning and practice; in other words a particular skill
set or proficiency required to perform a specific job or task.
Approaches to Analyzing Jobs
There is no one way to study jobs even in Engineering Enterprise. Numerous
models of job analysis is now exist, each focusing on some particular use for job
analysis. This process may seek to obtain technical information about work, workers,
and context within which the job exist.

8
Figure 2. Deductive & Inductive Decision Tree
Further, the approach may be either inductive or deductive approach. In an
inductive approach, information about a job is collected first and then organized into
a framework to create a description of a job. While in a deductive approach, a model
of information is developed and the collection of data focuses upon this model.
The basic principle of Job Analysis model as formulated in the idea of
obtaining information on work activities, a proposed formula can be used in order to
facilitate and initiate the functions. This formula includes:
1. What the worker/employee does?
2. How he or she does it?
3. Why he or she does it?
4. Skill involved in doing it.
In fact, providing the WHAT, HOW and WHY of each task and the total job
should constitute a functional description of work activities for compensation
purposes.

9
Dimensions of Job Analysis
There is a huge amount of job analysis technique and these techniques may
differ on a number of dimensions.
Figure 3. Dimensions of Job Analysis
Level of Analysis
By remembering the concept we’re discussing job analysis, we entail that the
unit of analysis is the job. In fact, the level or unit of analysis represents a decision
that is worthy of argument.
The lowest level is Employee Attributes – the knowledge, skills, and abilities
required by the job. One level up is the element. An element is often considered the
smallest division of work activity apart from separate motions, although it may be
used to describe singular motions. At such, it is the unit of analysis for time and motion
study, and is used primarily by industrial engineers.
Next level is the Task, a discrete unit of work performed by an individual. A task
is more independent unit of analysis. It consists of a sequence of activities that
completes a work assignment. When sufficient task accumulate to justify the
employment of a worker, a positive exists. Furthermore, a job is a group of positions

10
that are identical in their major or significant task. The positions are sufficiently alike
to justify being covered by a single analysis and description. One or many persons
may be employed on the same job. Jobs found in more than one organization are
termed occupations. And therefore, occupations grouped by function are usually
referred to as job families.
Information to be collected
Since the job is linked between organization and the employee, it may be
useful to develop a model based on this common connection. We can say that both
the organization and the employee contribute to the job and expect to receive
something from it.
The principal sources of information about a job are the employees assigned
to it, other employees who formerly occupied the job and the supervisor of the unit
where the job is. The job information to be collected should also include the
personal traits required of the worker to perform it excellently.
Below are sample of key points on determining various job-related
information cover:
1. What job requires the worker/employee to do?
2. How the workers discharge the duties of the job efficiently?
3. Why the work is performed.
4. Supervision involved in the job.
5. The working conditions.
The study of jobs is a function of the Human Resource Department (HRD),
however today some firms allocate this function to outside consultants (outsource)
hired on a contractual basis. This is to update the data and information on jobs and

11
supervisors notify the personnel department about any changes made relative to the
duties and responsibilities of the jobs under his authority and directives which is
done normally on a periodic scheme.
Job Analyst and its Function in Engineering Enterprise
In today’s complex business environment, an organization’s adaptability,
agility, and ability to manage constant change through innovation can be keys to
success. Workforce management traditional methods will no longer lead to reaching
objectives under current labor conditions. That’s where Job Analysis comes in.
Innovative corporations achieve goals through HR Management projects that
translate workforce needs into positive deliverables and insights. And Job Analyst
makes it all happen more efficiently and effectively.
A Job Analyst is a person who studies the duties, responsibilities and other
requirements of a job and writes down the corresponding jobs description and
specification. Becoming successful Job Analyst takes core business & management
skills, and specialized knowledge that will advance a Human Resource Department
as well as the Company’s objectives and contribute to its remaining competitiveness
in a complex administration. These core skills include:
 Written and Verbal communication, including technical writing skills
 Understanding of systems Engineering Concepts
 The ability to conduct time and motion study
 Personnel Management Case Development
 Modeling techniques and methods
 Leadership
Increasingly, modern successful business organization recognizes the value of
job analyst training to improve their overall performance. Job Analysts gather
information about jobs through interviewing employees, observing performance in

12
certain tasks, asking employees to fill out questionnaires and worksheets, and by
collecting further information about the job from other sources. Job Analyst will
then writes up their findings from such analysis and review them with management.
After this, the documentation is presented to the senior manager/supervisor
for review. He may edit the documentation by adding, deleting or modifying duties,
knowledge, skills, abilities, and other characteristics and requirements relevant to the
job. A signed and dated job description is then prepared and the job description
becomes the official company record for a particular job.
Meanwhile, there are no specific guidelines outlining the requirements needed
to become a job analyst in engineering enterprises and companies, however, most
have an undergraduate degree on engineering and a masters degree on engineering
management or business administration. Some job analysts even have a PhD. The
majority of job analysts have extensive education in industrial and organizational
psychology. This field of psychology deals with how people perform work tasks and
how they interact at the workplace. Such programs focus on statistics and relate to
other disciplines such as sociology, economics, and other branches of psychology.
Moreover, below are the duties of a Job Analyst excerpts from the Dictionary
of Occupational Titles:
Figure 4. Job Analysts Duties and Responsibilities

13
Methods of Collecting Information
Job Analysis traditionally has been conducted in a number of different ways.
Also, firms differ in their needs and in the resources they have for conducting job
analysis.
An HR specialist (an HR specialist, job analyst, or consultant), a worker, and
the worker’s supervisor usually work together in conducting job analysis. Since job
analysis data is usually collected from several employees from different department,
using interviews and questionnaires. The data is then averaged, taking into account
the departmental context of the employee, to determine how much time a typical
employee spends on each several specific tasks.
The Interview Method
This method is most commonly used in gathering facts about job performed
inside the company. The Job Analyst obtains information about the work by
personally conferring with the worker or the latter’s supervisor, and sometimes with
both, either in the place of work or in the supervisor’s office.
There are three (3) basic types of interviews managers use to collect job
analysis data namely:
1. Individual (this is to get the employee’s perspective on the job’s duties
and responsibilities)
2. Group (applies when large numbers of employees perform the same job)
3. Supervisor (to get his/her perspective on the job’s duties and
responsibilities)
A job analyst normally prepares a form to use as his guide in gathering facts
about the job. Through the interview method, job analyst acquires a personal
impression to the job, and this contributes to the accuracy of his job later.

14
Figure 5. An example of (JAIF) Job Analysis Information Form

15
Figure 5. …continuation of (JAIF) Job Analysis Information Form

16
Using Interview method in gathering facts for Job Analysis provide numbers
of advantages. One of this is the fact that information and question are more
comprehensive because it is simple, quick and the interviewer can unearth activities
that may never appear in written form.
Often an employee may feel uncomfortable being interviewed for a Job
Analysis because they may feel that the results of the job analysis will adversely affect
them in terms of salary or working conditions. However, in order to facilitate a
successful interview towards job analysis, the following Basic Guidelines & Tips
are genuinely suggested:
 Be Prepared
 Formulate and practice a list of questions to be asked to the interviewee.
 Consider the background of workers when planning interview questions.
 Anticipate questions about the interview process from the worker.
 Make sure that all forms and documents are present and are easily read and
understood.
 Conduct the interview in a setting free from noise and other
distractions
 Attempt to conduct the interview in pairs. It makes recording of
information easier
 Begin by introducing yourself in an informal manner and by
clearly explaining purposes of the interview
 Establish rapport
 Give the interviewee an opportunity to get used to the situation and to you.
After the introduction, start by making general comments and by asking
broad questions.
 Keep interview length to under an hour

17
 Record interview information by any technique you feel
comfortable with although some type of standard recording is
preferred. However, use of tape recorders is not advised since
workers feel sometimes uneasy and are time consuming to
transcribe
 Actively listen to the answers of workers
 Repeat questions and/or give an example in response to the worker’s
answer.
 Limit the amount of time you record responses of the worker on paper.
 Avoid questions that can be answered by yes or no responses
 Avoid questions that begin with the word “Why”
 Avoid “leading” questions
 Ascertain the specific activities performed by the worker
 It is useful to ask the employee to think of a typical work day and tell you
the first task they perform when they walk in.
 To achieve the desired detail regarding what the worker does, it is
beneficial to focus on the inputs and the behaviors that the workers engages
in (outputs) to respond to these inputs.
 Questions of the following type can prove useful in this regard:
 What specific activities are performed when a given input
is received?
 What are the specific outputs of the work performed?
 Where, if anywhere, are these outputs sent?
 What, if any, time requirements exist to produce the
outputs?
 Exercise a moderate amount of “control” during the interview
 Be aware of the expressions and reactions of the worker
 Conclude with informal talk and summary of the interview

18
 Ask the worker if he/she has any questions
 Request any additional general information or clarification
 Reconfirm the purpose and intended use of the interview
information
 Don’t forget to give thanks for their time
Types of Job Analysis Interview Method
In preparing job interview questions and scripts, it is essential to distinguish
what type of interview you will need to use. Unstructured Interviews are very
informal and produce qualitative data (descriptive data). The analyst can ask the
participant questions based on their previous answers, giving the participant
opportunity to raise related topic and take the interview in their chosen direction.
Unstructured Interview is a conversation with no prepared questions or
predetermined line of investigation. However the analyst should explain (1) the
purpose of the study and (2) the particular focus of the interview.
Figure 6. Structured & Unstructured Interview in a single case design

19
The roles and the purposes give framework. The analyst generally uses a
questioning strategy to explore the work the job holder performs. Listening and
taking notes are very important. These enable follow up questions to be posed. The
questions and responses –with summaries enable the interview to be controlled. The
conversation takes on a structure with areas being considered, explored, and related
to each other and revisited secure in depth of information required during analysis.
An unstructured interview involves questions and responses and may be free
flowing but it becomes structured in the sense that the analyst has a purpose and
needs skill to:
1. Establish a relationship
2. Ask well-structured questions to generate a conversational flow in which the worker offers –
information- factual, opinion, subjective and objective about aspects of the job
3. To ensure information received is heard and understood - listening, clarifying and reflective
summarizing
Effective listening requires concentration and this can be distributed by
interruptions, the analyst’s own thought processes and difficulty in remaining neutral
about want is being said. Notes need to be taken without loss of good eye contact.
Cues also need to be picked up so that further questions can be asked to probe
issues and areas of interest.
On the other hand, Structured Interview is very formal. The workers will be asked
set of questions which have previously been carefully thought out in order to get the
best findings for the research. This type of interview may assume definite format
involving: (a) charting a job-holder’s sequence of activities in performance and (b) an
inventory questionnaire may be used. Care is needed to set up such interactions. A
specialist analyst is not involved and participants need to know what they are doing
why and what is expected as a result. They may be entrained as interviewers and not

20
structure the interview as recommended. Also, notes and records may be needed for
subsequent analysis.
Interview Outcomes
Interviewing is a flexible method for all levels and types of job since an
interview may focus on what a hypothetical job might involve. This method
generates descriptive data and enables job-holders to interpret their activities.
A good interviewer can probe sensitive areas in more depth. Structured
questionnaires cannot easily do this. Jobholders or employees can give overviews of
their work and offer their perceptions and feelings about their job and the
environment. Rigid questionnaires tend to be less effective where the more affective
aspects of work are concerned. However, information from different interviews can
be:
1. Hard to bring together
2. There is a potential for interviewer bias
3. Certain areas of the work may fail to be picked up
4. An interview may stress one are and neglect others
5. There are problems in interpretation and analysis with the possibility of distorted
impressions
6. The subjectivity of the data captured needs to be considered
Interviewing as the sole method of job analysis in any particular project has
disadvantages. Interviews are sometimes time consuming and training is needed. Co-
counseling may remove the analyst and enable the workers to discus work between
themselves. Though experience however they may miss items and there is the natural
problem of people not establishing and maintaining rapport with each other during
an interview.

21
The Questionnaire Method & Classifications: CMQ, PAQ, & WPS
Questionnaires may be considered self-administered interviews that are
typically very carefully structured and pretested. Often the items on a questionnaire
are tasks or activities, and workers are asked to evaluate the task on one or more
different scales. One such scale might be how difficult each task is to perform.
Figure 7. Factors of Good Questionnaire Data
The Common Metric Questionnaire (CMQ) is targeted toward both exempt and
nonexempt jobs. This questionnaire classification has five (5) sections namely; (1)
Background, (2) Contacts with People, (3) Decision Making, (4) Physical and
Mechanical Activities, & (5) Work Setting. The Background section asks 41 general
questions about work requirements such as travel, seasonality, and licensure
requirements. The Contacts with people section asks 62 questions targeting level of
supervision, degree of internal and external contacts, and meeting requirements.
The 80 Decision Making items in the CMQ focus on relevant occupational
knowledge and skill, language and sensory requirements, and managerial and
business decision making. The Physical and Mechanical section contains 53 items
that focus on environmental conditions and other job characteristics. The CMQ is a

22
relatively new instrument. It has been field tested on 4, 552 positions representing
over 900 occupations in the Dictionary of Occupational titles (DoT), and yielded
reasonably high reliabilities. (Harvey, 1993)
Figure 8. Sample PAQ Form

23
The Position Analysis Questionnaire (PAQ) developed by McCormick, Jeanneret,
and Mecham (1972) is a structured job analysis instrument to measure job
characteristics and relate them to human characteristics.
In its simplest term, PAQ is a set of questions used to describe the duties and
responsibilities of a particular job to determine what a specific job actually entails
and what traits are necessary to do it well.
The primary purpose is to compare relationship between aptitude test scores
and what skills are actually necessary for good on-the-job performance. It is consists
of 195 job elements that represent in a comprehensive manner the domain of human
behavior involved in work activities. These items falls under five (5) categories
namely:
1. Information Input (where & how the worker gets information)
2. Mental Processes (reasoning and other processes that workers use)
3. Work Output ( physical activities and tools used on the job)
4. Relationships with other persons
5. Job Context (the physical and social context of work )
Preparing a PAQ requires no complex procedure since some basic frameworks
are up and ready to follow. Below are the basic technical sections that you may use
as a guideline in preparing such PAQ form:
Section I: General Information
 This section shall contain the basic information of the worker that
includes:
 Name
 Current Date
 Current Job Title (system)

24
 Working Job Title
 Name of the Department
 Organization
 Supervisor’s Name
 Supervisor’s Title
 Job Category
 Length of time in current position
Section II: Organizational Relationships
 This section identifies reporting relationships. The purpose is to state the
position that provides work direction, complete performance reviews and
provides guideline, counseling and/or corrective /disciplinary action
relative to worker’s position.
 Some of the basic questions that you may include are:
 To whom do you report?
 Who reports to you?
 Attach a copy of the current department/unit organizational chart
Section III: Essential Functions (Duties & Responsibilities)
 Indicate the principle duties and responsibilities performed in this job.
Group job duties into major areas and then list the associated tasks in
order of importance, beginning with the most important.
 Indicate the approximate percentage of time spent on each task. When
indicating time spent, make sure to state the time reference (% of day,
month, quarter or year) appropriate to the task.
 Be as descriptive as possible- indicating the desired outcome (or reason)
why a specific task is performed.

25
Section IV: Additional Job Information
 Indicate the specific knowledge, skills, and abilities your job requires.
Think in terms of recruiting to fill a job identical to the worker.
 List formal guidelines, regulations and policies to follow and understand to
perform a job.
Section V: Decision Making & Problem Solving
 In this section, think about the types of issues a workers position in held
accountable/responsible for completing. What decisions need to consult
or notify an immediate supervisor or before taking action.
 Types of issues, concerns, and problems come to you to resolve is also
necessary.
Section VI: Working Environment
 This area describes the physical conditions in which a job is performed on
a regular basis including lifting, pushing, climbing, walking, exposure to
different environmental influences as well as estimated percentage of time.
 You may also include the description of mental and emotional
environment under which a worker regularly perform the job
 The type of equipment, tools, instruments, machine or other similar
objects used are also important to list.
Section VII: Minimum Qualifications
 This section will check the qualification of such worker. Certifications,
licenses or registrations require.
 Indicate also the minimum level of education that would prepare someone
to perform his/her job

26
 Minimum number of years of prior experience as well as the type of
experience needed to be prepared to perform the job
Section VIII: Primary Purpose (Position Objective)
 This is where a worker can tag or lists down a summary of his/her job.
Another important classification of Job Analysis Questionnaire is the Saville
& Holdsworth’s, Ltd. –SHL Group Work Profiling System (WPS) designed to help
employee accomplish human resource functions. It is design to yield reports
targeted toward various human resource functions such as individual
development planning , employee selection, and job description.
There are three (3) versions of WPS tied to types of occupations namely:
managerial, service, and technical occupations. The WPS is computer-
administered on-site at a company. It is normally contains structured
questionnaire which measures ability and personality attributes in areas such as:
1. Hearing Skills
2. Sight
3. Taste
4. Smell
5. Touch
6. Body Coordination
7. Verbal Skills
8. Number Skills
9. Complex Management Skills
10.Personality
11.Team Role

27
Some of the basic techniques and purposes of the WPS in determining quality
questionnaire methods of Job Analysis are listed below:
 Choose defensible assessment procedures and methods
 Identify jobs for rotation and cross training
 Identify and define competencies of hiring purposes, career,
development and succession planning
 Document existing jobs in the form of job descriptions and
person specification
 Structure and define new jobs
 Identify performance review measures
 Create job families
 “Transport” validation research
 Create an equitable pay structure
 Identify specific areas of training & development
 Audit skills requirement
 Develop performance management system
 Re-define and merge jobs
 Match candidates against job profiles
 Improve interviewing
 Build Teams
 Manage changes in roles and culture
After determining the purpose and techniques in developing WPS method,
information is collected about a job in structured way from 2 to 4 people who are
currently doing the job through questionnaires then info. Will computerize to
analyze and meet a variety of objectives.

28
Job Analysis Control: Request, Review and other Considerations
In every organization of any size, the organization structure, work
assignments, job duties and responsibilities are subject to change. New job are
established and existing jobs may change either abruptly as a result of re-organization
or gradually over time.
In such cases, it is necessary to analyze and describe new or revised jobs in
order to assure the proper evaluation. As part of controlling the process of job
analysis interview, it is then requested to the management through a supervisors’
initiation and reviewed by the Department Head; when a new job has been
established under the approved organization structure or the duties of an existing job
have significantly changed, the supervisor concerned will initiate a “Request for Job
Analysis” form and submit it through proper channels to the Department Head
concerned. In his request, the job supervisor will outline the main duties of the new
job or the principal revisions.
It is then the Department Head concerned will review the request, ensure its
validity, and forward it to the Human Resources Department for necessary action.
Upon receiving an approval request for Job Analysis, the HR Department will
ensure that the job conforms to the approved organization chart, conduct the
necessary job analysis interview and compile the information on the Job Analysis
Form.

29
In carrying out the analysis of a job and completing the required for, the
following basic aspects must be considered:
1. The facts obtained and recorded must refer to the job and not the job incumbent.
2. The duties and responsibilities must be for the job, as it exists at present rather than for
what the job should be or is thought to be. The minimum requirements must be adequate to
support the satisfactory performance of such duties and responsibilities.
3. The job facts must, in all cases, be verified to ensure that they are accurate, factual and
realistic.
4. The duties of each job must be coordinated with the duties of other jobs, above and below, in
the organizational unit and with related jobs in other parts of the organization.
5. Each duty must be analyzed to ensure that is essential to the operation of the unit.
6. Jobs which are similar in nature and of an equal level of difficulty should be combined,
wherever possible, under the same job title to provide uniformity whilst still permitting
flexibility in work assignment.
7. Where there is more than one incumbent in a job, only one job analysis interview is required.
8. Where the job has more than one application, such as Secretary or Clerk, it is advisable to
obtain details of the applications in the various units in order to ensure adequate coverage.
REVIEW QUESTIONS:
1. Create a comprehensive characterization of Job Analysis and demonstrate.
2. What are the principal uses or applications of Job Analysis in the Field of
Engineering and its manpower?
3. How one does establish the duties, skills, and responsibilities on each
engineering job categories (example: Industrial, Chemical, Manufacturing, etc.)
4. Why is Job Analysis a continuing program in the field of Business &
Engineering?
5. What are the essential characteristics or qualifications of a Job Analyst?

30
6. What method/s of Job Analysis do you consider the most useful in
determining concise and valid information?
7. What are the methods used in Job Analysis. Provide the advantages &
disadvantages of each.
8. Why do you think Job Analysis is an essential tool in developing Human
Resource Strategy in implementing quality service in an Engineering
Enterprise as well as both private and public companies? Use the space given
below.

31
The Job Description & Specification

32
What is a Job Description & Specification?
Job Description (JD), as a management tool, can greatly simplify an
organization’s human resource management. A job description clarifies work
functions and reporting relationship, helping workers to understand their specific
job. Job descriptions aid in maintaining a consistent salary structure and somehow
performance evaluation may be based on JD.
Figure 9. A Sample of Engineering Job Description

33
In simplest term, Job Description may be defined as an abstract of information
derived from the job analysis report, describing the duties performed, the skills,
training, and experience required, the conditions under which the job to the other
jobs in the organization.
Meanwhile, Job Specification (Job Specs.) is the statement of the qualifications
and traits required of the worker so that the/she may perform the job properly. It
specifies the type of employee which the job calls for in terms of skills, experience,
training, and other special qualifications (P. Sison, 1982).
Well written duty statements contain action words which accurately describe
what is being done. Duty statement should focus on primary, current, normal, daily
duties and responsibilities of such position (not incidental duties and employee’s
qualifications or performance, or temporary assignments). Related or similar duties
should be combined and written as one statement.
Each duty statement should be a discreet, identifiable aspect of the work
assignment, described in one to three sentences, and should be outcome-based,
allowing for alternate means of performing the duty, changes in technology,
preferences of workers and supervisors, and accommodations of workers with
disabilities, without altering the nature of the duty itself.
A Duty Statements normally contains three (3) parts: the Verb, the Object,
and the Purpose. Take a look at the table below for examples of functional duty
statements:
Verb Object Purpose
Collects Financial data To evaluate budgetary request
Conducts Analytical studies To support financial planning
& management
Compiles Enrollment data For distribution to
administration
Cleans Computer equipment In adherence with established
schedule

34
Drives Pickup truck with motor fuels To job sites
Repair Equipment Daily, or as needed
Table 1. A Sample of a good Duty Statement
Considering a good planning and design for job description, the study of any
job shall consist of four basic parts namely:
1. Functions description
 This part should identify the description of the functions including
duties performed and the responsibilities involved and also the
relation of the job with other jobs in the company.
2. Minimum personal qualification
 This section identifies the specification of the minimum personal
qualifications n terms of trait, skill, knowledge and ability required
of a worker to discharge his job.
3. Verification & confirmation
 On this stage, Draft must be submitted to the supervisor concerned
for verification and confirmation.
4. Job identification
 This part will identify the final job by its correct title. And therefore,
the title must be reflective of the functions or duties of the job.
On the other hand, an excellent job description basic guideline should identify
and describe the following:
MENTAL FUNCTIONS OPERATIONAL DESCRIPTION
1. Comparing Judging the readily observable functional, structural or

35
compositional characteristic of data, people or things.
2. Copying Transcribing, entering or posting data
3. Computing Performing arithmetic operations and reporting on and/or
carrying out a prescribed action in relation to them.
4. Compiling Gathering, collating, or classifying information about data, people
or things. Reporting and/or carrying out a prescribed action in
relation to the evaluation is frequently involved.
5. Analyzing Examining & evaluating data. Presenting alternative actions in
relation to the evaluation is frequently involved.
6. Coordinating Determining time, place and sequence of operations or action to
be taken on the basis of analysis of data.
7. Synthesizing To combine or integrate data to discover facts and/or develop
knowledge or creative concepts and/or interpretations.
RELATIONS WITH
OTHERS
OPERATIONAL DESCRIPTION
1. Supervision (given) Coordinating and directing the activities of one or more
subordinates
2. Supervision
(received)
Independence of actions; authority to determine methods of
operation
3. Negotiating Exchanging ideas, information and opinions, with others to
formulate policies and programs and/or jointly arrive at decisions,
conclusions, solutions or solve disputes
4. Communicating Talking with and/or listening to and/or signaling people to convey
or exchange information that includes giving/receiving
assignments and/or directions
5. Instructing Teaching subject matter to others, or training other through
explanation, demonstration and supervised practice; or making
recommendations on the basis of technical disciplines.
6. Interpersonal Skills
and Behavior
Dealing with individuals with a range of moods and behaviors in a
tactful, congenial, personal manner so as not alienate or
antagonized them.
7. Control of Others Seizing, holding, controlling, and/or otherwise subduing violent,
assaultive, or physically threatening persons to defend oneself or

36
prevent injury.
PHYSICAL DEMANDS
(Strengths)
1. Sedentary Exerts up to 10 lbs. of force occasionally an/or negligible amount
of force frequently or constantly to lift, carry, push pull, or
otherwise move objects, including the human body. involves
sitting most of the time, but may involve walking or standing for
brief periods of time.
2. Light Exert up to 20 lbs. of force occasionally, and/or up to 10 lbs. of
force frequently, and/or a negligible amount of force constantly to
move objects. Physical demands are in excess of those of
Sedentary work. Light work usually requires walking or standing to
a significant degree.
3. Medium Exert up to 50 lbs. of force occasionally, and/or up to 20 lbs. of
force frequently, and/or up to 10 lbs. of force constantly to move
objects.
4. Heavy Exert up to 100 lbs. of force occasionally, and/or up to 50 lbs. of
force frequently, and/or up to 20 lbs. of force constantly to move
objects.
5. Very Heavy Exert in excess of 100 lbs. of force occasionally, and/or in excess
of 50 lbs. of force frequently, and/or in excess of 20 lbs. of force
constantly to move objects.
PHYSICAL DEMANDS
(Movement)
1. Climbing Ascending or descending using feet and legs and/or hands and
arms. Body agility is emphasized.
2. Balancing Maintaining body equilibrium to prevent falling on narrow,
slippery, or erratically moving surfaces; or maintaining body
equilibrium when performing feats of agility.
3. Stooping Bending body downward and forward. This factor is important if
it occurs to a considerable degree and requires full use of the lower
extremities and back muscles.

37
4. Kneeling Bending legs at knees to come to rest on knee or knees.
5. Crouching Bending body downward and forward by bending legs and spine.
6. Crawling Moving about on hands and knees or hands and feet.
7. Reaching Extending hand(s) and arm(s) in any direction.
8. Handling Seizing, holding, grasping, turning, or otherwise working with
hand or hands. Fingers are involved only to the extent that they
are an extension of the hand.
9. Fingering Picking, pinching, or otherwise working primarily with fingers
rather than with the whole hand or arm as in handling.
10. Feeling Perceiving attributes of objects, such as size, shape, temperature,
or texture, by touching with skin, particularly that of fingertips.
PHYSICAL DEMANDS
(Auditory)
1. Talking Expressing or exchanging ideas by means of the spoken word.
Talking is important for those activities in which workers must
impart oral information to clients or to the public, and in those
activities in which they must convey detailed or important spoken
instructions to other workers accurately, loudly, or quickly.
2. Hearing Perceiving the nature of sounds. Used for those activities which
require ability to receive detailed information through oral
communication, and to make fine discriminations in sounds, such
as when making fine adjustments on running engines.
PHYSICAL DEMANDS
(Taste/Smell)
1. Taste & Smell Distinguishing, with a degree of accuracy, differences or
similarities in intensity or quality of flavors and/or odors, or
recognizing particular flavors and/or odors, using tongue and/or
nose.
PHYSICAL DEMANDS
(Vision)
1. Near Acuity Clarity of vision at 20 inches or less. Use this factor when special
and minute accuracy is demanded.
2. Far Acuity Clarity of vision at 20 feet or more. Use this factor when visual

38
efficiency in terms of far acuity is required in day and night/dark
conditions.
3. Depth Perception Three-dimensional vision. Ability to judge distances and spatial
relationships so as to see objects where and as they actually are.
4. Accommodation Adjustment of lens of eye to bring an object into sharp focus. Use
this factor when requiring near point work at varying distances.
5. Color Vision Ability to identify and distinguish colors.
6. Field of Vision Observing an area that can be seen up and down or to right or left
while eyes are fixed on a given point. Use this factor when job
performance re-quires seeing a large area while keeping the eyes
fixed.
ENVIRONMENTAL
CONDITIONS &
PHYSICAL
SORROUNDINGS
1. Weather Exposure Exposure to hot, cold, wet, humid, or windy conditions caused by
the weather.
2. Extreme Cold Exposure to non weather-related cold temperatures.
3. Extreme Heat Exposure to non weather-related hot temperatures.
4. Wet and/or Humid Contact with water or other liquids; or exposure to non weather-
related humid conditions.
5. Noise Exposure to constant or intermittent sounds or a pitch or level
sufficient to cause marked distraction or possible hearing loss.
6. Vibration Exposure to a shaking object or surface. This factor is rated
important when vibration causes a strain on the body or
extremities.
7. Atmospheric
Conditions
Exposure to conditions such as fumes, noxious odors, dusts,
mists, gases, and poor ventilation that affect the respiratory system,
eyes or, the skin.
8. Confined/
Restricted Working
Environment
Work is performed in a closed or locked facility providing safety
and security for clients, inmates, or fellow workers.
EQUIPMENT USED OPERATIONAL DESCRIPTION

39
1. Office equipments Examples are computer, typewriter, projector, and cassette
player/recorder.
2. Hand Tools (e.g., hammer, shovel, screwdriver)
3. Power Tools (e.g., radial saw, reciprocating saw, drill, pheunomatic hammer)
4. Vehicles (e.g., automobile, truck, tractor, lift)
HAZARDS OPERATIONAL DESCRIPTION
1. Hazardous
Situation
a. Proximity to moving, mechanical parts.
b. Exposure to electrical shock.
c. Working in high, exposed places.
d. Exposure to radiant energy.
e. Working with explosives & exposure to toxic or caustic
chemicals.
Table 2. Job Description design guidelines
Though preparing job description and job specification are not legal
requirements yet play a vital role in getting the desired outcome. These data sets help
in determining the necessity, worth and scope of a specific job.
The main purpose of a Job Description is to collect job-related data in order
to advertise for a particular job. It helps in attracting, targeting, recruiting and
selecting the right candidate for the right job. It s done to determine what needs to
be delivered in a particular job; it clarifies what workers are supposed to do if
selected for that particular job opening. Also, it provides staff a clear view what kind
of candidate is required by a particular department or division to perform a specific
task or job.
Job Description and Job Specification are two integral parts of job analysis.
They define a job fully and guide both employer and employee on how to go about
the whole process of recruitment and selection.

40
Figure 10. Job Analysis & its components
Both data sets are extremely relevant for creating a right fit between job and
talent, evaluate performance and analyze training needs and measuring the worth of
a particular job.
Moreover, Job Specification translates the job description into terms of the
human qualifications, which are required for performance of a job. They are
intended to serve as a guide in hiring and job evaluation.
Job Specification is a written statement of qualifications, traits, physical and mental
characteristics that an individual must possess to perform the job duties and discharge
responsibilities effectively – developed effectively with the co-operation of personnel
department and various technical supervisors in the whole organization .

41
Job Specification Information
The first step in programming job specification is to prepare a list of all jobs
in the company and where they are located. The second step is to secure and write
up information about each of the jobs in a company that is usually information
about each of the jobs in a company. Usually this information includes:
1. Physical specifications: - Physical specifications include the physical
qualifications or physical capacities that vary from job to job. Physical
qualifications or capacities
2. Include Physical Features like height, weight, chest, vision, hearing, ability to
lift weight, ability to carry weight, health, age, capacity to use or operate
machines, tools, equipment etc.
3. Mental specifications: - Mental specifications include ability to perform,
arithmetical calculations, to interpret data, information blue prints, to read
electrical circuits, ability to plan, reading abilities, scientific abilities, judgment,
ability to concentrate, ability to handle variable factors, general intelligence,
memory etc.
4. Emotional and social specifications: - Emotional and social specifications
are more important for the post of managers, supervisors, foremen etc. These
include emotional stability, flexibility, social adaptability in human
relationships, personal appearance including dress, posture etc.
5. Behavioral Specifications: - Behavioral specifications play an important role
in selecting the candidates for higher-level jobs in the organizational hierarchy.
This specification seeks to describe the acts of managers rather than the traits
that cause the acts. These specifications include judgments, research,
creativity, teaching ability, maturity trial of conciliation, self-reliance,
dominance etc.

42
REVIEW QUESTIONS:
1. Create a simple job description for the following engineering post:
 Cadet Civil Engineering (for DSH Railway Construction)
 Junior Electrical Engineer (for Toms Electric Cooperative)
 Engineering Manager (knowledgeable in Six Sigma: for multinational
company specializing in oil and crude industry)
2. Design a psychological test or special aptitude test for a Mechanical
Engineering job description to determine manual dexterity, ingenuity &
judgment.
3. Gather at least (15) fifteen engineering job post and develop its job
description and requirements based on the current market and industrial
demand.

0
RECOMMENDED READINGS
A. Books
Bartram, Dave, (2005). The Great Eight Competencies: A Criterion-Centric Approach to
Validation Journal of Applied Psychology 2005, Vol. 90, No. 6, 1185–1203
Bemis, Stephen E., Holt-Belenky, Ann, Soder, Dee Ann (1983). Job Analysis: an
Effective Management Tool, Washington, D.C., Bureau of National Affairs.
Cascio, Wayne F., Aguinis, Herman. (2011). Applied Psychology in Human Resource
Management, Seventh Edition. Upper Saddle River New Jersey, Prentice Hall
Shippmann, Jeffery S., Ash, Ronald A, Battista, Mariangela, Carr, Linda, Eyde, Lorraine,
D., Pearlman, Kennery, Prien, Erich P., Sanchez, Juan I. (2000) The practice of
competency modeling. Personnel Psychology, Vol. 53, pp703-740
Sison, Perfecto. Personnel and Human Resources Management, Manila. Rex Publishing, 1982
B. E-books & Internet
Hurst, Carol L. “Position Analysis Questionnaire”. Arizona State University
ASU Office of Human Resources
“Job Analysis for changing workplace” available at orkspace.library.yorku.ca
“HR Guide to the Internet: Job Analysis” available at http://www.job-analysis.net/
“Job Description” available at http://www.psnacet.edu.in/
“Job Analysis & Description” available at https://www.aub.edu.lb/
“Importance of Job Analysis” available at http://www.educationobserver.com/
“Job Description & Job Specification” available at http://managementstudyguide.com

Engineering Job Analysis, Description & Specification I

More Related Content

What's hot (20)

Similar to Engineering Job Analysis, Description & Specification I (20)

More from Henry John Nueva (8)

Recently uploaded (20)

Engineering Job Analysis, Description & Specification I