Engineering Visualization Module-5

ENGINEERING VISUALIZATION
Course Code 21EVN15/25 CIE Marks 50
Teaching Hour/Week (L:T:P:S) 2:0:2:0 SEE Marks 50
Total Hours of Teaching - Learning 40 Total Marks 100
Credits 03 Exam Hours 03
As Per the VTU Syllabus
Dr. Mohammed Imran

COURSE LEARNING OBJECTIVES:
CLO1: To understand the basic principles and conventions
of engineering drawing.
CLO2: To use drawing as a communication mode.
CLO3: To generate pictorial views using CAD software.
Dr. Mohammed Imran
CLO3: To generate pictorial views using CAD software.
CLO4: To understand the development of surfaces.
CLO5: To visualise engineering components

TEACHING-LEARNING (GENERAL INSTRUCTIONS):
 Students should be made aware of powerful engineering communication tool
– Drawing.
 Simple Case studies can be suitably selected by the teacher for hands on
practice to induce the feel of fruitfulness of learning.
 Appropriate Models, Power Point presentation, Charts, Videos, shall be used
to enhance visualization before hands on practice.
 For application problems use very generally available actual objects.
Dr. Mohammed Imran
 For application problems use very generally available actual objects.
(Example: For rectangular prism / object; matchbox, carton boxes, book, etc
can be used. Similarly for other shapes)
 Use any CAD software for generating orthographic and pictorial views.
 Make use of sketch book with graph sheets for manual / preparatory
sketching

Module 5
Multidisciplinary Applications & Practice (For CIE Only):
Free hand Sketching: True free hand, Guided Free hand, Roads, Buildings, Utensils, Hand
tools & Furniture’s etc
Drawing Simple Mechanisms: Bicycles, Tricycles, Gear trains, Ratchets, two wheeler cart
& Four wheeler carts to dimensions etc
& Four wheeler carts to dimensions etc
Electric Wiring and lighting diagrams: Like, Automatic fire alarm, Call bell system, UPS
system, Basic power distribution system using suitable software.
Basic Building Drawing: Like, Architectural floor plan, basic foundation drawing, steel
structures- Frames, bridges, trusses using Auto CAD or suitable software,
Electronics Engineering Drawings: Like, Simple Electronics Circuit Drawings.
Graphs & Charts: Like, Column chart, Pie chart, Line charts, Gantt charts, etc. using
Microsoft Excel or any suitable software.
Dr. Mohammed Imran

Course outcomes
At the end of the course the student will be able to:
CO-1. Understand and visualize the objects with definite
shape and dimensions
CO-2. Analyze the shape and size of objects through different
CO-2. Analyze the shape and size of objects through different
views
CO-3. Develop the lateral surfaces of the object
CO-4. Create a 3D view using CAD software.
CO-5. Identify the interdisciplinary engineering components or
systems through its graphical representation.
Dr. Mohammed Imran

Assessment Details (both CIE and SEE)
 The weightage of Continuous Internal Evaluation (CIE) is 50%
and for Semester End Exam (SEE) is 50%.

 The minimum passing mark for the CIE is 40% of the maximum
marks (20 marks) and that for SEE minimum passing mark is 35%
marks (20 marks) and that for SEE minimum passing mark is 35%
of the maximum marks (18 marks).
 A student shall be deemed to have satisfied the academic
requirements and earned the credits allotted to each subject/
course if the student secures not less than 35% ( 18 Marks out of
50)in the semester-end examination(SEE), and a minimum of 40%
(40 marks out of 100) in the sum total of the CIE (Continuous
Internal Evaluation) and SEE (Semester End Examination) taken
together Dr. Mohammed Imran

Continuous Internal Evaluation (CIE)
 CIE shall be evaluated for max marks 100. Marks obtained shall
be accounted for CIE final marks, reducing it by 50%.
 CIE component should comprise of Continuous evaluation of Drawing
work of students as and when the Modules are covered on the basis of
work of students as and when the Modules are covered on the basis of
below detailed weightage.
 At least one closed book Test covering all the modules on the basis of
below detailed weightage.
 Weightage for Test and Continuous evaluation shall be suitably decided
by respective course coordinators.
Dr. Mohammed Imran

Continuous Internal Evaluation (CIE)
Dr. Mohammed Imran

Semester End Examination (SEE)
 SEE shall be conducted and evaluated for maximum marks 100. Marks
obtained shall be accounted for SEE final marks, reducing it by 50%
 Question paper shall be set jointly by both Internal and External Examiner and
made available for each batch as per schedule. Questions are to be set
preferably from Text Books.
 Evaluation shall be carried jointly by both the examiners.
 Scheme of Evaluation: To be defined by the examiners jointly and the same shall
be submitted to the university along with question paper.
 One full question shall be set from each of the Module from Modules 1,2,3,4
as per the below tabled weightage details.
 However, the student may be awarded full marks, if he/she completes solution on
computer display without sketch.
Dr. Mohammed Imran

Semester End Examination (SEE)
Dr. Mohammed Imran

Suggested Learning Resources:
Text Books
 Bhatt, N.D., Engineering Drawing: Plane and Solid Geometry, 53rd
edition, Charotar Publishing House Pvt. Limited, 2019.
 K. R. Gopalakrishna, & Sudhir Gopalakrishna: Textbook Of Computer
Aided Engineering Drawing, 39th Edition, Subash Stores, Bangalore,
2017
2017
 S. N. Lal: Engineering Drawing with an Introduction to AutoCAD : First-
angle Projection 1st Edition, Cengage, Publication, 2018
 S.N. Lal, & T Madhusudhan:, Engineering Visulisation, 1st Edition,
Cengage, Publication
 Luzadder Warren J., Duff John M., Fundamentals of Engineering
Drawing: with an Introduction to Interactive Computer Graphics for
Design and Production, Prentice-Hall of India Pvt. Ltd., New Delhi,
Eastern Economy Edition, 2005.Dr. Mohammed Imran

Suggested Learning Resources:
Reference Books
 Parthasarathy N. S., Vela Murali, Engineering Drawing, Oxford
University Press, 2015.
 Dhawan R. K., A Textbook of Engineering Drawing, 3/e, S. Chand
Publishing, 2019.
 Venugopal K., Engineering Drawing and Graphics, New Age
International publishers, 2014.
International publishers, 2014.
 Bhattacharya S. K., Electrical Engineering Drawing, New Age
International publishers, second edition 1998,
reprint 2005.
 Chris Schroder, Printed Circuit Board Design using AutoCAD, Newnes,
1997.
 K S Sai Ram Design of steel structures, , Third Edition by Pearson
 Nainan p kurian Design of foundation systems, Narosa publications
 A S Pabla, Electrical power distribution, 6th edition, Tata Mcgraw hill
Dr. Mohammed Imran

Module 5
Free hand Sketching:
True free hand,
Guided Free hand,
Guided Free hand,
Roads,
Buildings,
Hand tools &
Furniture’s etc
Dr. Mohammed Imran

Module 5
Drawing Simple Mechanisms:
Bicycles,
Tricycles,
Tricycles,
Gear trains,
Ratchets,
Two wheeler cart &
Four wheeler carts to dimensions etc
Dr. Mohammed Imran

Module 5
Electric Wiring and lighting diagrams:
 Automatic fire alarm,
 Call bell system,
 Call bell system,
 UPS system,
 Basic power distribution system using suitable software.
Dr. Mohammed Imran

Module 5
Basic Building Drawing:
Architectural floor plan,
basic foundation drawing,
basic foundation drawing,
Steel structures-
Frames,
bridges,
Trusses using Auto CAD or suitable software,
Dr. Mohammed Imran

Module 5
Electronics Engineering Drawings:
 Simple Electronics Circuit Drawings.
 Simple Electronics Circuit Drawings.
Dr. Mohammed Imran

Module 5
Multidisciplinary Applications & Practice
(For CIE Only):
Graphs & Charts:
Column chart,
 Column chart,
 Pie chart,
 Line charts,
 Gantt charts, etc.
 Using Microsoft Excel or any suitable software.
Dr. Mohammed Imran

Furniture’s
Dr. Mohammed Imran

Gear trains
Dr. Mohammed Imran

Two wheeler cart
Dr. Mohammed Imran

Four wheeler carts to dimensions
Dr. Mohammed Imran

Automatic fire alarm
Dr. Mohammed Imran

Call bell system
Dr. Mohammed Imran

Architectural floor plan,
Dr. Mohammed Imran

Basic foundation drawing
Dr. Mohammed Imran

Trusses using Auto CAD
Dr. Mohammed Imran

Column chart,
Dr. Mohammed Imran

Line charts
Dr. Mohammed Imran

Gantt charts
Dr. Mohammed Imran

Using suitable software
Dr. Mohammed Imran

Engineering Visualization Module-5

More Related Content

What's hot (20)

Similar to Engineering Visualization Module-5 (20)

More from Mohammed Imran (20)

Recently uploaded (20)

Engineering Visualization Module-5