Excel tips and Tricks (XL - Power)

XL-Power
Excel Champs
Presents
Top 100 Excel Tips and Tricks
to Make you a POWER EXCEL
USER in 2019
the e-book

WWhhyy TThhiiss EE--BBooookk
Every Excel user do need a list of tips and tricks which he/she can use to
learn to save time.
Even if you learn a single tip a day you can learn 30 new things in a
month.
It's a lot.
But the point is, you must have a list which you can refer to every day.
Well, you don’t need to worry about this anymore, I’m here to help. I have
listed Top 100 Excel Tips and Tricks for you.
And this is the most comprehensive list.
Yes, it is.
All the tips and tricks are listed under a specific category which makes
easy to follow the entire list.
In this entire list, I have marked some of my favorite tips 🔥 which I love to
use and I’m sure you’ll also love them.
…with love
Puneet
P.S. This copy is purely dedicated to you. You can use it in several ways. Save it in your laptop, mobile, take a
printout, and please, no need to say thanks. But you can’t sell it or you can’t make a change in it because all
rights of this copy are with ExcelChamps.com. If you want some changes in it or some addition to it, you can mail

IInnddeexx
I. Basic
II. Formatting
III. Formulas
IV. Charting
V. Printing
VI. Advanced
VII. Data Cleansing
VIII. Mouse
IX. One Time Set-Up
X. Time Saver

BBaassiicc TTiippss
If you are just starting out with Excel, then these tips can save you a lot
of time and can help you to get better quickly in everyday tasks.

11.. AAdddd aa SSeerriiaall NNuummbbeerr CCoolluummnn
If you work with large data then it’s better to add a serial number column
to it.
For me, the best way to do this is to apply the table to the data…
…and then add 1 in the above serial number, just like below.
To do this, you simply need to add 1 to the first cell of the column…
…and then create a formula to add 1 to the above cell’s value.
As you are using a table, whenever you create a new entry in the table,
Excel will automatically drop down the formula…
…and you’ll get the serial number.

22.. CCuurrrreenntt DDaattee aanndd TTiimmee
The best way to insert the current date and time is to use NOW function...
...which takes date and time from the system and returns when you insert
it in a cell.
The only problem with this function is it’s volatile...
...and whenever you recalculate something it updates its value and if you
don’t want to do this...
...the best way is to convert it into value.
Otherwise, you can use below VBA code...
Sub timeStamp()
Dim ts As Date
With Selection
.Value = Now
.NumberFormat = "m/d/yyyy h:mm:ss AM/PM"
End With
End Sub
or these methods to insert a timestamp in a cell.

33.. SSeelleecctt NNoonn--AAddjjaacceenntt CCeellll 🔥🔥
Normally we all do it this way, hold the control key and the select cells
one by one.
But I have found that there is a far better way for this.
All you have do is, select the first cell and then press SHIFT + F8, this gives
you add or remove selection mode in which you can select cells by just
selecting them.
…here’s the full tip

44.. AAdddd SSoorrtt BBuuttttoonnss ttoo QQAATT
If you deal with the data which needs to sort frequently...
...then...
...it’s better to add a button to the quick access toolbar (if it's not there
already).
All you need to do is click on the down arrow on the quick access
toolbar...
...and then select “Sort Ascending” and “Sort Descending”.
It adds both of the buttons to the QAT for “Ascending” and “Descending”.

55.. MMoovvee DDaattaa uussiinngg SSiimmppllee DDrraagg aanndd DDrroopp
Just think this way...
...you have a small data table and you want to move it from one section of
your worksheet from another.
I’m sure you think about copy-paste but you can also use drag-drop for
this.
And all you need to do is select the range of cells where you have data...
...and then click on the border of the selection.
By holding it move to the place where you need to put it.

66.. UUssee SSttaattuuss BBaarr ffoorr QQuuiicckk IInnssiigghhttss 🔥🔥
The status bar is always there but we hardly use it to the full.
If you right click on it you can see there hell lot of things which you can
check using status bar.
By holding it move to the place where you need to put it.

77.. CCooppyy PPaassttee DDaattaa ffrroomm CClliippbbooaarrdd
There is a problem with normal copy-paste that you can only use a single
value at a time.
But here is the kicker:
When you copy a value, it goes to the clipboard...
...and if you open the clipboard you can paste all the values which you
have copied.
To open a clipboard, click...
...on the go to Home Tab ➜ Editing and then click on the down arrow.
It will open the clipboard on the left side of the window and you can
paste values from there.

88.. IInnsseerrtt BBuulllleett PPooiinnttss iinn EExxcceell
The easiest way to insert bullet point in Excel is by using custom
formatting...
...and here are the steps for this:
Press Ctrl + 1 and you will get the "Format Cell" dialog box and under the
number tab, select custom.
In type input bar, enter the following formatting.
● General; ● General; ● General; ● General
Click OK and now, whenever you insert a value in the cell Excel will add a
bullet before that.

99.. QQuuiicckkllyy CCrreeaattee aa CCooppyy ooff tthhee WWoorrkksshheeeett
To create a copy of a worksheet in the same workbook drag and drop in
the best way.
Now, whenever you insert a value in the cell Excel will add a bullet before
that.

1100.. MMuullttiippllee UUnnddoo--RReeddoo uussiinngg BBuuttttoonnss
Just like sort buttons you can also add undo and redo buttons to the QAT.
The best part about that buttons is you can use them to undo to a
particular activity without pressing the shortcut key again and again.

FFoorrmmaattttiinngg TTiippss
Formatting is one of the boring things when it comes to data and
reporting and here, we have some of the time saver formatting tips for
you which you can use in your daily work.

1111.. QQuuiicckk FFoorrmmaattttiinngg wwiitthh AAUUTTOO FFOORRMMAATT OOppttiioonn
If you deal with financial data then auto format can be one of your best
tools.
It simply applies to format to small as well as large data especially when
data is in tabular form.
First, you need to add it to the quick access toolbar (here are the steps).
After that, whenever you need to apply to format, just select the data
where you want to add it…
…and click on the AUTO FORMAT button from quick access toolbar.
It will show you a window to select the formatting type and after
selecting that click OK.
The auto format is a combination of six different formatting and you have
the option to disable any of them while applying it.

1122.. CCooppyy PPaassttee FFoorrmmaattttiinngg uussiinngg FFoorrmmaatt PPaaiinntteerr
The simple idea with the format painter is to copy and paste formatting
from one section to another.
Let’s say you have specific formatting (Font, Cell Color, Bold, Border, etc.)
in the range A1: A5...
...you can copy that formatting to range C1: C5 with a click.
First of all, select the range A1: A5.
After that, go to the Home Tab ➜ Clipboard and then click on “Format
Painter”.
Now select the cell C1 and it will automatically apply the formatting on C1:
C5.

The format painter is fast and makes it easy to apply to format from one
section to another.
Even you can also apply formatting multiple times, you can read more
about it from here.

1133.. AAdddd aa MMeessssaaggee ttoo aa CCeellll ttoo DDiissppllaayy
Let’s say you need to add a specific message to a cell, like “Don’t delete
the value ”, “enter your name” or something like that.
In this case, you can add a cell message for that particular cell.
When the user will select that cell it will show the message you have
specified.
Here are the steps to do this:
• First of all, select the cell for which you want to add a message.
• After that, go to the Data Tab ➜ Data Tools ➜ Data Validation ➜ Data
Validation.
• In the data validation window, go to the Input Message tab.
• Enter title, message and make sure to tick mark “Show input message
when the cell is selected”.
• In the end, click OK.

Once the message is showed you can drag and drop it to change its
position.

1144.. AAppppllyy SSttrriikkeetthhrroouugghh ttoo aa CCeellll
Unlike Word, in Excel, there is no option on the ribbon to apply
strikethrough.
But I have figured out that there are 5 ways to do it and easiest from all of
them is a keyboard shortcut.
All you need to do it select the cell where you want to apply the
strikethrough and use the below keyboard shortcut.
Control + 5
…and if you are using MAC then here the shortcut.
⌘ + ⇧ + X
Quick Note: You can use the same shortcuts keys if you need to do this
for partial text in a cell.

1155.. CCrreeaattee aa BBaarr CCooddee iinn EExxcceell
It’s one of those secret tips which most of the Excel users are unaware.
To create a bar-code in Excel all you need to do it install this bar-code
font from ID-AUTOMATIC.
Once you install this font, you will have to type the number in a cell for
which you want to create a bar-code and then apply the font style.
learn more about this tip from here

1166.. SShhooww DDaattee aass aa MMoonntthh//YYeeaarr iinn aa CCeellll
Alright, let’s say you have a date in a cell and you want that date to show
for a month...
...or a year, and for this, you can apply custom formatting.
• First of all, select the cell with a date and open formatting options (use
Ctrl + 1).
• Select the “Custom” option and add “MMM” or “MMMMMM” for the
month or “YYYY” for the year format.
Custom formatting just changes the formatting of the cell from date to
year/month but the value remains the same.

1177.. HHiigghhlliigghhtt BBllaannkk CCeellllss uussiinngg GGoottoo OOppttiioonn
When you work with large data sheets it’s hard to identify the blank cells
from it.
So, the best way is to highlight them by applying a cell color.
Here are the steps to do this.
• First, select all the data from the worksheet using the shortcut key Ctrl
+ A.
• After that, go to Home Tab ➜ Editing ➜ Find & Select ➜ Go To Special.
• From Go To Special dialog box, select Blank and click OK.

• At this point, you have all the blank cell selected and now apply a cell
color using font settings.
That’s it…
...but you can also use conditional formatting for this

1188.. CCoolloorr FFoonntt wwiitthh CCuussttoomm FFoorrmmaattttiinngg
In Excel, we can apply custom formatting and in custom formatting, there
is an option to use font colors (limited but useful
For example, if you want to use Green color for positive numbers and red
color for negative numbers then you need to use the custom format.
[Green]#,###;[Red]-#,###;0;
To apply this all you need to do is:
• First, select the cells where you want to apply this format.
• After that open format option using keyboard shortcut Ctrl + 1 and go
to “Custom” category and the custom format in the input dialog box.

1199.. CCrreeaattee aa CCuussttoomm FFoonntt//CCoolloorr TThheemmee
We all have some favorite fonts and colors which we use in Excel.
Let’s say you received a file from your colleague and now you want to
change the font and colors for the worksheet from that file.
The point is, you need to do this one by one for each worksheet which
takes time.
But, if you create a custom theme with your favorite colors and font then
you can change the style of the worksheet with a single click.
For this, all you have to do is apply your favorite designs to the tables,
colors to the shapes and charts, font style and then save it as a custom
theme.
Here’s how to do it.
• Once you are done with your formatting, go to Page layout ➜ Tab
Themes ➜ Themes ➜ Save Current Theme.
• It opens a “Save As” dialog box, name your theme and save it.

• And now, every time you need just one click to change any worksheet
style to your custom style.

2200.. CClleeaarr FFoorrmmaattttiinngg ffrroomm SSeelleecctteedd CCeellllss
This is a simple keyboard shortcut which you can use to clear formatting
from a cell or range of cells.
Alt + H + E + F
Or, otherwise, you can also use clear formatting option from the Home
Tab.
Home Tab ➜ Editing ➜ Clear ➜ Formats.

FFoorrmmuullaa TTiippss
Formulas and functions are the core power of Microsoft Excel. In short,
they can make you great and here we have some formula tips which can
make you smart.

2211.. NNoorrmmaall TTeexxtt CCaassee ttoo SSeenntteennccee CCaassee
In Excel, we have three different functions (LOWER, UPPER, and PROPER)
to convert a text into different cases.
But there is no option to convert a text into sentences case.
Here is the formula which you can use:
=UPPER(LEFT(A1,1))&LOWER(RIGHT(A1,LEN(A1)-1))
This formula converts the first letter of a sentence into capital and rest of
all in small...
...learn how this formula works

2222.. FFoorrmmuullaa ttoo GGeenneerraattee RRaannddoomm NNuummbbeerrss
In Excel, there are two specific functions which you can use to generate
random numbers.
First is RAND which generates random numbers between 0 and 1.
And second is RANDBETWEEN which generates the random numbers
within the range of two specific numbers.
ALERT: These both functions are volatile so whenever you re-calculate
your worksheet or hit enter they update their values so make sure to use
them with a caution.
You can also use RANDBETWEEN to generate random letters as well.

2233.. CCoouunntt WWoorrddss ffrroomm aa CCeellll iinn EExxcceell
In Excel, there is no specific function to count words.
You can count characters with LEN but not words. But, you can use the
following formula which can help you to count words from a cell.
=LEN(A1)-LEN(SUBSTITUTE(A1,” “,””))+1
This formula counts the number of spaces from a cell and adds 1 to it
after that which equals the total number of words in a cell.

2244.. CCaallccuullaattee PPeerrssoonn’’ss AAggee uussiinngg DDAATTEEDDIIFF
The best way to calculate a person’s age is by using the DATEDIF
function.
This mysterious function is specifically made to get the difference
between two dates.
And the formula will be:
=”Your age is “& DATEDIF(Date-of-Birth,Today(),”y”) &”
Year(s), “& DATEDIF(Date-of-Birth, TODAY(),”ym”)& ” MONTH(s) &
“& DATEDIF(Date-of-Birth,TODAY(),”md”)& ” Day(s).”
Make sure to replace “Date-of-Birth” with your actual date of birth.

2255.. SSiimmppllee FFoorrmmuullaa ttoo CCaallccuullaattee RRaattiioo
I have figured out that there are 4 different ways to calculate ratio in
Excel but using a simple divide method is the easiest one.
All you need to do is divide the larger number into the smaller one
concatenates it with a colon and one and here’s the formula you need to
use:
=Larger-Number/Smaller-Number&”:”&”1″
This formula divides the larger number with the smaller so that you can
take the smaller number as a base (1).

2266.. CCaallccuullaattee NN RRoooott ooff NNuummbbeerr
To calculate square root, cube root or, any root of a number the best way
is to use exponent formula.
In exponent formula, you can specify the Nth number for which you want
to calculate the root.
=number^(1/n)
For example, if you want to calculate a square root of 625 then the
formula will be:
=625^(1/2)

2277.. TToottaall DDaayyss iinn MMoonntthh
To get a total number of days in a month dynamically you can use the
following formula:
=DAY(EOMONTH(TODAY(),0))

2288.. GGeett MMoonntthh’’ss llaasstt DDaattee
To simply get the last date of a month you can use the following dynamic
formula.
=DATE(YEAR(TODAY()),MONTH(TODAY())+1,0)

2299.. UUssee IINNDDEEXX MMAATTCCHH ttoo LLooookkuupp ttoo LLeefftt
As we all know there is no way to look up to left for a value using
VLOOKUP.
But if you switch to INDEX MATCH you can look up in any direction.
…check this most amazing guide on INDEX and MATCH

3300.. SSUUMMPPRROODDUUCCTT IIFF ttoo CCrreeaattee aa CCoonnddiittiioonnaall FFoorrmmuullaa
You can use below formula to create a conditional SUMPRODUCT and
product values using a condition.
=SUMPRODUCT(–(C7:C19=C2),E7:E19,F7:F19)
...click here to learn everything about this formula

CChhaarrttiinngg TTiippss
To make you better at charting, here some of my favorite tips and I’m
pretty sure that these charting tips will help you to create charts in a
smart way.

3311.. MMaakkee SSmmooootthh LLiinnee iinn aa LLiinnee CChhaarrtt
If you love to use line chart, then you are awesome but it would be more
awesome if you use a smooth line in the chart.
This will give a smart look to your chart.
Here are the steps:
• Select data line in your chart and right click on it.
• Select “Format Data Series”.
• Go to Fill & Line ➜ Line ➜ Tick mark “Smoothed Line”.

3322.. CCooppyy aanndd PPaassttee CChhaarrtt FFoorrmmaattttiinngg
This charting tip is a game changer, I’m telling you.
Let’s say you want to create 10 charts with the same formatting.
What will you do? Format each chart one by one?
No, all you need to do just copy and paste formatting from one chart to
another.
Here are the steps to follow:
• Select your chart which you have formatted & copy it.
• Now, select the chart where you want to paste that formatting.
• Go to Home Tab ➜ Paste ➜ Paste Special ➜ Formats.
• Click OK.

3333.. HHiiddee AAxxiiss LLaabbeellss
This charting tip is simple but still quite useful.
If you don’t want to show axis label values in your chart you can delete
them.
But the better way is to hide them instead of deleting.
Here are the steps:
• Select Horizontal/Vertical axis in the chart.
• Go to “Format Axis” Labels.
• In label position, select “None”.
And again, if you want to show it then just select “Next to axis”.

3344.. CChhaannggee DDiissppllaayy UUnniittss iinn aa CChhaarrtt
If you are dealing with the large number in your chart, you can change the
units for your axis values.
Here are the steps:
• Select chart axis your chart and open format “Format Axis” options.
• In axis options, go to “Display Units” where you can select unit for your
axis values.
This will help your users to understand the chart quickly.

3355.. RRoouunndd CCoorrnneerr CChhaarrtt OOppttiioonn
I often use Excel charts with rounded corners and if you like to use round
corners in your chart here are the simple steps.
• Select your chart and open formatting options.
• Go to Fill and Line ➜ Borders.
• In borders sections, tick mark rounded corners.

3366.. HHiiddee EEmmppttyy GGaapp iinn CChhaarrtt
Let’s say if you have a chart with monthly sales in which Jun has no
amount and cell is empty.
You can use the following options for that empty cell.
• Show gap for the empty cell.
• Use zero.
• Connect data points with the line.
Here are the steps to use these options.
• Right, click on your chart & select “Select Data”.
• In select data window, click on “Hidden and Empty Cell”.
• Select your desired option from “Show Empty Cell as”.
Make sure to use “Connect data points with the line” (recommended).

3377.. IInnsseerrtt PPiiccttuurree iinn EExxcceell CChhaarrtt
Yes, you can insert a picture in a chart. It has a limited use but it’s cool to
use an image in your chart.
Here I’m using a bar chart to add an image and the steps are:
• Select the data bar in your chart.
• Go to Fill & Line and in “Fill” option, select picture and texture fill.
• In “Insert Picture From” click on a file to select an image.
• Select “Stack” after that.

3388.. CCrreeaattee aa TTeemmppllaattee aanndd SSaavvee iitt
This is also a time saver tip.
Let’s say if you have a favourite chart formatting which you want to apply
every time you create a new chart.
You can create a chart template to use it anytime in the future and...
…steps are as follow.
• Once you have done with your favourite formatting, right click on it &
select “Save As Template”.
Using save as dialog box, save it in the template folder.
To insert a new with your favourite template, select it from templates in
insert chart dialog.

3399.. CChhaannggee DDeeffaauulltt CChhaarrtt TTyyppee
Again, an insane time saver charting tip.
We can use a shortcut key to insert a chart, but the problem is, it will only
insert the default chart and in Excel, our default chart type is “Column
Chart”.
So if your favourite chart is line chart, then the shortcuts is useless for
you.
But let’s conquer this problem.
All you have to do is change your default chart and here are the steps for
this:
• Go to Insert Tab ➜ Charts.
• Click on the arrow at the bottom right corner.
• Then in your insert chart window, go to “All Charts” and then select
chart category.
• Right, click on the chart style which you want to make your default
Select “Set As Default Chart”.
• Click OK.

4400.. SShhooww DDaattaa ffoorr HHiiddddeenn CCeellllss
When you hide a cell from the data range of your chart, it will also hide
from the chart as well.
And if you want not to hide data values from your chart even a cell is
hidden, just follow these steps.
• Select your chart and right click on it.
• Go to ➜ Select Data ➜ Hidden and empty cells.
• From the pop-up window, tick mark “Show data in hidden rows and
columns”.

PPrriinnttiinngg TTiippss
In my clarity, one of the most time-consuming things in Excel is
printing reports. So many times, we need to adjust custom margins,
scaling, or adding a header and footers. Here is the list of some awesome
printing tips which you can use will printing your reports

4411.. PPrriinntt TTiittllee
Let’s say you headings in your table and you want to print those headings
on every page you print.
In this case, you can fix “Print Titles” to print those headings on each
page.
Here’s how to do this:
• Go to “Page Layout Tab” ➜ Page Set Up ➜ Click on Print Titles.
• Now in the page setup window go to sheet tab and specify following
things.
Print Area: Select the entire data which you want to print.
Rows to repeat at the top: Heading row(s) which you want to repeat on
every page.
Columns to repeat at the left: Column(s) which you want to repeat at the
left side of every page (if any).
In the end, click OK.
Now the row and column you have selected will repeat for each page.

4422.. DDeeffiinnee PPaaggee OOrrddeerr ffoorr PPrriinnttiinngg
Specifying page order is quite useful when you want to print large data.
All you need to do:
Go to File Tab ➜ Print ➜ Print Setup ➜ Sheets Tab.
Now here, you have two options:
The First Option: To print your pages using a vertical order.
The Second Option: To print your pages using a horizontal order.

4433.. PPrriinntt CCoommmmeennttss
If you use comments in your reports then you can print them while
printing reports.
Using this option, at the end of the all printed pages, you’ll get a list of all
the comments.
Here are the steps:
Go to File Tab ➜ Print ➜ Print Setup ➜ Sheets Tab.
In print section, select “At the end of the sheet” using comment drop
down.
Click OK.

4444.. SSccaallee ttoo FFiitt ttoo PPrriinntt iinn oonnee PPaaggee
Sometimes we struggle to print entire data on a single page.
In this situation, you can use the “Scale to Fit” option to adjust the entire
data into a single page.
• Go to File Tab ➜ Print ➜ Print Setup ➜ Page Tab.
• Next, you need to adjust two options:
1. First, adjust using a % of normal size.
2. Second, specify the number of pages in which you want to
adjust your entire data using width and length.
Now you can take a print out on a single page.

4455.. AAdddd aa CCuussttoomm HHeeaaddeerr--FFooootteerr
Instead of using page numbers in header and footer, you can also use
custom header and footer.
• Go to File Tab ➜ Print ➜ Print Setup ➜ Header/Footer.
• Click on custom header or footer button.
• Here you can select alignment of the header/footer.

• And following options can be used:
✓ Page Number
✓ Page Number with total pages.
✓ Date
✓ Time
✓ File Path
✓ File Name
✓ Sheet Name
✓ Image
The best use of this option is for adding copyright text (just a thought).

4466.. PPrriinntt DDaattaa oonn tthhee CCeenntteerr ooff tthhee PPaaggee
Let’s say you have fewer data to print on a page.
In this case, you can align them with the center of the page while
printing. Follow these steps:
• Go to File Tab ➜ Print ➜ Print Setup ➜ Margins.
• In “Center on Page” you have two options to select.
3. Horizontally: Aligns data to the center of the page.
4. Vertically: Aligns data to the middle of the page.
This option is quite useful when you need to print some specific formats
on a page.
It makes it rightly aligned on a page.

4477.. SSppeecciiffyy aa RRaannggee ooff CCeellll aass PPrriinntt AArreeaa
Let’s say you have some specific data in a range and you want to print
only that range.
Now, the simple way is to select that range and use the option “print
selection”.
But, what if you have to print that range frequently.
Well in this case, you can specify the printing area and can print it without
selecting the range every time.
• Go to File Tab ➜ Print.
• Once you click on print, you’ll get an instant print preview.
• Now, from the bottom right side of the window, click on”Show
Margins” button.
It will show all the margins applied and you can change them by just drag
and drop.

4488.. SSppeecciiffyy CCuussttoomm MMaarrggiinn ffoorr tthhee PPaaggee
You know what I mean.
• Go to File Tab ➜ Print.
• Once you click on print, you’ll get an instant print preview.
• Now, from the bottom right side of the window, click on”Show
Margins” button.
It will show all the margins applied and you can change them by just drag
and drop.

4499.. RReemmoovvee EErrrroorr VVaalluueess wwhhiillee PPrriinnttiinngg
The thing is, you can replace all the error values while printing with
another specific value.
Well, you have only three other values to use as a replacement.
Here are the steps:
• Go to File Tab ➜ Print ➜ Print Setup ➜ Sheet.
• Select replacement value from “Cell error as” drop down.
• You have three options to use as a replacement.
5. Blank
6. Double minus sign.
7. “#N/A” error for all the errors.
• After selecting the replacement value, click OK.
I believe using “Double minus sign” is the best way to present errors in a
report while printing it on a page.

5500.. SSttaarrtt PPaaggee NNuummbbeerr wwiitthh aa CCuussttoomm NNuummbbeerr
If you want to start page number from a custom number (5).
Well, you have only three other values to use as a replacement.
You can specify that number and rest of the pages will follow that
sequence.
• Go to File Tab ➜ Print ➜ Print Setup ➜ Page.
• In the input box “First page Number”, enter the number from you want
to start you page numbers.
Important Note: This option will only work if you have applied
header/footer in your worksheet.

AAddvvaanncceedd TTiippss
There are some options in Microsoft Excel which are meant to perform a
specific function and can help you to get better at Excel in no time and
here I have listed some of those tips and tricks which you can use in your
daily work.

5511.. TTrraacckkiinngg IImmppoorrttaanntt CCeellllss wwiitthh WWaattcchh WWiinnddooww
Sometimes we need to track some important cells in a workbook...
...and for this, the best way is to use the watch window.
In the watch window, you add those important cells and then get some
specific information about them in one place (without actually navigating
to each cell).
Here are the steps to use it:
• First of all, go to Formula Tab ➜ Formula Auditing ➜ Watch Window.
Now in “Watch Window” dialog box, click on “Add Watch”.
After that select the cell or range of cells which you want to add and click
OK.
Once you hit OK you’ll some specific information about the cell(s)...
...in the watch window learn more about it from here.

5522.. EExxttrraacctt ddaattaa wwiitthh FFllaasshh FFiillll
Flash fill is one of my favourite options to use in Excel.
It’s like a copycat, perform the task which you have performed.
…let me give you an example.
Here are the steps to use it:
You have dates in the range A1: A10 and now, you want to get the month
from the dates in the B column.
All you need to do is to type the month of the first date in the cell B1 and
then come down to cell B2 and press the shortcut key CTRL + E.
Once you do this it will extract the month from the rest of the dates, just
like below.

5533.. CCoommbbiinnee MMuullttiippllee WWoorrkksshheeeett iinnttoo OOnnee
I’m sure somewhere in the past you have received a file from your
colleague...
...where you have 12 different worksheets for 12 months data.
In this case, the best solution is to combine all of those worksheets using
the “Consolidate” option and here are the steps for this.
• First of all, add a new worksheet and then go to Data Tab ➜ Data Tools
➜ Consolidate.
• Now in the “Consolidate” window, click on the upper arrow to add the
range from the first worksheet and then click on the “Add” button.
• Next, you need to add references from all the worksheets using the
above step.

5544.. UUssee aa PPaasssswwoorrdd ffoorr yyoouurr WWoorrkkbbooookk ttoo PPrrootteecctt iitt
Adding a password to a workbook is quite simple, here are the steps.
• While saving a file when you open a “Save As ” dialog box go to Tools
General Options.
• Add a password to for “Password to Open” and click OK.
• Re-enter the password and click OK again.
• In the end, save the file.
Now, whenever you re-open this file it will ask you to enter the password
to open it.

5555.. CCaappttuurree aa LLiivvee IImmaaggee ooff aa RRaannggee
In Excel, using a live image of a table can help you resize it according to
space...
...and to create a live image there are two different ways which you can
use.
One is camera tools and the second is the paste special option.
…here the steps to use camera tool and for paste special use the below
steps.
• Select the rage you want to paste as an image and copy it.
• Go to the cell and right click, where you want to paste it.
• Go to Paste Special ➜ Other Paste ➜ Options Linked Picture.
Make sure to read this guide about camera tool to learn more about
linked images.

5566.. IInn--BBuuiilldd UUsseerr FFoorrmm wwiitthhoouutt VVBBAA
A few of the Excel users know that there is a default data entry form is
there which we can use.
And the best part is there is no need to write a single line of code for this.
Here’s how to use it:
• First, make sure you have a table with headings where you want to
enter the data.
• After that select any of the cell from that table and use the shortcut
key Alt + D + O + O to open the user form.
Make sure to read this guide about camera tool to learn more about
linked images.

5577.. CCrreeaattee aa CCuussttoomm TTaabb iinn tthhee EExxcceell RRiibbbboonn
We all some favourite option or some options which we use frequently.
To access all those options in one place you create tab and add them to
it.
Follow these steps:
• First, go to File Tab ➜ Options ➜ Customize Ribbon.
• Now click on “New Tab” (this will add a new tab).
• After that right click on it and name it and then name the group.
• Finally, we need to add options to the tab and for this go to “Choose
Commands From” and add them to the tab one by one.

5588.. GGooaall SSeeeekk
In simple words, Goal Seek is a problem-solving tool. It helps you find the
input value by proving the value you want in the result.
here is the complete guide to learn about it.

5599.. TTeexxtt ttoo SSppeeeecchh
This is an option where you can make Excel speak the text you have
entered in a cell or a range of cells.
click here read full about this option

6600.. QQuuiicckkllyy CCrreeaattee aa NNaammeedd RRaannggee
To create a named the range the easiest method is to select the range
create it using the “Create from Selection” option.
Here are the steps to do this:
• Select the column/row for which you want to create a named range.
• Right click and click on “Define name…”.
• Select the option to add the name for the named range and click OK.
That's it.

DDaattaa CClleeaannssiinngg TTiippss
If you work with messy data then these simple tips can help you to clean
your data in no time and the best part about these tips is, they are
quick to learn.

6611..RReemmoovvee UUnnwwaanntteedd SSppaaccee ffrroomm aa CCeellll
TRIM function is one of the most powerful functions.
If can simple help you to remove extra spaces from a text string.
Here’s trim’s syntax.
TRIM(text)
All you need to do is refer to the cell from where you want to remove
leading and trailing spaces and it will return the text without those extra
spaces.
• First of all, go to Formula Tab ➜ Formula Auditing ➜ Watch Window.
• Now in “Watch Window” dialog box, click on “Add Watch”.
• After that select the cell or range of cells which you want to add and
click OK.
Once you hit OK you’ll some specific information about the cell(s)...
...in the watch window learn more about it from here.

6622.. RReemmoovvee DDuupplliiccaatteess ffrroomm DDaattaa
One of the most common thing which we face while working with large
data is “Duplicate Values”.
In Excel, to remove these duplicate values is quite simple.
Here’s how to do this.
• First of all, select any of the cells from the data or select the entire
data.
• After that, go to Data ➜ Data Tools ➜ Remove Duplicates.
• At this point, you have “Remove Duplicates” window and from this
window, select/de-select the columns which you want to
consider/not consider while removing duplicate values.
Once you click OK, Excel will remove all the rows from the selected data
where values are duplicate...
...and show a message with the number of values removed and unique
values left.

6633.. MMeerrggee TTeexxtt bbyy uussiinngg FFiillll JJuussttiiffyy
I know five different way merge text from a range but out of those Fill
Justify is my favourite.
It’s one of the less used options in Excel, but worth not to be missed for
any reason.
Let say you have words in the range A1: A5 and you want to concatenate
all of them in a single cell.
Here’s how to do this with fill justify.
• First, make column A enough wide so that the entire text can be
combined into one cell.
• After that, select the entire range.
• Now, go to Home Tab ➜ Editing ➜ Fill ➜ Justify.
Boom! it combined the text from range A1:A5 to cell A1.

6644.. RReemmoovvee aa SSppeecciiffiicc CChhaarraacctteerr
LLeett’’ss ssaayy yyoouu hhaavvee ssoommee tteexxtt vvaalluueess iinn aa ccoolluummnn aanndd ffrroomm tthhoossee vvaalluueess
yyoouu wwaanntt ttoo rreeppllaaccee aa ssppeecciiffiicc cchhaarraacctteerr oorr aa wwoorrdd......
...you can do this simply by find and replace option.
Let say you have words in the range A1: A5 and you want to concatenate
all of them in a single cell.
Here’s how to do this with fill justify.
• All you need to do is select that column and open the find and replace
dialog box.
• After that click on the “Replace” tab.
• Now here, in “Find What” enter the character you want to replace and
make sure to leave “Replace with” blank.
• Now click on “Replace All”.
The moment you click on “Replace All” Excel will remove that particular
character from the entire column.

6655.. MMeerrggee TTeexxtt bbyy uussiinngg FFiillll JJuussttiiffyy
So you have text in multiple cells and you want to combine all the text
into one cell.
No, this time not with fill justify.
We are doing it with a formula.
If you use Office 365, there is new function TEXTJOIN which is a game
changer when it comes to the concatenation of text.
Here’s the syntax:
TEXTJOIN (delimiter, ignore empty, text1, [text2], …)
All you need to do is to add a delimiter (if any), and TRUE if you want to
ignore empty cells, and in the end, refer to the range.

6666.. UUnnppiivvoott DDaattaa uussiinngg PPoowweerr QQuueerryy
Look at the below table you can use it as a report but can use you use it
further as a raw data.
No, you can’t.
But if you convert this table in something like below you can you can use
it easily anywhere.
But if you convert this table in something like below you can you can use
it easily anywhere.
So how to do this?
Power Query
here’s the simple steps you need to follow.

6677.. SSeelleecctt aanndd DDeelleettee aallll tthhee EErrrroorr CCeellllss
Mostly while working with large data it obvious to have error values but
it’s not good to keep them.
The easiest way to deal with these error values is select them and delete
them and these are the simple steps.
• First of all, go to Home Tab ➜ Editing ➜ Find & Replace ➜ Go To
Special.
• In the Go To dialog box, select formula and tick mark errors.
Once you click OK it will select all the errors and then you can simply
delete all by using “Delete” button.

6688.. CCuussttoomm SSoorrtt CCoolluummnn
Let’s say you want to arrange columns from the data using a custom
order.
The normal way is to cut and paste them one by one.
But we also have an out of the box way.
In Excel, you can sort columns just like you sort rows and by using the
same methods you can arrange them in a custom order.
click here to learn this full tip

6699.. CCoonnvveerrtt ttoo TTeexxtt DDaattee iinnttoo aann AAccttuuaall DDaattee
Sometimes you have dates which are stored as text...
...and you can use them in a calculation and further analysis.
To simply convert them back to valid dates you can use DATEVALUE
function.
Learn more about this function and other ways to convert text to date.

7700.. CCoonnvveerrtt NNeeggaattiivvee NNuummbbeerr iinnttoo PPoossiittiivvee
The easiest way to convert a negative number into a positive is by using
ABS function [learn more about ABS] .
And here's how to do this:

MMoouussee TTrriicckkss
We all are eager to learn more keyboard shortcuts so they can work fast.
But there are some tricks which we can perform with a mouse as well
and these are some mouse tricks which you can use to speed up your
work.

7711.. AAppppllyy CCeellll FFoorrmmaatt wwiitthh FFoorrmmaatt PPaaiinntteerr
Before I started to use format painter for applying...
...cell formatting, I was using paste special with the shortcut key.
• Select the cell or a range from where you want to copy cell
formatting.
• Go to ➜ the Home Tab ➜ Clipboard.
• Now, make a double click on “Format Painter” button.
As soon as you do this, your cursor will convert into a paintbrush.
Now, you can apply that formatting anywhere in your worksheet, in
another worksheet or, even in another workbook.

7722.. RReennaammee aa WWoorrkksshheeeett wwiitthh aa DDoouubbllee CClliicckk
I always found it quicker than using a shortcut key to change the name of
a worksheet.
All you have to do is just double click on the sheet tab and enter a new
name.
Let me tell you why this method is fast 💨 than using a shortcut.
Suppose if want to rename more than one worksheet using shortcut key.
Before you change the name of a worksheet, you need to activate it.
But if you use the mouse it will automatically activate that worksheet and
edit the name with only two clicks.

7733.. DDoouubbllee CClliicckk oonn FFiillll HHaannddllee ttoo DDrraagg VVaalluueess
I am sure shortcut addicts always use a shortcut key to drag formulas and
values in downward cells.
But using a fill handle is more impressive than using a shortcut key.
• Select the cell in which you have a formula or a value which you want
to drag.
• Make a double click on the small square box at the right bottom of the
cell selection border.
⚠️ This method only works if you have values in corresponding column
and it works only in the vertical direction.

7744.. CCoollllaappssee oorr EExxppaanndd tthhee RRiibbbboonn
If you want to work in a distraction-free mode, you can do this by
collapsing your Excel ribbon.
Just make a double click on the active tab in your ribbon and it will
collapse the ribbon.
And if you want to expand it back just double click on it again.

7755.. QQuuiicckkllyy EEddiitt aa SShhaappee
You often use shapes in our worksheets to present some messages and
you have to insert some text into those shapes.
Besides the typical method, you can use double click to edit a shape and
insert the text into it.
You can also use this method to edit and enter text in a checkbox or into
a chart title.

7766.. AAddjjuusstt CCoolluummnn WWiiddtthh wwiitthh DDoouubbllee CClliicckk
Whenever you have to adjust column width you can double click on the
right edge of the column header.
It auto sets the column width according to the column data.
The same method can be used to auto adjust row width.

7777.. GGoo ttoo tthhee LLaasstt CCeellll ooff tthhee DDaattaa
This trick can be useful if you are working with a large dataset.
By using a double click, you can go to the last cell in the range which has
data.
You have to click on the right edge of the active cell to go to the right side
& on the left edge if you want to go to the right side.

7788.. OOppeenn CChhaarrtt FFoorrmmaattttiinngg OOppttiioonnss
If you use Control + 1 to open formatting options to format a chart, then I
bet you’ll love this trick.
All you have to do is just make a double-click on the border of the graph
to open formatting option.

7799.. GGeett SSoouurrccee DDaattaa ffrroomm aa PPiivvoott TTaabbllee
Let’s say someone sent you a pivot table without the source data.
As you already know Excel stores data in pivot cache before creating a
pivot table.
You can extract data from a pivot table by double-clicking on data values.
As soon as you do this Excel will insert a new worksheet with the data
which has used in the pivot table.

8800.. SSUUPPEERR UUsseeffuull RRiigghhtt CClliicckk MMeennuu
There is a right-click drop-down menu in Excel which few users know
about.
To use this menu all you need to do is select a cell or a range of the cell...
...and then right-click and while holding it, drop the selection to
somewhere else.
You’ll get a menu with some useful options.

OOnnee TTiimmee SSeett--UUpp
There are few options in Excel which you can customize according to
your need to save your time and efforts on-wards and I have listed some
of those here.

8811.. CChhaannggee DDeeffaauulltt LLooccaattiioonn ttoo hhaavvee aa CClleeaann DDeesskkttoopp
Normally while working on Excel I create more than 15 Excel files every
day.
And, if I save each of these files to my desktop it looks nasty.
To solve this problem, I have changed my default folder for saving a
workbook and here’s you can do this.
• First, go to the file tab and open Excel options.
• In Excel options, go to “Save” category.
• Now, there is an input bar where you can change the default local file
location.
• From this input bar, change the location address and in the end, click
OK.
From now onward, when you open “Save As” dialog box Excel will show
you the location you have specified.

8822.. DDiissaabbllee SSttaarrtt SSccrreeeenn ttoo SSppeeeedd UUpp EExxcceell oonn OOppeenniinngg
I’m sure just like me you hate when you open Microsoft Excel (or any
other Office app) and you see the start pop-up screen.
It takes time depending on your system’s speed and add-ins you have
installed.
Here are the steps to disable the start-up screen in Microsoft Office.
• First, go to file tab and open Excel options.
• In Excel options, go to the “General” category.
• From option, drill down to “Start-Up” options and un-tick the “Show
the Start screen when this application starts”.
• From now onward, every time when you start Excel it will directly
open the workbook without showing the start-up screen.

8833.. SShhooww DDeevveellooppeerr TTaabb ttoo tthhee RRiibbbboonn
• Before you start writing VBA codes the first thing you need to do is
enable “Developer Tab”.
• When you first install any version of Microsoft Excel developer
wouldn’t be there so you need to enable it from settings.
• And here the steps for this:
• First of all, go to File tab and click on “Customize Ribbon” category.
• Now from the tab list, tick marks the developer tab and click OK.
Now when you come back to your Excel window you’ll have developer
tab on the ribbon.

8844.. EEnnaabbllee MMaaccrrooss ttoo RRuunn VVBBAA ccooddeess iinn yyoouurr WWoorrkkbbooookk
The thing is when you open a macro-enabled file you need to enable
macro options to run VBA codes.
Follow these simple steps:
• First of all, go to the File tab and click on the “Trust Center” category.
• From here click on “Trust Center Settings”.
• Now in “Trust Center Settings”, click on macro settings.
• After that, click on “Enable all macros” and tick mark “Trust access to
the VBA project object model”.
Now you can run VBA codes without any restriction.

8855.. CCrreeaattee aa AAUUTTOO CCOORRRREECCTT ffoorr tthhee WWoorrddss yyoouu MMiissssppeellll
If you do a lot of data entry in Excel then this option can be a game
changer for you.
With the auto correct option, you can tell Excel to change a text string
into another when you type it.
Let me tell you an example:
My name is “Puneet” but sometimes people write it like “Punit” but the
correct spelling is the first one.
So what I can do is, use auto correct and tell Excel to change “Punit” into
“Puneet”.
• First of all, go to the File tab and go to options and click on “Proofing”
category.
• After that, click on “AutoCorrect Option” and this will open the auto-
correct window.
• Here in this window, you have two input bars to specify the text to
replace and text to replace with.
• Enter both of the values and then click OK.

8866.. CCrreeaattee aa CCuussttoomm LLiisstt ttoo uussee iinn FFuuttuurree
Just think like, this you have a list of 10 products which you sell.
Whenever you need to insert those product name you can insert them
using a custom list.
Let me tell you how to do this:
• First of all, go to File tab and go to options and click on “Advanced”
category.
• Now, drill down and go to “General” section and click on “Edit Custom
List…”.
Now in this window, you can enter the list or you can also import it from a
range of cells.
In the end, click OK.
Now, to enter the custom list you have just created, enter the first entry
of the list in cell and then drill down that cell using fill handle.

8877.. AAppppllyyiinngg TTaabbllee ttoo DDaattaa wwhheenn CCrreeaattiinngg aa PPiivvoott TTaabbllee
If you use pivot tables a lot then it’s important to apply the table to the
raw data.
With a table, there is no need to update pivot table’s data source and it
drag-down formulas automatically when you add a new entry.
To apply table to the data just use Ctrl + T keyboard shortcut key and click
OK.

8888.. CChhaannggee GGrriidd--lliinnee CCoolloorr
If you are not happy with the default color of cell grid lines...
...then you can simply change it with few clicks...
...and follow these simple steps for this:
• First, go to File tab and click on “Advanced” category.
• Now, go to “Display options for this workbook” section and select the
color you want to apply.

8899.. PPiinn tthhee EExxcceell AApppp ttoo tthhee TTaasskkbbaarr
This is one of my favourite one-time set up to save time in the long run.
The thing is instead of going to start menu to open Microsoft Excel, the
best way is to pint it to the taskbar.
This way you can open it by clicking on the icon from the taskbar.

9900.. AAddddiinngg aa MMaaccrroo ttoo QQAATT
Alright, you have a macro code which you need frequently in your work.
The thing is you use it run that code from macros or by a shortcut key.
But the easiest way to run a macro code is to add it to the quick access
toolbar.
• First of all, go to File tab and click on “Quick Access Toolbar”
category.
• After that, from “Choose Command from”, select Macros.
• Now select the macro (you want to add to QAT) and click on add.
• From here click on “Modify” and select an icon for the macro button.
Now you have a button on QAT which you can use to run the macro code
you have just specified.

TTiimmee SSaavveerr TTiippss
Excel tips are all about saving time and making you more productive.
Below we have some time saver tips which you can use.

9911.. SSeelleecctt AAllll tthhee FFoorrmmuullaa CCeellllss iinn OONNEE GGOO
Let’s say you want to convert all the formulas into values and the cells
where you have formulas are non-adjacent.
So instead of selecting each cell one by one, you can select all the cells
where you have a formula.
Here are the steps:
• First of all, go to Home Tab ➜ Editing ➜ Find & Select ➜ Go To Special.
• In “Go To Special” dialog box, select formulas and click OK.
Once you click on this it will instantly select all the cells with formulas.

9922.. PPeerrffoorrmm QQuuiicckk CCaallccuullaattiioonnss uussiinngg PPAASSTTEE SSppeecciiaall
To do some one-time calculations you can use paste special option and
save yourself from writing formulas.
[know more]

9933.. HHiigghhlliigghhtt DDuupplliiccaattee VVaalluueess uussiinngg CCFF
Well, you can use a VBA code to highlight values but the easiest way is to
use conditional formatting.
Here are the steps you need to follow:
• First, select the range of where you want to highlight the duplicate
values.
• After that, go to Home Tab ➜ Styles ➜ Highlight Cells Rule ➜
Duplicate Values.
• Now from the dialog box, select the color to use and click OK.
• Once you click OK, all the values which are duplicate will get
highlighted.

9944.. CCrreeaattee CChhaarrttss aanndd PPiivvoott TTaabblleess wwiitthh QQuuiicckk AAnnaallyyssiiss
If you ever noticed that when you select a range of cell in Excel, a small
icon at the bottom of the selection appears.
This icon called “Quick Analysis”.
When you click on this icon you can see some of the options which are
there on the ribbon which you can directly use from here to save you
time.

9955.. OOppeenn EExxcceell uussiinngg RRUUNN CCoommmmaanndd
Yes, you can also open your Excel application using RUN command.
• For this, all you have to do is open RUN (Window Key + R) and then
type “excel” into it.
• In the end, hit enter.

9966.. OOppeenn SSppeecciiffiicc FFiillee wwhheenn yyoouu ssttaarrtt EExxcceell
I’m sure like me you also have few or maybe one those kinds of
workbooks which you open every day when you start working on Excel.
There is an option in Excel which you can use to open a specific file(s)
every time when you start Excel in your system.
Here are the steps.
• Go to File ➜ Options ➜ Advanced ➜ General.
• In general, enter the location (yes, you have to type) of the folder
where you have those file(s) in “At startup open all the files in”.
You can simply add or remove files from that folder, if you need.

9977.. OOppeenn EExxcceell wwhheenn yyoouu ““TTuurrnn OONN”” yyoouurr SSyysstteemm
Whenever I “Turn ON” my laptop the first thing I do is to open Excel and
I’m sure you do the same thing.
Well, I’ve got a better idea here You can add Excel to your system’s
startup folder.
• First of all, open “File Explorer” by using Windows key + E.
• Now, enter the below address into the address bar to open the folder
(change the username with your actual username).
C:UsersUser'sNameAppDataRoamingMicrosoftWindowsStart
MenuProgramsStartup
• After that, open the Start Screen, right-click the Excel App, and click
Open file location.
• From the location (Excel App Folder), copy the Excel App icon and
paste it into the “StartUp” folder.
Now every time when you open your system, Excel will automatically
start.

9988.. LLooookk uupp ffoorr aa VVaalluuee uussiinngg OOnnlliinnee RReessoouurrcceess
In Excel, there is an option called “Smart Lookup” and with this option,
you can lookup for text on the internet.
All you have to do is, select a cell or a text from a cell, and go to Review ➜
Insights ➜ Smart Lookup.
Once you click on it, it opens a side pane where you’ll have information
about that particular text which you have selected.
The idea behind this option is to get information by seeing definition,
images for the topic (text) from different online sources.

9999.. CClliipp SSccrreeeenn aanndd PPaassttee iitt iinnttoo tthhee WWoorrkksshheeeett
Sometimes you need to add screenshots into your spreadsheet.
And for this, Excel has an option which can capture screen instantly, and
you can paste it into the worksheet.
For this go to ➜ Insert ➜ Illustrations ➜ Screen Clipping.
Once you click on this you get a clipping tool which you can use to clip
the screen the way you want.

110000.. LLooccaattee aa KKeeyybbooaarrdd SShhoorrttccuutt bbyy UUssiinngg AALLTT KKeeyy
This tip is a game changer, yes that’s right.
If you are using Excel 2007 to Excel 2016, then you can locate a keyboard
shortcut by pressing ALT key.
Once you press it, it shows the keys for the options which are there on
the ribbon, just like below.
Let say, you want to press “Wrap Text” button, the key will be ALT + H +
W.

Excel tips and Tricks (XL - Power)

More Related Content

What's hot (16)

Similar to Excel tips and Tricks (XL - Power) (20)

Recently uploaded (20)

Excel tips and Tricks (XL - Power)