Exploration routing chapter 4
Download as PPT, PDF0 likes709 views
The document discusses distance vector routing protocols. It describes the characteristics of distance vector protocols, including that they use periodic updates where routers broadcast their full routing tables to neighbors. The document outlines the network discovery process, how routing tables are maintained through timers and triggered updates, and how issues like routing loops can occur if protocols are improperly configured. Mechanisms to prevent routing loops such as split horizon and poison reverse are also covered.
Exploration routing chapter 4
- 1. Distance Vector Routing Protocols Routing Protocols and Concepts – Chapter 4 ITE I Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 1
- 2. Objectives Identify the characteristics of distance vector routing protocols. Describe the network discovery process of distance vector routing protocols using Routing Information Protocol (RIP). Describe the processes to maintain accurate routing tables used by distance vector routing protocols. Identify the conditions leading to a routing loop and explain the implications for router performance. Recognize that distance vector routing protocols are in use today ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 2
- 3. Distance Vector Routing Protocols Examples of Distance Vector routing protocols: Routing Information Protocol (RIP) Interior Gateway Routing Protocol (IGRP) Enhanced Interior Gateway Routing Protocol (EIGRP) ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 3
- 4. Distance Vector Routing Protocols Distance Vector Technology The Meaning of Distance Vector: A router using distance vector routing protocols knows 2 things: Distance to final destination Vector or direction traffic should be directed ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 4
- 5. Distance Vector Routing Protocols Characteristics of Distance Vector routing protocols: Periodic updates Neighbors Broadcast updates Entire routing table is included with routing update ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 5
- 6. Distance Vector Routing Protocols Routing Protocol Algorithm: -Defined as a procedure for accomplishing a certain task Purpose of a routing algorithm ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 6
- 7. Distance Vector Routing Protocols Routing Protocol Characteristics Criteria used to compare routing protocols includes -Time to convergence -Scalability -Resource usage -Implementation & maintenance ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 7
- 8. Distance Vector Routing Protocols ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 8
- 9. Network Discovery Router initial start up -Initial network discovery Directly connected networks are initially placed in routing table ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 9
- 10. Network Discovery Initial Exchange of Routing Information If a routing protocol is configured then -Routers will exchange routing information Routing updates received from other routers -Router checks update for new information If there is new information: -Metric is updated -New information is stored in routing table ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 10
- 11. Network Discovery Exchange of Routing Information Router convergence is reached when -All routing tables in the network contain the same network information Routers continue to exchange routing information -If no new information is found then Convergence is reached ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 11
- 12. Network Discovery Convergence must be reached before a network is considered completely operable Speed of achieving convergence consists of 2 interdependent categories -Speed of broadcasting routing information -Speed of calculating routes ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 12
- 13. Routing Table Maintenance Periodic Updates : RIPv1 & RIPv2 These are time intervals in which a router sends out its entire routing table. ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 13
- 14. Routing Table Maintenance RIP uses 4 timers -Update timer -Invalid timer -Holddown timer -Flush timer ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 14
- 15. Routing Table Maintenance Bounded Updates: EIGRP EIRPG routing updates are -Partial updates -Triggered by topology changes -Bounded -Non periodic ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 15
- 16. Routing Table Maintenance Triggered Updates Conditions in which triggered updates are sent -Interface changes state -Route becomes unreachable -Route is placed in routing table ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 16
- 17. Routing Table Maintenance Random Jitter Synchronized updates A condition where multiple routers on multi access LAN segments transmit routing updates at the same time. Problems with synchronized updates -Bandwidth consumption -Packet collisions Solution to problems with synchronized updates - Used of random variable called RIP_JITTER ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 17
- 18. Routing Loops Definintions & Implications Routing loops are A condition in which a packet is continuously transmitted within a series of routers without ever reaching its destination. ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 18
- 19. Routing Loops Routing loops may be caused by: -Incorrectly configured static routes -Incorrectly configured route redistribution -Slow convergence -Incorrectly configured discard routes Routing loops can create the following issues -Excess use of bandwidth -CPU resources may be strained -Network convergence is degraded -Routing updates may be lost or not processed in a timely manner ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 19
- 20. Routing Loops Count to Infinity This is a routing loop whereby packets bounce infinitely around a network. ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 20
- 21. Routing Loops Setting a maximum Distance Vector routing protocols set a specified metric value to indicate infinity Once a router “counts to infinity” it marks the route as unreachable ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 21
- 22. Routing Loops Preventing loops with holddown timers Holddown timers allow a router to not accept any changes to a route for a specified period of time Point of using holddown timers -Allows routing updates to propagate through network with the most current information. ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 22
- 23. Routing Loops The Split Horizon Rule is used to prevent routing loops Split Horizon rule: A router should not advertise a network through the interface from which the update came. ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 23
- 24. Routing Loops Split horizon with poison reverse The rule states that once a router learns of an unreachable route through an interface, advertise it as unreachable back through the same interface ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 24
- 25. Routing Loops IP & TTL Purpose of the TTL field -The TTL field is found in an IP header and is used to prevent packets from endlessly traveling on a network How the TTL field works -TTL field contains a numeric value -The numeric value is decreased by one by every router on the route to the destination. -If numeric value reaches 0 then Packet is discarded ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 25
- 26. Routing Protocols Today Factors used to determine whether to use RIP or EIGRP include -Network size -Compatibility between models of routers -Administrative knowledge ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 26
- 27. Routing Protocols Today RIP Features of RIP: -Supports split horizon & split horizon with poison reverse -Capable of load balancing -Easy to configure -Works in a multi vendor router environment ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 27
- 28. Routing Protocols Today EIGRP Features of EIGRP: -Triggered updates -EIGRP hello protocol used to establish neighbor adjacencies -Supports VLSM & route summarization -Use of topology table to maintain all routes -Classless distance vector routing protocol -Cisco proprietary protocol ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 28
- 29. Summary Characteristics of Distance Vector routing protocols –Periodic updates –RIP routing updates include the entire routing table –Neighbors are defined as routers that share a link and are configured to use the same protocol The network discovery process for D.V. routing protocol –Directly connected routes are placed in routing table 1 st –If a routing protocol is configured then •Routers will exchange routing information –Convergence is reached when all network routers have the same network information ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 29
- 30. Summary D.V. routing protocols maintains routing tables by –RIP sending out periodic updates –RIP using 4 different timers to ensure information is accurate and convergence is achieved in a timely manner –EIGRP sending out triggered updates D.V. routing protocols may be prone to routing loops – routing loops are a condition in which packets continuously traverse a network –Mechanisms used to minimize routing loops include defining maximum hop count, holddown timers, split horizon, route poisoning and triggered updates ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 30
- 31. Summary Conditions that can lead to routing loops include –Incorrectly configured static routes –Incorrectly configured route redistribution –Slow convergence –Incorrectly configured discard routes How routing loops can impact network performance includes: –Excess use of bandwidth –CPU resources may be strained –Network convergence is degraded –Routing updates may be lost or not processed ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 31
- 32. Summary Routing Information Protocol (RIP) A distance vector protocol that has 2 versions RIPv1 – a classful routing protocol RIPv2 - a classless routing protocol Enhanced Interior Gateway Routing Protocol (EIGRP) –A distance vector routing protocols that has some features of link state routing protocols –A Cisco proprietary routing protocol ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 32
- 33. ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 33