Fanvil configuration guides_en
1 like813 views
This document provides instructions for configuring Fanvil IP phones to register with a MyPBX server using SIP and IAX2 protocols. It outlines the steps to register extensions via the phone's web interface by entering the MyPBX IP address, extension number, password and selecting codecs. It also describes how to configure a function key on the phone to activate the IAX2 line once registration is complete.
Fanvil configuration guides_en
- 1. Fanvil IP Phone Configuration Guide Yeastar Technology Co., Ltd.
- 2. Fanvil IP Phone Configuration Guides www.yeastar.com Page 2 Table of Contents CONFIGURING WITH MYPBX ....................................................................3 CONFIGURING TO USE IAX2 ON FANVIL ..................................................6
- 3. Fanvil IP Phone Configuration Guides www.yeastar.com Page 3 Configuring with MyPBX Configuring Fanvil IP phone with MyPBX This guide is applicable to Fanvil C62/C60/C58/C56. Please note: This guide has been tested for Fanvil C62 with firmware version 2.2.0.0. Be aware that different firmware versions may have different web interface formats and functionality. This guide will configure the IP phone with default configuration. If you are not sure about the configuration of your IP phone, please reset your phone. Register with MyPBX 1. Start up the phone and identify its IP Address by pressing Menu->Status on the phone, and you will find IP address of the phone. In this guide we will assume the IP Address of the phone is 192.168.5.235, and IP Address of MyPBX is 192.168.5.138 2. Start the browser on PC. In the address bar, enter the IP address of the phone: http://192.168.5.235 3. Enter the phone's login username (default "admin") and password (default "admin"). Figure 1 Page after login
- 4. Fanvil IP Phone Configuration Guides www.yeastar.com Page 4 4. Click on the "VOIP" tab on the left side. Register SIP extension 5. We now need to set SIP phone to register with MyPBX. Click “SIP” tab, ensure that the "SIP Line" field is set to "SIP 1", and in the "Basic Settings" section, configure as below: Figure 2 SIP Line Basic Settings 1) Status: Show if the phone has been registered with MyPBX or not 2) Server Address: Enter the IP address of MyPBX, in this guide is 192.168.5.138 3) Server Port: Enter SIP port of your MyPBX, in this guide is 5060 4) Authentication User: the extension number which you want to register, in this guide is 104 5) Authentication Password: enter the password of the extension you want to register 6) SIP User: enter the extension’s caller ID, in this guide is 104 7) Display Name: the name displayed on the phone, you can customize it or make it the same as extension’s number, in this guide is 104-standard 8) Enable Registration: Check it to register the extension with MyPBX 6. Next, we need to configure the audio codecs. Scroll down to the end of the "Basic" section, and expand the "Codecs" section. Ensure that the "Enable codecs" list box contains first "PCMU", then "PCMA", then “G.729AB”, and finally "G.722".
- 5. Fanvil IP Phone Configuration Guides www.yeastar.com Page 5 Figure 3 SIP Line Codecs Settings 7. Click the "Apply" button at the bottom of the page. The phone will now register with MyPBX. This can be verified via the “Status" page of MyPBX Management Console. Register IAX2 extension 8. Register IAX2 extension with MyPBX. Click “IAX2” tab, and configure as below: Figure 4 IAX2 Line Settings 1) Status: show if the phone has been registered with your MyPBX
- 6. Fanvil IP Phone Configuration Guides www.yeastar.com Page 6 2) Server Address: enter the IP address of your MyPBX, in this guide is 192.168.5.138. 3) Server Port: Enter IAX2 port of your MyPBX, in this guide is 4569 4) Account: the extension number which you want to register, in this guide is 106 5) Password: enter the password of the extension you want to register 6) Phone Number: enter the extension’s caller ID, in this guide is 106 7) Voice Mail Number: same as the feature code of entering VM box which is set in MyPBX. In this guide, enter *2 8) Enable Registration: check it 9) Enable G.729AB: check it or not according to your necessary. 10)Leave else as it is. 9. Click the "Apply" button at the bottom of the page. The phone will now register with MyPBX. This can be verified via the “Status" page of MyPBX Management Console. Configuring to use IAX2 on Fanvil 1. Click on the "Function Key" tab on the left side to enter the page. 2. You can configure a “Line Key” or “Function Key” to activate IAX2 line. The default function of the 4 “Line key” is to activate the 4 SIP lines. Now we configure “DSS Key4” to activate IAX2 line. Configuring it as below:
- 7. Fanvil IP Phone Configuration Guides www.yeastar.com Page 7 Figure 5 Configuring DSS Key4 to activate IAX2 Line 3. Click the "Apply" button at the bottom of the page. And the function of “DSS Key4” on the phone is to activate IAX2 line. <End>