Fault simulation
Download as PPT, PDF3 likes4,270 views
The document discusses different types of fault simulation techniques. Fault simulation involves simulating a circuit in the presence of faults to measure test pattern effectiveness and guide test generation. Parallel fault simulation takes advantage of bit-parallelism to simulate multiple faults simultaneously. Deductive fault simulation simulates only the fault-free circuit and deduces the behavior of faulty circuits. Concurrent fault simulation uses event-driven simulation and fault lists to implicitly simulate fault-free and faulty circuits.
Fault simulation
- 1. FAULT SIMULATION Juhi Khandelwal 13/pit/031
- 2. Simulation „ Simulation refers to modeling, of a design, its function and performance. † A software simulator is a computer program; an emulator is a hardware simulator † Simulator is used for design verification •„ Validate assumptions •„ Verify logic •„ Verify performance (timing)
- 3. Fault Simulation † Fault simulation In general simulating a circuit in the presence of faults is known as fault simulation † The main goals of fault simulation „ Measuring the effectiveness of the test patterns „ Guiding the test pattern generator program „ Generating fault dictionaries Fault simulator is an essential tool for test development † Outputs of fault simulation „ Fault coverage - fraction (or percentage) of modeled faults detected by test vectors „ Set of undetected faults
- 4. † Fault Simulation „Parallel Fault Simulation „Deductive Fault Simulation „Concurrent Fault Simulation
- 5. Parallel Fault Simulation † Assumptions „ The simulated circuit consists of only logic gates and all gates have the same delays „ Signals take only binary (0 and 1) values † Main idea „ Take advantage of the bit-parallelism of logical operations in a digital computer † For a 32-bit machine word, an integer consists of a 32-bit binary vector † A logic AND or OR operation involving two words performs simultaneous AND or OR operations on all respective pairs of bits
- 7. Deductive Fault Simulation † Simulating only the behavior of the fault free logic circuits † Need only one pass for each test pattern †All signal values in each faulty circuit are deduced from the fault-free circuit values and the circuit structure † For each test pattern, a deductive procedure is applied to all lines in a level order (for combinational logic) from inputs to outputs
- 8. Deductive Fault Simulation † Definition „ The fault list LA is defined as the set containing the name or index of every fault that produces an error on line A when the circuit is in its current logic state † A fault list is generated for each signal lines, and updated as necessary with every change in the logic state of the circuit † List events occur when a fault list changes
- 10. Concurrent Fault Simulation † Event-driven simulation of fault-free circuit and only those parts of the faulty circuit that differ in signal states from the fault-free circuit. † A list per gate containing copies of the gate from all faulty circuits in which this gate differs. List element contains fault ID, gate input and output values and internal states, if any. † All events of fault-free and all faulty circuits are implicitly simulated † Faster than other methods, but uses most memory .