Floating License Server User Guide

LICENSE4J
www.license4j.com
LICENSE4J FLOATING LICENSE SERVER
USER GUIDE
VERSION 4.6.0

Floating License Server User Guide
Table of Contents
Getting Started........................................................................................................................................ 2
Floating License Usage ......................................................................................................................... 2
Installation ................................................................................................................................................ 4
Windows Installation ......................................................................................................................... 4
Linux Installation with the Installer............................................................................................. 9
Linux and Mac OS Installation without the Installer............................................................. 9
Floating License Server Manager.................................................................................................... 11
License Server Connection............................................................................................................ 13
License Server Configuration ....................................................................................................... 15
Adding and Removing Licenses................................................................................................... 17
Access Restriction Settings........................................................................................................... 17
Displaying License Details ............................................................................................................. 19
Displaying License Server Hardware IDs................................................................................. 19
Basic License Usage Report.......................................................................................................... 20
Advanced License Usage Report................................................................................................. 21
Floating License Server Customization (Windows).................................................................. 29
Floating License Server Customization (Linux)......................................................................... 30
Error and Access Logging .................................................................................................................. 30
Floating License Server License...................................................................................................... 31
1

Getting Started
Floating licensing also known as concurrent licensing allows many users to share a
limited number of licenses. All users may have software installed but only limited
number of users can run software concurrently. Floating licensing requires a server
application to handle license requests and control license usage.
License4J Floating License Server and Runtime Library has provides all requirements
to implement floating licensing for software publishers.
Floating License Usage
License Manager GUI is has a wizard to generate licenses, and when floating license
text type is selected, required steps are displayed for defining floating license
features. There are two important steps for standard license features and floating
license features.
2

As in the screenshot above, license quantity, product edition and version, license
validity and maintenance periods can be defined. Hardware ID field is mandatory
and target floating license server hardware ID must be specified. License generation
time can be defined in the past or future for special requirements. If license
generation time is defined in the future, license cannot be installed and invalid
license error returns.
When license is expired after validity period, it is still leased to clients but expired
license status is obtained after validation.
The working internals for floating license is defined in the fifth step as in the
screenshot above.
License Check Period defines time interval in minutes which Runtime Library will
connect to floating license server to re-validate license to check for its expiration
time, lease status and its existence.
License Server Connection Check Period defines time interval in minutes to
acknowledge that client is still using the license and updates last connection time on
server. If time interval between current time and client last connection time is more
3

than defined value, then license lease is removed and license becomes free for
other clients. This feature will be useful in client network connection problems or at
unexpected power down. Default value for server connection check period is 1440
minutes if not defined in license generation. This setting also defines a timer task
period on Floating License Server to check for inactivate clients.
These license and server check methods ensures that both license server and client
is connected with a network and license usage is correctly controlled and monitored.
As explained in License Manager GUI User Guide, LicenseValidator.validate method
for a floating license has license valid/invalid handler and server connection error
handler arguments, these handlers are run when license validity changes or server
connection status goes down; so product may be blocked in runtime if required.
Basic default handlers are available in Runtime Library and also interface classes is
available and can be used to implement custom handlers to manage license.
Installation
Floating License Server has an installer for Windows, Linux/UNIX version is a
compressed package, it is enough to decompress and run a simple script on
Linux/UNIX. It runs as a service on operating system. Windows installation includes
required Java Runtime, so can be installed and used with a single installer.
Windows Installation
Standard windows setup file is provided for Floating License Server installation on
windows. Run setup file and continue with instructions.
4

On this window license agreement must be accepted to continue.
5

Select or accept the installation folder.
Setup includes two components; first one is Floating License Server Installation,
which installs license server service and management GUI tool. The second one is
management GUI tool installation which installs only the management GUI tool.
To install license server, select the Floating License Server Installation option as in
the screenshot below.
6

Floating License Server management GUI tool can be installed on computers other
than server to manage licenses. To install only management GUI on a management
client computer select Floating License Server Management GUI Installation options
as in the screenshot below. This option is generally installed for some users with
administrator roles in the organization.
7

A screen giving a summary of installation appears, then installation begins.
8

After installation completed, all required files are copied and a windows service is
installed. A program folder is created in start menu for license server administration
GUI tool.
Linux Installation with the Installer
Floating License Server has an installer for Linux OS, and it includes a Java
Runtime. Decompress floatinglicenseserver-linux-installer.tgz file and run the
executable file FloatingLiceseServer-Setup.run for installation. Script will ask for
installation path and complete, but it does not modify system startup files in any
way to install the floating license server service. To start floating license server
service on startup, put service.sh script in Linux startup files.
Linux and Mac OS Installation without the Installer
The download package without an installer can be used on both Linux and Mac OS.
This download package does not include a Java Runtime. Installation process has
two steps; first decompress floatinglicenseserver-linuxmacos.tgz file; second set
Java path and execute the service script.
9

Use standard gzip and tar commands to extract contents:
gzip -d floatinglicenseserver-linuxmacos.tgz
tar –xvf floatinglicenseserver-linuxmacos.tar
After extracting the file will directory named as floatinglicenseserver will be created.
Copy or move this directory to any place on Linux/UNIX server like /usr/local/
floatinglicenseserver.
NOTE: One important step is required for license server to run which is that
service.sh and gui.sh files should be edited to set JAVA like below:
# SET YOUR JAVA PATH HERE
#
JAVA=/usr/local/jdk1.6.0_11
Then run the service.sh with arguments start, stop or restart on Linux.
./service.sh stop: to start the license server.
./service.sh start: to stop the license server.
./service.sh restart: to re-start the license server.
For Mac OS operating system there is no service configuration available, it should be
run directory from Jar file.
Mac OS command: java –jar FloatingLicenseServer.jar start
10

To start the management GUI tool, run the gui.sh script.
Floating License Server Manager
With Floating License Server Administration GUI tool, following tasks are performed:
• Display installed licenses and active users obtained each license separately.
• Configure license server (only on local connections).
• Add and remove licenses.
• Display license details.
• Display floating license server hardware id.
• Get a basic license usage report.
After connecting to a license server main window as in the following screenshot is
displayed.
11

The window includes two tables. Upper table displays installed licenses; the bottom
table is enabled when a license selected on the license; and it displays active users
obtained the selected license.
If generated floating license allows running multiple instances of application on
same host by same user, only one license is consumed and all client instances are
displayed in client table; otherwise one license is consumed for each instance of
running application. This feature prevents users to exceed floating license count by
using same computer with the same user id with a remote connection.
12

After version 4.4.0, floating licenses can be superseded by other floating licenses to
replace or modify some license features. If license ID is displayed in red text color in
installed license list table, it means that license is superseded by another license.
Details are displayed in license view window.
Both tables are refreshed on each 3 seconds, so changes are displayed at most 3
seconds later on tables.
License Server Connection
The main window as in the screenshot below is displayed when Floating License
Server Manager GUI is run.
13

To connect to a floating license server Connect menu item should be used in
Connection menu.
14

While administration GUI running and connected to the server, if server goes down
or any network problem occurs administration GUI automatically disconnects and
following screenshot displayed. It takes at most 10 seconds to detect a connection
problem.
License Server Configuration
Floating License Server Manager GUI can be used to configure server if it is on the
same computer with license server (connected through 127.0.0.1 or localhost).
The configuration window as in the screenshot below will be displayed when Server
Configuration menu item is clicked.
15

In this configuration window, interface for license server to listen on, and port
number is defined. By default license server listens on all interfaces and port
number 16090. Administrator Hosts are defined in the text area with their IP
addresses. These hosts can use floating license server manager GUI and will have
permission to install and delete licenses. Floating license server service should be
restarted for changes to take effect.
When enabled server prepares license usage reports and saves on defined files; it
can save both text file and html file in defined intervals.
16

Adding and Removing Licenses
License file installation is performed with Install New License menu item in License
menu. Selected license file is sent to server and validated, if license is valid then
installed and a successful installation message is displayed.
Delete Selected License menu item is used to delete installed licenses. When a
license is deleted, stored license file on disk is also deleted.
Access Restriction Settings
Some client connections based on defined username, hostname and IP block can be
rejected or allowed to get a specific license. Each license has its own access
restriction settings. License menu and context menu has a new menu item named
Access Control Restrictions. When a license is selected on main GUI, menu item is
enabled; when it is run, a dialog window is displayed to manage settings as in the
following screenshot.
Client username, hostname and IP block is used to decide whether requesting client
will be rejected or allowed. And operator is used to combine 3 variables; if
username is not specified, it matches all users and “all-users” string is displayed on
17

the GUI. If hostname is not specified, it matches all hosts and “all-hosts” string is
displayed; IP block definition is also same.
On the above sample screenshot, username “user1” will be rejected on computer
with hostname “testPC1” temporarily until displayed time. On the second line, all
users on all computers will be rejected connecting from 192.168.1.1 network (C
class subnet).
Client access settings can be permanent or temporary. Temporary setting is
displayed as “temporary until 2014-07-18 08:50:41”; access setting will be
removed by server on the displayed date and time. Temporary setting is defined in
minutes (minimum is 1 minutes, maximum is 999999 minutes). Floating License
Server converts defined minutes to a final date/time by adding defined minutes to
current time; server clock and time zone is used in calculations.
Permanent access settings can scheduled for defined week days and time period.
Time period is between 00:00 and 23:59 inclusive; at least 1 day must be selected.
18

Displaying License Details
Installed license details can be displayed with Display License menu item, or with a
double click on license. A window with license details will come up as below.
Displaying License Server Hardware IDs
Display Server Hardware ID menu item in License menu is used to get hardware IDs
of floating license server. All available hardware ID types are displayed (hostname,
Ethernet address, disk volume number, and disk serial number), any of them or a
combination can be used to generate a license.
19

Basic License Usage Report
Save Current License Usage Report menu items in License menu save current
license usage to text file and html file. Floating license server also saves usage
report to a defined text or html file in selected periods if configured in server
configuration window as in the screenshot below.
20

Advanced License Usage Report
Version 4.4.1 and later stores all license usage time information in an embedded
database, and it is possible to generate excel files and graphs. License menu has a
new menu as Usage Statistics, and it has three menu items. With Save Raw Data to
CSV File menu item, raw usage data is exported to a csv file. Floating License
Server stores all license usage with lease time and remove time. Clear Statistics
menu item deletes raw data older than defined number of days. License Usage
Statistics menu item opens a window as in the following screenshot.
21

In this window, license usage time information with or without user information for
either daily or monthly time period is exported to an excel file. It exports data in a
tabular form to easily create a chart.
To get concurrent license usage count information “License concurrent usage
statistics only” should be selected. If daily time period is selected, concurrent
license usage information for each hour will be saved to excel file (24 lines if hours
is not selected). To get work hours concurrent usage data, hour values should be
selected. If monthly time period is selected, mathematical mean will be calculated
from hourly data for each day and a single value for each day will be saved.
22

Concurrent license usage count is queried for each license every minute and
temporarily saved; when clock minute value is 59 (end of hour) server calculates
mathematical mean from 60 minute value and store single mean value for the
current hour into database.
Example screenshot below includes license usage time data for 30 days with 3
users. To create a line chart in excel with this data, just select table and click on
insert recommended chart button. Y-Axis displays license usage calculated in terms
of minutes; X-Axis displays the date.
Similar reports and charts can be generated for only total license usage without
user information; also time period can be defined in months.
23

Following screenshot has concurrent license usage count information for 2 days.
Excel scatter chart can be used to visualize concurrent license usage for desired
time period. Column charts can be used to summarize daily concurrent usage.
24

Draw Chart button on this screen directly draws and displays charts. The
screenshots below are some sample charts.
25

This is sample chart displaying last 30 days of license usage times for a specific
license.
26

This is a sample chart with user information. It displays each users’ license usage
time separately.
This is sample chart displaying last 12 months license usage times.
Finally, the following chart displays mean and maximum concurrent license usage
count. Note: To get more accurate daily mean concurrent usage data, working
hours should be defined; so non-working hours will not be used in mean calculation.
27

Displayed charts supports zoom in and zoom out with left mouse selection. Also
there is a context menu displayed with right mouse click; on the context menu,
chart can be copied and saved as an image file.
28

Floating License Server Customization (Windows)
Floating License Server can be fully customized, and localized to support languages
other than English. Floating License Server Customization package is sent with e-
mail when requested, and it is free of charge. Package includes InnoSetup script to
create your own custom installer, a Launch4J configuration file to create an exe file
for administration GUI, and sample customization files. All strings in server and
administration GUI can be changed with simple properties files, about box image is
also defined in property file for administration GUI.
There are two options to place custom properties files and about box image. The
first option is to add custom properties files and about box image inside jar files
(FloatingLicenseServer.jar and FloatingLicenseServerAdmin.jar); so they cannot be
easily viewed by customers. The second option is to add files in the config directory.
Steps to customize are as follows.
29

1. Add LocalizationAndCustomFile keyword to guiconfig.ini and serverconfig.ini
files and define custom properties files. jar: is a keyword to indicate that files
are added inside jar file.
Option1 inside jar: LocalizationAndCustomFile=jar:mycustom.properties
Defined properties will be searched in
/com/license4j/floatinglicenseserver/gui/resources for administration GUI,
and in /com/license4j/floatinglicenseserver/server/resources for license
server.
Option 2 in config directory: LocalizationAndCustomFile=mycustom.properties
2. If you use option 1, use jar command with uf options to add your custom
properties files and about box image inside jar files and update.
3. If you use option 2, add your files in your config directory and update
InnoSetup script to include these new files.
4. (Optional) Update installService.bat and uninstallService.bat files if you want
to change installed service name (default: Floating License Server)
5. Create setup file by running InnoSetup script.
Floating License Server Customization (Linux)
Floating License Server Linux download package use makeself to make a self-
extracting installer. Linux customization package includes required information
about running makeself software. The jar file and/or properties files customization is
same with the Windows customization package.
Error and Access Logging
Floating License Server and Management GUI logs errors and access logs in system
program data folder on Windows.
(e.g. C:ProgramDataFloating License Serverlogs)
30

On Linux and Mac OS log file is saved in the current path which Floating License
Server and Management GUI is running.
Floating License Server generates two logs files names as server-error.txt and
server-access.txt. Server access logs like license lease, license release, license
install and delete can be found in access log file. If any error/exception occurs it is
logged in error log file and includes error codes to easily identify problem.
Administration GUI error log file name is gu-error.txt and includes exceptions
caught while running.
Floating License Server License
LICENSE4J Floating License Server is free to use and distribute with your product.
You may use and distribute floating license server setup files with your product for
installation by your customers. You may also customize and white-label Floating
License Server and distribute with or without your software product.
Details on licensing can be found in END-USER LICENSE AGREEMENT which is found
in EULA.txt file.
31

End of document.
32

Floating License Server User Guide

More Related Content

Similar to Floating License Server User Guide (20)

Recently uploaded (20)

Floating License Server User Guide