Fme iii group assignment

1
Page | 1
Course Titel
BGMEA UNIVERSITY OF FASHION & TECHNOLOGY
Assignment On:
Comprehensive Study on different types of knit fabric
faults, causes and remedies.
Department: Textile Engineering
Course name: Fabric Manufacturing Engineering –III
Course code: TEX4105
Submitted By:
1. Sajib Chandra Das- 132-006-0-155
2. Rimon Chowdhury- 132-012-0-155
3. Md. Rahmat Ullah -132-036-0-155
4 .Subrata sen- 132 -039-0-155
Submitted To:
Md. Abdur Rouf
SeniorLecturer
Department of Textile Engineering
BUFT
2017
BGMEA UniversityOf Fashion&Technology(BUFT)
FabricManufacturingEngineering-III(Assignment
Source:Google,Tex.Blog,Tex.learner)
1/14/2017

[2]
Comprehensive Study on different types of
knit fabric faults,causesand remedies:
Faults in the Knitted Fabrics:
A defect of the knitted fabric is an abnormality which spoils the
aesthetics i.e. the clean & uniform appearance of the fabric & effects
the performance parameters, like; dimensional stability etc.
There are various types of defects which occur in the Knitted fabrics of
all types caused by a variety of reasons. The same type of defects may
occur in the fabric due to a variety of different causes e.g. Drop
Stitches, Spirality etc.
Category of Defects:
# Yarn Related Defects:
Almost all the defects appearing in the horizontal direction in the
knitted fabric are yarn related. These defects are mainly;
1. Barriness
2. Thick & Thin lines
3. Dark or Light horizontal lines (due to the difference in dye pick up)
4. Imperfections
5. Contaminations
6. Snarling
7. Spirality

[3]
# Machine Settings Related Defects:
These defects appear randomly in the knitted fabrics due to the wrong
knitting machine settings &that of the machine parts. The defects are
mainly;
1. Drop Stitches
2. Yarn Streaks
3. Barriness
4. Fabric press off
5. Broken Ends
6. Spirality
# Knitting Elements Related Defects:
Almost all the defects appearing in the vertical direction in the knitted
fabrics are as a cause of bad Knitting Elements. These defects are
mainly;
1. Needle & Sinker Lines
2. Drop Stitches etc.
# Dyeing Related Defects:
The Dyeing related defects are as follows;
1. Dyeing patches
2. Softener Marks
3. Shade variation

[4]
4. Tonal variation
5. Color fading (Poor Color Fastness)
6. Dull shade
7. Crease or rope Marks
# Finishing Related Defects:
Defects caused mainly due to the wrong process parameters are;
1. High Shrinkage
2. Skewing
3. Spirality
4. Surface Hairiness & Pilling
5. Tonal variation
6. Snagging (Sharp points in the dyeing machine or trolley etc)
7. Fold Marks
8. Wet Squeezer Marks
9. GSM variation
10. Fabric Width variation
11. Curling of S.J. Fabrics
# causes and remedies:
Drop Stitches (Holes)

[5]
Definition:
Drop Stitches are randomly appearing small or big holes of the same or
different size which appear as defects in the Knitted fabrics.
Hole inFabric
Major Causes:
1. High Yarn Tension
2. Yarn Overfeed or Underfeed
3. High Fabric Take Down Tension
4. Defects like Slubs, Neps, Knots etc.
5. Incorrect gap between the Dial & Cylinder rings.
Remedies:
1. Ensure uniform yarn tension on all the feeders with a Tension Meter.
2. Rate of yarn feed should be strictly regulated as per the required
Stitch Length.

[6]
3. The fabric tube should be just like a fully inflated balloon, not too
tight or too slack.
4. The yarn being used should have no imperfections like; Slubs, Neps &
big knots etc
5. The gap between the Cylinder & the Dial should be correctly adjusted
as per the knitted loop size.
Streakiness
Definition:
Streaks in the Knitted fabrics appear as; irregularly spaced & sized, thin
horizontal lines.
Causes:
1. Faulty winding of the yarn packages.
2. Yarn running out of the belt on the Pulley
Remedies:
1. Winding of the yarn package should be proper.
2. The yarn should be running between the belt and around the pulley.
Barriness
Definition:

[7]
Barriness defect appears in the Knitted fabric in the form of horizontal
stripes of uniform or variable width.
Causes:
2. Count Variation
3. Mixing of the yarn lots
4. Package hardness variation
Remedies:
1. Ensure uniform Yarn Tension on all the feeders.
2. The average Count variation in the lot should not be more than + 0.3
3. Ensure that the yarn being used for Knitting is of the same Lot .
4. Ensure that the hardness of all the yarn packages is uniform using a
hardness tester.
Imperfections
Definition:
Imperfections appear on the fabric surface in the form of unevenly
placed or randomly appearing Knots, Slubs & Neps, Thick & Thin places
in the yarn.

[8]
Causes:
1. Big Knots, Slubs & Neps in the yarn, Thick & Thin yarn.
Remedies:
1.Specify the quality parameters of the yarns to be used for production
to the yarn supplier.
Snarls
Definition:
Snarls appear on the fabric surface in the form of big loops of yarn
getting twisted due to the high twist in the yarn.
Causes:
1. High twist in the yarn.
Remedies:
2. Twist in the yarn should be in required TPM.
Spirality
Definition:
Spirality appears in the form of a twisted garment after washing.The
seams on both the sides of the garment displace from their position &
appear on the front & back of the garment.

[9]
Causes:
1. High T.P.I. of the Hosiery Yarn
2. Uneven Fabric tension on the Knitting machine.
3. Unequal rate of Fabric feed on the Stenter, Calender & Compactor
machines.
Remedies:
1. Use the Hosiery yarns of the recommended TPM level for Knitting.
2. Ensure uniform rate of feed of the dyed fabric on both the edges
while feeding the fabric to the Calender, Compactor or Stenter
machines.
Contaminations
Definition:
Contaminations appear in the form of foreign matter such as; dyed
fibers, husk, dead fibers etc. in the staple spun yarn or embedded in the
knitted fabric structure.
Causes:
1. Presence of dead fibers & other foreign materials, such as; dyed
fibers, husk & synthetic fibers etc.

[10]
2. Dyed & other types of fibers flying from the adjacent Knitting
machines cling to the yarn being used for knitting & get embedded in
the Grey Fabric.
Remedies:
1. Use rich fiber mixing for the yarns to be used for Knitting in order to
have less dead fibers appearing in the fabric.
2. Rigid control measures in the Blow Room to prevent the mixing of
foreign matters in the Cotton mixing.
3. Segregate the Spinning & Knitting Machines, with Plastic Curtains or
Mosquito Nets, to prevent the fibers flying from the neighboring
machines, from getting embedded in the yarn / fabric.
Needle Lines
Definition:
Needle lines are prominent vertical lines along the length of the fabric
which are easily visible in the grey as well as finished fabric.
Causes:
1. Bent Latches, Needle Hooks & Needle stems
2. Wrong Needle selection (Wrong sequence of needles, put in the
Cylinder or Dial)
Remedies:

[11]
1. Inspect the grey fabric on the knitting machine for any Needle lines.
2. Check the Needle filling sequence in the Cylinder / Dial grooves
(tricks).
Horizontal lines
Horizontal line infabric
Causes:
1. Fault in bobbin
2. Irregular tension on cams.
Remedies:
1. Replace that bobbin.
2. Check cams positioning.
Broken Needles/ Laddering

[12]
Definition:
Defects caused by the broken needles show prominently as vertical
lines parallel to the Wales. There are no loops formed in the Wale
which has a broken needle.
LadderingEffect
Causes:
2. Bad Setting of the Yarn Feeders
3. Old & Worn out Needle set
4. Cylinder Grooves are too tight restricting needle movement
5. Breakage of hook or butt in needle.
Remedies:
1. Ensure uniform & the right Yarn tension on all the feeders.
2. Keep the recommended gap between the Yarn Feeders & the
Needles.

[13]
3. Periodically change the complete set of needles.
4. Remove fly or blockage from groove.
5. Replace defective needle.
Sinker Lines
Definitions:
Sinker lines are prominent or feeble vertical lines appearing parallel to
the Wales along the length of the knitted fabric tube.
Causes:
1. Bent or Worn out Sinkers
2. Sinkers being tight in the Sinker Ring grooves
Remedies:
1. Replace all the worn out or bent sinkers causing Sinker lines in the
fabric.
2. Sinker lines are very fine & feeble vertical lines appearing in the
fabric.
3. Remove the fibers clogging the Sinker tricks (Groove
Oil Lines
Definitions:

[14]
Oil lines are prominent vertical lines which appear along the length of
the knitted fabric tube. The lines become permanent if the needle oil
used is not washable & gets baked due to the heat during the finishing
of the fabric.
Causes:
1.Fibers & fluff accumulated in the needle tricks which remain soaked
with oil.
2.Excessive oiling of the needle beds.
Remedies:
1. Fibers accumulated in the needle tricks cause the oil to seep into the
Fabric.
2. Some lubricating oils are not washable & can not be removed during
Scouring.
3. Remove all the Needles & the Sinkers of the machine periodically.
4. Clean the grooves of the Cylinder & Dial of the machine thoroughly
with petrol.
5. Blow the grooves of the Cylinder Dial & Sinker ring with dry air after
cleaning.
Fabric Press Off
Definition:

[15]
Fabric press off appears as a big or small hole in the fabric caused due
to the interruption of the loop forming process as a result of the yarn
breakage or closed needle hooks.
Causes:
1. End breakage on feeders with all needles knitting.
2. Yarn feeder remaining in lifted up position due to which the yarn
doesn’t get fed in the hooks of the needles.
Remedies:
1. Needle detectors, should be set precisely to detect the closed
needles & prevent the fabric tube from completely pressing off.
2. Proper yarn tension should be maintained on all the feeders.
Broken Ends
Definition:
Broken ends appear as equidistant prominent horizontal lines along the
width of the fabric tube when a yarn breaks or is exhausted.
Causes:
2. Yarn exhausted on the Cones.
Remedies:

[16]
1. Ensure correct yarn tension on all the feeders.
2. Ensure that the Yarn detectors on all the feeders are working
properly.
3. Depute a skilled & alert machine operator on the knitting machine.
Snagging
Definition:
Snagging appears on the knitted fabric surface as a pulled up yarn float
showing up in the form of a large loop.
Causes:
1. Caused by the pulling or the plucking of yarn from the, fabric surface,
by sharp objects.
Remedies:
1. Inspect & rectify the fabric contact points on all the machines (Soft
Flow Dyeing, Tumble Dryer & Centrifuge etc), on which snagging is
taking place.
Bowing
Definition:
Bowing appears as rows of courses or yarn dyed stripes forming a bow
shape along the fabric width.

[17]
Causes:
1. Uneven distribution of tensions across the fabric width while dyeing
or finishing the fabric.
Remedies:
1. Bowing can be corrected by reprocessing the fabric by feeding it
from the opposite end.
2. A special machine (MAHLO) is also available for correcting the
bowing in the knitted fabrics.
Dyeing Patches
Definition:
Dyeing patches appear, as random irregular patches on the surface of
dyed fabrics.
Causes:
1. Inadequate Scouring of the grey fabric is one of the primary causes of
the dyeing patches.
2. Improper leveling agent is also one of the causes of dyeing patches.
3. Correct pH value not maintained.

[18]
4. Dyeing machine stoppage due to power failure or the fabric
entanglement in the dyeing machine are a major cause of the dyeing
patches.
Remedies:
1. Scour the grey fabric thoroughly to remove all the impurities from
the fabric before dyeing.
2. Use appropriate leveling agents to prevent patchy dyeing.
3. Maintain the correct pH value during the course of dyeing.
4. Use a power back up (Inverter) for the dyeing operation to be
completed uninterrupted.
Softener Marks
Definition:
1. Softener marks appear as distinct irregular patches in the dried fabric
after the application of softener.
Causes:
1. Softener not being uniformly dissolved in water
Remedies:
2. Scour the grey fabric thoroughly to remove all the impurities from
the fabric before dyeing.

[19]
3. Ensure that the softener is uniformly dissolved in the water &
doesn’t remain un-dissolved as lumps or suspension.
4. Use the right softener & the correct procedure for the application.
5. Maintain the correct pH value of the softener before application.
Stains
Definition:
Stains appear as spots or patches of grease oil or dyes of different
color, in a neat & clean finished fabric surface.
Causes:
1. Dyeing Machine not cleaned thoroughly after dyeing a lot.
2. Grease & Oil stains from the unguarded moving machine parts like;
Gears Shafts Driving Pulleys & Trolley wheels etc.
3. Fabric touching the floors & other soiled places during
transportation, in the trolleys.
4. Handling of the fabric with soiled hands & stepping onto the stored
fabric with dirty feet or shoes on.
Remedies:
1. Wash & clean the dyeing machine thoroughly after dyeing every dye
lot.

[20]
2. Follow the dyeing cycle of Light- Medium- Dark shades & then the
reverse the cycle while dyeing the fabric.
3. All the lubricated moving machine parts should be protected with
safety guards.
5. Handle the fabric carefully with clean hands & do not let anyone step
onto the stored fabric.
Color Fading (Poor Color Fastness)
Definition:
The color of the garment or the fabric appears lighter & pale in
comparison to the original color of the product after a few uses.
Causes:
1. Dyeing recipe i.e. the poor fixing of the dyes is a major cause of color
fading.
2. Using the wrong combination of colors in a secondary or tertiary
shade.
4. Prolonged exposure to strong light will also cause the colors to fade.
5. High level of acidity or alkalinity in the perspiration of individuals also
causes color fading.
Remedies:
1. Use the correct dyeing recipe i.e. the appropriate leveling, fixing
agents & the correct combination of dyes.

[21]
2. Follow the wash care instructions rigidly.
3. Use mild detergents & soft water for washing the garments.
5. Turn the wet garments inside out while drying.
6. Dry in shade & not in direct sunlight.
7. Protect the garments again.
Shade Variation
(Roll to roll & within the same roll)
Definition:
Sometimes there appears to be a difference in the depth of shade
between the roll to roll & from place to place in the same roll. The
defect will show up clearly in the garments manufactured from such
fabric.
Causes:
1. Shade variation can be as a result of mixing of the, fabrics of two
different lots.
2. Shade variation is also caused, by the variation in the process
parameters i.e. Time, Temperature & Speed etc. from one fabric roll, to
the other.
3. Shade variation can appear to be, in fabrics with GSM variation,
caused due to the uneven stretching, unequal fabric overfeed % etc.
Remedies:

[22]
1. Ensure that the grey fabric used for one shade is knitted from the
same lot of the yarn.
2. Ensure that the same process parameters (Width, Overfeed,
Temperature & Machine Speed etc.) are used for each roll of a dye lot.
Tonal Variation
Definition:
Roll to roll or within the same roll difference in the color perception i.e.
Greenish, Bluish, Reddish or Yellowish etc. is attributed as tonal
variation in the shade.
Causes:
1. Wrong Dyeing recipe
2. Wrong leveling agent selection or wrong dyes combinations.
3. Improper fabric Scouring.
4. Impurities like Oil & Wax etc. not being completely removed in
Scouring
5. Level dyeing not being done due to the inappropriate leveling agents.
Remedies:
1. Use appropriate leveling agents to ensure uniform & level dyeing.
2. Scour the grey fabric thoroughly to ensure the removal of all the
impurities.

[23]
3. Ensure that the whole lot of the dyed fabric is processed under
uniform process parameters.
Crease Marks
Definition:
Crease marks appear in the knitted fabric, as dark haphazard broken or
continuous lines.
Causes:
1. Damp fabric moving at high speed in twisted form, in the Hydro
extractor (Centrifuge)
Remedies:
1. Use anti Crease, during the Scouring & the Dyeing process .
2. The use of anti Crease, swells the Cellulose & prevents the formation
of Crease mark.
3. Spread the fabric in loose & open form & not in the rope form, in the
Hydro Extractor.
High Shrinkage
Definition:
The original intended measurements of the Garment go, haywire,
during storage or after the very first wash.

[24]
Causes:
1. High Stresses & strains exerted on the fabric, during Knitting, Dyeing
& Processing & the fabric not being allowed to relax properly,
thereafter.
2. High shrinkage is primarily due to the fabric being subject to high
tension, during the Knitting, Dyeing & the Finishing processes
Remedies:
1. Keep the Grey Fabric in loose plated form, immediately after the roll
is cut.
2. Store the finished fabric also in the plated form & not in the roll
form.
3. Allow the fabric to relax properly, before it is cut.
GSM Variation
Definition:
The fabric will appear to have a visible variation in the density, from roll
to roll or within the same roll of, the same dye lot.
Causes:

[25]
Roll to roll variation in the, process parameters, of the fabric, like;
Overfeed & Width wise stretching of the dyed fabric, on the Stenter,
Calender & Compactor machines.
Roll to roll variation in the fabric stitch length.
Remedies:
Make sure that all the fabric rolls in a lot, are processed under the same
process parameters.
The Knitting Machine settings, like; the Quality Pulley diameter etc.
should never be disturbed.
Fabric Width Variation
Definition:
Different rolls of the same fabric lot, having difference in the finished
width of the fabric.
Causes:
1. Grey fabric of the same lot, knitted on different makes of Knitting
Machines, having varying number of Needles in the Cylinder.
2. Roll to roll difference, in the Dyed Fabric stretched width, while
feeding the fabric on the Stenter, Calander & Compactor.
Remedies:

[26]
1. The whole lot of the grey fabric should be knitted on the same make
of knitting machines.
2. This difference, in the number of needles, causes a difference of upto
2”-3” in the finished width of the fabric
3. The stretched width of the grey fabric should remain constant,
during finishing on the stenter.
Measurement Problems
Definition:
The measurements of the garments totally change after, a few hours of
relaxation & after the first wash. The arm lengths or the front & back
lengths of the garments may vary, due to the mix up of the parts.
Causes:
1. Shrinkage caused due to the inadequate relaxation of the knitted
fabrics, before cutting.
2. Mixing of the garment parts cut from, different layers or different
rolls of the knitted fabric.
Remedies:
1. Use a trolley, for laying the fabric on the table, to facilitate a tension
free, laying.
2. Let the fabric relax for a few hours, before cutting, especially the
Lycra fabrics.

[27]
3. Ensure the numbering of the different layers of the fabric, to prevent
the mix up of the components.
----------------------------THE END----------------------------

Fme iii group assignment

More Related Content

What's hot (20)

Viewers also liked (6)

Similar to Fme iii group assignment (20)

Recently uploaded (20)

Fme iii group assignment