Generic_Sample_INFOSECPolicy_and_Procedures

1709 Engle Avenue. Chesapeake, Va. 23320 | To be Label: CONFIDENTIAL | SAMPLEWEBSITE.COM
InformationSecurity Policiesand Procedures
&
Generic Sample Company, LLC.
Written: December 3, 2015
Revised: May 16, 2016
Written By:
Samuel A. Loomis

Table of Contents
Introduction Security: QuickReference Guide
I. Introduction
Brief Explanation of Payment Card Industry (PCI) Compliance
II. Scope of Policies and Procedures
1 - Firewall and Router Security Administration Policy
1.1 Policy Applicability
1.1.1 Information Security Definitions
1.1.2 Information Security Designations and Responsibilities
1.1.3 InformationTechnology Department Responsibilities
1.2 – Allowed Services and Connection Paths
2 - System Configuration Policy
2.2 System Configuration Standards and Deployment
2.2.1 System Purpose
2.2.2 Limit System Functionality to Only What’s Necessary
2.2.3 –System Security Configuration Process
2.2.4- General Firewall Configuration Changes
2.5 Compliance
3 - Data Retention, Encryption and Key Management Policy
3.1 Data Retention Policy
3.2 Disaster Recovery and Data Backup Procedure
3.3 EncryptionMethod
3.4 Encrypting Stored Cardholder Data
3.5 EncryptionKey Management
4 – Secure Data Transmission
4.1 Transmission Over Un-Trusted Networks
4.2 End User Messaging Technologies
5 - Anti-Virus Policy
5.1 Deploy Properly Configured Anti-Virus Software
5.2 Incident Response Plan
5.2.1A- Data Breach
5.2.1B Internal Breaches
6 – Develop and Maintain Secure Systems and Applications
6.1 Install the latest vendor-supplied security patches
6.2 Software Development Lifecycle
6.3 Change Management Policy
6.4 Develop and Test Web Applications Based on Secure Coding Guidelines
7 – Access Control
7.1 Data Access
7.2 System Access
8 – User Identification and Authentication

8.1 Assign unique user IDs and require user authentication
8.2 Remote access authentication requirements
8.3 Password policy
8.4 Password Control Standards
9 – Physical Security
9.1 Monitor physicalaccess to sensitive areas
9.2 –Handling visitors and sign in Log
9.3 – Store, inventory and secure media containing sensitive data securely
9.4- Device Management Responsibilities
9.5- Data disposal policy
9.6- Data Backup Plan
10 – Logging and Auditing
10.2 EventsLogged
10.3 EventLog Structure
10.4 NetworkTime Protocol(NTP)
10.5 Log Security
11 – Regularly Test Security Systems and Processes
11.1 Scan forrogue wireless devices
11.2 Vulnerability Scans
11.3 Vulnerability Penetration Testing
11.4 Use Intrusion Detection Systems (IDS’s) and/or Intrusion Prevention Systems (IPS’s)
12 – Maintain an Information Security Policy
12.1 Establish, publish, maintain and disseminate an information security policy
12.2 Special technology use policy
12.3 – 12.4 Information security roles and responsibilities
12.5 Security awareness program
12.6 Employeebackground checks
12.7 Third-party information sharing – due care and due diligence
12.8 Incident response plan
Appendix – A
Information Owner Delegation Form 1010:
Generic Sample Company Change Request Form 1411:
Encryption Key request Form:
Reference-
Generic Sample Company Incident Response Plan:

Information Security: Quick Reference Guide
Number Value Description
1 Authorized Information
Security Representative
(AISR)
Person designated as AISR
(Samuel A. Loomis)
2 Information Security
Subcommittee (ISS)
President- First Name Last Name
Operations Director: First Name Last Name
IT Director: First Name Last Name
Compliance Director: First Name Last Name
HR Director: First Name Last Name
3 Contractor/Visitor
Access
For contractors entering the building, specify how they are
logged in and out.
4 Electronic
Communication, E-mail,
Internet Usage
Specifies allowable and prohibited uses of electronic
communications, email and internet.
5 User Lockout After 3 unsuccessfulattempts to login to a work station, the
user gets locked out.
6 Password Length Password has to have a minimum of 6 characters
7 Password Change Employee’s must change password every 60 days
8 Password Reuse Password Reuse is unauthorized
9 Antivirus Software Symantec cloud
10 Antivirus company Symantec systems
11 Antivirus Updates Automatic updates
12 Security System Based on Building Code and Security Guidelines
13 Business Hours Business Hours are 8:00 to 5:00
14 Secure Doors Secure doors by ______ locking mechanism
15 Security Cameras Dependent upon Business Entity
16 Password Change Mandatory ever 60-90 Days
17 Provided Equipment TBD
18 Screen Lock When a user leaves their work station, the work station will
lock after 5 minutes.

I. Introduction
The following document outlines Generic Sample Company, LLC’s information security policies
and procedures. Generic Sample Company, LLC takes the security of critical data and business-
related assets very seriously. Therefore, management requires that all employees understand and
comply with these policies.
It is Generic Sample Company LLC’s intended purpose to protect client, employee, financial,
protected third party and other corporate information from unauthorized disclosure, modification
or destruction throughout the information’s lifecycle.
To accomplish this, Generic Sample Company, LLC has developed this set of IT Security Policies
and Procedures in conjunction with a rigorous PCI DSS Compliance Assessment performed by a
third party Qualified Security Assessor. These policies offer direction to specific departments and
staff members, and it is each individual’s responsibility to uphold those policies that directly relate
to their position Generic Sample Company, LLC.
Violations of this policy or related standards may lead to disciplinary action, up to and including
termination.
Brief Explanation of Payment Card Industry (PCI) Compliance
In September 2006, the five largest payment companies (American Express, Discover, JCB, and
MasterCard, and VISA) created the PCI Security Standards Council. Their mutual goal was to
create a single process that would enable companies to secure credit card data across all brands.
Together, they created the Payment Card Industry Data Security Standard (PCI DSS) Program.
This program enables merchants and service providers to safely store and process credit card
information, whether they are using manual or computerized credit card processing solutions. E-
commerce websites and POS devices that process information over the Internet are subject to the
most demanding PCI assessments due to the heightened risk of online data interception.

II. Scope of Policies and Procedures
These IT security policies and procedures apply to all users of the computer systems and networks
of Generic Sample Company, LLC, including but not limited to all employees and associates of
Generic Sample Company, LLC and its wholly-owned subsidiaries. They also apply to the
activities of all Generic Sample Company, LLC personnel using or affecting Generic Sample
Company, LLC's computer systems and networks. In addition, these policies and procedures
apply to the activities of all third-party consultants, contractors, vendors and temporary employees
using Generic Sample Company, LLC's computer systems and networks.
Any system component that is connected to the card-processing or data storage environment is in
scope for PCI compliance. System components include servers, applications, employee PC’s, and
other network components.
Examples of everyday systems that are in scope for PCI compliance include:
 Web Servers and app servers that process credit card data.
 Databases and PC’s used to store credit card data.
 Firewalls or network devices used to transport cardholder traffic.
 Printers, fax machines, and other devices that may temporarily hold data.
 Support systems, such as syslog server or Active Directory, primarily used by system
admins.
The following policies and procedures are intentionally broad in scope. The standards are specific
and are regularly updated to keep pace with changes in business, technology and the business
environment. Standards include details such as business process flows, roles and responsibilities,
technical specifics and contract requirements.

1 - Firewall and Router Security Administration Policy
All Generic Sample Company, LLC owned and operated routers and firewalls are in-scope for this
policy. Exemptions may only be authorized with written approval from Generic Sample Company,
LLC management or approved Security Officer.
Information Security Definitions
1 Availability: Data or information is accessible and usable upon demand by an
authorized person.
2 Confidentiality: Data or information is not made available or disclosed to
unauthorized persons or processes.
3 Integrity: Data or information has not been altered or destroyed in an
unauthorized manner.
4 Involved Persons: Every worker at Generic Sample Company, LLC -- no matter
what their status. This includes employees, contractors, consultants, temporaries,
volunteers, interns, etc.
5 Involved Systems: All computer equipment and network systems that are operated
within the Generic Sample Company, LLC environment. This includes all
platforms (operating systems), all computer sizes (personal digital assistants,
desktops, mainframes, etc.), and all applications and data (whether developed in-
house or licensed from third parties) contained on those systems.
6 Personally identifiable information (PII): Information that can be used on its
own or with other information to identify, contact, or locate a single person, or to
identify an individual in context.
7 Protected Financial Information (PFI): PFI is financial information, including
demographic information, created or received by the Generic Sample Company,
LLC entities which relates to the past, present, or future personal or financial
condition of an individual; the provision of debt and wealth associated to an
individual; or the past, present, or future payment for the provision of financial
responsibility to an individual and that identifies or can be used to identify the
individual.
8 Risk: The probability of a loss of confidentiality, integrity, or availability of
information resources.
1.1.2 INFORMATION SECURITY DESIGNATIONS AND RESPONSIBILITIES
A. Authorized Information Security Representative: An Authorized
Information Security Representative (AISR) for each entity is responsible
for working with user management, owners, custodians, and users to
develop and implement prudent security policies, procedures, and controls,
subject to the approval of Generic Sample Company, LLC. Specific
responsibilities include:

1. Ensuring security policies, procedures, and standards are in place
and adhered to by entity.
2. Providing basic security support for all systems and users.
3. Advising owners in the identification and classification of computer
resources.
4. Advising systems development and application owners in the
implementation of security controls for information on systems,
from the point of system design, through testing and production
implementation.
5. Educating custodian and user management with comprehensive
information about security controls affecting system users and
application systems.
6. Providing on-going employee security education.
7. Performing security audits.
8. Reporting regularly to the Generic Sample Company, LLC
Information Security Subcommittee (ISS) on entity’s status with
regard to information security.
B. Information Owner: The owner of a collection of information is usually
the manager responsible for the creation of that information or the primary
user of that information. This role often corresponds with the management
of an organizational unit. In this context, ownership does not signify
proprietary interest, and ownership may be shared. The owner may
delegate ownership responsibilities to another individual by completing the
Generic Sample Company, LLC Information Delegation Form (Form-
1010). The owner of information has the responsibility for:
1. Knowing the information for which she/he is responsible.
2. Determining a data retention period for the information, relying on
advice from the Compliance and/or IT Department.
3. Ensuring appropriate procedures are in effect to protect the
integrity, confidentiality, and availability of the information used or
created within the unit.
4. Authorizing access and assigning custodianship.
5. Specifying controls and communicating the control requirements to
the custodian and users of the information.
6. Reporting promptly to the AISR the loss or misuse of Generic
Sample Company, LLC’s information.
7. Initiating corrective actions when problems are identified.
8. Promoting employee education and awareness by utilizing
programs approved by an AISR, where appropriate.

9. Following existing approval processes within the respective
organizational unit for the selection, budgeting, purchase, and
implementation of any computer system/software to manage
information.
C. Custodian: The custodian of information is generally responsible for the
processing and storage of the information. The custodian is responsible for
the administration of controls as specified by the owner. Responsibilities
may include:
1. Providing and/or recommending physical safeguards.
2. Providing and/or recommending procedural safeguards.
3. Administering access to information.
4. Releasing information as authorized by the AISR for use and
disclosure using procedures that protect the privacy of the
information.
5. Evaluating the cost effectiveness of controls.
6. Maintaining information security policies, procedures and standards
as appropriate and in consultation with an AISR.
7. Promoting employee education and awareness by utilizing
programs approved by an AISR, where appropriate.
8. Reporting promptly to an AISR the loss or misuse of Generic
Sample Company, LLC information.
9. Identifying and responding to security incidents and initiating
appropriate actions when problems are identified.
D. User Management: Generic Sample Company management who supervise
users as defined below. User management is responsible for overseeing
their employees' use of information, including:
1. Reviewing and approving all requests for their employee access
authorizations.
2. Initiating security change requests to keep employees' security
record current with their positions and job functions.
3. Promptly informing appropriate parties of employee terminations
and transfers, in accordance with local entity termination
procedures.
4. Revoking physical access to terminated employees, i.e.,
confiscating keys, changing combination locks, etc.
5. Providing employees with the opportunity for training needed to
properly use the computer systems.
6. Reporting promptly to an AISR the loss or misuse of Generic
Sample Company, LLC information.

7. Initiating corrective actions when problems are identified.
8. Following existing approval processes within their respective
organization for the selection, budgeting, purchase, and
implementation of any computer system/software to manage
information.
E. User: The user is any person who has been authorized to read, enter, or
update information. A user of information is expected to:
1. Access information only in support of their authorized job
responsibilities.
2. Comply with Information Security Policies and Standards and with
all controls established by the owner and custodian.
3. Refer all disclosures of PII/PFI (1) outside of Generic Sample
Company, LLC and (2) within Generic Sample Company, other
than for payment options, to the applicable entity’s (Third Party
Vender) Information Management Department. In certain
circumstances, the Information Security policies may specifically
delegate the disclosure process to other departments.
4. Keep personal authentication devices (e.g. passwords, Secure
Cards, PINs, etc.) confidential.
5. Report promptly to an AISR the loss or misuse of Generic Sample
Company, LLC information.
6. Initiate corrective actions when problems are identified.

1.1.3- Information Technology Department Roles and Responsibilities:
 Ensures that any changes to the firewall hardware,software,or security rules are
authorized by the Information Technology Department and follow appropriate change
control policies.
 Ensures that all router configuration files are synchronized and secure.
 Uses Permitted Network Services and Protocols to document any firewall security rule
changes.
 Mitigates security events by coordinating a sufficient response plan with the Information
Technology Department.
 Reviews and updates network diagrams after any changes are made. The diagrams must
accurately describe firewalls, access control systems,anti-virus software,IDS/IPS,and
any other connection to confidential or sensitive information.
 Reports any discovered vulnerabilities or security events to the Generic Sample
Company, LLC Oversight Committee.
 On a daily basis, monitors all logs that capture and report security events.
 Provides the Networks Operation Center read-only access to logs related to security events
and the performance of critical systems.
 Keeps track/monitor system alerts related to critical systems. These alerts might include
system reboots, firewall domain failing etc.
 In the event of a security system failure, alerts the appropriate department.
 Assures Generic Sample Company, LLC management that the security rules applying to
firewalls are sufficient to protect assets from unauthorized access.
 Assures Generic Sample Company, LLC management that the security rules applying to
firewalls are sufficient to prevent internal security threats from exiting the network.
 Mitigates security risks by developing an appropriate response plan with the System
Administrator.
 At least once a month, the Information Technology Department must perform a thorough
review of each firewall rule set. The results must be recorded,and must include the
removal of any unnecessary access paths. As a result,any proposed changes must go
through the change control process before they are implemented.
 Identifies internal or external threats by actively monitoring firewall security events.
 Performs a thorough review of any proposed firewall and router security rule change.
Ensure they meet policy compliance before sending the proposal through the change
management process.
 Ensures the proper documentation of all services allowed through the firewall.
 For risky protocols, performs or approves a risk assessment and ensures the protocol has a
specific business need.
1.2 – Allowed Services and Connection Paths
The firewall must block every path and service that is not specifically approved by this policy.
Generic Sample Company, LLC must maintain a “Permitted Network Services and Protocols” list,
which outlines currently approved paths and services.
All inbound Internet traffic must use a network segmented by a firewall. This segmented zone is
known as the DMZ or Demilitarized Zone. This inbound traffic must be limited to only those ports
deemed necessary for Generic Sample Company, LLC business. With the exception of the DMZ,
perimeter routers should never be configured to include a route to internal address space.

All firewalls’ and routers’ configuration files must be secured to prevent unauthorized tampering.
In addition, the start-up configuration files must be synchronized with the secure settings of the
running configuration files in order to prevent weaker rules from running in the event that one of
these devices re-starts.
Network Address Translation (NAT) or Port Address Translation (PAT) must be used to hide
internal IP addresses.
Internal production systems with outbound traffic must also use the DMZ network. This type of
traffic should also be limited to only required protocols and services.

2 - System Configuration Policy
This policy applies to all Generic Sample Company, LLC-operated servers and network devices,
whether supervised by employees or third parties. All devices must have vendor-supplied defaults
changed prior to deployment. Exemptions may only be authorized with written approval from the
Generic Sample Company, LLC Oversight Committee.
2.2.1 System Purpose
Generic Sample Company, LLC computing systems should adhere to a ‘one primary function per
server’ rule. For example: web servers,database servers and DNS should be operated from distinct
and separate servers. Unless otherwise required by vendor documentation, no multi-purpose
system may store, transmit, or process sensitive or confidential information.
2.2.2 Limit System Functionality to only what is Necessary
Only secure services,protocols and daemons that are necessary for a system to function are
permitted. Functionality of system components should at all times match an up-to-date ‘System
Configuration List on Sharepoint that Generic Sample Company, LLC maintains for all system
component types
2.2.3 –System Security Configuration Process
The following process is a guideline to be followed during new system deployment.
1. Install Operating System.
2. Update operating system software.
3. Configure OS parameters to properly secure the system.
4. Install software and applications.
a. If this is replacing an existing system, install system specific software according to
the System Configuration Record.
b. Install any software necessary for the systems objective.
c. Configure NTP (Network Time Protocol).
5. Update all software
6. Configure application parameters according to build documentation.
7. Complete and archive a System Configuration Record for each specific system.
All Generic Sample Company, LLC systems must install the following list of standard software.
Any deviation or exemption from these configuration standards must include a reasonable business
justification and an acknowledging risk assessment. The deviation must then be approved by the
Generic Sample Company, LLC Oversight Committee and logged in the System
Configuration Record for the specific system.
 For Generic Sample Company, LLC servers:
o Anti-Virus Software
o IDS Software
 For Generic Sample Company, LLC desktops and laptops:
o Anti-Virus Software
o IDS Software
o Malware Software
o VPN Client software

2.2.4 General Firewall Configuration Changes
Firewalls are categorized as production systems as they support Generic Sample Company, LLC
information systems.
Any and all changes to the firewall must be approved in advance by the Information Technology
Director. The changes must be thoroughly tested (following production standards) as outlined in
the Change Control Policy. Examples of changes include:
 Upgrades or patches to the firewall system.
 Modifications to any firewall software or system.
 Additions, deletions, or modifications to the firewall rules.
2.5 Compliance
A. The Information Security Policy applies to all users of Generic Sample Company, LLC
information including: employees, staff, partners,investors, and outside affiliates. Failure to
comply with Information Security Policies and Standards by employees, staff, volunteers, and
outside affiliates may result in disciplinary action up to and including dismissal in accordance with
applicable Generic Sample Company, LLC procedures,or, in the case of outside affiliates,
termination of the affiliation. Failure to comply with Information Security Policies and Standards
may constitute grounds for corrective action in accordance with Generic Sample Company, LLC
procedures. Further, penalties associated with state and federallaw may apply.
B. Possible disciplinary/corrective action may be instituted for, but is not limited to, the following:
1. Unauthorized disclosure of PII/PFI or Confidential Information as specified in
Confidentiality Statement.
2. Unauthorized disclosure of a sign-on code (user id) or password.
3. Attempting to obtain a sign-on code or password that belongs to another person.
4. Using or attempting to use another person's sign-on code or password.
5. Unauthorized use of an authorized password to invade patient privacy by examining
records or information for which there has been no request for review.
6. Installing or using unlicensed software on Generic Sample Company, LLC computers.
7. The intentional unauthorized destruction of Generic Sample Company, LLC
information.
8. Attempting to get access to sign-on codes for purposes other than official business,
including completing fraudulent documentation to gain access.
The Generic Sample Company, LLC Information Security Policy requires the use of strictly
controlled passwords for accessing Personally Identifiable Information (PII), Protected Financial
Information (PFI),Confidential Information (CI) and Internal Information (II). (See Generic
Sample Company, LLC Information Security Policy for definition of these protected classes of
information.)

3 - Data Retention, Encryption and Key Management Policy
3.1 – Data Retention Policy
Any and all data assets stored on Generic Sample Company, LLC systems that are classified as
sensitive or confidential must adhere to this policy. For credit card data,only the primary account
number (PAN),cardholder name, expiration code and service code may be stored. In addition, an
encrypted PAN is deemed to be PAN data that must adhere to this policy. The Information
Technology Department must provide written approval for any exemptions to this policy.
The data creator or authorized manager must establish a specific retention timeframe for any
sensitive or confidential data stored on Generic Sample Company, LLC systems. This information
may be retained until legal, regulatory and business requirements have been met.
Retention of specific cardholder authorization details, including PIN numbers and CVV2 is not
allowed under any circumstance.
3.2 DisasterRecovery and Data Backup Procedure
Disaster Recovery Plan: Generic Sample Company, LLC. utilizes VMWare Site Recovery
Manager to replicate critical Database and Web files to the collocation site. This occurs 24 hours a
day, 7 days a week, and 365 days a year whenever a file is detected. This is monitored daily.
Essential data is backed-up every 15 minutes. Full operation capability is paramount and attainable
within 2 hours. A Disaster Recovery test is performed every 30 days for internal failover and bi-
monthly for full external failover.
3.3 Encryption Method
No Generic Sample Company, LLC employees shall have visibility to the full PAN except for
those who have a legitimate business need to see the full PAN. Displaying full PAN on computer
screens,receipts,faxes, or any kind of hard copy media is against Generic Sample Company, LLC
policy. A maximum of the first six and last four digits of the PAN may be displayed. All other
digits must be masked. This policy is intended to protect credit card numbers as they are displayed
and should not be confused with stricter requirements relating to storage of credit card numbers,
which must utilize strong encryption, hashing or truncation.
Any application used by Generic Sample Company, LLC that displays credit card information
must be configured to hide or mask that sensitive or confidential data (if possible). If the purpose
of the application involves displaying the full credit card number, or other personal data, approval
for its use must be given by the Information Technology Department. In all cases,this type of
application must be limited to the fewest possible number of required users.
3.4 Encrypting Stored Cardholder Data
This encryption policy applies to all applicable Generic Sample Company, LLC computer systems
and primary as well as secondary storage locations, whether managed internally or by third party
vendors. Examples of primary storage locations include but may not be limited to databases and
flat files such as spreadsheets. Examples of secondary storage locations include but may not be
limited to backup media such as USB thumb drives or tapes, and audit logs such as history, error,
debugging, or transaction logs. Encryption must be employed for any stored credit card primary

account numbers (PANs) and the entire PAN shall be encrypted. Card validation codes (CVV
numbers) for card-not-present transactions and PIN blocks must never be stored post-authorization
under any circumstances.
One of the following methods must be employed to protect the PAN anywhere it is stored:
 Strong cryptography with associated key management processes and procedures.
 Truncation.
 Strong one-way hash functions with salts.
 Index tokens and securely stored pads.
3.5 Encryption Key Management
Encryption keys must be generated, accessed and stored in a secure manner.
In order to generate a strong key, a random or pseudo-random number generation algorithm must
be used. The minimum length requirements for the encryption keys are 128 bits. Examples of
acceptable algorithms are as follows:
 Triple-DES: 128 bits
 AES: 256 bits
 RSA: 1024 bits
 Follow vendor recommendations for other encryption types.
Any key used to either encrypt or decrypt cardholder data must be stored separately from general
user access. Note:Key components may only be accessed by authorized key custodians.
The Information Technology Department must authorize at least two key custodians in order to
successfully perform a key action, such as key generation or loading the key. No individual key
supervisor may have access to all pieces of a data encryption key.
A minimum of two authorized key custodians are required in order to generate keys. Each
custodian will generate one text piece used in the key generation. Any type of access to the key
generating procedures must be limited to authorized custodians and kept secure to prevent
unauthorized key generation or replacement.
Encryption key component access will only be given to key custodians with a job duty that
requires access. The Information Technology Department will be responsible for granting access
by utilizing an ‘Encryption Key Request Form’. Users who have been granted access must
complete and sign an. By signing the form, the user recognizes their responsibilities as a key
custodian. Human Resources will maintain a copy of this form in the user’s employee records.
Only those authorized key custodians will be allowed to retrieve the key components from their
secure location and distribute keys. Key custodians must track and log their activities within an
‘Encryption Key Management Log’. Before being returned to secure storage,the custodian must
place the encryption keys in secure packaging inside a fireproof safe.
During an encryption key change process, the key custodian generates a new key, decrypts the
current production data and re-encrypts the sensitive data with the new encryption key.

On an annual basis, or whenever conditions warrant a change in key integrity, the encryption keys
must be changed. Conditions for a key change include:
 Annual Rotation: Keys are to be changed once per year (minimum).
 Suspicious Activity:Keys are to be changed if any activity related to the key process
raises concern or is otherwise deemed suspicious.
 Resource Change:Keys are to be changed if a key supervisor’s employment ends or a
key custodian accepts a position within Generic Sample Company, LLC that does not
involve the key encryption process.
 Technical Requirement:Keys are to be changed if a technical issue arises that questions
the durability or security of a key (corruption or instability).
In order to dispose of an unwanted encryption key, key custodians must follow approved Generic
Sample Company, LLC methods for secure data disposal.

4 – Secure Data Transmission
4.1 Transmission Over Un-Trusted Networks
To avoid interception or misuse of data, any confidential or sensitive information that is to be
transmitted over public networks must be secured using strong encryption tactics,such as:
 Secure Socket Layer (SSL) or TLS
 Internet Protocol Security (IPSEC)
Generic Sample Company, LLC wireless networks must be protected through secure data
encryption methods, such as WPA or WPA 2 (if supported).
The minimum encryption strength for wireless networks is 128 bits and wireless encryption keys
are to be changed at least once every 90 days, or whenever an employee with knowledge of the
keys is terminated.
4.2 End User Messaging Technologies
Employees may never email unencrypted confidential or sensitive information such as credit card
PANs. If a valid business justification exists, the Information Technology Department will supply
encrypted email software to said employee. In addition, employees shall never send unprotected
PANs via other messaging technologies such as instant messaging, chat or text.

5 - Anti-Virus Policy
5.1 – Deploy Properly Configured Anti-Virus Software
All Generic Sample Company, LLC computer assets,including file servers and email servers
managed by employees or third parties, which runs the Microsoft Windows OS must comply with
this policy. The Information Technology Department must approve any policy exemption in
writing.
The Information Technology Department is responsible for approving anti-virus/anti-spyware
software and configuring it for each system. Users must not be able to disable or otherwise
configure the software. The approved software must perform real-time scans and log all anti-virus
alerts with routing to a centrallogging solution. All anti-virus software is configured and runs
daily virus signature updates and is cloud based.
In the event that a virus is detected during a real-time scan,the Information Technology
Department must be alerted at the same time.
All anti-virus software logs will be stored or archived in accordance with Generic Sample
Company, LLC logging and auditing policies and procedures. Generally speaking, logs must be
retained for at least one year with three months immediately available for analysis. Logs must
record all information necessary to reconstruct a security event. Logs should include:
 User identification
 Type of event
 Date and time
 Success or failure indication
 Origination of event
 Identity or name of affected data,system component or resource
5.2-Incident Response Plan
Based on the Incident Response Policy, the Information Security Subcommittee (ISS) will
determine how best to resolve the virus alert.
5.2.1A- Data Breach
Generic Sample Company has a comprehensive Incident Response Plan implemented for the
Information Security Subcommittee (ISS) to investigate, respond accordingly and provide training
in order to help prevent such a breach from occurring.
5.2.1B Internal Breaches
Internal incidents will be communicated in a manner allowing timely corrective action to be taken.
This plan shows how the Generic Sample Company: Information Security Subcommittee (ISS)
will handle response to an internal breach of data or information by directly involving the
correlative departmental channels, direct-line communication, internal response planning and
testing, training for response resources and awareness training all Generic Sample Company
employees, contractors and 3rd
party vendors.

6 – Develop and Maintain Secure Systems and Applications
6.1 Install the latest vendor-supplied security patches
When a vendor releases security patches,hot fixes and/or service packs; it is the IT Department’s
responsibility to apply the changes as needed. The timeframe for installation on applicable systems
is 30 days from the date of release,and the change management process must be followed.
6.2 Software Development Lifecycle
It is important to consider the control measures and security checks that will be used throughout
the software development life cycle. Proprietary software developed by Generic Sample Company,
LLC, whether internally or by a 3rd party, must utilize industry best practices for software
development.
The following is a high level overview of the various security measures to be utilized during each
phase of Generic Sample Company, LLC’s software development:
 Requirements Analysis:The developer is responsible for determining whether
application requirements are sufficiently secure.
 Design:All application components must be developed in accordance with the latest data
and network security trends.
 Development:The developer is responsible for considering vulnerabilities that might
affect the application; such as privilege/access bypass and memory bound issues.
 Code Review:In order to better identify security issues, a second developer is responsible
for conducting code reviews of all new or updated software.
 QA Implementation:It is important that the QA process does not hamper security
controls or introduce new issues or vulnerabilities.
 Staging:
 QA Testing:The application’s security features must be thoroughly tested, along with
functional and efficiency testing.
 Documentation:Directions for correct security configurations must be included with all
software feature guides and implementation/installation documentation.
 Production Implementation:It is important that the implementation process does not
hamper security controls or introduce new issues or vulnerabilities.
 Production Testing:The application’s security features must be thoroughly tested, along
with functional and efficiency testing.
 Maintenance:New code must undergo the same reviewing/testing process as outlined
above. Any future application maintenance must not hamper security controls or introduce
new issues or vulnerabilities.
6.3 Change Management Policy
Any and all changes to Generic Sample Company, LLC’s network systems, devices and software
configurations must adhere to the following Change Control Policy.
The department or staff member who proposed or implemented the change is required to complete
and submit a Change Request Form to the Information Technology Department.
In order to review the change, the following information is mandatory:

 Test Plan:Develop a set of planned tests to determine if the change is effective and does
not create additional risks or vulnerabilities within the network. Custom code changes
must be tested for common coding vulnerabilities.
 Back Out Procedures:Develop a plan to revert the systems to their original
configurations in case the change does not behave as expected.
 Documentation ofImpact:This item must be completed if the change will affect internal
or external customers in any way. Document how functionality will change for the
customer, and include any applications and procedures that will differ from the existing
system. Make a note of any upgrades or additional software the customer will be required
to install/update.
Authorized approval must be obtained for any submitted Change Request Forms.
The proposed change must first be tested on an isolated network or QA environment that is not
part of the overall network environment.
Using the approved Test Plan, ensure that the change will not adversely affect the network system
in any way. Document any issues or potential problems and then create a new Change Request
Form once those issues have been corrected. Follow the approved procedures to implement the
successfully tested change. Ensure that back out procedures are prepared and ready for immediate
invocation should an unforeseen issue arise during the change implementation.
For custom applications, a secure testing environment must be established that is separate from
Generic Sample Company, LLC’s normal business environment. Access controls must be utilized
to enforce the separation on any network that connects the testing environment to the business
environment.
Actual cardholder data must not be used during software development/testing. Generic Sample
Company, LLC personnel must make every effort to use mock data and mock credit card numbers
for testing purposes.
Once the testing process has been completed, all data (including custom accounts, usernames and
passwords) must be deleted or disabled.
The Software Development Team must never have full time read/write access to business
applications or data. Someone not part of the development team will be responsible for code
promotion to the business environment. Developers may only assist in troubleshooting during an
emergency, and will be issued a temporary, Emergency ID.
6.4 –Developand Test Web Applications Basedon Secure Coding Guidelines
Any Generic Sample Company, LLC applications that are considered web-based must be given
special consideration. While these web-based applications must adhere to the same security
measures outlined in the Development Life Cycle section, additional vulnerabilities must also be
reviewed and tested.
Secure coding training is mandatory for all Generic Sample Company, LLC developers, and their
development process must consider the OWASP guidelines. These guidelines are available at the
following website:

http://www.owasp.org
During the Code Review and Testing phase,the following vulnerabilities must be checked:
 Insecure Configuration Management
 Unvalidated Input
 Denial of Service
 Malicious Use of User IDs
 Insecure Storage
 Malicious Use of Account Credentials and Session Cookies
 Error Handling Flaws
 Cross-site Scripting
 SQL Injection and other Command Injection Flaws
 Buffer Overflows
On an annual basis, or whenever modifications have occurred, the web-based applications must
undergo penetration testing performed by a 3rd party vendor. All custom code must be reviewed
by an application security firm or have established an application layer firewall in front of web-
facing applications.

7 – Access Control
7.1 –Data Access
All data assets stored on Generic Sample Company, LLC systems must first be given a
classification level by the creator or data manager. The classification level determines who can
access the stored data.
Categories of Information:
 Public: This classification relates to data assets that pose no adverse risk to the Generic
Sample Company, LLC, and/or do not fit into the other categories below. Regardless, a
user must receive approval from Generic Sample Company, LLC’s Compliance
Department before distributing any Public data.
 Private:This classification relates to personal data assets that are intended for internal
Generic Sample Company, LLC use only. Erroneous distribution of Private data could
adversely impact Generic Sample Company, LLC. Private data often includes intellectual
property, working designs, or policies and procedures.
 Sensitive:This classification relates to business-related data assets that are intended for
internal Generic Sample Company, LLC use only. Erroneous distribution of Sensitive data
could impact Generic Sample Company, LLC, stockholders, business partners, and
customers. Sensitive data often includes audit reports and market research.
 Confidential: This classification relates to data assets that pose the most risk to Generic
Sample Company, LLC, including passwords, bank account information, cardholder data,
and encryption keys.
Generic Sample Company, LLC systems must use an automated access control mechanism.
Access controls must be configured and operational to track all access to data – including the
user’s identity, time and date, and a listing of the accessed data. This system of controls protects
sensitive data and ensures that the information is not improperly distributed, copied, modified, or
deleted.
7.2- System Access
Access to network systems and data must be limited to those employees who have been properly
authorized. Each user will be authorized to view a certain classification level. All access must be
configured to authorize only the data each user needs for their specific position or business role.
Every user must be authorized to access Generic Sample Company, LLC’s systems. Authorization
pertains to the user’s business role and will only be authorized when necessary to fulfill said role.
For employees who require access to confidential, sensitive or private information, the data access
request process must be followed. First, all requests must be approved by the Information
Technology Department. Second, the user must file a completed Authorization Request Form. Any
employee who requests access to data above their normal security clearance must follow this
procedure, as well as provide documentation that reports their access source and access time
limits.
This is the general workflow for requesting access to data:
1. User’s manager requests authorization by submitting an Authorization Request Form.

2. User’s manager must approve the request based on the employee’s role. The manager
must make note of any additional access requirements before handing the request off to
the Information Technology Department.
3. The Information Technology Department will coordinate with relevant department
managers to ensure that the user is qualified to access to their data.
4. The Information Technology Department will then hand the request off to the System
Administrator.
5. The SysAdmin will create the user’s account and forward that information to the Human
Resources Department. Human Resources will then include these credentials within the
user’s employee file.

8 – User Identification and Authentication
8.1 – Assign unique user IDs and require user authentication
Each authorized user will be given a unique account name. The user will create a secret password,
and all Generic Sample Company, LLC systems must authenticate via passwords.
8.2 Remote access authentication requirements
Access into Generic Sample Company, LLC network from outside will be granted using Generic
Sample Company, LLC approved devices and pathways on an individual user and application
basis. All other network access options are strictly prohibited. Furthermore, PII/PFI,Confidential
and/or Internal Information that is stored or accessed remotely must maintain the same level of
protections as information stored and accessed within the Generic Sample Company LLC network.
Generic Sample Company, LLC employees or 3rd
party vendors who require remote, network-
level access originating from outside the physical network must be required to provide two-factor
authentication. Two-factor authentication employs two of the three following authentication
methods:
 Something you know (example: password or passphrase)
 Something you have (example: soft or hard tokens, smart card or valid and unique digital
certificate installed on user’s workstation)
 Something you are (example: biometric)
It is not acceptable to employ one of these methods twice. For example, requiring a user to enter
two different passwords does not constitute two-factor authentication.
8.3 Password policy
User-level access must include authentication measures,such as a password. Non-authenticated
user IDs, shared IDs,and group IDs are not permitted.
Each Generic Sample Company, LLC system must employ an automated access control process.
This process will:
 Delete inactive users after a period of 90 days.
 Authenticate every account (meaning all users,systems, and applications) with a
password.
 Require passwords of at least 7 characters,which include a combination of both numbers
and letters.
 Identify every user by their unique account name:
 Mandate that a user account will be locked out of the system after 6 failed attempts to
connect. The account will remain locked until a Systems Administrator unlocks it.
 Require that new passwords not be the same as the previous four passwords. Passwords
must be changed every 90 days.
 Require that the system disconnect a user after an idle time of 15 minutes.
While this process applies to the authentication of all system users, any customer utilizing a
Generic Sample Company, LLC system must also adhere to these requirements.

Individuals granted network access for the first time and individuals requesting a password reset
must be granted a unique password that must be changed after first use. Furthermore, for all non
face-to-face password-reset requests,the System Administrator must verify the user’s identity.
Any Generic Sample Company, LLC employees or vendors that have network access must have
that access immediately revoked once their relationship with Generic Sample Company, LLC is
severed for whatever reason. Vendor user accounts should only be enabled when needed.
Furthermore, vendor access (both remote access and local access) must be monitored.
8.4 Password Control Standards
The Generic Sample Company LLC, Information Security Policy requires the use of
strictly controlled passwords for accessing Personally Identifiable Information (PII),
Protected Financial Information (PFI), Confidential Information (CI) and Internal
Information (II). (See Generic Sample Company LLC Information Security Policy for
definition of these protected classes of information.)
Listed below are the minimum standards that must be implemented in order to ensure the
effectiveness of password controls.
Standards for accessing PII, PFI, CI, II:
Users are responsible for complying with the following password standards:
1. Passwords must never be shared with another person, unless the person is a
designated security manager.
2. Every password must, where possible, be changed regularly – (between 45 and
90 days depending on the sensitivity of the information being accessed)
3. Passwords must, where possible, have a minimum length of eight (8)
characters.
4. Passwords must never be saved when prompted by any application with the
exception of central single sign-on (SSO) systems as approved by the ISO.
This feature should be disabled in all applicable systems.
5. Passwords must not be programmed into a PC or recorded anywhere that
someone may find and use them.
6. When creating a password, it is important not to use words that can be found in
dictionaries or words that are easily guessed due to their association with the
user (i.e. children’s names, pets’ names, birthdays, etc…) A combination of
alpha and numeric characters are more difficult to guess.
Where possible, system software must enforce the following password standards:
1. Passwords routed over a network must be encrypted.
2. Passwords must be entered in a non-display field.
3. System software must enforce the changing of passwords and the minimum
length.

4. System software must disable the user identification code when more than three
consecutive invalid passwords are given within a 15 minute timeframe.
Lockout time must be set at a minimum of 30 minutes.
5. System software must maintain a history of previous passwords and prevent
their reuse.

9 – Physical Security
9.1 Monitor physical access to sensitive areas
Access to areas in which information processing is carried out must be restricted to only
appropriately authorized individuals.
The following physical controls must be in place:
a. Mainframe computer systems must be installed in an access-controlled
area. The area in and around the computer facility must afford protection
against fire, water damage,and other environmental hazards such as
power outages and extreme temperature situations.
b. File servers containing PII/PFI,Confidential and/or Internal Information
must be installed in a secure area to prevent theft, destruction, or access
by unauthorized individuals.
c. Workstations or personal computers (PC) must be secured against use by
unauthorized individuals. Local procedures and standards must be
developed on secure and appropriate workstation use and physical
safeguards which must include procedures that will:
1. Position workstations to minimize unauthorized viewing of
protected health information.
2. Grant workstation access only to those who need it in order to
perform their job function.
3. Establish workstation location criteria to eliminate or minimize
the possibility of unauthorized access to protected health
information.
4. Employ physical safeguards as determined by risk analysis, such
as locating workstations in controlled access areas or installing
covers or enclosures to preclude passerby access to PFI.
5. Use automatic screen savers with passwords to protect unattended
machines.
d. Facility access controls must be implemented to limit physical access to
electronic information systems and the facilities in which they are housed, while ensuring
that properly authorized access is allowed. Local policies and procedures must be
developed to address the following facility access control requirements:
Physical access controls must be established to protect hard copy, printed materials and electronic
media used to store any Generic Sample Company, LLC information.
 Access to physical network jacks, wireless access points and handheld devices must be
restricted.
 Sensitive areas must be monitored by security cameras. The data collected must be stored
for at least 3 months.
 Relevant facility controls must monitor and/or restrict access to any systems that store or
process Generic Sample Company, LLC information.

9.2 – Handling visitors and sign in Log
It is mandatory for all Generic Sample Company, LLC employees, contractors and visitors to
clarify their reason for being on corporate premises at all times. Employees should be watchful for
unknown persons attempting to access the corporate office area.
The visitor log is located in the front lobby of Generic Sample Companys’ Corporate Office in
Suite 525, and monitored by the Information Technology Department.
The IT Department location, Generic Sample Company, LLC datacenter and other restricted areas
will not be accessible until Visitor Log is filled out and visitor(s) are signed in and validated by an
employee. Anyone accessing these areas must complete an entry in the log, and include: Name,
Date,Firm or Department, and the Name of the employee who authorized the access. This Visitor
Log information must be stored weekly.
Upon facility entry and completion of the Visitor Log, the receptionist will contact visitors’
respective employee to validate access privileges. This type of access entry log will prevent any
kind of miscommunication on Generic Sample Companys’ end.
For access to certain areas,employees may request a visitor login rights prior to the visitors
arrival. This request must be made to the IT Department 1 day prior to the scheduled visitation.
Unescorted physical access to areas containing cardholder data is strictly prohibited.
At the end of the visit, the receptionist will ensure that the visitor has properly signed out and the
respective employee has validated the departure.
As part of the new employee orientation, Human Resources will disseminate this information to
the Information Technology Department. Once received,the IT Department will either approve or
the request for a credential access. If approved,the IT Department will enter new employee
credentials into Generic Sample Company system. Whenever an employee is terminated, the IT
Department must immediately discontinue access credentials for said employee. Human
Resources will be responsible for validating proper information flow.
9.3 Store, inventory and secure media containing sensitive data securely
All electronic media storage devices or hard copy materials containing sensitive or confidential
information must be sufficiently protected by adequate physical access controls. Facility controls,
such as locks and key passes,must be used to limit ease of access to systems storing sensitive or
confidential information. As part of an annual risk assessment,the Information Technology
Department will review the security of all storage locations to ensure sensitive data is adequately
protected.
Hardcopy Media
Examples of hardcopy materials include paper reports, fax transmissions, receipts etc. Storage of
these materials is subject to the following guidelines:
 Removal of hardcopy materials from Generic Sample Company, LLC offices is
prohibited.
 Removal of hardcopy materials from Generic Sample Company, LLC data centers or
computer rooms is prohibited without prior approval from the Information Technology
Department.

 Any hardcopy material containing consumer data (confidential or sensitive) must be stored
only at approved Generic Sample Company, LLC facilities/offices, and only for the
minimum time necessary.
 Any hardcopy material containing confidential or sensitive material must be clearly
labeled.
 All hardcopy media containing confidential or sensitive information must be securely
stored in a locked container. Lockers,cabinets, storage bins and locked desks are
acceptable,but must first be approved by the IT Department. These materials are never to
be stored in an unlocked or insecure container.
Electronic Media
The disposal of information must ensure the continued protection of PII/PFI,Confidential and
Internal Information. Each entity must develop and implement policies and procedures that
govern the receipt and removal of hardware and electronic media that contain PFI into and out of a
facility, and the movement of these items within the facility. The following specification must be
addressed: Examples of electronic media includes CDs,DVDs,floppy disks, hard disks, USB
thumb drives, backup tapes, etc. Any electronic media devices that store confidential or sensitive
information must follow these guidelines:
 Confidential or sensitive information must not be copied to removable storage devices
without prior consent from the IT Department.
 With the exception of computer system backups, no electronic media is to be removed
from Generic Sample Company, LLC facilities without prior consent from the Information
Technology Department.
 Any electronic media containing consumer data (confidential or sensitive) must be stored
only at approved Generic Sample Company, LLC facilities/offices, and only for the
minimum time necessary.
 Any electronic media containing confidential or sensitive material must be clearly labeled
and stored in a secure fashion.
 Incoming or outgoing media devices are to be delivered only via secured courier or other
method approved by the Information Technology Department.
Media Inventory
Any storage devices utilized for archival or backup purposes must be retained in a secure
environment. Only Generic Sample Company, LLC personnel and the contracted storage facility
personnel should have access to the storage devices.
A Media Inventory Log must be kept in the same storage location as all hardcopy and electronic
media used for data backups. On an annual basis, an inventory of all stored media and devices will
be performed. Utilizing the Media Inventory Log, the IT Department will compare the list of in-
use media with records kept at the approved storage facility.
A member of the IT Department must perform an annual inspection of this backup storage facility
to ensure that the backups are secured and stored in a fireproof manner This check will ensure that
all security controls are in place and operational.
A unique tracking code must be applied to any storage vesselor shipping container used for
transporting backup media with sensitive or confidential information. These devices must be
registered with the IT Department prior to the transfer.
Any storage device containing sensitive or confidential data must be identified as such prior to the
transfer.

The IT Department must pre-approve potential media couriers and transport personnel.
During all media transfers,the personnel responsible will complete a Backup Media Transfer Log.
The log must clearly indicate what media has been transferred,and by whom. The log must also
include where the media is being transferred to, and a manager of the approved storage facility
must sign the log upon receipt.
9.4- Device Management Responsibilities
The team responsible for managing Generic Sample Company, LLC firewalls and routers will be
comprised of the Information Technology Department
9.5 Data disposal policy
After sensitive or confidential data is no longer required for legal, regulatory or business needs it
must be purged from Generic Sample Company, LLC systems using a method described within
this policy. This policy pertains to all data either stored in Generic Sample Company, LLC
systems, within temporary files or stored on external devices/drives.
All marked shred bins (for hardcopy materials) must be locked prior to shredding. Generic Sample
Company, LLC employees should cross-cut shred any hardcopy material containing confidential
or sensitive information as soon as possible.
The IT Department must establish an automatic deletion process to be executed on cardholder
information systems. This automatic process will occur on a nightly basis, and will remove any
sensitive or confidential data that is no longer required or has exceeded its usefulness.
Data stored in files or directories containing reusable information must be removed using a wiping
program approved by the Information Technology Department.
External media storage devices containing confidential or sensitive data must be disposed of in a
secure manner. This includes:
 Hard Disks:Perform a 7-pass binary wipe, degauss, or shred platter.
 Floppy Disks:Incinerate,shred, or melt.
 Tape storage:Degauss,incinerate, shred, or melt.
 USB drives (thumb drives), smart cards and digital media: Incinerate, or melt.
 CDs and DVDs:Destroy surface,incinerate, shred, or melt.
All confidential or sensitive data must be deleted or otherwise destroyed prior to any Generic
Sample Company, LLC computer equipment being shipped to a repair facility or other vendor for
sale or trade-in.
Floppy drives, optical disks or other removable computer storage devices may not be donated to
charity or recycled.
In the event that Generic Sample Company, LLC outsources the disposal of media or computer
equipment, only a bonded Disposal Vendor may be used. The vendor must provide a Certificate of
Destruction to Generic Sample Company, LLC.

9.6 Data Backup Plan
A data backup plan must be documented and routinely updated to create and maintain, for a
specific period of time, retrievable exact copies of information.
3.3 Backup data must be stored in an off-site location and protected from physical damage.
3.4 Backup data must be afforded the same level of protection as the original data.
DisasterRecovery Plan: There are two ways to failover to the DR site. They are called
Planned Migration and Disaster Recovery. A Planned migration is when the administrator
intentionally fails the server(s) over to the DR site event though there are no issues. This
enables them to synchronize the changes between the source and destination before failing
over to avoid any data loss. In order to perform a planned migration, the following steps
must be performed:
 Within SRM, Click on Recovery Plans
 Right click the desired recovery plan
 Choose Recovery
 In the Wizard, acknowledge the check box that you understand that this will
permanently affect the protected and recovery datacenters
 Ensure you choose planned migration from the radio button option.
 Click Next
 Verify the operation and click start to begin
In the event of a disaster that takes the primary (protected) site offline, the Disaster
Recovery option would be used. In this event you would need to log into the recovery
(DR) site and log into SRM as the protected site will be unavailable. The following steps
must be performed:
 Within SRM, Click on Recovery Plans
 Right click the desired recovery plan
 Choose Recovery
 In the Wizard, acknowledge the check box that you understand that this will
permanently affect the protected and recovery datacenters
 Ensure you choose disaster recovery from the radio button option.
 Click Next
 Verify the operation and click start to begin
Once the servers have been failed over completely to the COLO, they will need an IP
assigned to them for the COLO network (10.252.252.x/24). Once the IP has been
assigned, register the new IP with DNS by using ipconfig /registerdns.
External DNS records need to also be changed to point to the COLO public IP addresses
to enable traffic to reach the servers that will then reside in the COLO.

10 – Logging and Auditing
10.2 Events Logged
In order to reconstruct the following events, all system components must have an automated audit
trail implemented.
 Invalid logical access attempts.
 All user access to cardholder data.
 Creation or deletion of system-level objects.
 All administrative actions utilizing user IDs with access above-and-beyond that of a
general user (e.g.,root, oracle, Admin group privilege).
 Access or initialization of audit log files.
 Any user or admin authentication attempts (either valid or invalid).
10.3 Event Log Structure
All system access event logs must contain the following minimum information:
 Name of the affected data,system component or resource.
 User ID.
 Origination location of event.
 Type of event.
 Date and Time that event occurred.
 Result of the event.
10.4 Network Time Protocol (NTP)
All Generic Sample Company, LLC production systems, with the exception of Generic Sample
Company, LLC’s internal NTP servers,must be configured to utilize the internal NTP server for
time synchronization purposes.
Generic Sample Company, LLC’s internal NTP server will access time updates from the website
“time.nist.gov”. Access Control Lists (ACL) must be configured to limit those client systems
allowed to retrieve time settings from the internal NTP server. The internal NTP system must, at
all times, be running the latest version of the software.
10.5 Log Security
All event logs must be securely stored in a centralized location or on a storage device that is
protected from unauthorized access. The logs will only be accessed and viewed on a “need to
know” basis. Wireless logs must be copied onto a log server housed on the internal LAN.
Furthermore, the Information Technology Department must establish a file integrity monitoring
(FIM) system that will alert personnel in the event either unauthorized access to logs or
modification of logs occurs.
Logs must be retained for a minimum of one year with three months immediately available for
analysis. If logs are archived on removable media and stored at an offsite location, attention should
be paid to ensure that the most recent three months are kept onsite so that they can be readily
analyzed should a security event occur.

11 – Regularly Test Security Systems and Processes
11.1 Scan for rogue wireless devices
At least quarterly, the Information Technology Department must scan for the presence of
unauthorized wireless access points installed on the [Merchant DBA] network. Generic Sample
Company, LLC approved network analysis software must be used. Examples of acceptable
software include BSD Airtools, Kismet, and Wireshark.
If an unauthorized wireless access point (example: wireless router or a wireless card installed on a
server) is discovered, the incident response plan must be invoked. Rogue wireless devices are
classified as a Level 2 severity under the Generic Sample Company, LLC incident response plan.
11.2 Vulnerability Scans
On a quarterly basis, or after any significant change in the network, the Information Technology
Department must conduct internal network vulnerability scans. Significant changes might include
firewall rule modifications, product upgrades, system component installations or changes in
network topography.
ONLY a PCI ASV scan vendor is authorized to perform external network vulnerability scans.
These ASV scans must occur, at a minimum, on a quarterly basis.
If vulnerability scans uncover potential vulnerabilities, the appropriate Generic Sample Company,
LLC personnel must be notified so remediation efforts may begin. Personnel must follow the
Change Control Policy to correct high-level vulnerabilities. Additional scans must then be
performed in order to confirm compliance with Generic Sample Company, LLC security
standards.
11.3 Vulnerability Penetration Testing
On an annual basis, or after any significant change to the network or after a significant application
upgrade or modification, network and application layer penetration testing must be performed.
Generic Sample Company, LLC will utilize a 3rd party IT security firm for all penetration testing
unless approval is granted by senior management to allow a qualified internal resource with
organizational independence to perform the penetration testing.
Network layer penetration tests must include all components that support network functions and
Operating Systems. In addition, testing must include internally and externally accessible IP’s.
Application layer penetration tests must be performed internally and externally. At a minimum,
testing must consider the top 10 OWASP vulnerabilities. These vulnerabilities are available at the
following website:
http://www.owasp.org
During application layer penetration testing, the following vulnerabilities must be checked:
 Insecure Configuration Management
 Unvalidated Input
 Denial of Service
 Malicious Use of User IDs

 Insecure Storage
 Malicious Use of Account Credentials and Session Cookies
 Error Handling Flaws
 Cross-site Scripting
 SQL Injection and other Command Injection Flaws
 Buffer Overflows
If vulnerability penetration tests uncover potential vulnerabilities, the appropriate Generic Sample
Company, LLC personnel must be notified so remediation efforts may begin. Personnelmust
follow the Change Control Policy to correct high-level vulnerabilities. Additional scans must then
be performed in order to confirm compliance with Generic Sample Company, LLC security
standards.
11.4 Use Intrusion Detection Systems (IDS’s) and/or Intrusion Prevention Systems
(IPS’s)
An intrusion detection and/or prevention system must be installed, updated and configured per
vendor guidelines to monitor all Generic Sample Company, LLC networks and systems that fall
within the payment card system scope. An IDS or IPS should be located at the perimeter (example:
at the choke router) of the network zone where cardholder data is stored, processed and/or
transmitted. In addition, an IDS/IPS should be located at any critical points within this trusted
network zone. An example of a critical point would be a server containing a database where
cardholder data is stored.
Any IDS/IPS systems must be configured to alert security personnel if an intrusion is detected.
Security personnel will review the alert and determine if it is a false positive or a malicious event.
If a malicious network intrusion is confirmed, security personnel must invoke the appropriate
incident response plan.

12 – Maintain an Information Security Policy
12.1 Establish, publish, maintain and disseminate an information security policy
The Information Technology Department shall be responsible for maintaining the information
security policy and ensuring that all personnel and relevant third parties receive a copy.
All users must read and understand Generic Sample Company, LLC’s Information Security
Policies and Procedures document. By signing the Security Acknowledgement and Acceptable
Use Policy, the user is declaring an understanding of policy prior to accessing Generic Sample
Company, LLC’s network systems.
On an annual basis, the Information Technology Department must ensure Generic Sample
Company, LLC data assets are sufficiently protected by coordinating a formal risk assessment.
This assessment will identify any existing or new vulnerabilities. The information security policy
will be updated as necessary to reflect any findings from the risk assessment.
12.2 Special technology use policy
Policy Applicability
This policy must be followed by all users of special Generic Sample Company, LLC technologies,
whether employees, contractors or third parties. Exemptions may only be authorized with written
approval from the Information Security Officer.
“Special technologies” refers to wireless networks, modem use and access,and any other
employee-facing technologies used within the Generic Sample Company, LLC computing
environment. This particular policy will be updated in the future to reflect new special
technologies and their intended uses.
Approval
Integration or use of special technologies must be authorized by the Information Technology
Department, based on job function. In regards to the general user, this applies to dial-in modem
access,personalmodem deployment, and wireless network access. Approvals must be documented
in the Authorization Request Form.
Authentication
Wherever possible, user authentication mechanisms must be incorporated into Generic Sample
Company, LLC authentication systems. User authentication requirements must adhere to the strict
policies and procedures as currently defined for passwords (complex passwords, password change
process,etc.).
A strong two-factor authentication scheme (approved by the Information Technology Department)
must be used if a user is remotely accessing the Generic Sample Company, LLC network using
special technologies.
Device Inventory
The Information Technology Department must pre-approve personal modems and wireless
network interfaces and log these devices using the Special Technologies Device Inventory. Users
of these technologies must also be approved by the Information Technology Department, and
noted on the Special Technologies User List. The following users must be documented:
 Vendors with dial-in modem access.

 Employees with dial-in modem access.
 Personalmodem users.
 Wireless network users.
Device Identification
Each of these approved devices, including personal modems and wireless access points, must be
labeled with the device owner, contact information and the device’s purpose/business function.
Acceptable Use
The guidelines and restrictions listed in the Security Awareness and Acceptable Use Policy also
apply to the acceptable use of Generic Sample Company, LLC special technologies.
Permitted Locations
The placement/installation of wireless access points and dial-in modems must be authorized by the
Information Technology Department. Dial-in modems should be maintained in a location where
they are free from tampering. Wireless access devices should be installed in the ceiling plenum.
The use of these devices must be logged in the Special Technologies Device Inventory and the
Special Technologies User List.
Approved Products
The Information Technology Department must approve devices before they are installed onto the
Generic Sample Company, LLC network. The use of approved devices must be logged in the
Special Technologies Device Inventory and the Special Technologies User List.
Session Disconnect
Modems (dial-in or modem banks) must be configured to automatically disconnect a user after 30
minutes of inactivity.
Vendor Connections
Any modem used solely by a third party vendor for maintenance or support must remain
disconnected until required. The Information Technology Department must approve the activation
of these modems, or create a management procedure to handle the task. The modem must be
disabled immediately upon completion of the task.
Credit Card Data Access
Special precautions must be taken to ensure the security of credit card data made available through
a remote dial-in modem. It is forbidden to store cardholder data on local hard drives, floppy disks
or other external storage media. During a connected session, the remote PC’s cut/paste and Print
functions must be disabled.
12.3 – 12.4 Information security roles and responsibilities
Role ofInformation Security Subcommittee (ISS)
The responsibilities of Generic Sample Company, LLC’s Information Security Subcommittee
includes enforcing these policies and procedures, and working closely with the Chief Executive
Officer and Information Technology Director to identify additional areas of concern. Once
identified, the Information Security Officer works with Generic Sample Company, LLC’s
management to coordinate the repairs or changes as needed.
Further responsibilities of the CSO include:

 An annual review of the Information Security policies and procedures document.
 This annual review helps to maintain the accuracy of the document and addresses any new
or perceived threats.
 Performing an annual risk assessment that will identify new threats or vulnerabilities.
 Ensuring all third party vendors that stores or handles Generic Sample Company, LLC’s
data assets is contractually obligated to comply with PCI DSS requirements. In addition,
any connections to the third party vendors must be managed per the PCI DSS
requirements.
Information Security Subcommittee Responsibilities
In order to successfully secure Generic Sample Company, LLC’s information systems, all
departments must adhere to a consistent vision for information security. This challenge is met
through the creation of an Information Security Subcommittee (ISS)- Directors of IT, Compliance
and Human Resources Departments work with Senior Executives and relay vital information and
procedural duties to managers of each department and Generic Sample Company employees to
maintain information security standards, which will protect Generic Sample Company, LLC
assets.
More specific responsibilities include:
 Reviewing the policies and procedures annually. Creating and/or updating the Information
Security Policies and Procedures Document as necessary.
 Restricting access to sensitive areas.
 Distributing and updating incident response plans and escalation procedures.
 Implementing/coordinating Information Security Policies when and where appropriate.
 Monitoring for security alerts and informing Generic Sample Company, LLC management
and other security personnel.
 Reviewing security logs on a daily basis, and reporting any discrepancies.
The Information Technology Department approves user access based on the roles of each user.
Any requests for network access must contain an approval (either written or in electronic form)
from the Information Technology Department.
Guided by a specific business unit’s management, the IT Department will determine a user’s
access levelbased on their responsibilities and needs.
In order to determine that all access privileges are up-to-date and accurate,the Information
Technology Department will perform a bi-annual audit of all network authorizations by validating
access rights for sample user populations. If access cannot be determined based on a defined
business role, additional approvals must be collected by the Information Security Subcommittee
before access is authorized. Contractor accounts, or any other extension authorizations, must also
go through the ISS and Information Technology Department.
In the event that access must be granted to correct an issue or resolve some other network problem,
the Information Technology Department may issue access credentials. That process goes as
follows:
 Requests for emergency access credential must be made through the Information
Technology Department, who will then notify all relevant departments and the proper
System Administrator.

 Once work has been completed, the user must notify the IT Department so they can
disable the access credentials.
 To avoid delaying access,an Emergency Access Credentials Request Form must be
completed as soon as possible and filed by the IT Department. This form is located on the
T: Drive.
System Administrator Responsibilities
Representing the direct link between Generic Sample Company, LLC policies and the network,
Generic Sample Company, LLC System Administrators are vital to the upkeep of information
security.
Their prime responsibilities include:
 Restricting physical access to wireless hot spots, network jacks, hand held devices and
other network gateways.
 Managing user accounts and the authentication process.
 Applying Generic Sample Company, LLC policies and procedures when and where
appropriate.
 Assisting the Information Technology Department in analyzing and controlling access to
Generic Sample Company, LLC data.
Additional areas of responsibility include:
Any requests for access must clearly state the role of the user and how that role is associated to the
desired level of access. Any new accounts that are created by mirroring an existing user account
are required to be audited against the request or roles determined to be appropriate for access.
A user’s identity must be verified before any password resets are allowed by mail, telephone, or
email.
When the System Administrator receives notice that access has been revoked,that access should
immediately be disabled. To ensure that access for a terminated employee is revoked right away,
written procedures should be in place. The System Administrator should suspend any users who
are on an extended leave of absence or long-term disability. This employee status information can
be validated by utilizing Generic Sample Company, LLC’s Human Resources systems.
After 60 days of inactivity, a User ID should be disabled. After 90 days of inactivity, the User ID
should be removed from the system. Certain IDs, such as NT Admin or root, are exempt from this
policy but require the System Administrator to file a written waiver with the Information
Technology Department. The waiver will include documentation detailing compensating controls
around access to the accounts in question.
Any network or computer resource that is capable of displaying a sign-in message must display the
following text at some point during the login process:
This system is for the use of authorized users only. Individuals
using this computer system without authority, or in excess of
their authority, are subject to having all of their activities on
this system monitored and recorded by system personnel. In the
course of monitoring individuals improperly using this system, or
in the course of system maintenance, the activities of authorized
users may also be monitored. Anyone using this system expressly

consents to such monitoring and is advised that if such monitoring
reveals possible criminal activity, system personnel may provide
the evidence of such monitoring to law enforcement officials.
 Audit logs must be enabled to record user activities (including administration). These audit
logs must be stored for a minimum of one year,plus 90 days of online viewing
availability.
 The user must change any passwords set up by the System Administrator during their first
login. System Administrator passwords must also be unique and follow the password
policy.
 Prior to performing a password reset,the System Administrator must validate the identity
of the requester.
 Any authorized contractor accounts should be set to expire at the end of the contract. Any
necessary extensions may be requested through the Information Technology Department.
These temporary accounts should be monitored carefully.
 Accounts for terminated employees and users who no longer have a need for their level of
access and should immediately be disabled.
 When Generic Sample Company, LLC does business with a remote vendor, their access to
the system should only be authorized when needed to perform remote functions.
 Ensure authentication for access to all systems,with a focus on access to databases
containing cardholder or other highly sensitive data.
Human Resources
The Human Resources Department plays an important role in Generic Sample Company, LLC’s
information security. This is due to their direct relationship with employees (both current and
former).
As related to information security, the following duties are the responsibility of Human Resources:
 Distribute this Information Security Policies and Procedures Document to all Generic
Sample Company, LLC employees, contractors,vendors and partners.
 Work with the Information Technology and Compliance Departments to formulate
sanctions and other disciplinary actions involving violations of security policies.
 Work with the IT Department to distribute security information awareness and education
materials to employees.
 Perform background checks on those employees with access to network systems and
critical data. Checks include background, criminal, pre-employment, credit history and
references.
 Coordinate employee terminations with Access Management personnel.
Users
All users of Generic Sample Company, LLC resources,computers and network systems must
understand the importance of information security. In doing so, they will recognize their own
crucial role in safeguarding critical data and maintaining Generic Sample Company, LLC systems.
These specific responsibilities apply to all Generic Sample Company, LLC information system
users:

 Assist Generic Sample Company, LLC in meeting its business goals by understanding that
their actions have real consequences. Users must act accordingly, especially when it
pertains to information security policy.
 Avoid distributing classified or sensitive information.
 Maintain an understanding of current information security policies.
12.5 Security awareness program
The Generic Sample Company, LLC Authorized Information Security Representative (AISR) and
IT Department will execute security awareness training for all Generic Sample Company, LLC
personnel. Initial training must be provided for personnel upon hire and periodic refresher training
must occur annually at a minimum. The method of delivery as well as the topics can vary
depending upon the audience. The HR, Compliance and the IT Department will determine and
approve training methods and topics. Where training is performed in a group setting, a sign-in
sheet will be circulated for attendees to record their attendance. The Human Resources department
will maintain a record of sign-in sheets.
12.6 Employee background checks
New hire candidates for positions requiring access to sensitive systems and applications involving
credit card data, a background check will be ordered by the Human Resources Department.
12.7 Third-party information sharing – due care and due diligence
The IT Department shall maintain a list of service providers with whom Generic Sample
Company, LLC shares credit card data. Generic Sample Company, LLC must exercise due care in
maintaining written agreements between Generic Sample Company, LLC and any service
providers. Such agreements must include language where the service provider acknowledges their
responsibility to secure credit card data where they are involved in the storing, processing and/or
transmitting of this data.
In addition, Generic Sample Company, LLC must exercise due diligence prior to engaging service
providers. Service providers should be vetted thoroughly prior to establishing a formal
relationship. Part of this process should include checking references and professional
accreditations. Preference will be given to service providers who have undergone and passed the
rigors of a PCI DSS Level One Audit. Once a service provider is engaged, Generic Sample
Company, LLC must monitor the service providers’ PCI DSS compliance status annually. This
process will require Generic Sample Company, LLC to request a copy of the service providers’
Attestation of Compliance on an annual basis.
12.8 Incident response plan
Incident Identification
Employees share the responsibility of detecting and reporting security incidents. It is mandatory
for all employees to assist the incident response procedures by managing their personal area of
responsibility. The types of security incidents that an employee might likely encounter in their
daily work routine includes:
 Security event notifications (e.g.,natural disaster alerts, file integrity alerts, intrusion
detection alarms, physical security alarms).
 Fraud, such as inaccurate database information or inaccurate logs/records.
 Theft or unauthorized access (e.g.,surveillance/CCTV evidence of a break-in, missing
items, unauthorized logins, broken locks).

 Unusual system behavior, such as unscheduled system reboots or abnormal errors in
system log files/terminals).
Every employee should possess a working knowledge of these possible incident identifiers, as well
as the appropriate team member to notify. All employees must report incidents per the guidelines
in Generic Sample Company LLC Information Security Incident Response Plan, unless they are
otherwise occupied with a separate aspect of the incident response plan.
Reporting and Incident Response Plan
When an employee reports a possible incident, the Information Security Subcommittee should be
notified – especially if it deals with a critical component of Generic Sample Company, LLC’s
business environment. The Information Security Subcommittee can best assess whether a reported
issue is really a security incident or not.
To maintain the integrity of both the incident investigation and recovery process, the Information
Security Subcommittee’s personnel should be the sole investigating and remediating agent.
However,when a possible security incident is noticed the employee should do the following as
soon as possible:
 If the possible security incident involves a Generic Sample Company, LLC computer
system:
o DO NOT alter or modify the computer system. The computer should be left
powered on, with all software/programs left running.
o DO NOT power down or restart the computer.
o IMMEDIATELY disconnect the Ethernet/network connector from the back of the
computer (if applicable).
 Report the Incident:
o Contact Compliance and the IT Department and report the incident.
o DO NOT communicate this incident to other employees, with the exception of
supervisors and the Information Security Subcommittee.
o DO NOT contact the police. If necessary,communication with law enforcement
will be coordinated by the Information Security Subcommittee.
o While waiting for the investigation to begin, employees should document any
pertinent information that will aid in responding to the matter. The documentation
should include date,time, and the nature of the incident.
Incident Severity Classification
After a possible security incident is reported, the Information Security Subcommittee must
determine if the incident requires a formal response.
For incidents that do not require a formal response, the AISR and IT Department will notify the
appropriate IT personnel who will perform any necessary support services that may be necessary.
The Information Security Subcommittee should determine the appropriate response based on the
following:
 Level 1:This level corresponds with ONE instance of potentially hazardous activity, such
as an unexpected performance peak, unauthorized telnet, or corrected virus detection.
 Level 2:This level corresponds with either a second Level 1 attack,or ONE instance of an
obvious attempt to access unauthorized information/systems. This could be an attempted

download of password files/credentials, attempt to access a restricted area or unauthorized
vulnerability scan.
 Level 3:This level corresponds with either a second Level 2 attack or an actual security
breach (or serious attempt). Denial of service attacks,multi-pronged attacks,virus
infections of a critical system, broken locks, stolen documents, successfulunauthorized
access to critical systems are all Level 3 incidents.
Note: A Level 1-type attack that focuses on systems storing sensitive or confidential information
should be classified as Level 2.
Typical Response
The stages of a typical response are:identification, severity classification, containment,
eradication, recovery,and an analysis of the root cause. Finally, an overall improvement of
security controls should transpire as a result of the findings. Once an incident has been identified
and classified, the Information Security Subcommittee will be responsible to take the following
actions and work directly with the IT Department in resolving the issue:
Level 1
Contain the Incident and Monitor for Changes.
1. Whenever possible, document the user,IP address and domain of intruder.
2. Block the intruder’s access via approved technology controls.
3. Monitor for future breach attempts originating from the documented user or IP
address.
Level 2
Contain the Incident, Monitor for Changes and Warn Others.
1. Document and securely store any information associated with the incident.
2. Block the intruder’s access via approved technology controls.
3. Attempt to track down the connection’s origin.
4. If possible, contact the ISP and gather information regarding the incident or
suspected intruder.
5. Perform research as to the possible ramifications surrounding the chosen method
of attack. If applicable, re-evaluate and re-classify the severity level rating
(adhering to the Level 3 guidelines for containment, eradication and recovery).
6. Once the source is identified, notify the malicious user that Generic Sample
Company, LLC has knowledge of their activities. Warn them of future
recriminations if another attempt is ever made. If a Generic Sample Company,
LLC employee is found to be the culprit, management should work with Human
Resources to appropriately address the Acceptable Use violation.
Level 3
Contain the Incident, Eradicate the Issue,Recover and perform Root Cause Analysis.
1. For any incident involving cardholder data or systems, a notification must be
issued to the Acquirer and any related card associations.
2. Contain the incident/intruder by unplugging the network cables, applying
restrictive ACLs, deactivating the user’s ID,isolating the switch port, or
terminating the user’s session and ability to change passwords.
3. Document and securely store any information associated with the incident via
offline methods. If necessary,the Information Security Subcommittee will work

with legal counsel and Generic Sample Company, LLC management to employ
forensic specialists.
4. Continually update management on the progress of each step.
5. Delete or eliminate the intruder’s access path and any associated vulnerabilities.
6. Perform research to determine the connection’s origin.
7. If possible, contact the ISP and gather information regarding the incident or
suspected intruder.
8. Perform research as to the possible ramifications surrounding the chosen method
of attack.
Credit Card Companies – Special Response
The AISR and IT Department must follow this procedure for any security incident that involves a
potential compromise of credit card information or personal cardholder data.
1. The Information Security Subcommittee and IT Department must first contain and/or
eliminate the threat and avoid further exposure. A thorough investigation into the security
breach must be performed within 24 hours of the incident. These steps should be taken to
assist the investigation:
a. Document all steps/actions taken.
b. During the transfer of any materials or information related to the investigation,
employees must utilize chain of custody techniques.
c. Do not log on to the affected systems,change any passwords or otherwise
access/alter the systems. Do not log on as ROOT.
d. Do not turn the affected system off. It is important to isolate any compromised
systems from the network. Isolation can be achieved by unplugging the network
cable, deactivating switch ports or isolating the system to a contained environment
(e.g.,isolated VLAN). Disaster Recovery/Business Continuity procedures should
be used to recover any lost or disabled business processes.
e. Archive or store all logs and other electronic evidence.
f. Change the wireless network SSID on the AP and other non-compromised
machines (if applicable).
g. Maintain vigilant to any additional threats and monitor all cardholder information
systems.
2. Alert all relevant parties. The following should be notified:
a. U.S. Secret Service (if VISA payment data has been compromised).
b. Local FBI Office.
c. Merchant Bank.
d. If not already involved, the Incident Response and Forensic Teams.
3. Specific cards have additional procedures. Follow these procedures for any cards that
Generic Sample Company, LLC accepts:
Visa
Within 10 business days, the VISA Fraud Control Group must be provided with all the
compromised VISA accounts. The VISA Fraud Control Group will advise on how to securely
transmit any account numbers. For assistance,call (650) 432-2978. VISA will distribute the
compromised account details to issuers and will ensure the continued confidentiality of non-public
and entity information.
Mastercard
Contact Generic Sample Company, LLC’s merchant bank to obtain details on how to handle a
compromise involving Mastercard cardholder data. The merchant bank can assist with contacting
Mastercard at (636) 722-4100.

American Express
Contact Generic Sample Company, LLC’s American Express representative or call 1-800-528-
4800.
Discover Card
Contact Generic Sample Company, LLC’s Discover Card representative or call 1-800-347-3083.
JCB
Contact Generic Sample Company, LLC’s JCB representative or call 1-213-896-3718.
Root Cause Analysis and Lessons Learned
To determine the root cause of the security incident, the Information Security Subcommittee and
all affected departments/employees will meet within one week of the incident to review results of
the investigation. During this review, the effectiveness of the Incident Response Plan (located on
the T: Drive) will be evaluated. Additionally, security controls will be reviewed to determine their
effectiveness. Updates to the Incident Response Plan, security controls and other policies and
procedures will be made accordingly.
Plan Testing and Training
On an annual basis, the current plan will be tested by means of a “mock incident.” The AISR/IT
Department will facilitate and plan the incident at their discretion. All procedures outlined above
must be followed, including the follow-up session. This test will involve any and all Generic
Sample Company, LLC employees who have an active role in the Incident Response Plan.
Automated Security System Notifications
Automated intrusion detection systems, such as detection sensors and file integrity monitoring
(FIM) systems,should be configured to automatically alert the IT Department of any potential
threats. FIM solutions should be used to protect logs as well as any system-level objects. System-
level objects are anything on a system component that is required for its operation, including but
not limited to application executable and configuration files, system configuration files, static and
shared libraries and DLL’s,system executables, device drivers and device configuration files and
added third-party components.

APPENDIX – A
Generic Sample Company INFORMATION
DELEGATION FORM:1010
Appendix 1

Appendix 2

Appendix 3

Approval
By: President
Name, title Date
By: Director of IT
Name, title Date
By: Director of OPS
Name, title Date
By: Director of HR
Name, title Date
By: Director of Compliance
Name, title Date

Generic_Sample_INFOSECPolicy_and_Procedures

More Related Content

What's hot (20)

Viewers also liked (19)

Similar to Generic_Sample_INFOSECPolicy_and_Procedures (20)

Generic_Sample_INFOSECPolicy_and_Procedures