Grit finish
Download as PPTX, PDF0 likes4,160 views
This document discusses different types of exterior wall cladding materials including grit plaster, brick tile cladding, and stone cladding. It provides definitions, compositions, properties, application procedures, uses, advantages and disadvantages for each material. Grit plaster consists of cement, coarse sand and stone chips applied in two layers for a textured finish. Brick tile cladding involves laying bricks in mortar in bonding patterns. Stone cladding applies a thin layer of natural or manufactured stone to building exteriors and interiors. All three materials provide moisture resistance, durability and termite resistance as exterior finishes.
Grit finish
- 2. 1. 2. 3. 4. INTRODUCTION NECESSITY TECHNIQUES STROKS STRIPLING TEXTURE SCIOGRAPHY CONCLUSION
- 3. DEFINITION- This plaster is a textured plaster done in two layers in panels with grooves as per pattern with different type of stone chipping 10 mm. nominal size. Min thickness is 30mm. COMPOSITION – ( 1 cement : 0.5 coarse sand : 2 stone chipping (10 MM nominal size. ) Stones- Dholpur & Kotastone. TYPES OF GRIT PLASTER- types chips. Depend upon of stone PROPERTIES MOISTURE RESISTANCE - High DURABILITY - High durability TERMITE RESISTANT - Good ENVIRONMENTAL HAZARDS- Good FINISHING RESULTS - Good Textured Finish
- 4. APPLICATIONSPROCEDURE OF APPLICATION 1st LAYER- 12 mm cement plaster in 1: 4 Ratio. 2nd LAYER- 1:0.5: 2 ( 1 cement : 0.5 coarse sand : 2 stone chipping (10 MM nominal size. ) Stones- Dholpur & Kotastone. USES ARCHITECTURAL- Exterior finish of buildings. Residential, Commercial building, Intuitional buildings NON-ARCHITECTURAL-Landscape Elements Like feature wall boundary wall, Pathways. BEST SUITED FOR- Public Buildings.
- 5. RATES Grit Plaster Groove -270 RS./ sqm. -20.50Rs/Run m. ADVANTAGES- Requires Low maintenance. acoustical absorption DISADVANTAGES- It cant be use in interior because of texture finish.
- 6. DEFINITION- Brickwork is masonry produced by a bricklayer, using bricks tile and mortar. Typically, rows of bricks in courses are laid one on top of another. COMPOSITION – Brick tile230mmx115mmx40 mm ) Cement mortar – (1:3-1:5) PATTERN IN BRICK TILE – English bond, Flemish Bond , 40 other Patterns. 230 115 PROPERTIES MOISTURE RESISTANCE DURABILITY TERMITE RESISTANT ENVIRONMENTAL HAZARDS FINISHING RESULTS - - Good High durability Good Moderate Resistant Good reddish brown Texture Finish
- 7. APPLICATIONSPROCEDURE OF APPLICATION 1st LAYER- 10 mm base cement plaster in 1: 3-1:4 Ratio. 2nd LAYER-Queen closer of Brick tile (230mmx57.5mmx40mm) USES ARCHITECTURAL- Exterior finish of buildings. Residential, Commercial building, Intuitional buildings. NON-ARCHITECTURAL-Landscape Elements Like feature wall boundary wall, Pathways. BEST SUITED FOR- Public Buildings plain areas. 40 in 230 57.5
- 8. RATES Brick tile cladding -320 RS./ sqm.. ADVANTAGES- Requires Low maintenance. acoustical absorption DISADVANTAGES- It is not good in interior because of texture finish.
- 9. DEFINITION- Stone cladding is a thin layer of stone or simulated stone applied to a surface of building. TYPES OF STONES– NATURAL STONE SAND STONE , LIME STONE, GRANITE,QUARTZITE MANUFACTURE D STONE MARBLE , MOSAIC, POLISHED STONE, FCD STONE, SAND BLASTED STONE STONE
- 10. PROPERTIES MOISTURE RESISTANCE DURABILITY TERMITE RESISTANT ENVIRONMENTAL HAZARDS FINISHING RESULTS textured as/ stone - Good High durability High High Resistant Smooth &
- 11. APPLICATIONSPROCEDURE OF APPLICATION 1st LAYER- 10 mm base cement plaster in 1: 3-1:4 Ratio. 2nd LAYER- Stone panel as/ Spcs. USES ARCHITECTURAL- Exterior & interior finish of buildings. Residential, Commercial building, Instuitional buildings. NON-ARCHITECTURAL-Landscape Elements Like feature wall boundary wall, bird bath Pathways & fire place. BEST SUITED FOR- interior & exterior both
- 13. RATES Rough stone Local stone Polished stone -320 RS./ sqm. - ADVANTAGES- Requires Low maintenance. Easy to clean. Good appearance. Cheap in hilly areas. DISADVANTAGES- costly in Plain areas ,