CS Unitec Hacksaws Catalog Pages
0 likes748 views
CS Unitec offers a range of portable hacksaws suitable for on-site cutting of pipe and structural steel, with options for pneumatic, electric, and hydraulic power. These saws are designed for demanding environments such as refineries and construction, featuring safety features for use in hazardous areas. Additionally, a variety of accessories and saw blades enhance performance and adaptability for different materials and cutting requirements.
![Hacksaw Accessories
Heavy-duty cutting of pipe and structural steel
Clamps for Pipes and Profiles
Ensure 90˚ cuts through pipe and profiles
HACKSAW ACCESSORIES
Large Pipe Clamp with lever Model No. 5 1207 9910
lock for no-tools tightening, 2" to 6" OD pipe clamp
Model 5 1202 9950 (below)
Model No. 5 1202 9950
4" to 12 3/4" OD pipe clamp –
lever lock provides no-tools
tightening of chain (up to Small Pipe Clamp,
24" OD with extension chain Model 5 1207 9910
shown below)
Model No. 5 1202 9960
4" to 12 3/4" OD pipe clamp –
manual tightening of chain Up to 6"
(up to 24" OD with extension pipe dia.
Large Pipe Clamp, chain shown below)
Model 5 1202 9960
Profile Clamp,
Lever Lock Assembly Model 5 1207 8970
Part No. 5 1202 9970
Model No. 5 1207 8970
Can be used to retrofit 21 5/8" x 11 3/8" profile
manual clamp 5 1202 9960
for no-tools tightening of clamp
chain. Also fits similar clamps.
Extension Chains for Pipe Clamps
• Extend capacity of pipe clamps up to 24" OD
Model No. 5 1201 9010 – 17 3/4" chain extension
Model No. 5 1201 9030 – 39 3/8" chain extension
(allows pipe clamp Nos. 5 1202 9960 and 5 1208 9940 to fit 24" OD pipe)
Clamps for Pipes and Profiles
Model No. CP1 – Universal Clamp
• Self-aligning feet adjust to the form of the
workpiece (round, square and angled)
• Accommodates 1/2" to 12 3/4" OD [up to 24" OD
with extension chain no. CP1/10 (393/8" long)]
• CP1 easily attaches to most of our
reciprocating saws for 90˚ cuts in tight spaces
• 1-800-700-5919 • Visit our Web site at www.csunitec.com 17](https://image.slidesharecdn.com/hacksawscatalogpages-111130092600-phpapp01/85/CS-Unitec-Hacksaws-Catalog-Pages-4-320.jpg)
CS Unitec Hacksaws Catalog Pages
- 1. Portable Hacksaws for Tough Duty On-site cutting of pipe up to 24" OD and structural steel Pneumatic • Electric • Hydraulic PORTABLE HACKSAWS CS Unitec's power hacksaws offer a wide range of options for portable cutting of pipe, structural steel, tanks and other materials. Our saws are designed for the toughest service in refineries, power plants, utilities, offshore oil, construction and demolition applications and are ideal for shutdowns and turnarounds in process piping industries. CS Unitec's pneumatic saws are safer than cutting with a welding torch in hazardous areas or confined spaces. • Compact size, ideal for cutting in confined spaces • 2 3/8" blade stroke • Pipe clamps for 90˚ cutting of up to 24" OD pipe • Profile clamps for structural steel • Wide variety of blades and accessories for cutting steel, stainless steel, aluminum, plastic, wood and ductile iron • Optional blade guide to ensure right-angle cuts • Automatically cut pipe with our optional self- feeding, pneumatic-powered pipe clamp system Assorted pipe clamps for pipes up to 24" OD or profile clamps for structural steel Twist or lever throttle (see page 17) Manual or Pneumatic, electric automatic feed or hydraulic motor Pneumatic: Heavy-duty saw 3/4" NPT Connection blades from 8" to Electric: 37" long 110 Volt (220V available) Hydraulic: 1/2" FF (HTMA) Couplings HSS, HSS-SL, carbide-coated Optional saw blade guide and Diamond- for added blade stability – coated ensures straight cutting! blades Two sizes available available (Not required – see page 18) (see page 19) 14 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
- 2. Portable Pneumatic Power Hacksaws Pneumatic power for hazardous environments Model 5 1212 0050 • Pneumatic motor with variable speeds with lever throttle • Ideal for cutting pipe, tanks, structural PORTABLE HACKSAWS Pneumatic steel, profiles and other materials • Designed for the toughest service in refineries, chemical plants, utilities, pipelines, ATEX Certified construction, Pipe Capacity 3/4" NPT Air Connection offshore oil and 24" OD ATEX Certified for Ex Zone EX II 2 GcT5 demolition applications Profile Capacity • Cut pipe up to 24" 21 3/4" h x 11 1/2" w Throttle Types for Pneumatic Saws: OD in one pass Roll Throttle (air model 5 1212 0010 only) – • Chain clamps and profile clamps used only with automatic feed available for accurate 90˚ cutting of pipe clamp (see page 18) pipe and structural steel Lever Throttle (model 5 1212 0050) – provides • 2 3/8" stroke for heavy-duty cutting on/off paddle switch for manual • Ideal for cutting in confined spaces cutting with clamp • Accommodate heavy-duty blades up to 37" long • Optional saw blade guides to increase Clamps blade stability (see page 18) Manual Automatic • Pneumatic pipe clamp system available for automatically cutting pipe; easily attaches to pneumatic hacksaw and shares same air supply (see accessory No. 5 1208 9980 on page 18) Accessory Saw Blades Clamps for Pipes and Profiles – manual and (see page 19) automatic-feed clamps for straight, 90˚ cutting of pipes and profiles (see pages 17-18) • HSS (High-speed Steel), HSS-SL (for stainless steel and hard metal), Carbide Coated and Diamond Coated Model Strokes Blade Weight Power Throttle Motor Specifications Hose No. per Min. Stroke (lbs.) Pneumatic - 3/4" ID NPT Air Connection 5 1212 0010 1.5 HP Roll Air Consumption: 51 CFM 100-350 2 3/8" 1/2" ID 15.4 5 1212 0050 1.5 HP Lever Air Pressure: 90 PSI 100-350 2 3/8" 1/2" ID 15.4 • 1-800-700-5919 • Visit our Web site at www.csunitec.com 15
- 3. Portable Power Hacksaws Electric and hydraulic power • Electric or hydraulic motor with variable speeds Model 5 1215 0070 with variable speed • Ideal for cutting pipe, tanks, structural steel, PORTABLE HACKSAWS Electric profiles and other materials • Designed for the toughest Pipe Capacity service in refineries, chemical 24" OD plants, utilities, pipelines, construction, offshore oil and Profile Capacity demolition applications 21 3/4" h x 11 1/2" w 11 Amps / 110 Volt (220 Volt Available) • Cut pipe up to 24" OD in one pass • Chain clamps and profile clamps available for Model 5 1220 0050 accurate 90˚ cutting of pipe and structural steel with lever throttle Hydraulic • 2 3/8" stroke for heavy-duty cutting • Ideal for cutting in confined spaces • Accommodate heavy-duty blades up to 37" long • Optional saw blade guides to increase blade stability (see page 18) 1/2" FF Couplings • Automatic-feed pipe clamp system available for automatically cutting pipe – saves operator time and makes work easier (see accessory No. 5 1208 9990 on page 18) Clamps Accessory Manual Automatic Saw Blades (see page 19) • HSS (High-speed Steel), HSS-SL (for stainless steel and hard metal), Carbide Coated and Diamond Coated Clamps for Pipes and Profiles – manual and automatic-feed clamps for straight, 90˚ cutting of pipes and profiles (see pages 17-18) Model Strokes Blade Weight Power Throttle Motor Specifications Hose No. per Min. Stroke (lbs.) Electric - 11 Amps / 110 Volt** 5 1215 0070* 1.5 HP Trigger 110V/60 Hz (220V/50Hz is available) 200-400 2 3/8" Cable 13 Hydraulic - 1/2" FF (HTMA) Couplings 5 1220 0050 3.8 HP Lever Oil Flow: 4 GPM at 2000 PSI 100-500 2 3/8" 1/2" ID 13.5 * Model 5 1215 0070 has an electronic speed control dial. **Also available as 220 Volt/50 Hz 16 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
- 4. Hacksaw Accessories Heavy-duty cutting of pipe and structural steel Clamps for Pipes and Profiles Ensure 90˚ cuts through pipe and profiles HACKSAW ACCESSORIES Large Pipe Clamp with lever Model No. 5 1207 9910 lock for no-tools tightening, 2" to 6" OD pipe clamp Model 5 1202 9950 (below) Model No. 5 1202 9950 4" to 12 3/4" OD pipe clamp – lever lock provides no-tools tightening of chain (up to Small Pipe Clamp, 24" OD with extension chain Model 5 1207 9910 shown below) Model No. 5 1202 9960 4" to 12 3/4" OD pipe clamp – manual tightening of chain Up to 6" (up to 24" OD with extension pipe dia. Large Pipe Clamp, chain shown below) Model 5 1202 9960 Profile Clamp, Lever Lock Assembly Model 5 1207 8970 Part No. 5 1202 9970 Model No. 5 1207 8970 Can be used to retrofit 21 5/8" x 11 3/8" profile manual clamp 5 1202 9960 for no-tools tightening of clamp chain. Also fits similar clamps. Extension Chains for Pipe Clamps • Extend capacity of pipe clamps up to 24" OD Model No. 5 1201 9010 – 17 3/4" chain extension Model No. 5 1201 9030 – 39 3/8" chain extension (allows pipe clamp Nos. 5 1202 9960 and 5 1208 9940 to fit 24" OD pipe) Clamps for Pipes and Profiles Model No. CP1 – Universal Clamp • Self-aligning feet adjust to the form of the workpiece (round, square and angled) • Accommodates 1/2" to 12 3/4" OD [up to 24" OD with extension chain no. CP1/10 (393/8" long)] • CP1 easily attaches to most of our reciprocating saws for 90˚ cuts in tight spaces • 1-800-700-5919 • Visit our Web site at www.csunitec.com 17
- 5. Hacksaw Accessories Automatic feed pipe clamps save time and effort Self-feeding Pipe Clamp for Pneumatic Saws HACKSAW ACCESSORIES Air-Powered Model No. 5 1208 9980 – Automatic Clamp Clamp • Save time and effort by automatically cutting pipe up to 12 3/4" OD (up to 24" OD with extension chain – see page 17) • Self-feeding device saves operator time, increases safety and makes work easier • Easily attaches to CS Unitec air hacksaw and shares same 90 PSI air supply (Pipe clamp for use only with CS Unitec air hacksaw Model No. 5 1212 0010) • Blade guide for straight cutting through pipe and difficult materials is optional (see below) Self-feeding Pipe Clamp for Electric and Hydraulic Saws Model No. 5 1208 9990 – Automatic Clamp Self-Feeding Mechanical • Save time and effort by automatically cutting pipe up to Clamp 12 3/4" OD (up to 24" OD with extension chain – see page 17) • Self-contained gas cylinder provides constant feed pressure to saw blade • Saves operator time, increases safety and makes work easier • Easily attaches to CS Unitec electric hacksaw 5 1215 0070 or hydraulic hacksaw 5 1220 0050 • Optional blade guide for straight cutting through pipe and difficult materials (see below) Blade Guides Optional guides with two roller bearings • Ensure straight cutting through pipe and difficult materials Model No. 5 1207 9970 for pipes up to 13" (20" min. blade length required) Model No. 5 1207 8910 for pipes up to 21" (30" min. blade length required) 18 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
- 6. Hacksaw Blades - 8" up to 37" long Heavy-duty cutting of pipe and structural steel HACKSAW BLADES Extra thick for 90˚ cutting HSS or HSS-SL Saw Blade Shown *Use HSS-SL Blades for best cutting performance on stainless steel and hard metal. Use ProLube™ Specialty Lubricants with Hacksaw Blades to help tools work cooler, longer and more efficiently. ProLube Lubricants are non-toxic and ideal for stainless steel and hard metal cutting applications. See page 34. Dimensions Steel and Plastic Ductile/Cast Iron Max. Dia. Order No. Length Teeth/Inch Thickness Nonferrous Metal and Wood and Masonry of Cut Z22-9 HSS 8" 8 1/16" Steel/Aluminum Plastics – 31/8" Z22-10 HSS 8" 16 1/16" Steel – – 31/8" Z22-11 HSS 8" 24 1/16" Sheet Metal – – 31/8" Z22-6 HSS 12" 16 1/16" Steel – – 65/8" Z22-6 HSS-SL* 12" 16 1/16" Stainless Steel – – 65/8" Z22-6 Carbide 12" Coated 3/16" – – Masonry 65/8" Z22-31 HSS 12" 12 1/16" Steel – – 65/8" Z22-71 HSS 12" 4 1/16" – Plastics/Wood – 65/8" Z22-83 TDS 12" Coated 3/32" – – Ductile Iron 65/8" Z22-7 HSS 16" 16 1/16" Steel – – 105/8" Z22-7 Carbide 16" 16 1/16" – – Masonry 105/8" Z22-29 HSS 16" 8 1/16" Steel/Aluminum Plastics – 105/8" Z22-32 HSS 16" 4 1/16" – Plastics/Wood – 105/8" Z22-33 HSS 16" 6 1/16" Cast Iron Plastics Cast Iron 105/8" Z22-86 TDS 19" Coated 7/64" – – Ductile Iron 13" Z22-72 HSS 20" 14 5/64" Steel – – 145/8" Z22-72 Carbide 20" Coated 3/16" – – Masonry 145/8" Z22-30 HSS 21" 12 1/16" Steel – – 155/8" Z22-30 HSS-SL* 21" 12 1/16" Stainless Steel – – 155/8" Z22-40 HSS 21" 4 1/16" – Plastics/Wood – 155/8" Z22-73 HSS 24" 14 5/64" Steel – – 181/2" Z22-73 Carbide 24" Coated 3/16" – – Masonry 181/2" Z22-74 HSS 24" 8 5/64" Steel/Aluminum Plastic – 181/2" Z22-75 HSS 30" 12 5/64" Steel – – 247/8" Z22-75 HSS-SL* 30" 12 5/64" Stainless Steel – – 247/8" Z22-76 HSS 30" 6 5/64" Plastics/Wood 247/8" – – Z22-37 HSS 37" 12 5/64" Steel 317/8" – – • 1-800-700-5919 • Visit our Web site at www.csunitec.com 19