Health Monitoring Using Li-Fi Technology

International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 09 Issue: 02 | Feb 2022 www.irjet.net p-ISSN: 2395-0072
© 2022, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 465
Health Monitoring Using Li-Fi Technology
Sakthivignesh A1, Narasimman S2, Nanda kumar G3
1-3UG Student, Department of ECE, Sri Ramakrishna Institute of Technology, Tamil Nadu, India
---------------------------------------------------------------------***----------------------------------------------------------------------
Abstract - With the tremendous developing devices, their
use and their improvements prompted the headway in the
Wi-Fi which gives an innovation purported Light devotion.
Li-Fi is an innovation that utilizes Driven light which helps
in the transmission of information substantially more
quicker and adaptable than information that can be sent
through Wi-Fi. Light reaches almost all over the place so
correspondence can likewise go can be communicated
through Wi-Fi. Light reaches almost all over the place so
correspondence can likewise come with light uninhibitedly.
Li-Fi is a part of optical remote correspondence which is an
arising innovation. By involving apparent light as
transmission medium, Li-Fi gives remote indoor
correspondence. The piece rate accomplished by Li-Fi can't
be accomplished by Wi-Fi.. Li-Fi is the exchange of
information through light by removing fiber from fiber
optics and sending information through LED light. Li-Fi is
the impending and on developing innovation acting as
equipped for different other creating and currently created
innovations. Since light is the significant hotspot for
transmission in this innovation it is extremely beneficial and
implementable in different fields that isn't possible with the
Wi-Fi and other advances. Thus the future uses of the Li-Fi
can be anticipated and reached out to various plat-
structures like training fields, clinical field, modern regions
and numerous different fields. We propose Li-fi Technology
for wellbeing checking.
Keywords : Li-Fi ,VLC, Wi-Fi
1.INTRODUCTION
A 5G innovation as is commonly said, LIFI is instituted as a
huge MIMO apparent light correspondence organization
which utilizes LEDs. A future innovation that assurances to
supplant the most recent 4G frameworks of
correspondence. The current advancements which utilize
WIFI characterize it as any "remote neighborhood (WLAN)
items that depend on the Foundation of Electrical and
Gadgets Designers' (IEEE) 802.11 norms". LIFI is
considered another option or a trade to the at present
utilized WIFI. With a depleted and blocked network, it was
important to verbalize our brains into a innovation which
not exclusively is pervasive yet additionally a ingenious
amount. Teacher Harald Haas during his TED worldwide
talk legitimately authored LIFI as what's to come
impending innovation. Calm critical measures of benefits
make LIFI an intense innovation. Apparent light is
characterized as having a frequency in scope of 400
nanometers to 700 nanometers, which masters to have
multiple times more extensive range than the radio wave
range utilized in WIFI. This innovation further enjoys the
quintessential benefit of not requiring any base stations
and fundamentally requiring unlicensed administrations.
Exceptionally high information rates can be accomplished
due to low impedance, high gadget transfer speeds and
high power optical result. In addition, it is non-risky
what's more a protected innovation which could in fact be
utilized in riverbeds and is practical. These masters of LIFI
surpass it from different advances..
2. Existing system
In a current arrangement of marine applications RF signal
based correspondence is utilized. So recieving wire is
utilized for communicating and getting is utilized. RF
correspondence is numerous standard like Bluetooth, Wi-
Fi and so forth In gadgets emanate the RF energy and
impart to all gadgets. Adjustment and demodulation are
utilized. It examination of the uncoded IEEE 802.15.7 CSK
PHY, alluded to as the TriLED (TLED) framework since it
utilizes three shading LEDs (Trichromatic LEDs) as a
source. The issues inside the TLED CSK framework
connected with the location interaction and image
planning have been tended to. A profoundly original four
shading LEDs based CSK regulation, alluded to as five
shading Drove framework, is introduced which beats the
issues inside the TLED plot and gives a superior exhibition
utilizing the accessible chromatic (or shading) and the
force (or sign) spaces effectively.
3. PROPOSED SYSTEM
In the proposed framework we are combining a five
tones into the single tones for the transmission of the
information. Because of this blending the shaded
information detail will be move into the single shading
which have high intensity.Here we are utilizing prompted
move the data.The information sign will be move
contingent on the clock and counter. The drove flickering
demonstrates the information moving interaction from the
transmitter. In proposed framework we involving the
drove as transmitter and photograph finder as beneficiary.
These specialized gadgets will send the information. In
this proposed framework we are send the information.
Information are encoded and send by means of driven.
The photograph locator gets the light energy and decoded
into unique structure.

4. BLOCK DIAGRAM
EXPLANATION
All kind of information is changed over into double
structure and encoded for transmission. That information
as a heartbeat produced by miniature regulator. The
transmission gadget as Driven. The getting gadget is
photograph locator that gets the information. Information
is decoded and changed over into unique structure.
Apparent light correspondence is Exceptionally basic, on
the off chance that the Drove is on, you send a
computerized 1, assuming it's off you communicate a 0.
The LEDs can be turned here and there rapidly, which
offers pleasant chances for communicating information."
So what you expect at all are a few LEDs and a regulator
that code information into those LEDs. We need to simply
shift the rate at which the Drove's glint contingent on the
information we need to encode. Further upgrades can be
made in this technique, such as involving a variety of LEDs
for equal information transmission, or utilizing
combinations of red, green and blue LEDs to modify the
light's recurrence with every recurrence encoding an
alternate information channel. This imperceptible on-off
action empowers a sort of information transmission
utilizing double codes: turning on a Drove is a consistent
'1', turning it off is a sensible '0'. Data can consequently be
encoded in the light by changing the rate at which the
LEDs glint on and off to give various series of 1s and 0s.
5. EXPERIMENTAL SETUP
WORKING
TRANSMITTER SIDE
A 4X3 grid keypad is taken that communicates numeric
information from 0-9,*, #. It is interacted with keypad
driver IC 91214 b which is otherwise called DTMF tone
generator. Each key has an alternate recurrence that is
comprised of two frequencies one from low tone bunch
from 697 Hz-941 Hz, and the other from high tone bunch
from 1209 Hz1477 Hz. The tone created is a DTMF
recurrence which is changed over from computerized to
simple structure by this IC. The result of this IC is taken
care of to the operation amp 741c to forestall signal
misfortunes. This IC is additionally associated with push
pull intensifiers. A two way switch is given to choose
keypad or a receiver. Assuming that the switch is on,
mouthpiece is chosen else the keypad is chosen. A variable
obstruction is given to change the intensification and
sound of the speaker. At the result of the semiconductors a
light is associated with convert simple signs into light
structure. While then again mouthpiece changes sound
over to simple structure.
RECEIVER SIDE
Sign got in the light structure is identified by the
photodiode which changes the light sign over to simple
structure. The photodiode is associated with the operation
amp to lessen mutilation misfortunes. The result of the
operation amp is associated with the IC MT8870 which a
DTMF collector. Likewise the result of opamp is associated
with the speaker to change yield simple sign over to sound
structure. IC MT 8870 proselytes yield simple sign to
sound structure. IC MT 8870 believers the simple sign to
advanced structure and comprehends the recurrence got
and changes over it into 4-cycle BCD structure for showing
on 16x2 LCD. Microcontroller AT89c51 is utilized to
communicate LCD and DTMF recipient. AT89c51 takes the
BCD input from the DTMF recipient and showcases it on

the 16x2 LCD. IC 7805 is utilized, which is a voltage
controller that means down 8V stock to 5V for the working
of circuit.
HARDWARE
 DHT11: This DFRobot DHT11 Temperature and
Mugginess Sensor includes a temperature and
moistness sensor complex with an adjusted
computerized signal result. By utilizing the select
advanced sign procurement procedure and
temperature and moistness detecting innovation,
it guarantees high dependability and great long
haul soundness. This sensor incorporates a
resistivetype moistness estimation part and a NTC
temperature estimation part, and interfaces with
an elite exhibition 8-cycle microcontroller,
offering astounding quality, quick reaction,
antiinterference capacity and costeffectiveness.
 ARDUINO UNO: It plays an important role. It gets
the information from the Ultrasonic sensor and
processes it. It compares the receiver data with
the threshold level and accordingly output is
generated.
 LED: A light-emitting diode (LED) is a two-lead
semiconductor light source. It is a pnjunction
diode, which transmits light when enacted. At the
point when an appropriate voltage is applied to
the leads, electrons can recombine with electron
openings inside the gadget, delivering energy as
photons. This impact is called
electroluminescence, and the shade of the not set
in stone by the energy band hole of the
semiconductor.
 Photodiode: A photodiode is a semiconductor
gadget that converts light into current. The
current is created when photons are invested in
the photodiode. A limited quantity of current is
additionally delivered when no light is available.
Photodiodes might contain optical channels,
worked in focal points, and may have huge or
little surface regions. Photodiodes typically have a
more slow reaction time as their surface region
increments. The normal, customary sun oriented
cell used to produce electric sun based power is a
huge region photodiode.
6. RESULTS
The output of the three sensors are displayed in the LCD
as shown in the Figure .The information regarding the
patient is sent to the end user using the mobile application
LiFi data monitoring.
7. CONCLUSIONS
The normalized TLED CSK framework in view of CBC-1 of
IEEE 802.15.7 has been examined, and a recently planned
Drove CSK framework has been introduced and suggested
over the current TLEDCSK framework in light of their
blunder execution in an AWGN and dispersive optical
remote channel with and without the incorporation of the
cross-talk and inclusion misfortunes. The Drove
framework has improved least Euclidean distance
between the information images at the transmitter
because of the utilization of four LEDs and furthermore
permits first and second request Dim planning. The
exhibition assessment shows that, contrasting with TLED
conspire, Drove.
8. Benefits
1. Aviation routes, Liberated from recurrence transfer
speed issue.
2. Increment correspondence security.
3. More astute power plants.
4. Under ocean Wonder.
5. Benefit of not requiring any base stations.
6. Principally requiring unlicensed administrations.
7. Extremely high information rates can be accomplished
because of low obstruction, high gadget transmission
capacities.
8. Focused energy optical result.
9. It is non-unsafe and a protected innovation which could
actually be utilized in riverbeds and is Practical.
9. REFERENCES
[1] Zhenhua Yu, Arthur J. Redfern and G. Tong Zhou,(
2014)” Using Delta-Sigma Modulators in
Visible Light OFDM Systems’’.
[2] Dr. Naveen Rathee, Abhinav Malik,Shreyaa Nagpal
,(2014)”Transmission of Numeric Data and Voice
Using Light Fidelity (LIFI) Technology”.
[3] Giorgio Corbellini, Stefan Schmid, Stefan
Mangold Thomas R.Gross,Armen
Mkrtchyan,(2012)” LEDto-LED Visible Light
Communication for Mobile Applications”.

[4] Alexander McBride, Burim Derveni, (2014)
”Transitioningto Hybrid Radio/Optical
Networks: Development of a Flexible
Visible Light Communication Testbed”5GU.
[5] Amrutha.S, Ansu Mathew, Rajasree.R,
Swathy Sugathan, Aravind.S“A visible light
communication system for indoor application”,
International Journal of Engineering and
Innovative Technology. 2014 Vol 3 pp.40-
42.
[6] Dhakane Vikas Nivrutti, Ravi Ramchandra
“Light fidelity : a reconnaissance of future
technology”, IJARCSSE, 2013 Vol 3 issue
11 pp 753-756.
[7] Fahad Zafar, Dilukshan Karunatilaka
,Rajendran Parthiban “Dimming schemes for
visible light communication: the state of
research”, IEEE 1536- pp.2935.
[8] Jay H. Bhut, Dhanrmrajsinh N. Parmar,
Khusbhu V. Mehta “Li-Fi technology – a
visible light communication”, International
Journal of Engineering and Research. 2014
pp. 25-28
[9] Musa.A, M. D. Baba and M. A. Mansor
“Analysis of the contention access period
(cap) model for the ieee 802.15.7 visible
light communication”, International Journal of
Computer and Communication Engineering,
2013 Vol. 2, No. 5 pp.621624.
[10] Pradip Kumar Sharma, Shailendra Rathore, Jong
Hyuk Park, Blockchainbased distributed
architecture with Li-Fi communication for a
scalable smart city network, IEEE ConsumEr
ElECtronICs magazine,
DOI:10.1109/MCE.2018.2816745 (2018), 55 –
64.

Health Monitoring Using Li-Fi Technology

More Related Content

Similar to Health Monitoring Using Li-Fi Technology (20)

More from IRJET Journal (20)

Recently uploaded (20)

Health Monitoring Using Li-Fi Technology