How to configure Dynamic nat
Download as PPTX, PDF0 likes1,308 views
This document describes configuring dynamic NAT on a Cisco 2611 XM router to translate a range of private IP addresses to public IP addresses. It defines an IP NAT pool from 172.16.1.3 to 172.16.1.20 named "tcpipguru" and configures the FastEthernet 0/0 interface as the NAT inside interface and Serial 0/0 interface as the NAT outside interface. It also creates an access list to permit traffic from the 192.168.1.0 network.
1 of 4
Downloaded 43 times
More Related Content
What's hot (20)
Ad
Viewers also liked (20)
Ad
More from tcpipguru (20)
Recently uploaded (20)
How to configure Dynamic nat
- 1. Dynamic NAT Configuration on Cisco 2611 XM router WWW.TCPIPGURU.COM
- 3. Description Configuring Dynamic NAT on R1 router. Dynamic Nat ip range’s from 172.16.1.3 to 172.16.1.20 and pool name tcpipguru.
- 4. R1(config)#ip nat pool tcpipguru 172.16.1.3 172.16.1.20 netmask 255.255.0.0 R1(config)#int fa0/0 R1(config-if)#ip nat inside R1(config-if)#exit R1(config)#int s0/0 R1(config-if)#ip nat outside R1(config-if)#exit R1(config)#access-list 1 permit 192.168.1.0 0.0.0.255