How to Test Generator's Output Using Spooky Remote
Download as PPT, PDF0 likes198 views
The document provides a guide on testing the output of a Spooky2 generator using a Spooky Remote. Users are instructed to select the '5m remote signal test - db preset' from the presets tab, enable channel overwrites, and start the generator to check if both red LEDs on the remote illuminate. If the LEDs do not light up, users should refer to the preset's notes for troubleshooting steps.
How to Test Generator's Output Using Spooky Remote
- 1. Spooky2 How to Test Generator's Output using Spooky Remote Our Users & Team
- 2. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com To ensure that the generator's signal is being transmitted successfully, we need to test its output, and the quickest way to do this is by connecting a Spooky Remote to its correct Boost socket.
- 3. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com 1. Click the Presets tab, then select the Miscellaneous Preset Collection. 2. In the center column, select the 5M Remote Signal Test - DB preset and read the important Notes.
- 4. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com
- 5. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com 3. Click the Generator Control tab, tick Allow Channel Overwrites, click the Generator Button, then click Start
- 6. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com
- 7. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com
- 8. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com If both red LEDs on the Remote illuminate, you're ready to get to work. If not, click the Presets tab again and refer to the preset's Notes for troubleshooting instructions.
- 9. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com Thank you!
- 10. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com Thank you!