How to use packet tracer

How to Use Packet Tracer
Last Update 2007.06.08
1.0.0

Copyright 2007 Kenneth M. Chipps PhD
www.chipps.com

1

What is Packet Tracer
• Packet Tracer is a program used to
illustrate at a basic level how networks
work
• This presentation will demonstrate how to
get around in Packet Tracer
• It is copied more or less word for word
from the packet Tracer Help files

Copyright 2007 Kenneth M. Chipps PhD www.chipps.com

2

Organization of Packet Tracer
• Packet Tracer has two different views
– Logical Workspace
– Physical Workspace

• Packet Tracer also has two modes of
operation
– Realtime Mode
– Simulation Mode


3

• At startup, you are in the Logical
Workspace in Realtime Mode
• You can build your network and see it run
in real time in this configuration
• You can switch to Simulation Mode to run
controlled networking scenarios
• You can also switch to the Physical
Workspace to arrange the physical
aspects, such as location, of your devices

4

• You cannot run your network while you are
in the Physical Workspace
• You should return to the Logical
Workspace after you are done in the
Physical Workspace


5

Interface


6

Interface
• The areas show on the screenshot are


7

Menu Bar - 1
• This bar provides the File, Options, and
Help menus
• You will find basic commands such as
Open, Save, Print, and Preferences in
these menus
• You will also be able to access the Activity
Wizard from the File menu


8

Main Tool Bar - 2
• This bar provides shortcut icons to the File
menu commands, including the Activity
Wizard
• On the right, you will also find the Network
Information button, which you can use to
enter a description for the current network
or any text you wish to include


9

Common Tools Bar - 3
• This bar provides access to these
commonly used workspace tools
– Select
– Move Layout
– Place Note
– Delete
– Inspect
– Add Simple PDU
– Add Complex PDU

10

Workspace Type Bar - 4
• You can toggle between the Physical
Workspace and the Logical Workspace
with the tabs on this bar


11

Workspace - 5
• This area is where you will create your
network, watch simulations, and view
many kinds of information and statistics


12

Realtime or Simulation Bar - 6
• You can toggle between Realtime Mode
and Simulation Mode with the tabs on this
bar


13

Network Component Box - 7
• This box is where you choose devices and
connections to put onto the workspace
• It contains the Device-Type Selection Box
and the Device-Specific Selection Box


14

Device Type Selection Box - 8
• This box contains the type of devices and
connections available in Packet Tracer 4.0
• The Device-Specific Selection Box will
change depending on which type of
devices you clicked


15

Device Selection Box - 9
• This box is where you choose specifically
which devices you want to put in your
network and which connections to make


16

Created Packet Window -10
• This window manages the packets you put
in the network during simulation scenarios


17

Sample Network Simulation
• Let’s create a sample network to see how
Packet Tracer simulates a network


18

• Start creating your network by loading a
background grid using the Set Tiled
Background button
• Select the
– grid_25x25.png

• for this example


19



20

• Select the Generic PC under End Devices
and drag it as the first PC onto the
workspace


21



22

• Always remember to close windows after
you're done viewing them, otherwise, they
will clutter the workspace
• Open the PC's configuration window and
change its settings by going to the Config
tab


23



24

• Change the PC's name to Tokyo
• Under Interface, click on FastEthernet and
set the IP address as 192.168.1.1


25

• It will assume other settings for you
• Make sure that the Port Status is on
• Note for future reference that you could
modify other Ethernet interface settings,
such as bandwidth, duplex, MAC address,
and subnet mask in this window
• Drag another PC to the workspace, name
it Paris and set its IP address as
192.168.1.2

26

• Make sure that the Port Status is on
• Under Connections, select the Copper
Straight-through cable, the solid black line,
and make a connection between the
devices with it
• The red lights on the link indicate that the
connection is not working
• The point is the simulator will do what you
tell it, whether that is right ort wrong

27

• Now, using the Delete tool, remove the
Copper Straight-through cable, and use a
Copper Cross-over cable instead


28



29

• The lights should turn green at this point,
and if you mouse over or hover over either
PC, you'll see the link status indicated as
up


30

• Your network should look similar to this


31



32

• Reposition your network devices by
dragging them
• Add an overall network description by
using the i button on the upper right corner
of Packet Tracer 4.0
• Then add some text labels on the logical
workspace by using the Place Note tool


33



34

• Single click on the Tokyo PC
• Turn the PC on and off and on again,
while paying attention to the link lights
• Do the same step for the Paris PC
• Turning devices off will result in red link
lights meaning that the link is down
• Save your work by using the File -> Save
As option

35

• Start with your original saved file open
• Notice you are in Realtime Mode
• Use the Add Simple PDU tool to send a
simple 1-time ping message called an
echo request, to the other PC, which
responds with an echo reply because you
have properly configured their IP address
settings

36



37

• To use the Add Simple PDU tool
– Click on it
– Click on the first PC
– Click on the second PC

• Then look down in the bottom right corner
to see if the ping was successful


38



39

• Scroll around in the User Created Packet
Window to see the different aspects of this
ping message, including an indication that
the ping was successful
• Alternatively, toggle the PDU List Window
to see a larger display of this message


40



41

• You can save one or more of these
messages as a scenario
• When you start, you are in Scenario 0
• Label this first scenario with an i note
• Different scenarios allow you to use the
same topology for experiments with
different groupings of user created packets
• Click on New to create a new scenario

42

• New scenarios will always initially be blank
• Add two packets by using the Simple PDU
tool, perhaps a PDU from Paris to Tokyo
and a different PDU from Tokyo to Paris
• Then add a little i note describing the
scenario, to complete Scenario 1
• An example is shown next

43



44

• Go back and forth between Scenario 0
and 1
• Several different scenarios can be saved
for a single network
• Now delete Scenario 1 using the Delete
button
• You are back at Scenario 0

45

• If you want to remove the PDU, you could
scroll across in the User Created Packet
Window and click on delete on the last
column
• Do so
• Delete the whole scenario


46

• Start with your original saved file open
• In Realtime Mode, send a simple PDU
from Tokyo to Paris
• Delete the PDU by using the method
learned in the previous section
• Switch to Simulation Mode


47

• In this mode, time freezes, therefore you
can watch your network run at a slower
pace, observing the paths that packets
take and inspecting them in detail packet
tracing
• Under the Event List Filters, click on
All/None to uncheck all fields, and then
click on ICMP to only view ICMP packets
in the animation

48

• Add a simple PDU from Tokyo to Paris
• The eye icon at the left of the Event List
indicates that this packet is currently
displayed as an envelope
• Click on Capture/Forward button once
• This acts like a network sniffing program,
capturing the next event that occurs on the
network

49

• Note that after clicking on
Capture/Forward, the packet in the
workspace moves from one device to
another - this is the ICMP echo request
message from Tokyo to Paris
• Another event is also added in the Event
List this reflects the change that happened
in the workspace

50

• The first time through an animation, the
meaning of the Capture/Forward is
Capture; after resetting the simulation, the
meaning would be Forward
• Adjust the speed of the animation by
dragging the Play Speed slider to the right
• Click on Capture/Forward button a second
time

51

• This captures the next network event - this
is the echo reply from Paris to Tokyo,
shown as successful with a green check
mark on the envelope, and the animation
plays faster this time
• Dragging the speed slider to the opposite
direction - to the left - would have slowed
the animation
• Click on Capture/Forward button again

52

• At this point, Paris has already sent an
echo reply to Tokyo therefore, there are no
more ICMP events left to capture
• A No More Events window will appear
notifying you of this, as shown in the
screenshot below
• Click OK


53



54

• Continuing from the last activity, click on
Reset Simulation
• This clears the entries in the Event List
except for the original packet
• Click on the packet envelope on the
workspace to bring up the PDU
Information window like the one shown in
the screenshot below

55

• This window contains the OSI model tab
which shows how the packet is processed
at each layer of the OSI model by the
current device
• Close this window, and note that this
packet is indicated in the Event List by the
eye icon
• The whole row in the Event List is also
highlighted

56

• For this row, clicking on the color square in
the Info column is equivalent to clicking
directly on the packet envelope


57



58

• Use the Next Layer and Previous Layer
buttons to see details of the packet
processing at the relevant OSI Layers
• Note that only the Out Layers can be
viewed in the case of this original echo
request message


59

• Click on the Outbound PDU Details tab
• This shows exactly what is in the PDU
headers, broken up into header type and
the individual fields in each header
• Close the PDU Information window
• Click on Capture/Forward button once


60

• Click again on the packet in the workspace
to open the PDU Information window
• Notice that this time, information regarding
the In Layers and Out Layers can both be
viewed
• Click on the Inbound PDU Details tab


61

• In this case this shows the details of the
inbound echo request packet from Tokyo
to Paris
• Click on the Outbound PDU Details
tab, which shows similar information, but
in this case for the echo reply packet from
Paris to Tokyo


62

• Click on Reset Simulation again
• This time click on Auto Capture/Play
• The echo request and echo reply will be
automatically captured, and the No More
Events message will occur automatically


63

• Click on the Back Button twice to rewind
the animation one step at a time
• Now click on the Capture/Forward button
twice to forward the packet through the
animation
• Also note the change in which packet is
highlighted in the Event List


64

• Remember that at any time, you can either
click on the packet envelope directly, or
click on the Info column in the Event List,
to open up the PDU Information window
• Click on the Back Button twice to rewind
the animation
• This time click Auto Capture/Play and the
packet animation will automatically occur

65

• Start by closing the existing workspace
and reopening your original saved file
• Open the ARP Tables for both PCs by
clicking on each PC using the Inspect tool
• The ARP tables always appear on the
same spot
• Reposition one of them to make them both
visible

66

• You can also resize the tables for better
viewing
• In Realtime Mode, send a simple PDU
from Tokyo to Paris
• Notice that the ARP tables are filled in
automatically as shown here


67



68

• Delete the PDU using the method learned
in the previous sections
• Notice that the entries in the ARP tables
are not cleared
• This is so because the ARP entries for
both devices have already been learned
• Deleting the user created PDUs does not
reset what already occurred in the network

69

• Click Reset Network
• Notice that the ARP tables are cleared
• The Reset Network button power cycles
devices by turning them off and then on
• By doing so, they lose temporary
information like the tables they learned
• Go to Simulation Mode

70

• In the Event List Filters, make sure that
ICMP and ARP are checked so that you
can view ICMP and ARP packets in the
animation
• Create a new simple PDU from Tokyo to
Paris
• Notice that since you reset the network
earlier, the ARP tables are empty

71

• ARP request packets need to be issued
before the ICMP ping packets, so that the
devices in the network can learn about
each other
• Click on Auto Capture/Play to watch the
animation
• Click on Reset Simulation


72

• Notice that even though the Event List is
cleared - except for the user created PDU,
the ARP tables still remain full
• Click on Capture/Play
• This time, since the ARP tables are full,
there are no new ARP packets issued
• Click on Reset Network
• Doing so will empty the tables

73

• Notice that a new ARP request packet
appears automatically on the Event List
• Single-clicking on the Delete button
removes the entire scenario including all
the PDUs associated with it
• Double-clicking on (delete) in the far right
column in the PDU List window deletes
individual PDUs

74

• The Reset Simulation button clears all
entries in the Event List, except for User
Created PDUs, and allows you to restart
the animation
• This, however, does not reset the device
tables
• The Reset Network button allows you to
power-cycle all of the devices in your
network

75

• It turns all devices off and then turns them
back on so the tables that the devices built
are lost along with configurations and
other information not automatically saved
• Saving your work periodically prevents you
from losing configurations and changes in
the network that you want to keep


76

How to use packet tracer

More Related Content

Similar to How to use packet tracer (20)

Recently uploaded (20)

How to use packet tracer