Huminator
0 likes279 views
The document describes the Huminator II precision humidity generator. It has fast stabilization times, high measurement stability, and a large measuring chamber. It allows for precise humidity calibrations of up to 5 sensors simultaneously and has an integrated, replaceable reference sensor to eliminate the need for an external reference system. The touch display provides intuitive operation and graphical and tabular display of measured values.
Huminator
- 1. Huminator II Precision Humidity Generator Testo Industrial Services – More assurance, better service. www.testotis.com
- 2. All advantages at a glance Easy operation, fast regulation, good stability and homogeneity ü Fast stabilisation time (e.g. 3 min from 35%RH to 80%RH at 25°C) ü Highest measuring stability due to optimal insulation of the chamber and high-end sealing adapter plate ü Large measuring chamber (Ø 160 mm, depth 320 mm) ü No condensation inside the measuring chamber through a regulation along the dew point ü Guaranteed mobility- the compact size and the minimal weight ensure an extremely flexible use of the Huminator II. ü Wide temperature and humidity range from 5°C to 50°C and from 5%RH to 95%RH ü New touch display enables a fast and intuitive operation ü Graphical and tabular view as well as storage and evaluation of measured values ü Integrated, easily accessible and replaceable reference sensor, that eliminates the need for an external reference system ü Possibility to program measuring points and procedures individually
- 3. humidity control temperature control measuring chamber reference and control probe (temperature + humidity) peltier element (heat ex- changer) +/-°C +%rH -%rH set points/ actual values touch display (entry of set points, indication of actual values) humidifier drying (e. g. silica gel) Testo 6681 Precise humidity calibrations The Huminator II offers the possibility to perform a rapid and easy humidity calibration of measuring instruments, sensors and data loggers of all manufacturers. The supplied adapter plate enables a calibration of up to five sensors at a time- wi- thout deterioration of the homogeneity. Thus, a high level of efficiency is guaranteed. The timely programming function allows a large degree of auto- mation of calibrations since up to 10 humidity and temperature values can be retrieved automatically one after another. The stabilization time can be selected freely. With the help of a Peltier- element, the integrated temperature regulation generates and stabilizes temperatures in a range from 5°C to 50°C. Relative humidity can rapidly be produced in a range from 5%RH to 95%RH by a high performance humidi- fication system. Concept of the removable sensor The Huminator II is equipped with a reference probe which is integrated into the measuring chamber but which is nevertheless easily accessible. It can be exchanged without any problems or removed for recalibration. Your advantages: ü No need for an additional reference measuring instrument ü Only the reference sensor has to be sent in for recalibration. ü Downtimes due to the recalibration can be avoided through the optional purchase of a second reference sensor.
- 4. Easy to use via the touch display Due to the touch display, the measuring values are comfortable to control. The clear menu structure enables an intuitive and simple handling. Help texts are additionally at your disposal. With the touch display, the Huminator II can be programmed in a few steps. If required, this process can also be conducted via the USB interface. Furthermore, an acoustic signal helps the user to control the stability and the filling level indicator of the water. Large measuring chamber The large and extremely solid measuring chamber provides enough space for up to five sensors or several data loggers at the same time. An optimal insulation of the chamber in con- junction with a special sealing adapter plate ensure the stability of the measuring values in a wide range of temperature and humidity. Menu overview Tabular view Chart Settings
- 5. On-site use The intelligent use of materials enables a total weight of only 19 kg. This makes the Huminator II mobile and flexible to use. The water can be drained automatically with the help of a display command. From this it follows, that the Huminator II is quickly ready for transportation. The optimal protection is given by an optionally available transport trolley, promising excellent handling during the on-site use. Stationary use in the calibration lab The Huminator II is designed to carry out fast and precise humidity calibrations. In laboratory use, where fast processing times and continuous operation are of crucial importance, the Huminator is characterized by its outstanding performance and its reliability.
- 6. Maintenance & Service • Besides a power supply, no further external connection is required. • Directly accessible help texts are at your disposal on the the touch screen. In addition, an electronic instruction manual is provided. • The integrated reference enables a fast recalibration. Furthermore you benefit from a significant cost reduction by saving the external reference. • Due to the service access on the upper side of the housing, the drying cartridge can easily be replaced at any time. • You only need distilled water for the Huminators operation, no further operating materials are necessary. Order information Huminator II 0519.0900 Accessory Transport trolley DAkkS-Calibration 2. Reference 0519.0899 On request 0555.6610 Price on request Testo industrial services GmbH Gewerbestraße 3 79199 Kirchzarten Germany www.testotis.com info@testotis.de Transport trolley
- 7. Flexible, precise, mobile Technical Data Specifications Measuring and control range 5 to 50 °C 5 to 95 %RH Stability ± 0.02 °C (at 25 °C; 50 %RH) ± 0,3 %RH (10 to 80 %RH at 10 to 40 °C) ± 0,5 %RH (rem. measuring range) Probe accuracy at 25 °C ± 0.15 °C (0.27 °F) with PT1000 Class AA ± (1,0 %RH + 0,007 x meas. value) for 0 to 90 %RH Homogeneity ± 0.2°C ± 0,5 %RH Stabilization time 3 min (from 35 to 80 %RH at 25 °C) Ambient conditions 20 ± 5 °C Typical total measuring uncertainty of the calibration (k=2) ± 0.2 °C (10 to 85 %RH at 25 °C) ± 0.5 °C (rem. measuring ran- ge) ± 1.5 %RH (10 to 85 %RH at 25 °C) ± 2.0 %RH (rem. measuring range) General data Display Touchscreen Number of probe slots 5 Interfaces USB, LAN Power consumption (typical) 30 W to 250 W, max: 500 W AC input voltage/ -frequency 110 V to 230 V ±10 % 50/60 Hz Tank volume Tank with a capacity of 200 ml Water level indicator Completely automatically with graphic display Display of measuring data In graphic and tabular form Control Manually or automatically programmable Stabilization signal visually and acoustically Dimensions (DxWxH) 451 mm x 448 mm x 266 mm 482 mm x 448 mm x 290 mm (incl. attachments) Size of the measuring chamber Diameter: 160 mm Depth: 320 mm Volume of the measuring chamber appr. 4.2 liters (inlet: 154 mm, depth to cooling element: 230 mm) Weight 19,8 kg Scope of delivery Drying cartridge Dry granulates with a change of color depending on the humidity content Operating material Plugs for probes (15 pieces) Power cord ISO calibration certificate Other certifications CE Approval BGV A3 approved
- 8. 0980.5194/PC/len/03.2009 448 (depth: 451) 266 Touch-Display Measuring chamber Ø 160 mm Dimension drawing Huminator precision humidity generator by Testo • Industrial Services 5 - 95 % RH 5 - 50 °C CHAMBER Power