Hyperloop presentation by ER.Washique Ahemad
Download as PPTX, PDF4 likes368 views
The hyperloop transportation system, proposed by Elon Musk, features pressurized capsules traveling through low-pressure tubes, aimed at revolutionizing transport between Los Angeles and San Francisco. It presents advantages such as speed, cost-effectiveness, and environmental sustainability, while facing skepticism regarding its estimated $6 billion development cost. Key components include capsules, tubes, and linear propulsion systems to facilitate rapid transit within the tube.
Hyperloop presentation by ER.Washique Ahemad
- 1. HYPERLOOP Transportation The fifth mode of transportation Presented by- Mohd Washique Ahemad Presented to - Mr. Shardul Singh Mr. Tauqueer
- 2. Overview 2 Introduction History Concept Conventional Modes Of Transportion Advantages Limitations
- 3. Introduction 3 A Hyperloop would be "an elevated, reduced-pressure tube that contains pressurized capsules driven within the tube by a number of linear electric motors.”
- 4. History 4 Proposed by ELON MUSK American business magnate, investor, and inventor. He is currently the CEO & CTO of SpaceX and CEO & Chief Product Architect of Tesla Motors. A high-level alpha design forthe system was published onAugust 12, 2013.
- 5. • Low pressure tube with capsules that move back and forth throughout the length of the tube. • Accelerated via a linear magnetic accelerator. • Supported on a cushion of air. • Proposed route from Los Angeles to San Fransisco (approx. 560 km). To be covered in just 35 minutes, with capsules leaving end stations every 2 minutes Concept
- 6. CONVENTIONAL MODES OF TRANSPORTATION: 6 1. RAIL relatively slow and expensive 2. ROAD relatively slow 3. WATER relatively slow 4. AIR expensive
- 7. Components of Hyperloop TransportationSystem 7 1. Capsule 2. Tube 3. Propulsion
- 8. 1. CAPSULE 8 • Sealed capsules carrying 28 passengers • The maximum width is 4.43 ft (1.35 m) and maximum height is 6.11 ft (1.10 m). With rounded corners
- 9. Contd; Hyperloop passenger capsule version with doors open at the station. 9
- 10. Contd; Hyperloop passenger capsule version cutaway with passengers onboard. 10
- 11. 2.TUBE 11 • The expected pressure inside the tube will be maintained around 100pa (less pressure). • The inner diameter of the tube is optimized to be 7 ft 4 in. (2.23 m)
- 12. Contd; Hyperloop capsule in tube cutaway with attached solar arrays. 12
- 13. 3.PROPULSION 13 Linear accelerators are constructed along the length of the tube at various locations to accelerate the capsules.
- 14. Rotor (mounted tocapsule) Stator (mounted totube) Rotor and stator 3D diagram 14
- 18. Advantages 18 Inexpensive (road) Fast (air) Environmentally friendly (rail/road via electriccars) Sustainable (uses solar energy) Runs through the median of existing highway
- 19. Limitations 19 A number of economists and transportation experts have expressed the belief that the US$6 billion price tag dramatically understates the cost of designing, developing, constructing and testing an all-new form of transportation.
- 20. THANKYOU 20