I need these answers double check Still not passing with su.pdf
- 1. I need these answers double check. Still not passing with suggested answers Which of the following commands will provide a listing of possible keywords that start with the letter "I"? ?i i? i ? show i Which of the following connectors is not used for serial connections on the switch? RJ11 RJ45 USB-A 9 pin D Which of the following is not a customer replaceable part? Power Supplies Backplanes Expansion Modules Fans Do rack ears come pre-installed on the switch? Yes No What does this command do in OS10? show diff candidate-configuration running-configuration shows the difference between uncommitted and committed command shows the difference between running-configuration and startup-configuration shows the difference between uncommitted and startup-configuration invalid command Which file is used when the switch boots? running-configuration startup-configuration last-configuration config-bak How many upgrades do you need to perform on a three unit stack? 1 2 3 4 What type of Rack installation options are available? (Select all that apply): Bracket or Ears Rapid Rails Chassis Installation Rack Shelf The best practice is to make sure the replacement switch in a stack is the same version as the existing stack True False Which of the following is NOT a cabling best practice? Cables should not obstruct airflow Cables should be clearly labeled Use an extra 6 to 10 feet of cable to make moving cables easier Alleviate stress on the connectors by leaving a little stack on the cable Install all the power supplies and optional modules into the chassis before mounting the chassis to the rack. True False
- 2. What does the following command do?console(config)#enable password DellNetwork Enables the password function Changes the enable password to "DellNetwork" This will generate a error code will prompt you to enter an enable password Use the show inventory command to determine the fan direction. True False When setting the ip address to the switch the following command is used: ip address 192.16.0.21 /24. What does the /24 specify? 24 bits are used for network specification 24 bits are used for host specification 24 bits are used for this IP Address 24 bits identify how long the hold timer is