Introducing the FSP 3000 Access Link Monitoring Solution
1 like3,341 views
The document discusses the importance of real-time monitoring for access links and dark fiber services, introducing the FSP 3000 Access Link Monitoring (ALM) product for fault detection and localization. It highlights how ALM can reduce operational costs, enhance customer loyalty, and support the growing demand for fiber services. The solution aims to improve service efficiency and revenue potential for dark fiber providers.
Introducing the FSP 3000 Access Link Monitoring Solution
- 1. Access Link Monitoring Technical Marketing December 9, 2014
- 2. Avoidable Costs of Unmonitored Access Links Typical Dark Fiber SLA • End-Customer needs to report failure • Fiber supplier has to respond within x hours • Maintenance might create service disruption Cost & Lost Revenue • Extended MTTR; lost revenue due to unfavorable SLAs • False alarms trigger truck rolls; denser service network • Need for manual, service-affecting testing; lost revenue from unavailability Not knowing, means suffering There is a solution to it! Operators can grow business and improve client loyalty © 2014 ADVA Optical Networking. All rights reserved. 2 Confidential.
- 3. FSP 3000 ALM Key Applications ALM Colocation Managed Dark Fiber • Immediate fault notification • Real-time root cause analysis • Superior SLA due to faster repair cycles Bandwidth Services w/o Electrical Termination • NT-less hand-over of high capacity links • Special interfaces such as CPRI • Operational/administrative boundaries Remote Site ALM Remote Site Colocation © 2014 ADVA Optical Networking. All rights reserved. 3 Confidential.
- 4. FSP 3000 ALM • FSP 3000 Access Link Monitoring (ALM) is a new product that enables real-time monitoring, fault detection and fault localization for access and dark-fiber links • ALM continuously monitors multiple fibers using optical test signals in combination with passive optical demarcation • ALM is independent of data rates, data formats and protocols • ALM requires following equipment deployment • One Processor Module for multiple fibers in CO/head-end • One passive coupler per access fiber in CO/head-end • One passive optical reflector per access fiber at CPE/far-end © 2014 ADVA Optical Networking. All rights reserved. 4 Confidential.
- 5. ALM Setup ALM Setup Details Web-Session ALM Probe 1650nm © 2014 ADVA Optical Networking. All rights reserved. 5 Confidential. Head End Device CO Remote Far Reflect End Device CPE Coupler In/out SNMP ALM Monitor Unit ALM WDM Coupler ALM Demarcation Reflector Customer traffic 1310/1550/CWDM/DWDM
- 6. Access Link Monitoring Summary FSP 3000 ALM • Operates access links in a more cost efficient way • Allows dark fiber providers to create more revenue • Meets demand of rapidly growing fiber/wavelength services market © 2014 ADVA Optical Networking. All rights reserved. 6 Confidential.
- 7. Thank You ukohn@advaoptical.com IMPORTANT NOTICE The content of this presentation is strictly confidential. ADVA Optical Networking is the exclusive owner or licensee of the content, material, and information in this presentation. Any reproduction, publication or reprint, in whole or in part, is strictly prohibited. The information in this presentation may not be accurate, complete or up to date, and is provided without warranties or representations of any kind, either express or implied. ADVA Optical Networking shall not be responsible for and disclaims any liability for any loss or damages, including without limitation, direct, indirect, incidental, consequential and special damages, alleged to have been caused by or in connection with using and/or relying on the information contained in this presentation. Copyright © for the entire content of this presentation: ADVA Optical Networking.