Introduction to Discrete Probabilities with Scilab - Michaël Baudin, Consortium Scilab - DIGITEO, 2010

INTRODUCTION TO
DISCRETE PROBABILITIES WITH SCILAB

4 Acknowledgments 35
5 References and notes 35
Bibliography 35
Index 36
1 Discrete random variables
In this section, we present discrete random variables. The first section presents general definition
for sets, including union, intersection. Then we present the definition of the discrete distribution
function and the probability of an event. In the third section, we give properties of probabilities,
such as, for example, the probability of the union of two disjoints events. The fourth section is
devoted to the very common discrete uniform distribution function. Then we present the definition
of conditional probability. This leads to Bayes formula which allows to compute the posterior
1.1 Sets
A set is a collection of elements. In this document, we consider sets of elements in a fixed non
empty set Ω, to be called a space.
Assume that A is a set of elements. If x is a point in that set, we note x ∈ A. If there is no
point in A, we write A = ∅. If the number of elements in A is finite, let us denote by #(A) the
number of elements in the set A. If the number of elements in A is infinite, the cardinality cannot
be computed (for example A = N).
The set Ac
is the set of all points in Ω which are not in A:
Ac
= {x ∈ Ω / x /∈ A} . (1)
The set Ac
is called the complementary set of A.
The set B is a subset of A if any point in B is also in A and we can write A ⊂ B. The two
sets A and B are equal if A ⊂ B and B ⊂ A. The difference set A − B is the set of all points of
A which are not in B:
A − B = {x ∈ A / x /∈ B} . (2)
The intersection A ∩ B of two sets A and B is the set of points common to A and B:
A ∩ B = {x ∈ A and x ∈ B} . (3)
The union A ∪ B of two sets A and B is the set of points which belong to at least one of the sets
A or B:
A ∪ B = {x ∈ A or x ∈ B} . (4)
The operations that we defined are presented in figure 1. These figures are often referred to
as Venn’s diagrams.
2

Ω
A B
Ω
A B
Ω
A
c
Ω
A B
A-B
Figure 1: Operations on sets – Upper left, union: A ∪ B, Upper right, intersection: A ∩ B, Lower
left, complement: Ac
, Lower right, diﬀerence: A − B
Two sets A and B are disjoints, or mutually exclusive if their intersection is empty, i.e. A∩B =
∅.
In the following, we will use the fact that we can always decompose the union of two sets as
the union of three disjoints subsets. Indeed, assume that A, B ⊂ Ω. We have
A ∪ B = (A − B) ∪ (A ∩ B) ∪ (B − A), (5)
where the sets A − B, A ∩ B and B − A are disjoints. This decomposition will be used several
times in this chapter.
The cross product of two sets is the set
A × B = {(x, y) /x ∈ A, y ∈ B} . (6)
Assume that n is a positive integer. The power set An
is the set
An
= {(x1, . . . , xn) /x1, ..., xn ∈ A} . (7)
Example (Die with 6 faces) Assume that a 6-face die is rolled once. The sample space for this
experiment is
Ω = {1, 2, 3, 4, 5, 6} . (8)
The set of even numbers is A = {2, 4, 6} and the set of odd numbers is B = {1, 3, 5}. Their
intersection is empty, i.e. A ∩ B = ∅ which proves that A and B are disjoints. Since their union
is the whole sample space, i.e. A ∪ B = Ω, these two sets are mutually complement, i.e. Ac
= B
and Bc
= A.
3

1.2 Distribution function and probability
A random event is an event which has a chance of happening, and the probability is a numerical
measure of that chance. What exactly is random is quite difficult to define. In this section, we
define the probability associated with a distribution function, a concept that can be defined very
precisely.
Assume that Ω is a set, called the sample space. In this document, we will consider the case
where the sample space is finite, i.e. the number of elements in Ω is finite. Assume that we are
performing random trials, so that each trial is associated to one outcome x ∈ Ω. Each subset A
of the sample space Ω is called an event. We say that event A ∩ B occurs if both the events A
and B occur. We say that event A ∪ B occurs if the event A or the event B occurs.
We will first define a distribution function and then derive the probability from there. The
example of a 6-faces die will serve as an example for these definitions.
Definition 1.1. (Distribution) A distribution function is a function f : Ω → [0, 1] which satisfies
0 ≤ f(x) ≤ 1, (9)
for all x ∈ Ω and
x∈Ω
f(x) = 1. (10)
Example (Die with 6 faces) Assume that a 6-face die is rolled once. The sample space for this
experiment is
Ω = {1, 2, 3, 4, 5, 6} . (11)
Assume that the die is fair. This means that the probability of each of the six outcomes is the
same, i.e. the distribution function is f(x) = 1/6 for x ∈ Ω, which satisfies the conditions of the
definition 1.1.
Definition 1.2. (Probability) Assume that f is a distribution function on the sample space Ω.
For any event A ⊂ Ω, the probability P of A is
P(A) =
x∈A
f(x). (12)
Example (Die with 6 faces) Assume that a 6-face die is rolled once so that the sample space for
this experiment is Ω = {1, 2, 3, 4, 5, 6}. Assume that the distribution function is f(x) = 1/6 for
x ∈ Ω. The event
A = {2, 4, 6} (13)
corresponds to the statement that the result of the roll is an even number. From the definition
1.2, the probability of the event A is
P(A) = f(2) + f(4) + f(6) (14)
=
1
6
+
1
6
+
1
6
=
1
2
. (15)
4

1.3 Properties of discrete probabilities
In this section, we present the properties that the probability P(A) satisfies. We also derive some
results for the probabilities of other events, such as unions of disjoints events.
The following theorem gives some elementary properties satisfied by a probability P.
Proposition 1.3. (Probability) Assume that Ω is a sample space and that f is a distribution
function on Ω. Assume that P is the probability associated with f. The probability of the event
Ω is one, i.e.
P(Ω) = 1. (16)
The probability of the empty set is zero, i.e.
P(∅) = 0. (17)
Assume that A and B are two subsets of Ω. If A ⊂ B, then
P(A) ≤ P(B). (18)
For any event A ⊂ Ω, we have
0 ≤ P(A) ≤ 1. (19)
Proof. The equality 16 derives directly from the definition 10 of a distribution function, i.e.
P(Ω) = x∈Ω f(x) = 1. The equality 17 derives directly from 10.
Assume that A and B are two subsets of Ω so that A ⊂ B. Since a probability is the sum of
positive terms, we have
P(A) =
x∈A
f(x) ≤
x∈B
f(x) = P(B) (20)
which proves the inequality 18.
The inequalities 19 derive directly from the definition of a probability 12. First, the probability
P is positive since 9 states that f is positive. Second, the probability P of an event A is lower
than 1, since P(A) = x∈A f(x) ≤ x∈Ω f(x) = P(Ω) = 1, which concludes the proof.
Proposition 1.4. (Probability of two disjoint subsets) Assume that Ω is a sample space and that
f is a distribution function on Ω. Assume that P is the probability associated with f.
Let A and B be two disjoints subsets of Ω, then
P(A ∪ B) = P(A) + P(B). (21)
The figure 2 presents the situation of two disjoints sets A and B. Since the two sets have no
intersection, it suffices to add the probabilities associated with each event.
Proof. Assume that A and B be two disjoints subsets of Ω. We can decompose A∪B as A∪B =
(A − B) ∪ (A ∩ B) ∪ (B − A), so that
P(A ∪ B) =
x∈A∪B
f(x) (22)
=
x∈A−B
f(x) +
x∈A∩B
f(x) +
x∈B−A
f(x). (23)
5

Ω
A B
Figure 2: Two disjoint sets.
But A and B are disjoints, so that A − B = A, A ∩ B = ∅ and B − A = B. Therefore,
P(A ∪ B) =
x∈A
f(x) +
x∈B
f(x) (24)
= P(A) + P(B), (25)
which concludes the proof.
Notice that the equality 21 can be generalized immediately to a sequence of disjoints events.
Proposition 1.5. (Probability of disjoints subsets) Assume that Ω is a sample space and that f
is a distribution function on Ω. Assume that P is the probability associated with f.
For any disjoints events A1, A2, . . . , Ak ⊂ Ω with k ≥ 0, we have
P (A1 ∪ A2 ∪ . . . ∪ Ak) = P(A1) + P(A2) + . . . + P(Ak). (26)
Proof. For example, we can use the proposition 1.4 to state the proof by induction on the number
of events.
this experiment is Ω = {1, 2, 3, 4, 5, 6}. Assume that the distribution function is f(x) = 1/6 for
x ∈ Ω. The event A = {1, 2, 3} corresponds to the numbers lower or equal to 3. The probability
of this event is P(A) = 1
2
. The event B = {5, 6} corresponds to the numbers greater than 5. The
probability of this event is P(B) = 1
3
. The two events are disjoints, so that the proposition 1.5
can be applied which proves that P(A ∪ B) = 5
6
.
Proposition 1.6. (Probability of the complementary event) Assume that Ω is a sample space
and that f is a distribution function on Ω. Assume that P is the probability associated with f.
For all subset A of Ω,
P(A) + P(Ac
) = 1. (27)
Proof. We have Ω = A ∪ Ac
, where the sets A and Ac
are disjoints. Therefore, from proposition
1.4, we have
P(Ω) = P(A) + P(Ac
), (28)
where P(Ω) = 1, which concludes the proof.
6

Ω
A B
Figure 3: Two sets with a non empty intersection.
Example (Die with 6 faces) Assume that a 6-face die is rolled once so that the sample space
for this experiment is Ω = {1, 2, 3, 4, 5, 6}. Assume that the distribution function is f(x) = 1/6
for x ∈ Ω. The event A = {2, 4, 6} corresponds to the statement that the result of the roll is an
even number. The probability of this event is P(A) = 1
2
. The complementary event is the event
of an odd number, i.e. Ac
= {1, 3, 5}. By proposition 1.6, the probability of an odd number is
P(Ac
) = 1 − P(A) = 1 − 1
2
= 1
2
.
The following equality gives the relationship between the probability of the union of two events
in terms of the individual probabilities and the probability of the intersection.
Proposition 1.7. (Probability of the union) Assume that Ω is a sample space and that f is a
distribution function on Ω. Assume that A and B are two subsets of Ω, not necessarily disjoints.
We have:
P(A ∪ B) = P(A) + P(B) − P(A ∩ B). (29)
The ﬁgure 3 presents the situation where two sets A and B have a non empty intersection.
When we add the probabilities of the two events A and B, the intersection is added twice. This
is why it must be removed by subtraction.
Proof. Assume that A and B are two subsets of Ω. The proof is based on the analysis of Venn’s
diagram presented in ﬁgure 1. The idea of the proof is to compute the probability P(A ∪ B), by
making disjoints sets on which the equality 21 can be applied. We can decompose the union of
the two set A and B as the union of disjoints sets:
A ∪ B = (A − B) ∪ (A ∩ B) ∪ (B − A). (30)
The equality 21 leads to
P(A ∪ B) = P(A − B) + P(A ∩ B) + P(B − A). (31)
The next part of the proof is based on the computation of P(A − B) and P(B − A). We can
decompose the set A as the union of disjoints sets
A = (A − B) ∪ (A ∩ B), (32)
7

which leads to P(A) = P(A − B) + P(A ∩ B), which can be written as
P(A − B) = P(A) − P(A ∩ B). (33)
Similarly, we can prove that
P(B − A) = P(B) − P(B ∩ A). (34)
By plugging the two equalities 33 and 34 into 31, we find
P(A ∪ B) = P(A) − P(A ∩ B) + P(A ∩ B) + P(B) − P(B ∩ A), (35)
which simplifies into
P(A ∪ B) = P(A) + P(B) − P(B ∩ A), (36)
and concludes the proof.
Example (Disease) Assume that the probability of infections can be bacterial (B), viral (V) or
both (B ∩ V ). This implies that B ∪ V = Ω but the two events are not disjoints, i.e. B ∩ V = ∅.
Assume that P(B) = 0.7 and P(V ) = 0.4. What is the probability of having both types of
infections ? The probability of having both infections is P(B ∩V ). From proposition 1.7, we have
P(B ∪ V ) = P(B) + P(V ) − P(B ∩ V ), which leads to P(B ∩ V ) = P(B) + P(V ) − P(B ∪ V ).
We finally get P(B ∩ V ) = 0.1. This example is presented in [10].
1.4 Uniform distribution
In this section, we describe the particular situation where the distribution function is uniform.
Definition 1.8. (Uniform distribution) Assume that Ω is a finite sample space. The uniform
distribution function is
f(x) =
1
#(Ω)
, (37)
for all x ∈ Ω.
Proposition 1.9. (Probability with uniform distribution) Assume that Ω is a finite sample space
and that f is a uniform distribution function. Then the probability of the event A ⊂ Ω is
P(A) =
#(A)
#(Ω)
. (38)
Proof. When the distribution function is uniform, the definition 1.2 implies that
P(A) =
x∈A
f(x) =
x∈A
1
#(Ω)
(39)
=
#(A)
#(Ω)
, (40)
8

Ω
A
Figure 4: A set A, subset of the sample space Ω.
this experiment is Ω = {1, 2, 3, 4, 5, 6}. In the previous analysis of this example, we have assumed
that the distribution function is f(x) = 1/6 for x ∈ Ω. This is consistent with definition 1.8,
since #(Ω) = 6. Such a die is a fair die, meaning that all faces have the same probability. The
event A = {2, 4, 6} corresponds to the statement that the result of the roll is an even number.
The number of outcomes in this event is #(A) = 3. From proposition 1.9, the probability of this
event is P(A) = 1
2
.
1.5 Conditional probability
In this section, we define the conditional distribution function and the conditional probability.
We analyze this definition in the particular situation of the uniform distribution.
In some situations, we want to consider the probability of an event A given that an event B
has occurred. In this case, we consider the set B as a new sample space, and update the definition
of the distribution function accordingly.
Definition 1.10. (Conditional distribution function) Assume that Ω is a sample space and that
f is a distribution function on Ω. Assume that A is a subset of Ω with P(A) = x∈A f(x) > 0.
The function f(x|A) defined by
f(x|A) =
f(x)
x∈A f(x)
, if x ∈ A,
0, if x /∈ A,
(41)
is the conditional distribution function of x given A.
The figure 4 presents the situation where an event A is considered for a conditionnal distribu-
tion. The distribution function f(x) is with respect to the sample space Ω while the conditionnal
distribution function f(x|A) is with respect to the set A.
Proof. What is to be proved in this proposition is that the function f(x|A) is a distribution
function. Let us prove that the function f(x|A) satisfies the equality
x∈Ω
f(x|A) = 1. (42)
9

Ω
A B
A⋂B
Figure 5: The conditionnal probability P(A|B) measure the probability of the set A ∩ B with
respect to the set B.
Indeed, we have
x∈Ω
f(x|A) =
x∈A
f(x|A) +
x/∈A
f(x|A) (43)
=
x∈A
f(x)
x∈A f(x)
(44)
= 1, (45)
(46)
This leads us to the following definition of the conditional probability of an event A given an
event B.
Proposition 1.11. (Conditional probability) Assume that Ω is a finite sample space and A and
B are two subsets of Ω. Assume that P(B) > 0. The conditional probability of the event A given
the event B is
P(A|B) =
P(A ∩ B)
P(B)
. (47)
The figure 5 presents the situation where we consider the event A|B. The probability P(A)
is with respect to Ω while the probability P(A|B) is with respect to B.
Proof. Assume that A and B are subsets of the sample space Ω. The conditional distribution
function f(x|B) allows us to compute the probability of the event A given the event B. Indeed,
we have
P(A|B) =
x∈A
f(x|B) (48)
=
x∈A∩B
f(x|B) (49)
10

since f(x|B) = 0 if x /∈ B. Hence,
P(A|B) =
x∈A∩B
f(x)
x∈B f(x)
(50)
= x∈A∩B f(x)
x∈B f(x)
(51)
=
P(A ∩ B)
P(B)
. (52)
The previous equality is well defined since P(B) > 0.
This definition can be analyzed in the particular case where the distribution function is uni-
form. Assume that #(Ω) is the size of the sample space and #(A) (resp. #(B) and #(A ∩ B))
is the number of elements of A (resp. of B and A ∩ B). The conditional probability P(A|B) is
P(A|B) =
#(A ∩ B)
#(B)
. (53)
We notice that
#(B)
#(Ω)
#(A ∩ B)
#(B)
=
#(A ∩ B)
#(Ω)
, (54)
for all A, B ⊂ Ω. This leads to the equality
P(B)P(A|B) = P(A ∩ B), (55)
for all A, B ⊂ Ω. The previous equation could have been directly found based on the equation
47.
The following example is given in [4], in section 4.1, ”Discrete conditional Probability”.
Example Grinstead and Snell [4] present a table which presents the number of survivors at single
years of age. This table gathers data compiled in the USA in 1990. The first line counts 100,000
born alive persons, with decreasing values when the age is increasing. This table allows to see
that 89.8 % in a population of 100,000 females can expect to live to age 60, while 57.0 % can
expect to live to age 80. Given that a women is 60, what is the probability that she lives to age
80 ?
Let us denote by A = {a ≥ 60} the event that a woman lives to age 60, and let us denote by
B = {a ≥ 80} the event that a woman lives to age 80. We want to compute the conditionnal
probability P({a ≥ 80}|{a ≥ 60}). By the proposition 1.11, we have
P({a ≥ 80}|{a ≥ 60}) =
P({a ≥ 60} ∩ {a ≥ 80})
P({a ≥ 60})
(56)
=
P({a ≥ 80})
P({a ≥ 60})
(57)
=
0.570
0.898
(58)
= 0.635, (59)
with 3 significant digits. In other words, a women who is already 60, has 63.5 % of chance to live
to 80.
11

Figure 6: Tree diagram - The task is made with 3 steps. There are 2 choices for the step #1,
3 choices for step #2 and 2 choices for step #3. The total number of ways to perform the full
sequence of steps is n = 2 · 3 · 2 = 12.
2 Combinatorics
In this section, we present several tools which allow to compute probabilities of discrete events.
One powerful analysis tool is the tree diagram, which is presented in the first part of this section.
Then, we detail permutations and combinations numbers, which allow to solve many probability
problems.
2.1 Tree diagrams
In this section, we present the general method which allows to count the total number of ways
that a task can be performed. We illustrate that method with tree diagrams.
Assume that a task is carried out in a sequence of n steps. The first step can be performed by
making one choice among m1 possible choices. Similarly, there are m2 possible ways to perform
the second step, and so forth. The total number of ways to perform the complete sequence can
be performed in n = m1m2 . . . mn different ways.
To illustrate the sequence of steps, the associated tree can be drawn. An example of such
a tree diagram is given in the figure 6. Each node in the tree corresponds to one step in the
sequence. The number of children of a parent node is equal to the number of possible choices for
the step. At the bottom of the tree, there are N leafs, where each path, i.e. each sequence of
nodes from the root to the leaf, corresponds to a particular sequence of choices.
We can think of the tree as representing a random experiment, where the final state is the
outcome of the experiment. In this context, each choice is performed at random, depending on
the probability associated with each branch. We will review tree diagrams throughout this section
and especially in the section devoted to Bernoulli trials.
2.2 Permutations
In this section, we present permutations, which are ordered subsets of a given set.
Definition 2.1. ( Permutation) Assume that A is a finite set. A permutation of A is a one-to-one
mapping of A onto itself.
12

1
2
3
2
3
3
1
3
1
2
2
3
2
2
1
Figure 7: Tree diagram for the computation of permutations of the set A = {1, 2, 3}.
Without loss of generality, we can assume that the finite set A can be ordered and numbered
from 1 to n = #(A), so that we can write A = {1, 2, . . . , n}. To define a particular permutation,
one can write a matrix with 2 rows and n columns which represents the mapping. One example
of a permutation on the set A = {a1, a2, a3, a4} is
σ =
1 2 3 4
2 1 4 3
, (60)
which signifies that the mapping is:
• a1 → a2,
• a2 → a1,
• a3 → a4,
• a3 → a4.
Since the first row is always the same, there is no additional information provided by this row.
This is why the permutation can be written by uniquely defining the second row. This way, the
previous mapping can be written as
σ = 2 1 4 3 . (61)
We can try to count the number of possible permutations of a given set A with n elements.
The tree diagram associated with the computation of the number of permutations for n = 3
is presented in figure 7. In the first step, we decide which number to place at index 1. For this
index, we have 3 possibilities, that is, the numbers 1, 2 and 3. In the second step, we decide which
number to place at index 2. At this index, we have 2 possibilities left, where the exact numbers
depend on the branch. In the third step, we decide which number to place at index 3. At this
last index, we only have one number left.
This leads to the following proposition, which defines the factorial function.
Proposition 2.2. ( Factorial) The number of permutations of a set A of n elements is the factorial
of n defined by
n! = n · (n − 1) . . . 2 · 1. (62)
13

Proof. #1 Let us pick an element to place at index 1. There are n elements in the set, leading
to n possible choices. For the element at index 2, there are n − 1 elements left in the set. For the
element at index n, there is only 1 element left. The total number of permutations is therefore
n · (n − 1) . . . 2 · 1, which concludes the proof.
Proof. #2 The element at index 1 can be located at indexes 1, 2, . . . , n so that there are n ways
to set the element #1. Once the element at index 1 is placed, there are n − 1 ways to set the
element at index 2. The last element at index n can only be set at the remaining index. The
total number of permutations is therefore n · (n − 1) . . . 2 · 1, which concludes the proof.
Example Let us compute the number of permutations of the set A = {1, 2, 3}. By the equation
62, we have 6! = 3 · 2 · 1 = 6 permutations of the set A. These permutations are:
(1 2 3)
(1 3 2)
(2 1 3)
(2 3 1)
(3 1 2)
(3 2 1)
(63)
The previous permutations can also be directly read from the tree diagram 7, from the root of
the tree to each of the 6 leafs.
In some situations, all the elements in the set A are not involved in the permutation. Assume
that j is a positive integer, so that 0 ≤ j ≤ n. A j-permutation is a permutation of a subset of
j elements in A. The general counting method used for the previous proposition allows to count
the total number of j-permutations of a given set A.
Proposition 2.3. ( Permutation number) Assume that j is a positive integer. The number of
j-permutations of a set A of n elements is
(n)j = n · (n − 1) . . . (n − j + 1). (64)
Proof. The element at index 1 can be located at indexes 1, 2, . . . , n so that there are n ways to
set the element at index 1. Once element at index 1 is placed, there are n − 1 ways to set the
element at index 2. The element at index j can only be set at the remaining n − j + 1 indexes.
The total number of j-permutations is therefore n · (n − 1) . . . (n − j + 1), which concludes the
proof.
Example Let us compute the number of 2-permutations of the set A = {1, 2, 3, 4}. By the
equation 64, we have (4)2 = 4 · 3 = 12 permutations of the set A. These permutations are:
(1 2)
(1 3)
(1 4)
(2 1)
(2 3)
(2 4)
(3 1)
(3 2)
(3 4)
(4 1)
(4 2)
(4 3)
(65)
We can check that the number of 2-permutations in a set of 4 elements is (4)2 = 12 which is
stricly lower that the number of permutations 4! = 24.
14

2.3 The gamma function
In this section, we present the gamma function which is closely related to the factorial function.
The gamma function was first introduced by the Swiss mathematician Leonard Euler in his goal
to generalize the factorial to non integer values[13]. Efficient implementations of the factorial
function are based on the gamma function and this is why this functions will be analyzed in
detail. The practical computation of the factorial function will be analyzed in the next section.
Definition 2.4. ( Gamma function) Let x be a real with x > 0. The gamma function is defined
by
Γ(x) =
1
0
(− log(t))x−1
dt. (66)
The previous definition is not the usual form of the gamma function, but the following propo-
sition allows to get it.
Proposition 2.5. ( Gamma function) Let x be a real with x > 0. The gamma function satisfies
Γ(x) =
∞
0
tx−1
e−t
dt. (67)
Proof. Let us consider the change of variable u = − log(t). Therefore, t = e−u
, which leads, by
differenciation, to dt = −e−u
du. We get (− log(t))x−1
dt = −ux−1
e−u
du. Moreover, if t = 0, then
u = ∞ and if t = 1, then u = 0. This leads to
Γ(x) = −
0
∞
ux−1
e−u
du. (68)
For any continuously differentiable function f and any real numbers a and b.
b
a
f(x)dx = −
a
b
f(x)dx. (69)
We reverse the bounds of the integral in the equality 68 and get the result.
The gamma function satisfies
Γ(1) =
∞
0
e−t
dt = −e−t ∞
0
= (0 + e0
) = 1. (70)
The following proposition makes the link between the gamma and the factorial functions.
Proposition 2.6. ( Gamma and factorial) Let x be a real with x > 0. The gamma function
satisfies
Γ(x + 1) = xΓ(x) (71)
and
Γ(n + 1) = n! (72)
for any integer n ≥ 0.
15

Proof. Let us prove the equality 71. We want to compute
Γ(x + 1) =
∞
0
tx
e−t
dt. (73)
The proof is based on the integration by parts formula. For any continuously differentiable
functions f and g and any real numbers a and b, we have
b
a
f(t)g (t)dt = [f(t)g(t)]b
a −
b
a
f(t) g(t)dt. (74)
Let us define f(t) = tx
and g (t) = e−t
. We have f (t) = xtx−1
and g(t) = −e−t
. By the
integration by parts formula 74, the equation 73 becomes
Γ(x + 1) = −tx
e−t ∞
0
+
∞
0
xtx−1
e−t
dt. (75)
Let us introduce the function h(t) = −tx
e−t
. We have h(0) = 0 and limt→∞ h(t) = 0, for any
x > 0. Hence,
Γ(x + 1) =
∞
0
xtx−1
e−t
dt, (76)
which proves the equality 71.
The equality 72 can be proved by induction on n. First, we already noticed that Γ(1) = 1. If
we define 0! = 1, we have Γ(1) = 0!, which proves the equality 72 for n = 0. Then, assume that
the equality holds for n and let us prove that Γ(n + 2) = (n + 1)!. By the equality 71, we have
Γ(n + 2) = (n + 1)Γ(n + 1) = (n + 1)n! = (n + 1)!, which concludes the proof.
The gamma function is not the only function f which satisfies f(n) = n!. But the Bohr-
Mollerup theorem prooves that the gamma function is the unique function f which satisfies the
equalities f(1) = 1 and f(x + 1) = xf(x), and such that log(f(x)) is convex [2].
It is possible to extend this function to negative values by inverting the equation 71, which
implies
Γ(x) =
Γ(x + 1)
x
, (77)
for x ∈] − 1, 0[. This allows to compute, for example Γ(−1/2) = −2Γ(1/2). By induction, we can
also compute the value of the gamma function for x ∈] − 2, −1[. Indeed, the equation 77 implies
Γ(x + 1) =
Γ(x + 2)
x + 1
, (78)
which leads to
Γ(x) =
Γ(x + 2)
x(x + 1)
. (79)
By induction of the intervals ]−n−1, −n[ with n a positive integer, this formula allows to compute
values of the gamma function for all x ≤ 0, except the negative integers 0, −1, −2, . . .. This leads
to the following proposition.
16

Proposition 2.7. ( Gamma function for negative arguments) For any non zero integer n and
any real x such that x + n > 0,
Γ(x) =
Γ(x + n)
x(x + 1) . . . (x + n − 1)
. (80)
Proof. The proof is by induction on n. The equation 77 prooves that the equality is true for
n = 1. Assume that the equality 80 is true for n et let us proove that it also holds for n + 1. By
the equation 77 applied to x + n, we have
Γ(x + n) =
Γ(x + n + 1)
x + n
. (81)
Therefore, we have
Γ(x) =
Γ(x + n + 1)
x(x + 1) . . . (x + n − 1)(x + n)
(82)
which proves that the statement holds for n + 1 and concludes the proof.
The gamma function is singular for negative integers values of its argument, as stated in the
following proposition.
Proposition 2.8. ( Gamma function for integer negative arguments) For any non negative integer
n,
Γ(−n + h) ∼
(−1)n
n!h
, (83)
when h is small.
Proof. Consider the equation 80 with x = −n + h. We have
Γ(−n + h) =
Γ(h)
(h − n)(h − n + 1)) . . . (h + 1)
. (84)
But Γ(h) = Γ(h+1)
h
, which leads to
Γ(−n + h) =
Γ(h + 1)
(h − n)(h − n + 1)) . . . (h + 1)h
. (85)
When h is small, the expression Γ(h+1) converges to Γ(1) = 1. On the other hand, the expression
(h − n)(h − n + 1)) . . . (h + 1)h converges to (−n)(−n + 1) . . . (1)h, which leads to the the term
(−1)n
and concludes the proof.
We have reviewed the main properties of the gamma function. In practical situations, we use
the gamma function in order to compute the factorial number, as we are going to see in the next
sections. The main advantage of the gamma function over the factorial is that it avoids to form
the product n! = n · (n − 1) . . . 1, which allows to save a signiﬁcant amount of CPU time and
computer memory.
17

factorial returns n!
gamma returns Γ(x)
gammaln returns ln(Γ(x))
Figure 8: Scilab commands for permutations.
2.4 Overview of functions in Scilab
The figure 8 presents the functions provided by Scilab to compute permutations.
Notice that there is no function to compute the number of permutations (n)j = n · (n −
1) . . . (n − j + 1). This is why, in the next sections, we provide a Scilab function to compute (n)j.
In the next sections, we analyze each function in Scilab. We especially consider their numer-
ical behavior and provide accurate and efficient Scilab functions to manage permutations. We
emphasize the need for accuracy and robustness. For this purpose, we use the logarithmic scale to
provide intermediate results which stays in the limited bounds of double precision floating point
arithmetic.
2.5 The gamma function in Scilab
The gamma function allows to compute Γ(x) for real input argument. The mathematical function
Γ(x) can be extended to complex arguments, but this has not be implemented in Scilab.
The following script allows to plot the gamma function for x ∈ [−4, 4].
x = linspace ( -4 , 4 , 1001 );
y = gamma ( x );
plot ( x , y );
h = gcf ();
h.children.data_bounds = [
- 4. -6
4. 6
];
The previous script produces the figure 9.
The following session presents various values of the gamma function.
-->x = [-2 -1 -0 +0 1 2 3 4 5 6]’;
-->[x gamma(x)]
ans =
- 2. Nan
- 1. Nan
0. -Inf
0. Inf
1. 1.
2. 1.
3. 2.
4. 6.
5. 24.
6. 120.
Notice that the two floating point signed zeros +0 and -0 are associated with the function
values −∞ and +∞. This is consistent with the value of the limit of the function from either
sides of the singular point. This contrasts with the value of the gamma function on negative
18

-6
-4
-2
0
2
4
6
-4 -3 -2 -1 0 1 2 3 4
Figure 9: The gamma function.
integer points, where the function value is %nan. This is consistent with the fact that, on this
singular points, the function is equal to −∞ on one side and +∞ on the other side. Therefore,
since the argument x has one single floating point representation when it is a negative nonzero
integer, the only solution consistent with the IEEE754 standard is to set the result to %nan.
Notice that we used 1001 points to plot the gamma function. This allows to get points
exactly located at the singular points. These values are ignored by the plot function and makes
a nice plot. Indeed, if 1000 points are used instead, vertical lines corresponding to the y-value
immediately at the left and the right of the singularity would be displayed.
2.6 The factorial and log-factorial functions
In the following script, we plot the factorial function for values of n from 1 to 10.
f = factorial (1:10)
plot ( 1:10 , f , "b-o" )
The result is presented in figure 10. We see that the growth rate of the factorial function is large.
The largest values of n so that n! is representable as a double precision floating point number
is n = 170. In the following session, we check that 171! is not representable as a Scilab double.
-->factorial (170)
ans =
7.257+306
-->factorial (171)
ans =
Inf
The factorial function is implied in many probability computations, sometimes as an interme-
diate result. Since it grows so fast, we might be interested in computing its order of magnitude
instead of its value. Let us introduce the function fln as the logarithm of the factorial number n!:
fln(n) = ln(n!). (86)
19

0.0e+000
5.0e+005
1.0e+006
1.5e+006
2.0e+006
2.5e+006
3.0e+006
3.5e+006
4.0e+006
1 2 3 4 5 6 7 8 9 10
Figure 10: The factorial function.
Notice that we used the base-e logarithm function ln, that is, the reciprocal of the exponential
function.
The factorial number n! grows exponentially, but its logarithm grows much more slowly. In
the ﬁgure 11, we plot the logarithm of n! in the interval [0, 170]. We see that the y coordinate
varies only from 0 up to 800. Hence, there are a large number of integers n for which n! may be
not representable as a double but fln(n) is still representable as a double.
2.7 Computing factorial and log-factorial with Scilab
In this section, we present how to compute the factorial function in Scilab. We focus in this
section on accuracy and eﬃciency.
The factorial function returns the factorial number associated with the given n. It has the
following syntax:
f = factorial ( n )
In the following session, we compute n! for several values of n, from 1 to 7.
-->n = (0:7) ’;
-->[n factorial(n)]
ans =
0. 1.
1. 1.
2. 2.
3. 6.
4. 24.
5. 120.
6. 720.
7. 5040.
The implementation of the factorial function in Scilab allows to take both matrix and
hypermatrices input arguments. In order to be fast, it uses vectorization. The following fac-
20

160100 18040
n
14060 120
log(n!)
200
800
700
600
500
400
300
200
100
0
80
Logarithm of n!
Figure 11: Logarithm of the factorial number.
torialScilab function represents the computationnal core of the actual implementation of the
factorial function in Scilab.
function f = factorialScilab ( n )
n(n==0)=1
t = cumprod (1: max(n))
v = t(n(:))
f = matrix(v,size(n))
endfunction
The statement n(n==0)=1 allows to set all zeros of the matrix n to one, so that the next statements
do not have to manage the special case 0! = 1. Then, we use the cumprod function in order to
compute a column vector containing cumulated products, up to the maximum entry of n. The
use of cumprod allows to get all the results in one call, but also produces unnecessary values of
the factorial function. In order to get just what is needed, the statement v = t(n(:)) allows to
extract the required values. Finally, the statement f = matrix(v,size(n)) reshapes the matrix
of values so that the shape of the output argument is the same as the shape of the input argument.
The main drawback of the factorialScilab function is that it uses more memory than necessary.
It may fail to produce a result when it is given a large input argument.
The following function allows to compute n! based on the prod function, which computes the
product of its input argument.
function f = factorial_naive ( n )
f = prod (1:n)
endfunction
The factorial_naive function has two drawbacks. The ﬁrst one is that it cannot manage matrix
input arguments. Furthermore, it requires more memory than necessary.
In practice, the factorial function can be computed based on the gamma function. The fol-
lowing implementation of the factorial function is based on the equality 72.
function f = myfactorial ( n )
21

if ( ( or (n(:) < 0) ) | ( n(:) <> round (n(:) ) ) ) then
error ("myfactorial: n must all be nonnegative integers");
end
f = gamma ( n + 1 )
endfunction
The myfactorial function also checks that the input argument n is positive. It also checks that
n is an integer by using the condition ( n(:) <> round (n(:) ). Indeed, if the value of n is
diﬀerent from the value of round(n), this means that the input argument n is not an integer.
We now consider the computation of the log-factorial function fln. We can use the gammaln
function which directly provides the correct result.
function flog = factoriallog ( n )
flog = gammaln(n+1);
endfunction
The advantage of this method is that matrix input arguments can be manage by the factoriallog
function.
2.8 Computing permutations and log-permutations with Scilab
There is no Scilab function to compute the number of permutations (n)j = n.(n−1) . . . (n−j+1).
We might be interested in simplifying the expression for the permutation number We have
(n)j = n.(n − 1) . . . (n − j + 1) (87)
=
n.(n − 1). . . . .1
(n − j).(n − j − 1) . . . 1
, (88)
=
n!
(n − j)!
. (89)
This leads to the following function.
function p = permutations_verynaive ( n , j )
p = factorial(n)./ factorial(n-j)
endfunction
In the following session, we see that the previous function works for small values of n and j, but
fails to produce accurate results for large values of n.
-->n = [5 5 5 5 5 5]’;
-->j = [0 1 2 3 4 5]’;
-->[n j permutations_verynaive (n,j)]
ans =
5. 0. 1.
5. 1. 5.
5. 2. 20.
5. 3. 60.
5. 4. 120.
5. 5. 120.
-->permutations_verynaive ( 171 , 171 )
ans =
Inf
This is caused by an overﬂow during the computation of the factorial function.
The following permutations_naive function allows to compute (n)j for positive integer values
of n, j. It is based on the prod function, which computes the product of the given vector.
22

function p = permutations_naive ( n , j )
p = prod ( n-j+1 : n )
endfunction
In the following session, we check the values of the function (n)j for n = 5 and j = 1, 2, . . . , 5.
-->for j = 1:5
--> p = permutations ( 5 , j );
--> mprintf("(%d)_%d = %dn" ,5,j,p);
-->end
(5)_1 = 5
(5)_2 = 20
(5)_3 = 60
(5)_4 = 120
(5)_5 = 120
The permutations_naive function has several drawbacks. First, it requires more memory
than necessary. For example, it may fail to compute (n)n = 1 for values of n larger than 105
.
Furthermore, the function does not manage matrix input arguments. Finally, large values of n
might generate cumulated rounding errors.
In order to accurately compute the permutation number, we may compute its logarithm first.
By the equation 89, we have
ln((n)j) = ln
n!
(n − j)!
(90)
= ln(n!) − ln((n − j)!) (91)
= Γ(n + 1) − Γ(n − j + 1). (92)
The previous equation leads to the definition of the log-permutation function, as defined in the
following function.
function plog = permutationslog ( n , j )
plog = gammaln(n+1)- gammaln(n-j+1);
endfunction
In order to compute the permutation number, we compute the exponential of the expression. This
leads to the following function permutations, where we round the result in order to get integer
results.
function p = permutations ( n , j )
p = exp(gammaln(n+1)- gammaln(n-j+1));
if ( and(round(n)==n) & and(round(j)==j) ) then
p = round ( p )
end
endfunction
The previous function takes matrix input argument and requires the minimum amount of memory.
2.9 Combinations
In this section, we present combinations, which are unordered subsets of a given set.
The number of distinct subsets with j elements which can be chosen from a set A with n
elements is the binomial coefficient and is denoted by
n
j
. The following proposition gives an
explicit formula for the binomial number.
23

Proposition 2.9. ( Binomial) The number of distinct subsets with j elements which can be chosen
from a set A with n elements is the binomial coefficient and is defined by
n
j
=
n.(n − 1) . . . (n − j + 1)
1.2 . . . j
. (93)
The following proof is based on the fact that subsets are unordered, while permutations are
based on the order.
Proof. Assume that the set A has n elements and consider subsets with j > 0 elements. By
proposition 2.3, the number of j-permutations of the set A is (n)j = n.(n − 1) . . . (n − j + 1).
Notice that the order does not matter in creating the subsets, so that the number of subsets is
lower than the number of permutations. This is why each subset is associated with one or more
permutations. By proposition 2.2, there are j! ways to order a set with j elements. Therefore,
the number of subsets with j elements is given by
n
j
= n.(n−1).....(n−j+1)
1.2...j
, which concludes the
proof.
The expression for the binomial coefficient can be simplified if we use the number of j-
permutations and the factorial number, which leads to
n
j
=
(n)j
j!
. (94)
The equality (n)j = n!
(n−j)!
leads to
n
j
=
n!
(n − j)!j!
. (95)
This immediately leads to
n
j
=
n
n − j
. (96)
The following proposition shows a recurrence relation for binomial coefficients.
Proposition 2.10. For integers n > 0 and 0 < j < n, the binomial coefficients satisfy
n
j
=
n − 1
j
+
n − 1
j − 1
. (97)
The proof recurrence relation of the proposition 2.10 is given as an exercise.
2.10 Computing combinations with Scilab
In this section, we show how to compute combinations with Scilab.
There is no Scilab function to compute the binomial number
n
j
. The following Scilab
function performs the computation of the binomial number for positive values of n and j.
24

// combinations --
// Returns the number of combinations of j objects chosen from n objects.
function c = combinations ( n , j )
c = exp(gammaln(n+1)- gammaln(j+1)- gammaln(n-j+1));
// If the input where integers , returns also an integer.
if ( and(round(n)==n) & and(round(j)==j) ) then
b = round ( b )
end
endfunction
In the following session, we compute the value of the binomial coefficients for n = 1, 2, . . . , 5.
The values in this table are known as Pascal’s triangle.
-->for n=0:5
--> for j=0:n
--> c = combinations ( n , j );
--> mprintf("(%d ,%d)=%2d ",n,j,c);
--> end
--> mprintf("n");
-->end
(0 ,0)= 1
(1 ,0)= 1 (1 ,1)= 1
(2 ,0)= 1 (2 ,1)= 2 (2 ,2)= 1
(3 ,0)= 1 (3 ,1)= 3 (3 ,2)= 3 (3 ,3)= 1
(4 ,0)= 1 (4 ,1)= 4 (4 ,2)= 6 (4 ,3)= 4 (4 ,4)= 1
(5 ,0)= 1 (5 ,1)= 5 (5 ,2)=10 (5 ,3)=10 (5 ,4)= 5 (5 ,5)= 1
We now explain why we choose to use the exp and the gammaln to perform our computation
for the combinations function. Indeed, we could have used a more naive method, based on the
prod, as in the following example :
function c = combinations_naive ( n , j )
c = prod ( n : -1 : n-j+1 )/ prod (1:j)
endfunction
For very small integer values of n, the two previous functions perform exactly the same com-
putation. Unfortunately, for even moderate values of n, the naive method fails. In the following
session, we compute the value of
n
j
with n = 10000 and j = 134.
-->combinations ( 10000 , 134 )
ans =
2.050+307
-->combinations_naive ( 10000 , 134 )
ans =
Inf
The reason why the naive computation fails is because the products involved in the interme-
diate variables for the naive method are generating an overflow. This means that the values are
too large for being stored in a double precision floating point variable.
Notice that we use the round in our implementation of the combinations function. This is
because the combinations function manages in fact real double precision floating point input
arguments. Consider the example where n = 4 and j = 1 and let us compute the associated
number of combinations
n
j
. In the following Scilab session, we use the format so that we
display at least 15 significant digits.
25

1 2 3 4 5 6 7 8 9 10 J Q K
1♥ 2♥ 3♥ 4♥ 5♥ 6♥ 7♥ 8♥ 9♥ 10♥ J♥ Q♥ K♥
1♣ 2♣ 3♣ 4♣ 5♣ 6♣ 7♣ 8♣ 9♣ 10♣ J♣ Q♣ K♣
1♠ 2♠ 3♠ 4♠ 5♠ 6♠ 7♠ 8♠ 9♠ 10♠ J♠ Q♠ K♠
Figure 12: Cards of a 52 cards deck - ”J” stands for Jack, ”Q” stands for Queen and ”K” stands
for King
-->format (20);
-->n = 4;
-->j = 1;
-->c = exp(gammaln(n+1)- gammaln(j+1)- gammaln(n-j+1))
c =
3.99999999999999822
We see that there are 15 significant digits, which is the best that can be expected from the exp
and gammaln functions. But the result is not an integer anymore, i.e. it is very close to the integer
4, but not exactly equal to it. This is why in the combinations function, if n and j are both
integers, we round the number c to the nearest integer.
Notice that our implementation of the combinations function uses the function and. This
allows to use arrays of integers as input variables. In the following session, we compute
4
1
,
5
2
and
6
3
in a single call. This is a consequence of the fact that the exp and gammaln both
accept matrices input arguments.
-->combinations ( [4 5 6] , [1 2 3] )
ans =
4. 10. 20.
2.11 The poker game
In the following example, we use Scilab to compute the probabilities of poker hands.
The poker game is based on a 52 cards deck, which is presented in figure 12. Each card can
have one of the 13 available ranks from 1 to K, and have on the 4 available suits , ♥, ♣ and
♠. Each player receives 5 cards randomly chosen in the deck. Each player tries to combine the
cards to form a well-known combination of cards as presented in the figure 13. Depending on the
combination, the player can beat, or be defeated by another player. The winning combination is
the rarest; that is, the one which has the lowest probability. In figure 13, the combinations are
presented in decreasing order of probability.
Even if winning at this game requires some understanding of human psychology, understanding
probabilities can help. Why does the four of a kind beats the full house ?
To answer this question, we will compute the probability of each event. Since the order of the
cards can be changed by the player, we are interested in combinations (and not in permutations).
We make the assumption that the process of choosing the cards is really random, so that all
combinations of 5 cards have the same probabilities, i.e. the distribution function is uniform.
Since the order of the cards does not matter, the sample space Ω is the set of all combinations of
26

Name Description Example
no pair none of the below combinations 7 3♣ 6♣ 3♥ 1♠
pair two cards of the same rank Q♣ Q♣ 2♥ 3♣ 1
double pair 2× two cards of the same rank 2 2♠ Q♠ Q♣
three of a kind three cards of the same rank 2 2♠ 2♥ 3♣ 1
straight five cards in a sequence, not all the same suit 3♥ 4♠ 5 6♠ 7
flush five cards in a single suit 2 3 7 J K
full house one pair and one triple, each of the same rank 2 2♠ 2♥ Q♣ Q♥
four of a kind four cards of the same rank 5 5♠ 5♣ 5♥ 2♥
straight flush five in a sequence in a single suit 2 3 4 5 6
royal flush 10, J, Q, K, 1 in a single suit 10♠ J♠ Q♠ K♠ 1♠
Figure 13: Winning combinations at the Poker
5 cards chosen from 52 cards. Therefore, the size of Ω is
#Ω =
52
5
= 2598960. (98)
The probability of a four of a kind is computed as follows. In a 52-cards deck, there are
13 different four of a kind combinations. Since the 5-th card is chosen at random from the 48
remaining cards, there are 13.48 different four of a kind. The probability of a four of a kind is
therefore
P(four of a kind) =
13.48
52
5
.
=
624
2598960
≈ 0.0002401 (99)
The probability of a full house is computed as follows. There are 13 different ranks in the
deck, and, once a rank is chosen, there are
4
2
different pairs for one rank Therefore the total
number of pairs is 13.
4
2
. Once the pair is set, there are 12 different ranks to choose for the
triple and there are
4
3
different triples for one rank. The total number of full house is therefore
13.
4
2
.12.
4
3
. Notice that the triple can be chosen first, and the pair second, but this would
lead exactly to the same result. Therefore, the probability of a full house is
P(full house) =
13.12.
4
2
.
4
3
52
5
.
=
3744
2598960
≈ 0.0014406 (100)
The computation of all the probabilities of the winning combinations is given as exercise.
27

(start)
p
q
p
p
q
q
p
p
p
p
q
q
q
q
S
F
S
S
S
S
S
F
F
F
F
F
F
S
Figure 14: A Bernoulli process with 3 trials. – The letter ”S” indicates ”success” and the letter
”F” indicates ”failure”.
2.12 Bernoulli trials
In this section, we present Bernoulli trials and the binomial discrete distribution function. We
give the example of a coin tossed several times as an example of such a process.
Definition 2.11. A Bernoulli trials process is a sequence of n > 0 experiments with the following
rules.
1. Each experiment has two possible outcomes, which we may call success and failure.
2. The probability p ∈ [0, 1] of success of each experiment is the same for each experiment.
In a Bernoulli process, the probability p of success is not changed by any knowledge of previous
outcomes For each experiment, the probability q of failure is q = 1 − p.
It is possible to represent a Bernoulli process with a tree diagram, as the one in figure 14.
A complete experiment is a sequence of success and failures, which can be represented by a
sequence of S’s and F’s. Therefore the size of the sample space is #(Ω) = 2n
, which is equal to
23
= 8 in our particular case of 3 trials.
By definition, the result of each trial is independent from the result of the previous trials.
Therefore, the probability of an event is the product of the probabilities of each outcome.
Consider the outcome x = ”SFS” for example. The value of the distribution function f for
this outcome is
f(x = ”SFS”) = pqp = p2
q. (101)
The table 15 presents the value of the distribution function for each outcome x ∈ Ω.
We can check that the sum of probabilities of all events is equal to 1. Indeed,
i=1,8
f(xi) = p3
+ p2
q + p2
q + pq2
+ p2
q + pq2
+ pq2
+ q3
(102)
= p3
+ 3p2
q + 3pq2
+ q3
(103)
= (p + q)3
(104)
= 1 (105)
28

x f(x)
SSS p3
SSF p2
q
SFS p2
q
SFF pq2
FSS p2
q
FSF pq2
FFS pq2
FFF q3
Figure 15: Probabilities of a Bernoulli process with 3 trials
We denote by b(n, p, j) the probability that, in n Bernoulli trials with success probability p,
there are exactly j successes. In the particular case where there are n = 3 trials, the ﬁgures 14
and 15 gives the following results:
b(3, p, 3) = p3
(106)
b(3, p, 2) = 3p2
p (107)
b(3, p, 1) = 3pq2
(108)
b(3, p, 0) = q3
(109)
The following proposition extends the previous analysis to the general case.
Proposition 2.12. ( Binomial probability) In a Bernoulli process with n > 0 trials with success
probability p ∈ [0, 1], the probability of exactly j successes is
b(n, p, j) =
n
j
pj
qn−j
, (110)
where 0 ≤ j ≤ n and q = 1 − p.
Proof. We denote by A ⊂ Ω the event that one process is associated with exactly j successes. By
deﬁnition, the probability of the event A is
b(n, p, j) = P(A) =
x∈A
f(x). (111)
Assume that an outcome x ∈ Ω is associated with exactly j successes. Since there are n trials,
the number of failures is n − j. That means that the value of the distribution function of this
outcome x ∈ A is f(x) = pj
qn−j
. Since all the outcomes x in the set A have the same distribution
function value, we have
b(n, p, j) = #(A)pj
qn−j
. (112)
The size of the set A is the number of subsets of j elements in a set of size n. Indeed, the order
does not matter since we only require that, during the whole process, the total number of successes
is exactly j, no matter of the order of the successes and failures. The number of outcomes with
exactly j successes is therefore #(A) =
n
j
, which, combined with equation 112, concludes the
proof.
29

Example A fair coin is tossed six times. What is the probability that exactly 3 heads turn up ?
This process is a Bernoulli process with n = 6 trials. Since the coin is fair, the probability of
success at each trial is p = 1/2. We can apply proposition 2.12 with j = 3 and get
b(6, 1/2, 3) =
6
3
(1/2)3
(1/2)3
≈ 0.3125, (113)
so that the probability of having exactly 3 heads is 0.3125.
3 Simulation of random processes with Scilab
In this section, we present how to simulate random events with Scilab. The problem of generating
random numbers is more complex and will not be detailed in this chapter. We begin by a brief
overview of random number generation and detail the random number generator used in the rand
function. Then we analyze how to generate random numbers in the interval [0, 1] with the rand
function. We present how to generate random integers in a given interval [0, m − 1] or [m1, m2].
In the ﬁnal part, we present a practical simulation of a game based on tossing a coin.
3.1 Overview
In this section, we present a special class of random number generators so that we can have a
general representation of what exactly this means.
The goal of a uniform random number generator is to generate a sequence of real values
un ∈ [0, 1] for n ≥ 0. Most uniform random number generators are based on the fraction
un =
xn
m
(114)
where m is a large integer and xn is a positive integer so that 0 < xn < m . In many random
number generators, the integer xn+1 is computed from the previous element in the sequence xn.
The linear congruential generators [6] are based on the sequence
xn+1 = (axn + c) (mod m), (115)
where
• m is the modulus satisfying m > 0,
• a is the multiplier satisfying 0 ≤ a < m,
• c is the increment satisfying 0 ≤ c < m,
• x0 is the starting value satisfying 0 ≤ x0 < m.
The parameters m, a, c and x0 should satisfy several conditions so that the sequence xn has
good statistical properties. Indeed, naive approaches leads to poor results in this matter. For
example, consider the example where x0 = 0, a = c = 7 and m = 10. The following sequence of
number is produced :
0.6 0.9 0. 0.7 0.6 0.9 0. 0.7 . . . (116)
30

Specific rules allow to design the parameters of a uniform random number generator.
As a practical example, consider the Urand generator [8] which is used by Scilab in the rand
function. Its parameters are
• m = 231
,
• a = 843314861,
• c = 453816693,
• x0 arbitrary.
The first 8 elements of the sequence are
0.2113249 0.7560439 0.0002211 0.3303271 (117)
0.6653811 0.6283918 0.8497452 0.6857310 . . . (118)
3.2 Generating uniform random numbers
In this section, we present some Scilab features which allow to simulate a discrete random process.
We assume here that a good source of random numbers is provided.
Scilab provides two functions which allow to generate uniform real numbers in the interval
[0, 1]. These functions are rand and grand. Globally, the grand function provides much more
features than rand. The random number generators which are used are also of higher quality.
For our purpose of presenting the simulation of random discrete events, the rand will be sufficient
and have the additional advantage of having a simpler syntax.
The simplest syntax of the rand function is
rand ()
Each call to the rand function produces a new random number in the interval [0, 1], as presented
in the following session.
-->rand ()
ans =
0.2113249
-->rand ()
ans =
0.7560439
-->rand ()
ans =
0.0002211
A random number generator is based on a sequence of integers, where the first element in the
sequence is the seed. The seed for the generator used in the rand is hard-coded in the library as
being equal to 0, and this is why the function always returns the same sequence of Scilab. This
allows to reproduce the behavior of a script which uses the rand function more easily.
The seed can be queried with the function rand("seed"), while the function rand("seed",s)
sets the seed to the value s. The use of the ”seed” input argument is presented in the following
session.
31

-->rand("seed")
ans =
0.
-->rand("seed" ,1)
-->rand ()
ans =
0.6040239
-->rand ()
ans =
0.0079647
In most random processes, several random numbers are to use at the same time. Fortunately,
the rand function allows to generate a matrix of random numbers, instead of a single value. The
user must then provide the number of rows and columns of the matrix to generate, as in the
following syntax.
rand(nr ,nc)
The use of this feature is presented in the following session, where a 2 × 3 matrix of random
numbers is generated.
-->rand (2,3)
ans =
0.6643966 0.5321420 0.5036204
0.9832111 0.4138784 0.6850569
3.3 Simulating random discrete events
In this section, we present how to use a uniform random number generator to generate integers in
a given interval. Assume that, given a positive integer m, we want to generate random integers
in the interval [0, m − 1]. To do this, we can use the rand function, and multiply the generated
numbers by m. We must additionally use the floor function, which returns the largest integer
smaller than the given number. The following function returns a matrix with size nr×nc, where
entries are random integers in the set {0, 1, . . . , m − 1}.
function ri = generateInRange0M1 ( m , nbrows , nbcols )
ri = floor(rand( nbrows , nbcols ) * m)
endfunction
In the following session, we generate random integers in the set {0, 1, . . . , 4}.
-->r = generateInRange0M1 ( 5 , 4 , 4 )
r =
2. 0. 3. 0.
1. 0. 2. 2.
0. 1. 1. 4.
4. 2. 4. 0.
To check that the generated integers are uniform in the interval, we compute the distribution
of the integers for 10000 integers in the set {0, 1, . . . , 4}. We use the bar to plot the result, which
is presented in the ﬁgure 16. We check that the probability of each integer is close to 1
5
= 0.2.
-->r = generateInRange0M1 ( 5 , 100 , 100 );
-->counter = zeros (1 ,5);
-->for i = 1:100
32

Figure 16: Distribution of random integers from 0 to 4.
-->for j = 1:100
--> k = r(i,j);
--> counter(k+1) = counter(k+1) + 1;
-->end
-->end
-->counter = counter / 10000;
-->counter
counter =
0.2023 0.2013 0.1983 0.1976 0.2005
-->bar(counter)
We emphasize that the previous verifications allow to check that the empirical distribution
function is the expected one, but that does not guarantee that the uniform random number
generator is of good quality. Indeed, consider the sequence xn = n (mod 5). This sequence
produces uniform integers in the set {0, 1, . . . , 4}, but, obviously, is far from being truly random.
Testing uniform random number generators is a much more complicated problem and will not be
presented here.
3.4 Simulation of a coin
Many practical experiments are very difficult to analyze by theory and, most of the time, very easy
to experiment with a computer. In this section, we give an example of a coin experiment which
is simulated with Scilab. This experiment is simple, so that we can check that our simulation
matches the result predicted by theory. In practice, when no theory is able to predict a probability,
it is much more difficult to assess the result of simulation.
The following Scilab function generates a random number with the rand function and use the
floor in order to get a random integer, either 1, associated with ”Head”, or 0, associated with
”Tail”. It prints out the result and returns the value.
// tossacoin --
33

// Prints "Head" or "Tail" depending on the simulation.
// Returns 1 for "Head", 0 for "Tail"
function face = tossacoin ( )
face = floor ( 2 * rand () );
if ( face == 1 ) then
mprintf ( "Headn" )
else
mprintf ( "Tailn" )
end
endfunction
With such a function, it is easy to simulate the toss of a coin. In the following session, we toss
a coin 4 times. The ”seed” argument of the rand is used so that the seed of the uniform random
number generator is initialized to 0. This allows to get consistent results across simulations.
rand("seed" ,0)
face = tossacoin ();
The previous script produces the following output.
Tail
Head
Tail
Tail
Assume that we are tossing a fair coin 10 times. What is the probability that we get exactly
5 heads ?
This is a Bernoulli process, where the number of trials is n = 10 and the probability is p = 5.
The probability of getting exactly j = 5 heads is given by the binomial distribution and is
P(”exactly 5 heads in 10 toss”) = b(10, 1/2, 5) (119)
=
10
5
p5
q10−5
, (120)
where p = 1/2 and q = 1 − p. The expected probability is therefore
P(”exactly 5 heads in 10 toss”) ≈ 0.2460938. (121)
The following Scilab session shows how to perform the simulation. Then, we perform 10000
simulations of the process. The floor function is used in combination with the rand function to
generate integers in the set {0, 1}. The sum allows to count the number of heads in the experiment.
If the number of heads is equal to 5, the number of successes is updated accordingly.
-->rand("seed" ,0);
-->nb = 10000;
-->success = 0;
-->for i = 1:nb
--> faces = floor ( 2 * rand (1 ,10) );
--> nbheads = sum(faces );
--> if ( nbheads == 5 ) then
--> success = success + 1;
--> end
34

-->end
-->pc = success / nb
pc =
0.2507
The computed probability is P = 0.2507 while the theory predicts P = 0.2460938, which
means that there is lest than two signiﬁcant digits. It can be proved that when we simulate an
experiment of this type n times, we can expect that the error is less or equal to 1√
n
at least 95%
of the time. With n = 10000 simulations, this error corresponds to 0.01, which is the accuracy of
our experiment.
4 Acknowledgments
I would like to thank John Burkardt for his comments about the numerical computation of the
permutation function.
5 References and notes
The material for section 1.1 is presented in [7], chapter 1, ”Set, spaces and measures”. The same
presentation is given in [4], section 1.2, ”Discrete probability distributions”. The example 1.2 is
given in [4].
The equations 19, 16 and 21 are at the basis of the probability theory so that in [12], these
properties are stated as axioms.
In some statistics books, such as [5] for example, the union of the sets A and B is denoted by
the sum A + B, and the intersection of sets is denoted by the product AB. We did not use these
notations in this document.
Combinatorics topics presented in section 2 can be found in [4], chapter 3, ”Combinatorics”.
The example of Poker hands is presented in [4], while the probabilities of all Poker hands can be
found in Wikipedia [14].
The gamma function presented in section 2.3 is covered in many textbook, as in [1]. An
in-depth presentation of the gamma function is done in [13].
Some of the section 3 which introduces to random number generators is based on [6].
References
[1] M. Abramowitz and I. A. Stegun. Handbook of Mathematical Functions with Formulas,
Graphs, and Mathematical Tables. Dover Publications Inc., 1972.
[2] George E. Andrews, Richard Askey, and Ranjan Roy. Special Functions. Cambridge Univer-
sity Press, Cambridge, 1999.
[3] Richard Durstenfeld. Algorithm 235: Random permutation. Commun. ACM, 7(7):420, 1964.
[4] Charles Grinstead, M. and J. Snell, Laurie. Introduction to probabilities, Second Edition.
American Mathematical Society, 1997.
[5] J. M. Hammersley and D. C. Handscomb. Monte Carlo Methods. Chapman and Hall, 1964.
35

[6] D. E. Knuth. The Art of Computer Programming, Volume 2, Seminumerical Algorithms.
Third Edition, Addison Wesley, Reading, MA, 1998.
[7] M. Lo`eve. Probability Theory I, 4th Edition. Springer, 1963.
[8] Michael A. Malcolm and Cleve B. Moler. Urand: a universal random number generator.
Technical report, Stanford, CA, USA, 1973.
[9] Lincoln E. Moses and V. Oakford, Robert. Tables of random permutations. Stanford Uni-
versity Press, Stanford, Calif., 1963.
[10] Dmitry Panchenko. Introduction to probability and statistics. Lectures notes taken by Anna
Vetter.
[11] Wolfram Research. Wolfram alpha. http://www.wolframalpha.com.
[12] M. Ross, Sheldon. Introduction to probability and statistics for engineers and scientists. John
Wiley and Sons, 1987.
[13] Pascal Sebah and Xavier Gourdon. Introduction to the gamma function.
[14] Wikipedia. Poker probability — wikipedia, the free encyclopedia, 2009.
36

Index
Bernoulli, 29
binomial, 24
combination, 24
combinatorics, 13
complementary, 3
conditional
distribution function, 10
probability, 10
disjoint, 3
event, 4
factorial, 14, 21
fair die, 10
gamma, 16
grand, 32
intersection, 3
outcome, 4
permutation, 13
permutations, 23
poker, 27
rand, 32
random, 4
rank, 27
sample space, 4
seed, 32
subset, 3
suit, 27
tree diagram, 13
uniform, 9
union, 3
Venn, 3
37

Introduction to Discrete Probabilities with Scilab - Michaël Baudin, Consortium Scilab - DIGITEO, 2010

More Related Content

What's hot (20)

Viewers also liked (20)

Similar to Introduction to Discrete Probabilities with Scilab - Michaël Baudin, Consortium Scilab - DIGITEO, 2010 (20)

More from Scilab (20)

Recently uploaded (20)

Introduction to Discrete Probabilities with Scilab - Michaël Baudin, Consortium Scilab - DIGITEO, 2010