Iot based home automation
- 1. Presented By: Under Esteemed Guidance Of : C.Geetha(133T1A0417) P.KISHOR KUMAR M.Tech,MISTE. A.Mounika(133T1A0405) Assistant Professor of ECE Dept L.Keerthi chowdari(133T1A0450) A.Sree Usha(133T1A0403) Department of Electronics & Communication Engineering
- 2. INTRODUCTION EXISTING SYSTEM PROPOSED SYSTEM BLOCK DIAGRAM HARDWARE REQUREMENTS SOFTWARE REQUREMENTS ADVANTAGES APPLICATIONS
- 4. 1. Home Automation 2. Internet of Things
- 5. Automation of house, house work, household activities. ● Simplicity ● Affordability
- 7. a scenario in which objects, animals or people are providedwith unique identifiers and the ability to transfer data over a network without requiring human-to-human or human-to- computer interaction.
- 9. Control most of your devices at home using your Laptop or phone. Get feedback about the status of your home via Internet. Provide an easily and comfortable way to control your home devices from any place.
- 10. People usually are outside the home for many reasons like travelling and they want to control some devices from a far distance. Examples: Want to fill the water tank. Want to turn off the light and electronic devices at rooms. Get feedback about the temperature. If somebody at your home. Total control on your home.
- 11. Home automation gives you access to control devices in your home from a laptop , mobile device, anywhere in the world. Home automation more accurately describes homes in which nearly everything -- lights, appliances, electrical outlets, heating and cooling systems -- are hooked up to a remotely controllable network
- 12. MICRO CONTROLLER RELAY 1 RELAY 2 RALAY 3 CRYSTAL OSCILLATOR POWER SUPPLY Wi-Fi Module ESP8266 Webpage
- 13. Micro controller ESP 8266 Wi-Fi module Relays Power supply AC loads ( bulbs or fans)
- 15. • Arduino is a microcontroller board based on the ATmega328. • It has 14 digital input/output pins (of which 6 can be used as PWM outputs). • 6 analog inputs. • A 16 MHz Crystal. • A USB connection. • A power jack. • A reset button
- 16. • 28 pin PDIP Package IC • 8-bit Microcontroller • 2k bytes of SRAM • 32K bytes of on chip Flash • 1K byte of EEPROM • One serial port - USART • Three parallel ports - PB, PC and PD • Three timers(Two 8-bit and One 16-bit)
- 17. • 6 PWM Channels • 6-channel 10-bit ADC • One SPI interface • One I2C interface • One WatchDog Timer • Internal and External Interrupts • High Performance and Low Power consumption.
- 18. Sending it AT commands from a computer via an USB to serial adapter. This is mostly useful for testing and setup. Interfacing with an Arduino or any other microcontoller and using this board as a peripheral.
- 20. There are 5 Pins in a relay. Two pins 1 and 2 are two ends of a coil that are kept inside the relay. The coil is wound on a small rod that gets magnetized whenever current passes through it.
- 22. The open-source Arduino Software (IDE) makes it easy to write code and upload it to the board. It runs on Windows, Mac OS X, and Linux. The environment is written in Java and based on Processing and other open- source software. This software can be used with any Arduino board.
- 24. A webpage is a document commonly written in Hyper Text Markup Language (HTML) that is accessible through the Internet or other network using an Internet browser. A web page is accessed by entering a URL address and may contain text, graphics to other web pages and files
- 25. Secures Home Through Automated Door Locks. Increases Awareness Through Security Cameras. Saves Time. Saves Money and Increases Convenience.
- 26. Contributes to Economy. Increases Peace of Mind.
- 27. Equipment and installation costs. Human errors(wrong password or id in webpage and loose connections). Reliability.
- 28. Lighting Control Lawn Irrigation Systems: The Grass is Always Greener Smart Appliances Security Systems