IRJET- Design of SCADA based Wireless Monitoring and Control

International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 06 Issue: 03 | Mar 2019 www.irjet.net p-ISSN: 2395-0072
© 2019, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 5230
Design of SCADA Based Wireless Monitoring and Control
Prof. Manisha Bhole 1, Ms. Maitreyee Potdar 1, Ms. Sneha Rajbhar 1, Mr. Dipendra Singh 1,
Mr. Shubham Zalake 1
1Department of Instrumentation Engineering, Bharati Vidyapeeth College of Engineering, Belpada, Navi Mumbai
------------------------------------------------------------------------***-------------------------------------------------------------------------
Abstract – Controlling and Monitoring have paramount importance intheprocessindustry. Aslayingcablesforthe fieldsensors
and final control element increases the cost and gives the option to be monitored by operator person only. Tomakeitavailablefor
the process engineer, the SCADA screen of the complete process has to be presented at his/her desk too without the use of more
cables which adds up to the final cost. This paper provides a low-cost solution for the above problem by using the Indusoft Web
Studio for the wireless access of the SCADA screen to more than operator. It utilizes the IIS Manger of the Computer and is
uploaded on the server and made available to process engineer with security. By using the methodology, we intend to avoid
occurring of hazardous situation caused by the ignorance of operator.
Keywords: Wireless Monitoring & Control, Scada, HMI, Indusoft Web Studio, Industrial automation.
1. INTRODUCTION
The aim is to make a control system which can be operated by the operator at the control station as well asonsiteengineers or
the operator away from the control station in order to minimize risks involved in the plant due to absence of personnel at the
control unit. This provision is given to avoid carelessnessandhazardousconditions. Theallowancegiventotheuserislowered
from control panel operator towards the field engineer. To achieve the remote control, we researched about SCADA software
by Wonderware Intouch and Indusoft Web Studio. Intouch, although easy to learn and versatile in multiple formats, did not
have any provisions for wireless connectivity. We had to thus look forward into Indusoft Web Studio for our project
progressions. With Indusoft we encountered certainproblemsaswell,followingwhichwehadtocontactthecompanyandgain
their assistance once.
2. LITERATURE SURVEY
Several Articles for our project were studied. Since the programming part of DCS have been discussed[6] in ‘Design of SCADA
Based Wireless Monitoring and Control’. The development of interactive Scada screen[5] will always playanimportantrolein
similar kind of projects. The important and main software of this project ‘The Indusoft Web Studio’ [5] is a very powerful
software with lot of features of wireless interfacing with the “Engineering Mainframe”.
3. SYSTEM ARCHITECTURE
Fig -1.:System Architecture

Fig. 1 highlights the system architecture, which consist of sensors, final control element, DCS, SCADA. The sensors and final
control elements are the field devices which are used for the purpose of input and output to the process or from the process
(i.e. sensing field parameters and providing input to the control programorgenerating anequivalentoutputbasedontheinput
from field devices and controlling the process). In our project work, we are using level loop which consist of level sensor and
control valve as the field devices and DCS as the main controller. Thecontroller(DCS)consistofdigital andanalogI/Omodules,
communication channel. For the purpose of wireless control and monitoring to more than operator station we have used
indusoft web studio. It is a powerful scada software giving us the advantage of easy access to HMI through thin client network.
The DCS communicates with the Indusoft Web Studio through Modbus RTU via TCP/IP. The medium of communication is RS-
232 wire connected to the ethernet port of the laptop. In Modbus communication, every process variable like PV (Process
Variable), RSP (Resting Setpoint) have an I/O address which has to be called from the SCADA communication driver sheet to
get the actual values in the SCADA screen. After Completing the Modbus communicationdriversheet,designingSCADAscreen,
tagging every symbol, all the screens must be saved. Then publish all the screens as HTML from the menu tab. Completing all
the process, we now need the iis Manager to access all the published html file of scada screen on the internet. We do have to
add a site file in the iis manager to get this done.
4. SYSTEM HARDWARE
4.1. Cascade Loop
For the field process of the project we preferred a cascade loop with flow as the primary loop and level as the secondary loop.
This loop consists of control valve, water
Fig- 2. Process Flow Diagram
pump, level transmitter, i/p converter as the field devices which are interfaced with the dcs to the analog input and output.
Fig- 3. Piping & Instrumentation Diagram

4.2. Honeywell 900: C-30
The Honeywell ControlEdge HC900 Controllerisanadvancedloopandlogiccontrollerofferinga modulardesignsizedtosatisfy
the control and data management needs of a wide range ofprocess equipment. When combined with the optional 900 Control
Station operator Interface thatis highly integrated with the controller’s database, configuration and setup time is minimized.
This powerful combination together with Honeywell’sperformanceprovencontrol technology providesusersanideal solution
for process control. Open Ethernet connectivity with ModbusTCP Protocol also allows network access using a variety of
HMI/SCADA software. Program execution environment is protected using an independent watchdogtimer.The DCS whichwe
are using consist of One CPU (Controller Module), 1 Analog input module, 1 Analog output module, 1 Digital input module, 1
Digital output module and a power supply module
Fig- 4. Honeywell 900: C-30 Hybrid Control
(SMPS). It is a non-redundant controller. Aswe are using the DCS to controller a process, we will be using the analog i/o
modules only.
5. SYSTEM SOFTWARE
The main two software required for the monitoring and controlling purpose are ‘INDUSOFT WEB STUDIO’ and ‘INTERNET
INFORMATION SERVICES MANAGER’.
5.1. Indusoft web studio
Indusoft web studio[4] is a powerful scada software use for the purpose of monitoring and controlling the process / process
variables. The indusoft web studio comes with the features like thin client network, mobile access. This software let the user
access the scada screen in his/her office which is available at the operator workstation in the field devices andthustomonitor
the process or look at the parameter and keep a check on the particular process of a plant which in return reduces the
possibility of any incident to occur as more than two or two people will be having the watch over the process.AnIndusoftWeb
Studio is a powerful tool for the monitoring and scada purpose.
5.2. Internet Information Services (IIS) Manager
Internet Information Services (IIS), formerly Internet InformationServer)isanextensible webserver createdby Microsoft for
use with the WindowsNT family. IIS supports protocol like HTTP, HTTPS, SMTP and NNTP. It works as a web sever for the
device which helps the user to access the scada screen on any computer as it is in the main device or operator workstation. It
uses the HTML format of every scada to access it on web browser. For the project we used the HTTP protocol of the IIS
manager.

Fig -5. IIS Manager
6. RESULT
After the completion of interfacing of scada screen with the hardware, the final output screen we prepared let you have the
control over the process by giving the setpoint from the screen itself and keep a watch on the trends window and alarm
window which will inform the operator about any misbehavior of the process like low water level in the tank or high-water
level in the tank. The final designed scada screen is as given below:
F.ig -6. Main
Screen
Fig -7. Alarm Screen

7. CONCLUSION
The proposed paper suggests design and implement a wireless monitoring and control system for a process. The system is
based on Indusoft Web Studio wireless communication protocol and highlights the use of an innovative, yet simple and
effective control algorithm. The implementation has been done for a point-to-point system that has only one field unit, but
given the user friendliness of wireless technology the systemcanbeupgradedformonitoringseveral fieldunits.The developed
system is low cost, reliable and accurate for processes where safety and monitoring have enormous importance. The
implementation of this system not only reduces the cost of wireless but also gives access to more than one operator to the
process.
REFERENCES
[1] Instrument Engineer’s Handbook: Bela G. Liptak.
[2] Saurav Paul; Sushant Narang, “Design of SCADA basedWireless Monitoring andControl System using ZigBee”
[3] Tai-hoon Kim , “Integration of Wireless SCADA through the Internet.
[4] InduSoft Web Studio HMI SCADA Development manual.
[5] Stuart A. Boyer, “SCADA supervisory control and data acquisition”, ISA Publication.
[6] Thomas Hughes, “Programmable Logic Controller”, ISA Publication.
[7] Amulya Keeli; E Prudhvi Teja , N. Devi, G. Venkates warlu ”Wireless SCADA for Industrial Automation”

IRJET- Design of SCADA based Wireless Monitoring and Control

More Related Content

What's hot (20)

Similar to IRJET- Design of SCADA based Wireless Monitoring and Control (20)

More from IRJET Journal (20)

Recently uploaded (20)

IRJET- Design of SCADA based Wireless Monitoring and Control