SCADA Overview
7 likes3,274 views
This document provides an overview of supervisory control and data acquisition (SCADA) systems. It defines SCADA and describes common system components like HMIs, RTUs, and supervisory stations. It discusses the differences between supervision and control in SCADA. It also outlines SCADA concepts, hardware solutions, operational philosophy, communication methods, generations of SCADA from monolithic to networked, trends including increased standardization and networking, and security issues associated with newer networked SCADA systems.
SCADA Overview
- 1. 2010 Principles of SCADA Sougata Mitra Sougata Mitra 2010/ACPPM/08754 iamsougata@gmail.com 98363 47212
- 2. Sougata Mitra Principles of SCADA Table of Contents Definition ................................................................................................................................................ 3 Common system components ................................................................................................................. 3 Supervision vs. control ............................................................................................................................ 4 Systems concepts .................................................................................................................................... 4 Human Machine Interface ....................................................................................................................... 5 Hardware solutions ................................................................................................................................. 6 Remote Terminal Unit (RTU).................................................................................................................... 6 Supervisory Station ................................................................................................................................. 6 Operational philosophy ........................................................................................................................... 7 Communication infrastructure and methods ........................................................................................... 7 SCADA Generation................................................................................................................................... 8 First generation: "Monolithic" ..................................................................................................... 8 Second generation: "Distributed"................................................................................................ 8 Third generation: "Networked" ................................................................................................... 8 Trends in SCADA ...................................................................................................................................... 8 Security issues ......................................................................................................................................... 9 Page | 2
- 3. Sougata Mitra Principles of SCADA DEFINITION SCADA stands for supervisory control and data acquisition. It generally refers to an industrial control system: a computer system monitoring and controlling a process. The process can be industrial, infrastructure or facility-based as described below: o o o Industrial processes include those of manufacturing, production, power generation, fabrication, and refining, and may run in continuous, batch, repetitive, or discrete modes. Infrastructure processes may be public or private, and include water treatment and distribution, wastewater collection and treatment, oil and gas pipelines, electrical power transmission and distribution, civil defense siren systems, and large communication systems. Facility processes occur both in public facilities and private ones, including buildings, airports, ships, and space stations. They monitor and control HVAC, access, and energy consumption. COMMON SYSTEM COMPONENTS A SCADA System usually consists of the following subsystems: A Human-Machine Interface or HMI is the apparatus which presents process data to a human operator, and through this, the human operator monitors and controls the process. A supervisory (computer) system, gathering (acquiring) data on the process and sending commands (control) to the process. Remote Terminal Units (RTUs) connecting to sensors in the process, converting sensor signals to digital data and sending digital data to the supervisory system. Programmable Logic Controller (PLCs) used as field devices because they are more economical, versatile, flexible, and configurable than special-purpose RTUs. Figure b: PLC Figure a: HMI Figure c :RTU Page | 3
- 4. Sougata Mitra Principles of SCADA SUPERVISION VS. CONTROL There is, in several industries, considerable confusion over the differences between SCADA systems and DCS. Generally speaking, a SCADA system usually refers to a system that coordinates, but does not . coordinates control processes. The discussion on real time control is muddied somewhat by newer ussion real-time telecommunications technology, enabling reliable, low latency, high speed communications over wide areas. Most differences between SCADA and DCS are culturally determined and can usually be ignored. As communication infrastructures with higher capacity become available, the difference between SCADA and DCS will fade. SYSTEMS CONCEPTS The term SCADA usually refers to centralized systems which monitor and control entire sites, or complexes of systems spread out over large s areas (anything between an industrial plant and a country). Most control actions are performed automatically by Remote Terminal Units ("RTUs") or by programmable logic controllers ("PLCs"). Host control functions are usually restricted to basic overriding or supervisory level intervention. For example, a PLC may control the flow of cooling water through part of an industrial process, but the SCADA system may allow operators to change the set points for the flow,and enable alarm conditions, such as loss of flow and high temperature, to be displayed and recorded. The feedback control loop passes through the RTU or PLC, while the SCADA system monitors the overall performance of the loop. Data acquisition begins at the RTU or PLC level and includes meter readings and equipment status reports that are communicated to SCADA as required. Data is then compiled and formatted in such a way that a control room operator using the HMI can make supervisory decisions to adjust or override normal RTU (PLC) controls. Data may also be fed to a Historian, often built on a commodity Database Management System, to allow trending and other analytical auditing. , tren SCADA systems typically implement a distributed database, commonly referred to as a tag database, which contains data elements called tags or points. A point represents a single input or output value . monitored or controlled by the system. Points can be either "hard" or "soft". A hard point represents an led actual input or output within the system, while a soft point results from logic and math operations applied to other points. (Most implementations conceptually remove the distinction by making every property a "soft" point expression, which may, in the simplest case, equal a single hard point.) Points are normally stored as value-timestamp pairs: a value, and the timestamp when it was recorded or timestamp calculated. A series of value-timestamp pairs gives the history of that point. It's also common to store timestamp additional metadata with tags, such as the path to a field device or PLC register, design time comments, and alarm information. Page | 4
- 5. Sougata Mitra Principles of SCADA HUMAN MACHINE INTERFACE Typical Basic SCADA Animations A Human-Machine Interface or HMI is the apparatus which presents process data to a human operator, and through which the human operator controls the process. An HMI is usually linked to the SCADA system's databases and software programs, to provide trending, diagnostic data, and management information such as scheduled maintenance procedures, logistic information, detailed schematics for a particular sensor or machine, and expertsystem troubleshooting guides. The HMI system usually presents the information to the operating personnel graphically, in the form of a mimic diagram. This means that the operator can see a schematic representation of the plant being controlled. For example, a picture of a pump connected to a pipe can show the operator that the pump is running and how much fluid it is pumping through the pipe at the moment. The operator can then switch the pump off. The HMI software will show the flow rate of the fluid in the pipe decrease in real time. Mimic diagrams may consist of line graphics and schematic symbols to represent process elements, or may consist of digital photographs of the process equipment overlain with animated symbols. The HMI package for the SCADA system typically includes a drawing program that the operators or system maintenance personnel use to change the way these points are represented in the interface. These representations can be as simple as an on-screen traffic light, which represents the state of an actual traffic light in the field, or as complex as a multi-projector display representing the position of all of the elevators in a skyscraper or all of the trains on a railway. An important part of most SCADA implementations are alarms. An alarm is a digital status point that has either the value NORMAL or ALARM. Alarms can be created in such a way that when their requirements are met, they are activated. An example of an alarm is the "fuel tank empty" light in a car. The SCADA operator's attention is drawn to the part of the system requiring attention by the alarm. Emails and text messages are often sent along with an alarm activation alerting managers along with the SCADA operator. Page | 5
- 6. Sougata Mitra Principles of SCADA HARDWARE SOLUTIONS SCADA solutions often have Distributed Control System (DCS) components. Use of "smart" RTUs or PLCs, which are capable Since about 1998, virtually all major of autonomously executing simple logic processes without PLC manufacturers have offered involving the master computer, is increasing. A functional integrated HMI/SCADA systems, many block programming language, IEC 61131-3 (Ladder Logic), is of them using open and nonfrequently used to create programs which run on these RTUs proprietary communications and PLCs. Unlike a procedural language such as the C protocols. Numerous specialized thirdprogramming language or FORTRAN, IEC 61131-3 has minimal party HMI/SCADA packages, offering training requirements by virtue of resembling historic physical built-in compatibility with most major control arrays. This allows SCADA system engineers to perform PLCs, have also entered the market, both the design and implementation of a program to be allowing mechanical engineers, executed on an RTU or PLC. A Programmable automation electrical engineers and technicians to controller (PAC) is a compact controller that combines the configure HMIs themselves, without features and capabilities of a PC-based control system with the need for a custom-made program that of a typical PLC. PACs are deployed in SCADA systems to written by a software developer. provide RTU and PLC functions. In many electrical substation SCADA applications, "distributed RTUs" use information processors or station computers to communicate with protective relays, PACS, and other devices for I/O, and communicate with the SCADA master in lieu of a traditional RTU. REMOTE TERMINAL UNIT (RTU) The RTU connects to physical equipment. Typically, an RTU converts the electrical signals from the equipment to digital values such as the open/closed status from a switch or a valve, or measurements such as pressure, flow, voltage or current. By converting and sending these electrical signals out to equipment the RTU can control equipment, such as opening or closing a switch or a valve, or setting the speed of a pump. SUPERVISORY STATION The term "Supervisory Station" refers to the servers and software responsible for communicating with the field equipment (RTUs, PLCs, etc), and then to the HMI software running on workstations in the control room, or elsewhere. In smaller SCADA systems, the master station may be composed of a single PC. In larger SCADA systems, the master station may include multiple servers, distributed software applications, and disaster recovery sites. To increase the integrity of the system the multiple servers will often be configured in a dual-redundant or hot-standby formation providing continuous control and monitoring in the event of a server failure. Initially, more "open" platforms such as Linux were not as widely used due to the highly dynamic development environment and because a SCADA customer that was able to afford the field hardware and devices to be controlled could usually also purchase UNIX or OpenVMS licenses. Today, all major operating systems are used for both master station servers and HMI workstations. Page | 6
- 7. Sougata Mitra Principles of SCADA OPERATIONAL PHILOSOPHY For some installations, the costs that would result from the control system failing are extremely high. Possibly even lives could be lost. Hardware for some SCADA systems is ruggedized to withstand temperature, vibration, and voltage extremes, but in most critical installations reliability is enhanced by having redundant hardware and communications channels, up to the point of having multiple fully equipped control centres. A failing part can be quickly identified and its functionality automatically taken over by backup hardware. A failed part can often be replaced without interrupting the process. The reliability of such systems can be calculated statistically and is stated as the mean time to failure, which is a variant of mean time between failures. The calculated mean time to failure of such high reliability systems can be on the order of centuries. COMMUNICATION INFRASTRUCTURE AND METHODS SCADA systems have traditionally used combinations of radio and direct serial or modem connections to meet communication requirements, although Ethernet and IP over SONET / SDH is also frequently used at large sites such as railways and power stations. The remote management or monitoring function of a SCADA system is often referred to as telemetry. This has also come under threat with some customers wanting SCADA data to travel over their preestablished corporate networks or to share the network with other applications. The legacy of the early low-bandwidth protocols remains, though. SCADA protocols are designed to be very compact and many are designed to send information to the master station only when the master station polls the RTU. Typical legacy SCADA protocols include Modbus RTU, RP-570, Profibus and Conitel. These communication protocols are all SCADA-vendor specific but are widely adopted and used. Standard protocols are IEC 60870-5-101 or 104, IEC 61850 and DNP3. These communication protocols are standardized and recognized by all major SCADA vendors. Many of these protocols now contain extensions to operate over TCP/IP. It is good security engineering practice to avoid connecting SCADA systems to the Internet so the attack surface is reduced. RTUs and other automatic controller devices were being developed before the advent of industry wide standards for interoperability. The result is that developers and their management created a multitude of control protocols. Among the larger vendors, there was also the incentive to create their own protocol to "lock in" their customer base. A list of automation protocols is being compiled here. Recently, OLE for Process Control (OPC) has become a widely accepted solution for intercommunicating different hardware and software, allowing communication even between devices originally not intended to be part of an industrial network. Page | 7
- 8. Sougata Mitra Principles of SCADA SCADA GENERATION FIRST GENERATION: "MONOLITHIC" In the first generation computing was done by mainframe systems. Networks didn’t exist at the time SCADA was developed. Thus SCADA systems were independent systems with no connectivity to other systems. Wide Area Networks were later designed by RTU vendors to communicate with the RTU. The communication protocols used were often proprietary at that time. The first-generation SCADA system was redundant since a back-up mainframe system was connected at the bus level and was used in the event of failure of the main mainframe system. SECOND GENERATION: "DISTRIBUTED" The processing was distributed across multiple stations which were connected through LAN and they shared information in real time. Each station was responsible for a particular task thus making the size and cost of each station less than the one used in First Generation. The network protocols used were still mostly proprietary, which led to significant security problems for any SCADA system that received attention from a hacker. Since the protocols were proprietary, very few people beyond the developers and hackers knew enough to determine how secure a SCADA installation was. Since both parties had vested interests in keeping security issues quiet, the security of a SCADA installation was often badly overestimated, if it was considered at all. THIRD GENERATION: "NETWORKED" These are the current generation SCADA systems which use open system architecture rather than a vendor-controlled proprietary environment. The SCADA system utilizes open standards and protocols, thus distributing functionality across a WAN rather than a LAN. It is easier to connect third party peripheral devices like printers, disk drives, and tape drives due to the use of open architecture. WAN protocols such as Internet Protocol (IP) are used for communication between the master station and communications equipment. Due to the usage of standard protocols and the fact that many networked SCADA systems are accessible from the Internet, the systems are potentially vulnerable to remote cyberattacks. On the other hand, the usage of standard protocols and security techniques means that standard security improvements are applicable to the SCADA systems, assuming they receive timely maintenance and updates. TRENDS IN SCADA There is a trend for PLC and HMI/SCADA software to be more "mix-and-match". In the mid 1990s, the typical DAQ I/O manufacturer supplied equipment that communicated using proprietary protocols over a suitable-distance carrier like. End users who invested in a particular vendor's hardware solution often found themselves restricted to a limited choice of equipment when requirements changed. To mitigate such problems, open communication protocols such as IEC , IEC 61850, serial, and DNP3 LAN/WAN became increasingly popular among SCADA equipment manufacturers and solution providers alike. SCADA systems enabled users to mix-and-match products from different vendors to develop solutions that were better than those that could be achieved when restricted to a single vendor's product offering. Page | 8
- 9. Sougata Mitra Principles of SCADA Towards the late 1990s, the shift towards open communications continued with individual I/O manufacturers as well, who adopted open message structures such as Modbus RTU and Modbus ASCII over RS-485. By 2000, most I/O makers offered completely open interfacing such as TCP over Ethernet and IP. SCADA systems are coming in line with standard networking technologies. and TCP/IP based protocols are replacing the older proprietary standards. Although certain characteristics of frame-based network communication technology have restricted the adoption of Ethernet in a few specialized applications, the vast majority of markets have accepted Ethernet networks for HMI/SCADA. SCADA systems are becoming increasingly ubiquitous. , web portals, and products are gaining popularity with most major vendors. The increased convenience of end users viewing their processes remotely introduces security considerations. While these considerations are already considered solved in other sectors of internet services, not all entities responsible for deploying SCADA systems have understood the changes in accessibility and threat scope implicit in connecting a system to the internet With the emergence of in the broader software industry, a few vendors have begun offering application specific SCADA systems hosted on remote platforms over the network. This removes the need to install and commission systems at the end-user's facility and takes advantage of security features already available in Internet technology, s and . Some concerns include security, Donald Wallace (2003-09-01). SECURITY ISSUES The move from proprietary technologies to more standardized and open solutions together with the increased number of connections between SCADA systems and office networks and the Internet has made them more vulnerable to attacks - see references. Consequently, the security of SCADA-based systems has come into question as they are increasingly seen as extremely vulnerable to cyberwarfare/cyber terrorism attacks. In particular, security researchers are concerned about: The lack of concern about security and authentication in the design, deployment and operation of existing SCADA networks The mistaken belief that SCADA systems have the benefit of security through obscurity through the use of specialized protocols and proprietary interfaces The mistaken belief that SCADA networks are secure because they are purportedly physically secured The mistaken belief that SCADA networks are secure because they are supposedly disconnected from the Internet SCADA systems are used to control and monitor physical processes, examples of which are transmission of electricity, transportation of gas and oil in pipelines, water distribution, traffic lights, and other systems used as the basis of modern society. The security of these SCADA systems is important because Page | 9
- 10. Sougata Mitra Principles of SCADA compromise or destruction of these systems would impact multiple areas of society far removed from the original compromise. For example, a blackout caused by a compromised electrical SCADA system would cause financial losses to all the customers that received electricity from that source. How security will affect legacy SCADA and new deployments remains to be seen. There are two distinct threats to a modern SCADA system. First is the threat of unauthorized access to the control software, whether it be human access or changes induced intentionally or accidentally by virus infections and other software threats residing on the control host machine. Second is the threat of packet access to the network segments hosting SCADA devices. In many cases, there is rudimentary or no security on the actual packet control protocol, so anyone who can send packets to the SCADA device can control it. In many cases SCADA users assume that a VPN is sufficient protection and are unaware that physical access to SCADA-related network jacks and switches provides the ability to totally bypass all security on the control software and fully control those SCADA networks. These kinds of physical access attacks bypass firewall and VPN security and are best addressed by endpoint-to-endpoint authentication and authorization such as are commonly provided in the non-SCADA world by in-device SSL or other cryptographic techniques. Many vendors of SCADA and control products have begun to address these risks in a basic sense by developing lines of specialized industrial firewall and VPN solutions for TCP/IP-based SCADA networks. Additionally, application whitelisting solutions are being implemented because of their ability to prevent malware and unauthorized application changes without the performance impacts of traditional antivirus scans. Also, the ISA Security Compliance Institute (ISCI) is emerging to formalize SCADA security testing starting as soon as 2009. ISCI is conceptually similar to private testing and certification that has been performed by vendors since 2007. Eventually, standards being defined by ISA99 WG4 will supersede the initial industry consortia efforts, but probably not before 2011 . The increased interest in SCADA vulnerabilities has resulted in vulnerability researchers discovering vulnerabilities in commercial SCADA software and more general offensive SCADA techniques presented to the general security community. In electric and gas utility SCADA systems, the vulnerability of the large installed base of wired and wireless serial communications links is addressed in some cases by applying bump-in-the-wire devices that employ authentication and Advanced Encryption Standard encryption rather than replacing all existing nodes. Page | 10
- 11. Sougata Mitra Principles of SCADA Page | 11