IRJET- IoT Based Digital Notice Board Using Raspberry Pi with Audio Alert System

International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 06 Issue: 03 | Mar 2019 www.irjet.net p-ISSN: 2395-0072
© 2019, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 7602
IoT Based Digital Notice Board Using Raspberry Pi with Audio Alert
System
Miss.Sourabhi B. Kurane1, Miss. Poonam R. Aswale2, Miss.Nirmla A.Bachate3,
Prof. C. M. Gaikwad4
At –Rajedranagar, Tal-Karveer, Dist- Kolhapur, Pin-416008
At-Nigave, Post- Bahireshvar, Tal-Karveer, Dist-Kolhapur Pin -416001
Dept. Of Electronic and Telecommunication Engineering, Sanjeevan Engineering and Technology Institute,
Panhala
---------------------------------------------------------------------***---------------------------------------------------------------------
Abstract - Internet of Thing is the interconnection of uniquely
identifiable embedded computing devices within the existing
infrastructure. It alsousesthewirelesssensorsnetworkswhich
are group of specialized transducers with a communication
infrastructure for monitoring and recording condition at
diverse location. Notice boards primary thing in many places
like institutions, public utility places i.e. Bus stops, railway
stations, colleges, malls etc. but sticking various noticesdayto
day is a tedious process and also a separate person is required
to take care of it daily and manually. This project so about
advanced wireless noticeboard. The main objective of project
is ARM controller 11 raspberry pi which is heart of the system.
Display is obtained on projector or LCD monitor. Wi-Fi is used
for data transmission. At any time, we can add or remove or
alter the image according to our requirement. At transmitter
allocate PC or mobile is used for sending a notice or messages.
At receiver side, Wi-Fi is connected to raspberry pi. All users
would be notified about the notice being displayed with a
sound alert. This project deals with the use of IoT and
raspberry pi.
Key Words: Raspberry Pi card, electronic components.
1. INTRODUCTION
In these modern worlds, nowadays everyone need a
comforting living life. Man has researched different
technology for his need. In today’s world of full ofconnected,
people are becoming habitual to easy access to information.
Whether the information is received various mode through
the internet or television, people wanted to be informed
and up to date with the latest events happening around the
world. Wired network connectionsuchasEthernethasmany
drawbacks depending on the need and type of connection
because wireless connection can interact with people easily
and it requires less time. The main goal of the project is to
construct an internet based graphical notice board system
using raspberry pi that display message sent from the user,
and it is simple to design, easy to install, user-friendly
system, which can receive and display notice in a particular
manner with respect to date and time so that the user can
easily access or know the latest notices or message.
2. Present Technology
Many states of the art and cutting edge universities in the
world rely on notice board hanging on the wall to display
announcements. The over reliance of this practice in a
university is still no enough to pass relevant information
around as many problems are encountered. Weconsiderthe
case study of professional colleges where information is a
vital keys for knowing the updates of thecampus.Thegoal of
this system is to provide the access to notice and articles
quickly no only within the college premises, also wherever
and whenever they need to know. Also, it looks at the
development of the existing notice boards, making it run by
the interest access or by local area network (LAN) or
internet of thing (IoT).
3. Problem Definition
Mankind has always had a need for signs and notification at
places and events, which ranges from meeting times and
venues, to transport arrival and departure times. Such
notification guide society on making informed decisions
towards better lifestyle. While some notification used to be
relayed through audio means bytowncriersinvillagesin the
past, such methods are not suitable for towns and cities that
have witnessed tremendoustechnologyadvancements.Also,
few years ago, traditional noticeboardmethodsofphysically
sticking typed paper notices on wooden board waste
resources.
4. Proposed System
Initially idea of this system which will enable people to
wirelessly transmit noticesonnoticeboardusing Wi-Fi.Here
we have proposed a system bywhichonlyauthorizedperson
can handle the notice board. It requires less time due to fast
data transmission through Wi-Fi. The system is basedonthe
implementation internet of thing on raspberry pi. The
raspberry pi is a basic embedded system and being a low
cost a single board computer used to reduce the complexity
of system in real time application. This platform is mainly

based on python.
4. Proposed Work
Initially idea of this system which will enable people to
wirelessly transmit noticesonnoticeboardusing Wi-Fi.Here
we have proposed a system bywhichonlyauthorizedperson
can handle the notice board. It requires less time due to fast
data transmission through Wi-Fi. The system is basedonthe
implementation internet of thing on raspberry pi. The
raspberry pi is a basic embedded system and being a low
cost a single board computer used to reduce the complexity
of system in real time application. This platform is mainly
based on python
5. System Configuration
The proposed system implements by using raspberry pi,
internet of thing (IoT) and MQTT dashboard. Raspberrypiis
a heart of the system. In this we has proposed a system
which will enable people to wirelessly transmit notices
board using Wi-Fi. Here we have proposed system by which
any authenticated person can handle the notice board. It
requires less time due to fast data transmission through Wi-
Fi, less cost and save resources. Design and implementation
pf digital notice board by using raspberry pi board. The
application has been installed on as smartphone and
raspberry pi card to display text on display device
Internet of Thing (IoT) -
An IoT ecosystem consist of web-enabled smart devicesthat
are use of embedded system, processors, sensor and
communication between hardware and software to collect,
send and act on data they acquire from their environments.
The IoT works with objects to be sensed or controlled
remotely across the existing network architecture. The
Internet of Things (IoT) can be described as connecting day
to day objects like mobile phone, internet, sensor and
actuators to the internet where the devices are linked
together.
In our system there are two parts is transmitter and
receiver.
Transmitter – Personal computer is used as a transmitter
part. Only the authorized PC is use here.
Receiver- It consists of following section.
Wi-Fi module – Wi-Fi was a high performance and cost
effective WLAN USB module. It connects the raspberry pi
mini cost credit card sized computer to a Wi-Fi local area
network. Wi-Fi is a technology for wireless local area
networking with devices based ontheIEEE802.11standard.
It supports data rate up to 150 mbps and it covers the area
ranges 20 meters LCD monitor.
It is a used display the notices or data of any from like text,
images, audio voices and multimedia etc. Wi-Fi will check
authorization of the user entry and raspberry pi card will
convert the messages that will be displayed into LCD
monitor.
Raspberry pi – The raspberry pi s a basic embedded system
having credit card-sized single board computers. pi is based
on the Broadcom BCM2835 system on a chip which includes
an ARM1176JZF-S Core 700mhz CPU processor, Broadcom
video core IV GPU having 17 pins,3.5W ofpowerand512MB
of RAM memory.
Speaker – speaker is also part of the receiver side, in our
system it is used to receive the audio or voice from the
transmitter side.
6. Block Diagram
Fig. A
Power
supply
Wi-Fi
Module
Android
App
Raspberry Pi
LCD
Speaker

7. Algorithm
8. Software Requirement
MQTT Dashboard - MQTT is a publish subscriber based
“lightweight” messaging protocol for use on top of the
TCP/IP protocol, such as the Wi-Fi packets that we are using
in the project. It is designing for connected with long
locations where network bandwidth is limited. The publish
subscribe messaging pattern requires message broker. The
broker is responsible for distributing messages to interest
clients based on the topic of a message.
Python - In contrast to other popular languages such
as C, C++Java, and C#. Python provide a simple but
powerful syntax. Python is used for software
development at companies and organization such as
google, yahoo, CERN, Industrial light and magic, and
NASA.
9. CONCLUSIONS
The purpose of the system to provide wireless notice
board that display message sent from the user and
receive, display notice is particular manner with
respect to date and time. They will be help to user to
easily keep the track ofnoticeboardeverydayandeach
time uses the system.
10. REFERENCE
1. ASIAN Journal of Applied Science and Technology
(AJAST) volume 1, Issue 1, pages 110-113, Feb 2017
www.ajast.net. Digital Notice Board In School And
Colleges By Implementing IoT with Audio Alert System:
C.Anitha l, M.Aruna2, S.Elavarasi3, V.Nandhini4 and
D.L.Jayanthi5.
2. International Journal of Scientific & Engineering
Research Volume 8, Issue 5, May -2017 1 ISSN 2229-
6090 www.IJCAT.org Digital Notice Boardusing
Raspberry Pi: Jadhav Vinod, 2 Nagwanshi Tejes, 3 Patil
Yogesh, and 4 Patil Deepak.
3. IoT BASed digital notice board Vishnu K.M.Lalkrishna
M.D, Mohammed Farshan V.T, Anu P M, Nivya Mariya
Francis Anooja B, Malabar College of Engineering &
Technology, Calicut University.
Raspberry Pi
Is the
sender’s not
authorized?
START
Initialize port
Enable LCD
Incoming message from
android app
He will not
send
Then user send the
message
END

IRJET- IoT Based Digital Notice Board Using Raspberry Pi with Audio Alert System

More Related Content

What's hot (20)

Similar to IRJET- IoT Based Digital Notice Board Using Raspberry Pi with Audio Alert System (20)

More from IRJET Journal (20)

Recently uploaded (20)

IRJET- IoT Based Digital Notice Board Using Raspberry Pi with Audio Alert System