IRJET - Mobile Application Base Voice Command Wireless CNC Writing Machine

International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 07 Issue: 02 | Feb 2020 www.irjet.net p-ISSN: 2395-0072
© 2020, IRJET | Impact Factor value: 7.34 | ISO 9001:2008 Certified Journal | Page 3110
Mobile Application Base Voice Command Wireless CNC Writing
Machine
Abhijit Ghule1, V. N. Mahawadiwar2, Pranali Meshram3, Yamini Manmode4,
Sauravi Bawankar5
1,3,4,5Student of K.D.K College of Engineering and Technology, Department of BE Electronic Engineering
2Professor of K.D.K College of Engineering and Technology, Department of BE Electronic Engineering
---------------------------------------------------------------------***----------------------------------------------------------------------
Abstract – In this paper voice mobile application base wireless CNC writing machine that interface with HC-05 Bluetooth and
microcontroller. CNC machines voice signal give mobile application and voice converted into text command and send into
paired HC-05 Bluetooth receiver through Arduino UNO already store g code file (generated with ink space software) are open
into micro SD CARD and send to the G-Codes file to next Arduino UNO both controller board (master and slave
communication) can proceed into G codes file according CNC machine. with the help of 2 scrape DVD/CD stepper motor joined
into 2 L298- motor driver controlling to (x- axis and y -axis) & servo motors connected pen movement controlling to (z- axis )
to draw the any text, pitchers or signature as per the fed program.
KEYWORD: HC- 05 Bluetooth, CNC machine, G-code, Arduino UNO
I.INTRODUCTION
Presentation Computer numerical control is an
progressed shape of delicate robotization created to
control the movement and operation of machine
apparatuses. Numerical control machine was concocted
around in 19th century to diminish work stack, it could
be a strategy in which the fabricating machine
employments coded arrange, digits and letters. Its
preferences incorporate tall proficiency, tall adaptability,
and tall generation rate, moo fetched of production. It
incorporates three fundamental steps that's accepting
information, translating information and in like manner
control activity. Based on extraordinary characters letter
codes and numbers a shape of program called portion
program (a successive instruction or coded commands
that coordinate particular machine work) is utilized for
naturally operation of a fabricating machine to create a
particular portion of particular measurement. The
program is at that point changed over into electrical flag
to nourish as input to engines that run the machine and
do the device developments. A machine control unit
(MCU) chooses the device profundity of c
II. OBJECTIVE
The targets of our venture is to plan and actualize a CNC
plotter machine which is able be able to draw any plan,
elevation, side sees of buildings additionally to draw
required pictures on the paper. Too, to create a moo
taken a toll programmed scaled down CNC plotter
machine for any drawing with decrease in taken a toll of
component together with the increment in adaptability
B. Strategy We have supply the current in Arduino with
USB Information cable to exchange information from
Computer to Arduino Board. Here we have Utilized 3
stepper Drivers to supply the G codes in grouping to the
more extreme engines. Arduino will be mounted on CNC
shield. CNC shield will be dispersing the Current within
the command of Arduino. CNC shield will be changing
over the command of G codes in advanced beat by
Stepper engine. In X direction stepper engine will be
move cleared out and Right, Ydirection stepper engine
will be move in front and back course, Z-direction
stepper engine will be move in up and down. We have
made numerous troublesome plan by means of utilizing
this machine. The exactness of these machines comes
about is exceptionally tall. So we have utilized in
industry to diminish the taken a toll of plan printing and
keep up exactness level. Drafting and Scaling of CNC
Plotter machine is exceptionally valuable.
III. HARDWARE
1. ARDUINO UNO ATMEGA328P
Fig 5.1Arduino Uno
The Uno could be a microcontroller board based on the
ATmega328P. It has 14 advanced input/output pins (of
which 6 can be utilized as PWM yields), 6 analog inputs,
a 16 MHz quartz gem, a USB association, a control jack,
an ICSP header and a reset button. It contains everything
required to bolster the microcontroller; essentially
interface it to a computer with a USB cable or control it

with a AC-to-DC connector or battery to induce begun.
Anybody can tinker with the UNO without stressing as
well much around doing something off-base, most
exceedingly bad case situation you'll supplant the chip
for some dollars and begin over once more. Uno implies
one in Italian and was chosen to stamp the discharge of
Arduino Program (IDE) 1.0. The Uno board and
adaptation 1.0 of Arduino Program L298 driver (IDE)
were the reference forms of Arduino, presently advanced
to more current discharges. The Uno board is the rst in a
arrangement of USB Arduino sheets, and the reference
show for the Arduino stage; for an
2. STEPPER MOTER
Fig 5.2Stepper Moter
A stepper engine may be a sort of DC engine which
includes a full revolution partitioned in an break even
with number of steps. It may be a sort of actuator
exceedingly consistent with numerical control implies,
because it is basically an electromechanical converter of
advanced driving forces into corresponding
development of its shaft, giving exact speed, position and
course control in an open-loop design, without requiring
encoders, end-of-line switches or other sorts of sensors
as customary electric engines require. he steps of a
stepper engine speak to discrete precise developments,
that take put in a progressive design and are rise to in
uprooting, when working accurately the number of steps
performed must be break even with to the control
motivations connected to the stages of the engine. The
ﬁnal position of the rotor is given by the entire precise
uprooting coming about from the number of steps
performed. This position is kept until a unused drive, or
arrangement of motivations, is connected.
3. SERVO MOTER
Fig 5.3 Servo Motor
A servo engine appeared in fig. Is utilized for the
development of portraying write in up and down in Z
course. This will offer assistance the CNC 2D sketcher to
point the write in A4 sheet and pulling back in front the
sheet to halt drawing
4. HC 05 BLUETOOTH
Fig 5.4 HC-05 Bluetooth
Within the venture the Bluetooth module utilized for
sending the G-codes to the plotter. HC-05 could be a
Bluetooth device used for remote communication. It
works on serial communication (UART). It may be a 6
stick module.
 The gadget can be utilized in 2 modes;
information mode and command mode.
 The information mode is utilized for information
exchange between gadgets though command
mode is utilized for changing the settings of the
Bluetooth module.
 AT commands are required in command mode.
 The module works on 5V or 3.3V. It has an on
board 5V to 3.3V controller.
B. L298 MOTOR SHIELD
L298 IC is a motor driver i integrated circuit shown in
fig. it is used to control the Stepper and servo motor
rotations in clockwise and anticlockwise directions. This
change in rotations help the sketcher to move in the
required three direction say, X, Y and Z axis directions
corresponding to left and right movement, front and
back movement and up and down movement
V. SOFTWARE & CODING
1. ARDUINO IDE
2. INKSCAPE
3.PROCESSING
1. AURDUINO IDE
The Arduino extend gives the Arduino coordinates
advancement environment (IDE), which could be a
cross-platform application composed within the
programming dialect Java. It begun from the IDE for the
dialects Handling and Wiring. It is planned to present
programming to craftsmen and other newcomers new
with program improvement. It incorporates a code
editor with highlights such as sentence structure
highlighting, brace coordinating, and programmed space,
and gives straightforward one-click instrument to
compile and stack programs to an Arduino board. A
program composed with the IDE for Arduino is called a
“sketch”. The Arduino IDE underpins the dialects C and
C++ utilizing uncommon rules to organize code. The
Arduino IDE supplies a computer program library called

Wiring from the Wiring venture, which gives numerous
common input and yield strategies. A ordinary Arduino
C/C++ portray comprises of two capacities that are
compiled and connected with a program stub
fundamental () into an executable cyclic official p
2. INK-SCAPE
A. INKSCAPE (Form 0.47) There are two fundamental
sorts of realistic pictures: bitmap (or raster) pictures and
vector pictures. Within the first case, the picture is
defined in terms of columns and columns of person
pixels, each with its claim color. Within the moment case,
the picture is defined in terms of lines, both straight and
bended. A single straight line is depicted in terms of its
two conclusion focuses.
B. INKSCAPE WINDOW Begin by opening Inkscape.
This window contains a few major ranges, numerous
containing clickable symbols or pull-down menus. The
taking after figure appears this window and names key
parts. As Inkscape has developed more complex, the
range required to incorporate symbols and section boxes
for all the different things has too developed driving to
issues when Inkscape is utilized on little screens. The
Command Bar, Snap Bar, Instrument Controls, and
Device Box have variable widths or statures. On the off
chance that there are as well numerous things to be
appeared within the width (stature) of
C. PROCESSING 3.3
Preparing could be a simple programming environment
that was made to create it less demanding to create
outwardly situated applications with an accentuation on
movement and giving clients with moment input through
interaction. The designers needed a implies to “sketch”
thoughts in code. As its capabilities have extended over
the past decade, Preparing has come to be utilized for
more progressed production-level work in expansion to
its outlining part. Initially built as a space- specific
expansion to Java focused on towards craftsmen and
architects, Handling has advanced into a full-blown plan
and prototyping apparatus utilized for large-scale
establishment work, movement design, and complex
data visualization. A Preparing program is called a
outline. The idea is to create Java-style programming feel
more like scripting, and embrace the method of scripting
to rapidly compose code. Outlines are put away within
the sketchbook, a organizer that’s utilized as the default
area for sparing all of your ventures. Outline
VI. FUTURE SCOP
IV. Piece Graph Scaled down CNC plotter machine is
worked on input as a G-codes of plan and changing over
it through Arduinio, Stepper Drivers, CNC Shield, Stepper
engine in to a turn of lead screw we have work on to
preserve most reduced fetched of our venture. We have
plan a basic construction on our venture typically less
demanding way to utilize Stepper engine with stack
screw, CNC Shield, Stepper Drivers, ardunio board, etc.
The setup of machine is adaptable that's why it'll be
effectively transported and support time is brief. The
essential chart of CNC Plotter machine is Appeared in
figure.
VIII. CONCLUSION
A CNC Machine is utilized for Cutting, Composing, edge
Penetrating and Directing of essentially any materials for
any reason and it are regularly utilized for any extend. As
per result we are ready to total theoretical a remote
communication base CNC scaled down plotter machine
backed package and equipment for fashion, numeric, and
signature. The remote base CNC scaled down plotter is
AN inserted framework that works on the run the show
on pc numeric administration (CNC).
References
1. “Wireless Base CNC Mini Plotter Three Axis Control Machine” Ghulam Dastgeer, Muhammad Asad, Saad. S.S. Ali
[2018]
2. “Modelling Of Portable CNC Plotter Machine/3d Printer” Tarun Kanti Pal ,dipak Kumer[2011]3D Printing Process
Using Fused
3. Deposition Modelling (FDM)”Vinod G. Surange1, Punit V. Gharat2 1Assistant Professor, Department Of
Mechanical Engineering, SJCET, Palghar (MH) Lecturer, Department Of Mechanical Engineering, SJCET, Palghar
(MH) [2016]

4. “Arduino Based Cost Effective CNC Plotter Machine” 1Puja Girhe” 2Shubham Yenkar,3. Arpita Chirde[2018]
5. “Low Cost Computer Numeric Controller Using Open Source Software and Hardware”. Muhammad Yaqoob Javed,
Sayyad Tahir Hussain Rizvi, M. Amer Saeed, Kamran Abid, Osama Bin Naeem, Adeel Ahmad, Kamal Shahid [2015]

IRJET - Mobile Application Base Voice Command Wireless CNC Writing Machine

More Related Content

What's hot (20)

Similar to IRJET - Mobile Application Base Voice Command Wireless CNC Writing Machine (20)

More from IRJET Journal (20)

Recently uploaded (20)

IRJET - Mobile Application Base Voice Command Wireless CNC Writing Machine