IRJET- Oranges Sorting using Arduino Microcontroller

International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 06 Issue: 02 | Feb 2019 www.irjet.net p-ISSN: 2395-0072
© 2019, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 1800
ORANGES SORTING USING ARDUINO MICROCONTROLLER
(A Review)
Vikas Chakole1, Pranay Ilamkar2, Rupesh Gajbhiye3, Suhas Nagrale4
1,2,3,4Department of Computer science & Engineering, Nagpur Institute of Technology, Nagpur
RTM Nagpur University, Nagpur, Maharashtra, India
---------------------------------------------------------------------***----------------------------------------------------------------------
Abstract - In Agriculture industry is highly increasing
demands for automation. Sorting of Oranges fruits based on
color and size is complicated task. The technique associate
with these work and implementation feasibilities are the
fundamental studies. Varity of techniques are available for
these tasks, along with their implementation plan. The main
purpose of this paper is given us idea about such technique to
identify performance-oriented technique. Few techniquesand
their implementation plan are discussed in this paper.
Key Words: Color based sorting, TCS3200 color sensor,
ultrasonic sensor, servo motor, Oranges, Arduino Nano.
1. INTRODUCTION
Now a day’s farmer wants high accuracy andperformancein
their product like Orange sorting. Color and Sizeisoneofthe
best parameters on which we can sort different colorful
Oranges at marketing and industry level. Color and size are
the most important features for accurate classification and
sorting of Oranges fruits. When the Orange sorting situation
where human work repeatedly and contains the same
process, every cycle has an ability to give uneven result. In
the future the wide range of that kind of application can be
improved by using the robot. A robot work gives the
effective result rather thanhumanwork.Robotcanwork day
and night, compared to humans who need sleep and breaks.
One kind of task of task which a robot would be able to
perform is sorting colorful oranges. Into the categories for
instance by color, shape or size. This is however, in this
paper a review is done on color soring technique.
2. MOTIVATION
Robot is technology that deal with the design, construction
and operation of robots that are used in numerous
applications is called robotics. Robot is a modern machinery
as they make life easier. With this fascination itmotivated us
to work on this project, buildingandprogramminga Oranges
sorting system. To learn and attain knowledge thatdrivesus
towards this field of study our projects.
3. LITERATURE SURVEY
This content presents the critical analysis of the existing
literature which is relevant to the Orange sorting system.
Though, the literature consists of a lot many research
contributions, but here, we have analyses some of the
research and review papers. Finally, the finding of
summarized data to related the scanned and analyzed
research papers.
Snehal Shirgave [1] in theirpaper explainaboutcolorsorting
robot. This system consists of color sensor module, servo
motor, Arduino UNO and LCD display. TCS3200 is the color
sensor which detect light reflected light by an object and
convert it into frequency. Servo motor are used to move a
slider according to the color detected. Input and output
operations are controlled by an Arduino UNO
microcontroller. Detected output color and the count value
of respective colored Object is displayed on LCD.
Rudresh.H. G and Prof. Shubha.P [2] this paper stated that
the project deal with an automatic material handlingsystem.
This project purposed organizing the colored object which
are approaching on the conveyor by picking and placing the
objects in its separate located place. There by reducing the
tedious work done human accomplishing accuracy and
rapidity in the work. The project includes color sensors that
senses the object color and lead the signal to the controller
guides signal to the motor driving circuit which drives the
different motor of the robotic arm to understand the object
and place it in the correct location. Depending upon the
colored sensed the robotic arm goes to the correct location
to releases the object and come back to the initial position.
Real Time Industrial Color Shape and Size Detection System
Using Signal Board by Geda. Karthik KumarandS.Kayalvizhi
[3] in their paper introduce a project about the detection of
color, shape and size of various object at real time. The
design of system is accomplished using a raspberry pi as a
system of an chip, along with camera, display unit and
mechanism such as conveyor belt use for the transport of
object in the industrial environment. The main purpose of
design of this particular system is to identifythecolor,shape
and size as well as the number of objects moving with the
help of conveyor belt.
Tushar G. Gaikar and his team [4] in their paper stated that
the complete architecture of object sorting using color
sensor and Arduino. Color sensor detect the color and gives
serial output of RGB value to the Arduino microcontroller.
Microcontroller read that value and decide color and gives
output the voice recorder as well as LCD to display thecolor.
Voice recorder record the color name and after getting

command from microcontroller it generates audio output
through speaker.
Akriti Kaushik and Aastha Sharama [5]intheirpaper explain
about color sensor. Color sensor register stuff by contrast,
true color, or clear index. True color sensors are based on
the one of the color models, most commonly the RGB model
(red, green, blue). A large percentage of the visible color can
be created using these three-primary colors. In this paper
will be focusing on the application of color sensor using
conveyor system for sorting RGB color.
www.rapidtables.com/web/color/RGB_Color.html [6] in this
website stated that RGB color space or RGB color system
construct all the color from the combination of the Red,
Green, and Blue colors. The red, green, and blue use 8 bit
each, which have integer value from 0 to 225.
This makes 256*256*256=16777216 possible colors. RGB=
Red, Green, Blue
RGB color format & calculation
RGB code has 24-bit format (bit 0….23):
RED GREEN BLUE
23 16 15 8 7 0
RGB = (R * 6 5 5 3 6) + (G * 2 5 6) + B
(When R is RED. G is GREEN and B is BLUE)
Automated color sensor system using LDR and RGB LEDS
controlled using Arduino by Ahmad Amhani and Zaki Iqbal
[7] in their stated that to create a color sensor system that
has the good efficiency and low cost. The system is
developed to detect ten different colors and differentiate
between them. It has been implemented as a breadboard
using LEDs, an LDR, Op Amps and an Arduino UNO. This
paper will be explaining the component, working principal,
connection, calculation, result and the errors.
Fayaz Shahdib & his team [8] propose another way of
obstacle detection and object measurement using sensor.
Sensor fusion is particularly applicable for movable robots
for object detection and navigation. The technique that have
been developed so far for detecting an obstacle are costly.
Hence this paper proposed a new technique which can
detect an obstacle, judge its distance and measure the size of
the obstacle using one camera and one ultrasonic sensor.
The technique is cheap in term of sensor cost and in term of
computational cost.
In the paper of color sensor-based object sortingrobotusing
embedded system [9] is information that to sort colorobject
with a robotic arm. They have a robotic arm which picks
different colored cubes and sorts them placing in different
cups. The detection of the particular color is done by a to
frequency converter and light intensity method. The robotic
is controlled by a microcontroller-based system which
controls DC servo motor.
Kunhimohammad C. K, [10] in their paper states that a
working prototype designed for automatic sorting of object
based on the color. TCS230 sensor was used to detect the
color of the product and the PIC16F628 microcontroller was
used to controlled the overall process. The identification of
the color based on the frequency analysis of the output of
TCS230 sensor.
4. CONCLUSION
This paper provides survey on various techniques involved
on color sorting and shapeandsizedetectionsystem.Variety
of literature is available for the study of size, shape and
color-based sorting technique. A few strategies between in
this paper which are selected on thebasisofimplementation
technologies used. This paper supportforunderstanding the
essential needs for designing color sorting, shape and size
detection robot and planning its implementation strategies.
REFERENCES
1. Akriti Kaushik, Aastha Sharma “RGB Color Sensing
Technique” international journal of advance
research and engineering vol no 2 September 2013
2. Kunhimohammed C.K, Sahna S, Gokul M.S
“Automatic Color Sorting Machine Using TCS230
Color Sensor and PIC Microcontroller”.
International general ofresearchandinnovationsin
science and technology 2015.
3. Tushar G. Gaikar, Soham N. Zadokar, Rajendra S.
Bhandari, “Object Sorting Using Sensor and
Ardunio” International journal of computer and
communication vol.4 2015
4. Dhanoj M1, Reshma K V2, Sheeba V3, Marymol P4,”
Color Sensor Based Object Sorting Robot Using
Embedded System”. Vol 4, April 2015
5. Snehal shirgave, aishwrya salunke, S. Y. Upadhye.
“Color sorting robot”. International journal of
Advance Research in tele Communication engg.
March 2017.
6. Rudresh H.G. Prof. Shubha P. “Color Sensors Based
ObjectSortingRobot”International researchjournal
of engineering and technology. Aug 2017
7. Umesh A. Chatte,utkarsha kadam,vikaramkhupase,
sanket mane, pooja kharat “Ardunio based object
sorting” international journal of innovation in
engineering research and technology, ISSN: 2394-
3696 march 2018
8. Li qiaoyi “study on color Analyzer Based on The
Multiplexing of TCS3200 Color Sensor and
Microcontroller” ijhit vol 7 2018
9. Ahmad Amhani and Zaki Iqbal “Automaed Color
Sensor System Using LDR and RGB LEDS Controlled

by Arduino” ARPN Journal of Engineering and
Applied Science 2018
10. Fayaz Shahid, Md. Wali Ullah Bhuiyan, Md. Kamrul
Hasan “Obstacle Detection and Object Size
Measurement for Automatic Mobile Robot using
Sensors” international journal of innovation in
engineering research and technology 2018
WEBSITES VISITED
[W1] https://www.rapidtables.com/web/color/RGB_Color.
html
[W2] https://howtomechatronics.com
[W3] https://robokits.co.in/sensors/color-
sensor/tcs3200-based-color-sensor-module

IRJET- Oranges Sorting using Arduino Microcontroller

More Related Content

What's hot (8)

Similar to IRJET- Oranges Sorting using Arduino Microcontroller (20)

More from IRJET Journal (20)

Recently uploaded (20)

IRJET- Oranges Sorting using Arduino Microcontroller