IRJET-Smart Roads using IoT Devices.

International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 05 Issue: 06 | June-2018 www.irjet.net p-ISSN: 2395-0072
© 2018, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 1526
Smart Roads Using IOT Devices
Aftab Mansoori1, Chetna Achar2
1 Student, Mumbai Educational Trust, India
2 Professor, Chetna Achar, Mumbai Educational Trust, India.
---------------------------------------------------------------------***---------------------------------------------------------------------
Abstract - A smart roads using IOT devices is a special idea
which makes the drivers to drive safer than before .The first
motive of smart road is to provide safety, use less amount of
electricity and reduce traffic. This can be implemented by
using advanced technologies like Light Sensors, Ultrasonic
Sensors, Camera, Motion Sensors, IOT Devices, Interactive
Lighting System, The solar roadways, Glow in the Night, The
wind powered light System & The electric prioritylane. Traffic
is a growing problem in India causing fuel wastage, time
wastage & pollution. In Indian road-traffic, the problems like
crowded roads, unpredictable time to travel from one place to
another are a serious problems which is also polluted and
noisy. Now, researchers have started to introduce connected
vehicle technology which is difficult to implement on roads. In
this project, we present a low cost innovative technology for
smart roads. The wastage of electricity from street lights can
be minimized by using the motion sensors and light sensors
due to which the loss of electricity can be prevented. Different
technologies have been introduced to reduce traffic jams.
Key Words: Ultrasonic Sensors, Light Sensors, Motion
Sensors, Camera, IOT Devices, Glow in the Dark,
Interactive LightingSystem,and Thewind poweredlight
System, The electric priority lane, the solar roadways.
1. INTRODUCTION
Nowadays traffic has becomea majorproblemforthepeople
in India. Due to which it causes wastageofprecioustime,fuel
and electricity. The Internet of things (IoT) is thenetwork of
electrical appliances, vehicles, physical devices and other
items embedded with electronics,
actuators , sensors, software,and connectivity whichenables
all these objects to connect and exchange data. Each thing is
uniquely identifiable through its embedded computing
system but is able to inter-operate within the
existing Internet infrastructure.
The Raspberry Pi is a series of small single-board
computers developed in the United Kingdom by
the Raspberry Pi Foundation to promote the teaching of
basic computer science in schools and in developing
countries [1]. The original model became far more popular
than anticipated, selling outside its target market for uses
such as robotics. It does not include peripherals (such
as keyboards, mice and cases). However, some accessories
have been included in several official and unofficial bundles
[2]. Raspberry pi camera module can be used to take HD
videos, as well as stills images. It’s easy to use for beginners
but has plenty to offer advanced users if we are looking to
expand our knowledge. There are lots of examples online of
people using it for slow-motion, time-lapse and other video
cleverness. We can also use the libraries we bundle with the
camera to create effects.
2. LITERATE SURVEY
A Report on Road Accidents in India 2016, published by
Transport Research wing under Ministry of Road Transport
& Highways, Government of India, has revealed that more
people died on roads accidents in India last year, as
compared to the number of deaths in 2015. The data has
further revealed that the states of Uttar Pradesh and Tamil
Nadu have accounted for maximum number of deaths this
year. [3]
As per the data cited in the report, the country recorded at
least 4, 80,652 accidents in 2016,leadingto1,50,785deaths.
The number suggests that at least 413 people diedeveryday
in 1,317 road accidents. Further breaking down the
statistics, the data reveals that at least 17 deaths occurredin
road accidents in 55 accidents every hour in the given time
period. Comparing the new recordings with data from

previous year shows that in spite of recording fewer
accidents in 2016, more deaths have occurred this year asin
2015. In 2015, 1, 46,133 people had died in 5, 01,423
accidents. The accident severity, which is measured as the
number of persons killed per 100 accidents, wasrecorded at
29.1 in 2015 which is lower than 31.4 in 2016.
The country loses Rs. 60,000 crore a year due to congestion
(including fuel wastage), slow speed of freight vehicles and
waiting time at toll plazas and checking points, a study on
operational efficiencies of freight transportation by roads
has claimed.
It said vehicles crawl at an average speed of less than 20
kmph on some key corridors such as Mumbai-Chennai,
Delhi-Chennai and Delhi-Guwahati while it's only 21.35
kmph on Delhi-Mumbai stretch.
The Transport Corporation of India and IIM(Calcutta)study
said while India's freight volume was increasing at a
compounded annual growth rateof9.08%andvehicles were
growing at 10.76%, the road length was increasing at only
4.01%. This has resulted paucity of road space to
accommodate vehicles and to increase the speed. [3]
3. PROBLEM DEFINITION.
In India we see traffic junction, we can see traffic signals
with red, yellow and green lights along with the timer
display. To move the traffic has to wait for a fixed interval of
time. [4] For example, people have to wait for a small
interval of time which is fixed for every signal even though
the traffic is more in that particular lane. [5] This leads to a
huge “TRAFFIC JAM” which is a major problem now a days –
the society is facing. Another problem that people face in
India is “LACK OF ELECTRICITY”. Street lights are always
glowing at night. For example, even if no vehicles are
moving on roads at night, street lights are always glowing
which is actually not necessary. Inappropriate use of street
lights, electricity is usedunnecessarilywhichisa “WASTE OF
ELECTRICITY”.
4. EXISTING SYSTEM
The individual traffic signals are connected with traffic
control system to perform network wide traffic operation.
These control systems contain a central computer, a
communication network, and intersection traffic signals.
Coordination of control system can beimplementedthrough
different techniques like time-base, hardwired
interconnection method. Coordination between traffic
signals and agencies requires the development of data
sharing and traffic signal control agreements.Atraffic-signal
system has only one purpose i.e. to deliver signal timings to
the driver. The system provides features that improve the
traffic engineer’s ability to achieve this goal. These are
primarily access features. They provide access to the
intersection signal controller for maintenance and
operations. The more complete and convenient the access,
the more efficient the operator will beandthemoreeffective
the system. In addition to control the traffic signals, modern
technology also provide surveillance capabilities, including
different kinds of video surveillance andtrafficdetection. [6]
5. PROPOSED SYSTEM
Despite of the innovation made to the mobiles, vehicles etc.
we see less developments to the roads. There are several
work that can be done on the roads which will help in
inventing new technologies and reconstructing the driving
experience when it comes to road safety. The masterminds
in this sector are trying hard to improve driving experience
by innovating various ideas like to use roads to store solar
energy from the sun directly and transfer that energy into
electricity for homes. [7]
When there is a huge traffic on the one lane of the traffic
signal, it should be cleared as soon as possible. But in our
existing traffic system, the driver should waituntil theirturn
comes even if there is a huge traffic in thatparticularlane.To
avoid this we can provide sensor which are capable of
analyzing the traffic intensity. These sensors can be used to
clear the traffic as soon as possible before causing a traffic
jam.
In this new system, sensors are used to prevent loss of
electricity by the unnecessary usage of street lights at night.
At nights street lights are switched ‘ON’ even if there are
zero vehicles on road. So, in order to overcome this, sensors
are used for street lights and when a vehicle passes through
the sensors, the street light will be switched ‘ON’ and when
the vehicle passes through that street light, the upcoming
street light will be switched ‘ON’ automatically and all the
foregoing lights are switched ‘OFF’ as the vehicle has passed
through that light. This is continued throughout the street
thereby saving the energy. Ultrasonic sensors are used to
detect the traffic which gives a signal to RASPBERRY PI 3
about the traffic and this will be able to clear the traffic.
Camera module installed on road is used to detect the
vehicles that are not following the traffic rules.
5.1 MINIMIZING ELECTRICITY USAGE
1. Glow in the Dark:
In the recent scenario, we see a large amount of money is
spend on the road lighting system across lakhs of miles,

instead of spending on lights there is an innovative idea to
use the markings which will glow at night which is an
excellent alternative. These markings are already used in
smart roads in an N329 highway, Netherland. The markings
on roads are made using the color which consists of photo
illumining powder that charges up during the day. There are
green glowing markings stretched for 1000m long and will
shine for more than 7 hours every night and it will give us
the excellent driving experience.
2. Interactive Lighting system:
Other than glow at night paint, there is also an innovative
idea to make use of the motion sensors lights. These lights
work as follows: when any vehicle moves through a
particular lane of a road, the motion sensors will brighten
only that lane of the road. The light will glow brighter as the
car comes closer and will slowly become weaker as it moves
away.
The lighting system is an innovative idea for the highways
that are less used or not always traffic jammed. It provides
the night visibility as and when needed without any
electricity wastage, and it provides safety whiletravellingon
such roads.
3. The Wind-Powered Light System:
Another innovative idea is that in which the wind-powered
lights are used to power up itself using the pinwheels to
generate the electricity. Now this electricity will be used to
light up the lights on the pinwheels, which will ultimately
lighting up the roads. The wind is used to power up the
lights. These wind-powered lights will only illuminate as
vehicles pass by the area. The pinwheels are set along the
vehicles path at the road so that it continuously light up the
paths as the vehicles pass by.
4. The Electric Priority Lane:
Another fascinating idea is to build the smart road is electric
priority lane the electric vehicles can charge up their bettery
by just driving on the right lane. The roads will have
magnetic fields that can charge the vehicles on the go. This
concept is useful in the countries where there are many
electric vehicles on the road ensures that the electric
vehicles do not require charging stations on the go and can
even keep their vehicles charged for the long journeys.
5. The Solar Roadways:
As mentioned in the introduction about the roads that can
reserve solar energy. It is an indiegogo projectswhichwants
to install the solar panels on the roads which are made of
glass with microprocessors and LEDs. The need for glass
roads as? As glass can restoreitsenvironmental friendlyand
its strength can be improved.
The roads are no more a midway just loco mote from one
place to another .Smart Roads allows us to charge vehicles
and utilize the energy in an effective way. With the
technological enhancement in every field, roads are not

behind. There will be more future enhancement that adds
good experience and make our roads smart and safe to
travel.
6. CONCLUSION
Road traffic and congestion is a huge problem in most of the
developing countries like India, China, and Bangladesh etc.
Most cities have poor traffic networks with several traffic
systems. In this paper, we study the problem of road traffic
and congestion in developing regions.Ultrasonic sensorsare
used to specify the strength of the vehicles which sends
signals to RASPBERRY PI3 about the traffic. We hope that
these mechanisms are easier to deploy in real-world.
We believe that this representation is just a first step in the
development of low-cost strategies for reducing congestion
in the developing regions. The future work is to generate
electricity by evolving smart speed breakers on roads. We
can implement charging the electric vehicles on the traffic
signals by using induction coil. The paper discusseda means
to detect and decrease the congestion on roads.
Although, the smart roads are effective for traffic, it is still
not be able to reduce the traffic and congestion due to the
localized focus approach.
Roads are now not used only for traveling from one place to
another. We can use these roads to charge electric cars and
solar energy due to large surface area. Hopefully there will
be more future technology to makeourroadssmartandsafe.
7. ACKNOWLEDGEMENT
The acknowledgement is a small attempt to explicit my
gratitude to all the ones who've assisted us at some point of
the route of making ready this paper. I'm significantly
indebted to explicit giant delight and sense of gratitude
towards to my manual and mentor prof. Chetna Achar for
her consistent help and valuable encouragement.
REFERENCES
[1] Muscio97 edited this page on May 24, 2017 · 4 revisions
[2] Subbir Bhusari,”Traffic control systemusingRaspberry-
pi”, Global journal of Advanced Engineering
Technologies ISSN(Online), Volume 4, Issue 4-2015, pp
413-415.
[3] Road accidents in India, 2016: 17 deaths on roads every
hour, Chennai and Delhi most dangerous By: Express
Web Desk | New Delhi | Updated: September 11, 2017
10:04:42 am
[4] K.Vidhya, A.Bazila Banu, “Density Based Traffic Signal
System”, International Journal of Innovative Research
in Science, Engineering and Technology, Volume 3,
Special Issue 3, March 2014, pp 2218 – 2223.
[5] S.Lokesh, “An Adaptive Traffic Control System Using
Raspberry PI”, International journal of engineering
sciences & research Technology, IEEE conference June
2014, pp 831-835.
[6] Dietmar P. F. Möller, “Cyber-Physical Smart Traffic
Light System”, Clausthal University of
Technology,Institute of Applied Stochastics and
Operations Research, IEEE 2015, pp 546-551
[7] NIBT - Smart Highways | smart roads | smart highway
system
https://nibt.education/technology_details/Smart-
Highways

IRJET-Smart Roads using IoT Devices.

More Related Content

What's hot (20)

Similar to IRJET-Smart Roads using IoT Devices. (20)

More from IRJET Journal (20)

Recently uploaded (20)

IRJET-Smart Roads using IoT Devices.