ITD ASSIGNMENT 2 BRIEF
- 1. 1 SCHOOL OF ARCHITECTURE, BUILDING & DESIGN Research Unit for Modern Architecture Studies in Southeast Asia Foundation of Natural Build Environment (FNBE) INTRO TO DESIGN - ARC30205 Prerequisite: None Lecturers: Ms Shazreene Shamsuddin, Ms Normah Sulaiman, Mr Paul Nickson Atia PROJECT 2 The Lego Miniature – Hanging Mobile Display Project 2A - group 15% - 6th January 2016* Assignment 2B (i) - individual 10% - 12th 13th January 2016* Project 2B (ii) - individual 25% - 3rd February 2016* *subject to changes with notice Introduction The aim of Project Two is for the students to explore the transformation from 2D elements to 3D form. The first part, students will be playing with the shapes, forms, and materials and transforming it into a 3D geometric abstract art piece to suit a certain given word. Students are required to explore the given words and translate it into “design elements” and then using design principles to transform it into a 3D geometric art work. The end product will be a 3D artwork that instantly reflects the given word. In the second part of this project, individually student will create a 3D hanging mobile display for their Lego miniature toy implementing the design elements and principles. This hanging mobile display will be supported by presentation boards. Objectives of Project The objectives of this project; 1. To form a comprehensive understanding of the basic principles, elements and design process at an appropriate level. 2. To apply skills and basic knowledge acquired to a range of assignments, to which they will be required to deliver visual and verbal reports, production of presentation, observation, and gathering of information. Learning Outcomes of this Project On successful completion of this subject, students will be able to demonstrate the following: 1. To be able to explain the application of basic design elements and design principles in simple projects. 2. To be familiar with the design process, investigation, observation and interpretation in simple projects.
- 2. 2 Tasks - Methodology PART 2A – 3D EXPLORATION – group work 15% This is a group project and it requires the students to follow the following instructions and schedule. The main task is to translate the given word into shapes and forms and using the right design principles into 3D form. Firstly, students will need to understand thoroughly and explore the given word. Then they will need to go through 3-4 stages of transformation that will be executed during tutorial class. The 1st process is to develop the 2D elements such as simple geometric shapes that best reflect the given word as drawings and eventually extrude it as planes using model boards. The second stage, the best 2D ideas from the first stage will then go through a 3D process using dry polystyrene and brown cardboard box. The 3rd stage students are required to use different type of materials of their choice to make the selected 3D that best reflects the word. Please refer to the weekly instructions. For the final submission and presentation, students are required to produce the “FINAL 3D MODEL” that best reflect the given word combining or selecting the best method and materials that has been explored during the tutorial sessions. This model should be in a hanging format like a hanging mobile. Furthermore, students are also required to prepare some simple explanation boards. Please refer to the given guidelines for the final presentation and submission. Randomly students will be given one of these words; 1. CONVERT 2. INTENSIFY 3. EVOLVE 4. DISTURBED 5. DIMINISH 6. TRANSMISSION Please follow this weekly schedule; WEEK 11 8/12 & 9/12 Preparation -tutorial a. In groups, students are required to understand and explore the meaning of the given word. After group discussion and brain storming, students are required to prepare mind maps, definitions, images to support the word and as inspirations for the next part. (Do whatever it takes to understand and to explain the word). Do it on A4 size paper b. Do a quick research about the architect which is your group name. Collect photos of building that he designed and select those that could represent/relate to your word. Try to understand the material and techniques or his design principles when designing a building. Present this information during tutorial together with (a) c. Next students are required to prepare 2D drawings explorations on A4 size tracing papers overlay on top of grid paper for each category stated below. These 2D drawings are translation of the meaning of the given word in simple design elements such as lines and shapes. This is what you are required to draw to translate the given words into elements of design; 1. Translate the meaning or actions of the word into LINES or DOTS 2. Translate the meaning or actions of the word using one type of shape. (each can be one different type of shape) 3. Translate the meaning of the words using element and styles from your architect’s building designs. Minimum 3 drawings for all design (total minimum is 9 drawings)
- 3. 3 Prepare all this items and present it after lecture session the following week WEEK 12 15/12 & 16/12 SESSION A - After lecture Everyone has to pin up all at the same time. You will present all the items as mention above (Preparation for tutorial) and from there we will choose a few drawings for you to translate into 3D planes model for SESSION B. SESSION B – tutorial session We will treat all tutorial session like a workshop. Everyone has to attend the tutorial session on time. It will be like a directed workshop and we will do things in sequence therefore it is important everyone should be in the classroom on time. Students are required to make a 3D plane models base on the art work from SESSION A using model boards on an A4 size sandwich foam board as the base. Minimum one different models for each categories as follows; a. Model derive from the lines or dots drawings b. Model derive from the shape drawings c. Model derives from your architect buildings. d. Model derive from new ideas or inspiration (optional) The model produced based on assigned word somehow should relate to the architect’s style (your assigned architect). Students are required to do this in class and finish it in class. You are required to bring your own stationaries, butter paper, grid paper, uhu glue, masking tape, compass,ruler, cutting mat, plastic bag for rubbish, and boxes to keep safe your models. SEM BREAK 22/12 & 23/12 SESSION C (homework) In groups you are required to transform those simple 2D planes models into solid 3D forms using thick polystyrene boards, brown cardboard box and mixture of both of them. Minimum one different model for each categories as follows; (A4 size sandwich foam board as the base) a. Model using polystyrene only b. Model using brown cardboard box only c. Model using both polystyrene and brown cardboard box together All minimum 3 models could be in different style of arrangements or elements. It does not have to be based from the models in SESSION B. The model produced based on assigned word somehow should relate to the architect’s style (your assigned architect). Since you are doing this as a homework during the semester break, every group need to upload the models photos on FB group at the same day of tutorial sessions. Some might go back to their hometown, so please manage your grpwork WEEK 13 29/12 & 30/12 SESSION D From Session C, you are required to use any materials to make the 3d model
- 4. 4 based on the word and we would like to see the different types of models as follows; a. Model using one type of your selected material b. Model using a few types of your selected materials (max 3 materials) c. Model using combination of materials in session B and C (max 3 materials) The model produced based on assigned word somehow should relate to the architect’s style (your assigned architect). Students are also required to come up with draft of presentation boards WEEK 14 6/1/2015 PRESENTATION Students are required to present the best model that best represents their word (max 3 materials). This model needs to be hanging like a mobile. To support this presentation, students are required to prepare a simple presentation board. Please refer to the requirements and diagrams of the presentation required. Submission Requirement PART 2A – Submission Week 14 – 6th January 2016* The abstract models should start from regular and irregular geometric shapes. Use the grids to help you create these new shapes and arrangements. You will need to use basic shapes to get organic shapes. The model and drawings should not look like any human or animals figure or features, logo, symbols, fonts or any other graphic images or characters. It should only be about the meaning or action of the word. You do not need to create any new concept or any story line. The idea is to create a model that reflects the word using simple shape and forms. The final model should NOT be more than 400mm wide and 600mm in length. Minimum size is 300mm wide and 500mm in length. You may use any material to hang the model. You may colour the final model maximum 3 colours. Choose and plan wisely how you want to colour the model. Please seek advice from your tutors. Please take pictures of the process for portfolio purposes. Each group will need to give a verbal presentation about their work. Not more than 5 minutes. The presentation boards should explain about the process of transformation, the elements used and the materials used. All should be hand drawn and hand written with ARCHITECTURAL HANDWRITING! Avoid writing long sentences and paragraph. Use diagrams to explain. You may use any type of media to prepare the drawings and diagrams, and strictly no digitalized. You may use any kind of paper for the presentation explanation however the layout, size and base please refer to FIGURE 01 on the last page Tips: Please refer to the DK Ching book for presentation layouts and preparation. All sketches, doodles, research, planning, discussion to be place in the portfolio. It’s the responsibility of every student to make sure they record the process and final product of their work.
- 5. 5 Assessment criteria The assessment for this assignment will be based on your Demonstrated understanding of design concept/ideas, design process, design element, design principles, composition, transformation of 3D forms and how it is being applied to the presentation boards and the hanging mobile display. (and progress) Originality, creativity, aesthetic value and workmanship quality of the model, the 3D hanging mobile display, presentation boards design and layout, drawings, graphics, diagrams and overall presentation. Clarity, depth of content, the use of diagrams and the use of design vocabularies of the explanation and descriptions. Marking criteria PART 2A – 15% Demonstrated understanding of design concept/ideas, design process, design element, design principles, composition, transformation of 3D forms and how it is being applied to the presentation boards, the hanging model and the word. (and progress) 30% Originality, creativity, aesthetic value and workmanship quality of the model, the 3D hanging mobile display, presentation boards design and layout, drawings, graphics, diagrams and overall presentation. 50% Clarity, depth of content, the use of diagrams and the use of design vocabularies to explain and describe the process and ideas. 20% TOTAL: 100% NOTE: PLEASE BE INFORMED THAT INVIDUAL COMPONENTS IN GROUP WORKS IS EVALUATED BASED ON PEER EVALUATION AND INSTRUCTUR’S EVALUATION ON INDIVIDUAL PERFORMANCE OF A GROUP MEMBER. Suggested References 1. 3D Design Principles - http://faculty.wwu.edu/schadeb/dsgn250/website/images/DSGN250_3ddesignprinciples.pdf 2. The Elements and Principles of Three-Dimensional Design http://www.bishoplynch.org/document.doc?id=2466 3. Elements & Principles of Three-Dimensional Design https://prezi.com/ycic1ym0w8oc/elements-principles-of-three-dimensional-design/ 4. THREE DIMENSIONAL ELEMENTS AND PRINCIPLES OF ORDER: https://passart.wordpress.com/sculpture/3d-design-elements-and-principles-of-design/ 5. ART 314 - 3D Visual Principles http://newmediaabington.pbworks.com/w/page/29319669/ART%20314%20-%203D%20Visual%20Principles
- 6. 6
- 7. 7
- 8. 8 Tasks - Methodology PART 2B(i) – DESIGN PROCESS – Individual 10% Individually, students are required to prepare and develop sketches of ideas and research about their Lego miniatures. The student’s tasks are divided into 2 parts and are detailed as follows; 1. INVESTIGATION & EXPLORATION Students are required to do a thorough research on their Lego miniature toy character and tabulate all important information (toy characters/personalities, physical attributes, abilities/weakness background history, toy size and description and etc) To conclude their findings, students are required to create a Magazine Cover (hard cover page) that feature the toy character. 2. TRANSFORMATION & EXPLORATION Students are required to select 2-3 verb/adjective keywords (based on character/personality) and for each keyword students are required to transform and translate it to design elements and principles such as lines, shapes and forms. For each key word ideas, students will then have to create a 2d geometric abstract art work (collage) to conclude their exploration and understanding. Submission & Requirements This is an individual assignment. Students are required to follow the instructions stated in this brief: Students required to do it on A3 size drawing papers (minimum page 5) The A3 size papers should be binded or attached together as a booklet with front and back hardcover. All documentation must be hand written and hand drawn. Minimal printed images are allowed (inspiration or references) – not more than 20% - Architecture handwriting The submitted work should be more like visual note taking style or mind mapping. Students should produce diagrams, doodles and sketches. Students may use pencil colours or coloured pens etc. Student must SCAN their work before submission for portfolio purposes. Write your name, student ID, Taylor’s logo and intake at the back of the booklet (print out) Student to attach assessment sheet together with the booklet Assessment & Marking Criteria The assessment and marking for this assignment will be based on your: Demonstrate understanding of each task & clarity of the idea process (meeting the requirements) Importance, depth and appropriateness of content related to the toy character (substance) Originality, creativity and workmanship of the final outcome of each task (delivery) TOTAL 10% Suggested References These are just some links to inspire you; 1. All about Learning. Design Thinking https://www.youtube.com/watch?v=3sOeSkTUTA0 2. Architectural Concept & Design Process https://www.youtube.com/watch?v=aPUzUXfGWBQ 3. DISCOVER DESIGN: A Student Design Experience http://discoverdesign.org/design/process 4. 5 Types of Architecture Design Process http://www.slideshare.net/dotm/5-type-of-architecture-design-process-by-wanmuhammad?related=1 5. Generating Architectural Concepts & Design Ideas http://www.slideshare.net/dotm/generating-architectural-concepts-design-ideas 6. The Importance of Diagrams http://blog.buildllc.com/2011/02/the-importance-of-diagrams/
- 9. 9 PART 2B(ii) – HANGING MOBILE DISPLAY – individual work 25% Individually students are required to apply the process that they have learnt from Project 2A into this Part 2B(II). Students are required to create an abstract hanging mobile display for their Lego miniature characters. Tutorial 01 - Week 15 Through the Design Process assignment in part 2B(i), the students should have already understand their Lego miniature characters and selected some interesting key words that best reflect the Lego miniature character. On week 15, students are required to understand what a hanging mobile is, how to make a hanging mobile, what makes a good hanging mobile and collect some inspirational mobile images that could be applied to their design. With the findings from part 2B(i), students are required to refine their understanding and discuss it in class it with 2-3 different design ideas (drawings and sketches) derived and inspired from the key words for the hanging mobile display. Tutorial 02 – Week 16 Students are required to represents their new refine ideas as commented at the previous tutorial. Students are also required to come out with mock up/study models (min 2) and start to draft their presentation boards. (layout, ideas, inspiration, materials, drawings on draft layout on given on template of A4 papers) Task: Individually, students to present new refine ideas (model & drawings) and draft of presentation boards Tutorial 03 – Homework Students are required to show orthographic drawings of their design and a more refined model. It is best to get the idea approve at this week Task: By appointment students are required to show refined ideas of the model and show through mock up/study model how it will hang and show some drawings, draft layout and information of the presentation boards. - must get final approval! Tutorial 04 – Week 17 Week 17 Students should show improved progress of their model, drawings, presentation layout, details and materials content of the presentation board. Task: Show model, drawings and presentation boards layout draft. – should be 50% done. FINAL PRESENTATION – Week 18 All works will be setup at the presentation venue. Student will briefly present their work not more than 5 minutes to guest panels and lecturers. Setting up time is at 8AM-9AM. Presentation time will be at 9AMPM– 2PM. Task: Prepare and present final model and final presentation boards. PART 2B – Submission & Presentation Week 18 – 3rd of February 2016 1) One final model - use maximum of 3 different types of materials to produce the hanging mobile display model 2) The hanging mobile display should focus on the design elements and principles that are suitable with the selected toy character or the key word. 3) The hanging mobile display structure should not have any graphic visuals such as cave or flower or graphic details such a cracks or a drawing of screws or pattern or trees or any symbols. It should only be produce from simple basic lines, basic colors, geometric shapes, planes or volumes. 4) The size of the hanging mobile display should be NOT be more that 500mm x 500mm in width and 700mm max in length. Not less than 300mm x 300mm in width and 500mm in length. 5) Students may prepare the drawings and information on any type of presentation board and using any type of medium. 6) 3 (three) A2 size presentation boards with the followings details;
- 10. 10 (a) It is compulsory for the students are required to draw the plan OR top view, 2 elevation, 1 section and 1 perspective or axonometric of the proposed display hanging mobile model. These drawings are ORTHOGRAPHIC DRAWINGS TO SCALE! 1:1 or 2:1 and please use a ruler, not freehand. (b) The boards MUST include a brief introduction of your task, brief information about your toy character, the selected keywords and design process, and how the hanging mobile display functions etc. (c) Must give a “name” to the proposed hanging mobile display on the presentation board. (d) All drawings, sketches and diagrams must be hand drawn and text to be hand written as architectural handwriting using pencils OR pens. (e) Student may use any kind of medium, materials and architectural technique to produce the drawings BUT collage or digitalised is NOT acceptable. (f) Drawing techniques must follow the basic architectural hatching, architecture conventions, architectural graphic, line weight, symbols etc. Must label all drawings and illustrations with scale and proper annotations. (g) The A2 drawing board orientation should be all landscape .Three A2 size boards. (h) Please add your name, id number, Intro to Design SEPT 2015 and Taylor’s logo professionally on the board. Tips: Student can refer to the DK Ching book for presentation layouts and preparation. All sketches, doodles, research, planning, discussion to be place in the e-portfolio. It’s the responsibility of every student to make sure they record the process and final product of their work. Assessment criteria The assessment for this assignment will be based on your Demonstrated understanding of design concept/ideas, design process, design elements, design principles, composition, transformation of 3D forms from the keyword, presentation boards’ content , the hanging mobile display (model), and progress Originality, creativity, aesthetic value and workmanship quality of the model, presentation boards design and layout, and overall presentation. Clarity, depth of content, the use of diagrams and the use of design vocabularies of the explanation and descriptions Marking criteria PART 2B – 25% Demonstrated understanding of design concept/ideas, design process, design elements, 60% design principles, composition, transformation of 3D forms from the keyword, presentation boards’ content, the hanging mobile display (model), and progress Originality, creativity, aesthetic value and workmanship quality of the model, presentation boards 20% design and layout, and overall presentation Clarity, depth of content, the use of diagrams and the use of design vocabularies of the explanation 20% and descriptions. TOTAL100% .
- 11. 11 Suggested References 1. 3D Design Principles - http://faculty.wwu.edu/schadeb/dsgn250/website/images/DSGN250_3ddesignprinciples.pdf 2. The Elements and Principles of Three-Dimensional Design http://www.bishoplynch.org/document.doc?id=2466 3. Elements & Principles of Three-Dimensional Design https://prezi.com/ycic1ym0w8oc/elements-principles-of- three-dimensional-design/ 4. THREE DIMENSIONAL ELEMENTS AND PRINCIPLES OF ORDER: https://passart.wordpress.com/sculpture/3d-design-elements-and-principles-of-design/ 5. ART 314 - 3D Visual Principles http://newmediaabington.pbworks.com/w/page/29319669/ART%20314%20- %203D%20Visual%20Principles