![42
And the answer is ---
There are no dependency arrows. Assume that a
task that does not start on day 1 must be
dependent on some other task. Which tasks are
dependent on task D? Find the tasks that start
as soon as task D has finished… E and F. So the
answer is [A].](https://image.slidesharecdn.com/havingfunwithpert-140426024519-phpapp01/85/ITFT-PROJECT-MANAGEMENT-42-320.jpg)
ITFT - PROJECT MANAGEMENT
- 1. Gantt PERT Having Fun with &
- 2. 2 What are they? Gantt and PERT charts are both “CPM” (Critical Path Method) tools to: • Manage the tasks involved in big and complex projects • Let Project Managers Organise Time, people, equipment and money • Ensure the right people and equipment are in the right place and the right time • Allow managers to monitor the progress of a project
- 3. 3 Gantt ChartsHenry Laurence Gantt (1861-1919) Gantt Charts
- 4. 4 Gantt Basics • Basically, a timeline with tasks that can be connected to each other • Note the spelling! • It is not all-capitals! • Can be created with simple tools like Excel, but specialised tools like Microsoft Project make life easier
- 5. 5 Making a Gantt chart • Step 1 – list the tasks in the project
- 6. 6 Making a Gantt chart • Step 2 – add task durations
- 7. 7 Making a Gantt chart • Step 3 – add dependencies (which tasks cannot start before another task finishes)
- 8. 8 Notes •The arrows indicate dependencies. •Task 1 is a predecessor of task 2 – i.e. task 2 cannot start before task 1 ends. •Task 3 is dependent on task 2. Task 7 is dependent on two other tasks •Electrics, plumbing and landscaping are concurrent tasks and can happen at the same time, so they overlap on the chart. All 3 can start after task 4 ends. •Painting must wait for both electrics and plumbing to be finished. •Task 9 has zero duration, and is a milestone
- 9. 9 Making a Gantt chart • Step 4 – find the critical path The critical path is the sequence of tasks from beginning to end that takes the longest time to complete. It is also the shortest possible time that the project can be finished in. Any task on the critical path is called a critical task. No critical task can have its duration changed without affecting the end date of the project.
- 10. 10 • MS Project can work out the critical path for you! • The length of the critical path is the sum of the lengths of all critical tasks (the red tasks 1,2,3,4,5,7) which is 2+3+1+1.5+2+1 = 10.5 days. • In other words, the minimum amount of time required to get all tasks completed is 10.5 days • The other tasks (6,8) can each run over-time before affecting the end date of the project
- 11. 11 • The amount of time a task can be extended before it affects other tasks is called slack (or float). • Task 6 can take an extra day and a half before it affects the project’s end date, so each has 1.5 day’s slack.
- 12. 12 Critical tasks, by definition, can have NO slack. Thus if you are ever asked, “Can the duration of a critical task be changed without affecting the end date of the project?”, the answer is always NO!
- 13. 13 PERT Charts Not named after Mr Pert! Stands for Program Evaluation and Review Technique PERT Charts
- 14. 14 PERT basics • PERT is an acronym so it’s in capital letters • Gantt is a name, so only has an initial capital • In Gantt chart, the length of a task’s bar is proportional to the length of the task. This rarely applies to PERT charts. • There are a few different “flavours” of PERT and Gantt charts…
- 15. 15 PERT charts This PERT chart follows the “Activity on Arrow” style. •The tasks are shown by arrows. Task name are shown by letters, in this case. •The circles are called nodes. The nodes indicate the start or end of tasks. •Task durations are the shown by the numbers.
- 16. 16 ‘Activity on Node’ style PERT Activity on Node is a different flavour of PERT: this time the nodes are tasks, and the arrows are merely connectors. We will use Activity on Arrows, with the nodes merely connecting points. It’s a style issue!
- 17. 17 Let’s examine some issues with a PERT chart by considering quiz type questions
- 18. 18 • 1: Which tasks are on the critical path? • 2: What is the slack time for tasks C, D and G? • 3: Task C is delayed by one day. What impact would this have on the completion date of the project? Why? • 4: Task A will be delayed by 2 days because some equipment has arrived late. If the project manager wants to finish the project on time he will need to shorten the duration of one or more of the tasks. How can he achieve this? • 5: The project manager reduces the durations of tasks D and F by one day each. How will this affect the finishing date of the project?
- 19. 19 Which tasks are on the critical path? ANSWER: A,B,D,F,I Possible paths: A,B,C,E,I = 2+3+1+4+3 = 13 days A,B,D,F,I = 2+3+3+3+3 = 14 days A,G,H,I = 2+2+5+3 = 12 days
- 20. 20 What is the slack time for tasks C, D and G? Path C,E = 5 days, Path D,F = 6 days Path B,C,E = 8 days. Path B, D, F = 9 days Path G, H = 7 days. Difference (slack) = 1 day for tasks C or E compared to D,F So G & H have 2 days’ slack between them. B,C or E have 1 day’s slack. B,D,F have no slack. TASKS C and D… TASK G…
- 21. 21 Task C starts one day late. What impact would this have on the completion date of the project? Why? No impact, because task C has one day’s slack.
- 22. 22 Task A will be delayed by 2 days because some equipment has arrived late. If the project manager still wants to finish the project within the original time frame, he will need to shorten the time for one or more of the tasks. What steps can he take to reduce the number of days allocated to a task? The answer has NOTHING to do with the chart! Just say how jobs can be finished more quickly, e.g. bringing in extra workers from slack tasks, working longer hours, working weekend, streamlining work practices, automating tasks etc.
- 23. 23 • The project manager decides to reduce the time needed for tasks D and F by one day each. How effective will this reduction be in achieving his aim of maintaining the original finish time for the project? It is only partially effective. Reducing tasks D and F by one day each means the path A,B,D,F,I is now 12 days long. However, path A,B,C,E,I is still 13 days so it becomes the longest path, and therefore becomes the new critical path. The project is now 13 days long instead of 14, a saving of only one day.
- 24. 24 Some Gantt / PERT Terms •Lead time Occurs when a task should theoretically wait for its predecessor to finish, but can actually start a little early. The time that the tasks overlap is lead time. E.g. when replacing computers in a computer lab, you could actually start bringing in the new computers while the old ones were being packed up and moved out.
- 25. 25 Some Gantt / PERT Terms Lag time The minimum amount of time that must pass between the finish of one activity and the start of its successor(s). For example, if task A is laying a house’s concrete slab, and dependent task B is putting up the house walls, there would need to be some lag time between the end of task A and the start of task B to let the concrete set. Lag time is shown in a PERT chart as an arrow with a duration but no task assigned to it.
- 26. 26 Some Gantt / PERT Terms Dummy Task Shown by a dotted arrow on a PERT chart, it shows a dependency but no task. The next example shows this…
- 28. 28 Questions Q1. What tasks are on the critical path? Q2. What is the minimum time it would take for the family to reach the footy game after getting the alarm goes off? Q3. How much more time could dad walk the dog before eating breakfast got delayed? (Note: Mum insists the entire family eats together) Q4. What is this amount of time called? Q5. If mum skipped her 40 minutes shower, how much earlier would they get to the game?
- 29. 29 What is the critical path? Path 1 = 5+5+40+15+15+5+25 = 110 min Path 2 = 5+5+30+15+5+25 = 85 Path 3 = 5+5+10+15+15+5+25 = 80 The critical path is the longest path : path 1
- 30. 30 What is the minimum time it would take for the family to reach the footy game after the alarm starts ringing? The duration of the critical tasks… 110 minutes
- 31. 31 How much more time could dad walk the dog before eating breakfast got delayed? What is this amount of time called? 30 minutes… Shower + Prep Brekky = 55 min vs Walk Dog + Dad Shower = 25 min … 30 min diff Slack time (or float)
- 32. 32 If mum skipped her 40 minute shower, how much earlier would they get to the game? • When the critical path is reduced by 40 minutes, it stops being the critical path. • Path 2, at 85 min, becomes the critical path. • Since it is 25 min shorter than the original 110 minute critical path, there is a 25 minute saving.
- 33. 33 Other issues in a PERT chart
- 34. 34 This diagram shows some tasks and the timeline associated with the development of an online booking and recording system.
- 35. 35 If the design team cannot agree on “the steps involved in testing” and the task takes two extra days what impact will this have on the critical path of the project?
- 36. 36 NO IMPACT. The other path is 2+10+5 = 17 days, so the delayed task has 12 days’ slack!
- 37. 37 What task would be shown in the empty box?
- 38. 38 Everything before the empty box is about setting up testing. Everything after it is about fixing errors that were found by testing. What's missing? TESTING!
- 39. 39 What is the maximum number of days the task "select testers" could take if the critical path cannot be changed?
- 40. 40 Since "Select testers" is on the critical path, the easy answer is FIVE DAYS (i.e. no change, because any change to the task would change the critical path.)
- 41. 41 Question --- Is Task D is a predecessor for : (A) Tasks E&F? (B) Tasks B&C? (C) Tasks C&F? (D) Tasks B&E?
- 42. 42 And the answer is --- There are no dependency arrows. Assume that a task that does not start on day 1 must be dependent on some other task. Which tasks are dependent on task D? Find the tasks that start as soon as task D has finished… E and F. So the answer is [A].
- 43. 43 Mark the critical path Note the dummy task before ‘train the cashier’. I think it’s meant to imply that training the cashier is dependent on installing the hardware first… but it should connect to the node after “install hardware” and have a duration attached.
- 44. 44 The Critical Path is the Longest Path 1 = 1+1+2 = 4 days (excluding last task) Path 2 = 1+2 = 3 days *Path 3 = 2+1+2 = 5 days*
- 45. 45 Explain why the supermarket might have allowed a week between the completion of the project and the opening celebrations.
- 46. 46 One week could have been allowed for: • fixing any problems that occur during the testing of the system • allowing for any delays that might occur so that the store meets its opening date.
- 47. 47 • In the table above the critical path consists of tasks • A. 1,2,4 and 5? • B. 1,3,4 and 5? • C. 1,2,5 and 6? • D. 1,2,4 and 6?
- 48. 48 The path from start to end that takes the longest time is <A> 1,2,4,5. • Can't be <B> because tasks 1 and 3 are concurrent. • Can't be <C> because tasks 5 and 6 are concurrent. • Can't be <D> because task 6 does not lead to the longest possible path.
- 49. 49 In the table above how many tasks can run over time without affecting the completion date? 1,2,3 or 4?
- 50. 50 • Only tasks that are NOT on the critical path can possibly run over time without affecting the completion date. • Rule out the 4 tasks on the critical path (1,2,4,5). This leaves 3 & 6, so the answer must be 1 or 2 tasks. • Task 3 can run over time by 5 days. Task 6 can run over time by 2 days. So the answer is two tasks can overrun.
- 51. 51 Credits • Mark Kelly, McKinnon Secondary College • Lecture Notes