Itic 2016 global server hardware, server os reliability report

© Copyright 2016, Information Technology Intelligence Consulting (ITIC) Corp. All rights reserved.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
INFORMATION TECHNOLOGY
INTELLIGENCE CONSULTING
ITIC 2016 Global Server Hardware,
Server OS Reliability Report
February 2016

© Copyright 2016 Information Technology Intelligence Consulting Corp. (ITIC) All rights reserved.
Page 2
Executive Summary
IBM Power Systems, z Systems Servers Most Reliable for Eighth
Straight Year; Lenovo x86 Servers Deliver Highest
Uptime/Availability among all Intel x86-based Systems; Cisco UCS
Comes on Strong; Dell Reliability Ratchets Up; Intel Xeon Processor
E7 v3 chips incorporate advanced analytics; significantly boost
reliability of x86-based servers
In 2016 and beyond, infrastructure reliability is more essential than ever for business continuity.
The overall health of network operations, applications, management and security functions all
depend on the core foundational elements: server hardware, server operating systems and
virtualization to deliver high availability, robust management and solid security. The reliability
of the server, server OS and virtualization platforms are the cornerstones of the entire network
infrastructure. The individual and collective reliability of these platforms have a direct,
immediate and long lasting impact on daily operations and business results.
Since 2008, corporate enterprise users rated IBM server hardware as the most reliable platform,
besting 14 server hardware and 11 different server hardware virtualization platforms. A 61%
majority of IBM Power servers and Lenovo System x servers achieved “five nines” or 99.999%
availability – the equivalent of 5.25 minutes of unplanned per server downtime compared to 46%
of Hewlett-Packard servers and 40% of Oracle server hardware (See Exhibit 1).
Those are the results of the latest independent ITIC 2015 - 2016 Global Server Hardware and
Server OS Reliability Survey which polled C-level executives and IT managers at over 600
organizations worldwide during June/ July 2015 and updated in January 2016. ITIC’s eighth
annual Global Server Hardware and Server OS Reliability poll indicates that advances in
semiconductor technology, as well as software and management enhancements are contributing
to better performance and stability in server hardware and server OS software.
However, the results also reveal that several external issues have a direct impact and more
pivotal role in fortifying/solidifying or undermining reliability. Most notably they include:
 Human error
 Security breaches
 Mobility and Bring Your Own Device (BYOD)

Page 3
Exhibit 1. IBM Power Systems, Lenovo System x Most Reliable Servers
Copyright © 2012 ITIC All Rights Reserved
IBM, Lenovo Hardware Achieve Highest Percentage of 99.999% & Overall
Uptime & Availability in 2015
47%
61% 61%
41%
52%
50%
37% 37%
52%
41%
3% 2% 2%
7% 7%
HP IBM Lenovo Oracle Dell
99.999%
99.99%
99.9%
Source: ITIC 2016
Among the survey highlights:
• IBM, Lenovo, Cisco UCS, Dell and Fujitsu score highest reliability
• Cisco, Dell, IBM, Lenovo rated the highest in customer satisfaction.
• Dell hardware exhibited biggest year over year (YoY) improvements. Dell server
reliability increased seven percent from 2014 – 2015. Much of those gains are due to server
refresh rates.
• Red Hat Enterprise Linux (RHEL) & Ubuntu posted the highest reliability scores among
the Linux OS distributions for the second straight year.
• Red Hat Enterprise Linux (RHEL), Ubuntu and SUSE running on IBM Power Systems
and Lenovo System x followed by RHEL and Ubuntu on Cisco UCS and RHEL on HP
Integrity offer the highest availability among the major server/OS platforms.

Page 4
• Cisco, IBM, Lenovo and Dell w/Hyper-V continue to provide the most reliable
virtualization offerings.
In summary, the inherent reliability of the majority of server hardware platforms, server
operating systems and the underlying processor technology continues to improve year over year.
However, technology performance and reliability gains may be mitigated or wiped out entirely
by the aforementioned external factors. The three technology issues of most concern are:
Security, Disaster Recovery and Backup and Business Continuity.
Introduction
This Report examines and compares the reliability of 14 major server platforms, 18 server
operating system distributions and 11 server hardware virtualization layers. It also explores the
underlying issues that positively or negatively influence the inherent reliability of servers and
operating systems. It examines and analyzes the external elements that directly impact planned
and unplanned system downtime.
This report quantifies and qualifies the inherent reliability based on key metrics including:
 Automated and manual patch management
 Percentage of Tier 1, Tier 2 and Tier 3 Help Desk calls and length of outages
 Inherent server and server OS reliability
 System unavailability due to planned outages for routine system maintenance, upgrades
and the application of patches
 The impact of security issues, including how quickly vendors are able to respond to
security flaws/vulnerabilities with effective patches
 The impact of improperly configuring or right-sizing the server to accommodate
virtualization and more compute-intensive workloads
 Server virtualization reliability
 Vendor technical service and support and availability of documentation
 Human error
 Overworked, understaffed IT departments
 The impact of aging server hardware on reliability
 Integration and interoperability issues
This report also utilizes information gathered from previous ITIC surveys to compare and
contrast the reliability of the various server hardware, server OS and virtualization platforms and
track uptime trends. The survey findings provide crucial reliability metrics to assist

Page 5
organizations in making informed purchasing, management and upgrade decisions for their
specific business and budgetary needs.
Data & Analysis
In the mid-1990s, two nines or 99% uptime - the equivalent of 87.6 hours of per server/per
annum downtime - was the acceptable norm. In the 21st
Century Digital Age of “always on,”
interconnected networks, 99% or even “three nines” 99.9% availability is inadequate and
unthinkable for the overwhelming majority of businesses.
The latest ITIC updated 2015 - 2016 Reliability survey data found that over three-quarters of
respondents –72% – now consider 99.99 % to be the minimum acceptable levels of reliability for
their main line of business (LOB) servers. That’s an increase of 22 % in the last two years. In the
2014 survey, 49% of respondents said their businesses required a minimum of “four nines” or
99.99% availability.
Corporations are increasingly deploying virtualization, cloud computing and migrating to an
Internet of Things (IoT) environment that is built on interconnected devices embedded with
sensors to deliver business intelligence and Big Data Analytics. In a world where everything is
interconnected, the old adage: “A chain is only as strong as its weakest link,” has never rung
truer. In virtualized, cloud and IoT environments, the potential for collateral damage has
increased by orders of magnitudes. A virtual server running multiple instances of a crucial main
line of business (LOB) application will have a greater impact on employee productivity,
operations and the corporate bottom line in the event of a service interruption than a server
running a single application. Similarly, in IoT environments, where devices, applications, people
and processes are all interconnected, reliability is paramount to the corporation’s ability to
conduct business in an uninterrupted fashion.
Corporations, their end users, customers, business partners and suppliers require 24 x 7 access to
data resources irrespective of time, geographic location or device type. Business is conducted
round-the-clock in today’s Digital Age and global economy. Even a few minutes of downtime is
an anathema that can disrupt productivity and cost businesses tens of thousands to millions in
monetary and business losses.
As ITIC has done every year since 2008, we have published the specific Table that depicts the
availability percentages and the equivalent number of annual, monthly and weekly hours and
minutes of per server/per annum. Table 1 below provides a quick and eye opening reference for

Page 6
any organization or IT department to calculate downtime and reliability and the business and
monetary impact on their corporation.
The accepted metrics of three or four nines of uptime – 99.9%, 99.95% and 99.99%, – equate to
8.76 hours; 4.38 hours and 52.56 minutes of per server, per annum downtime, respectively, (See
Table 1). Additionally, the most recent ITIC poll shows that 25% of the over 600 respondent
organizations require a very high 99.999% or better degree of reliability; this is a scant 5.25
minutes of unplanned per server, per annum downtime. The percentage of respondents that
indicated their businesses need “five nines” or better availability more than doubled in the last
three years. In ITIC’s 2013 Reliability survey only 11% of participants said their firms required
“five nines” reliability. The 2015 – 2016 poll also found that five percent of corporations require
in excess of 99.999% reliability – mere seconds of downtime.
TABLE 1: Reliability/Uptime by the Numbers
Availability % Downtime per year Downtime per
month*
Downtime per
week
90% (one nine) 36.5 days 72 hours 16.8 hours
95% 18.25 days 36 hours 8.4 hours
97% 10.96 days 21.6 hours 5.04 hours
98% 7.30 days 14.4 hours 3.36 hours
99% (two nines) 3.65 days 7.20 hours 1.68 hours
99.5% 1.83 days 3.60 hours 50.4 minutes
99.8% 17.52 hours 86.23 minutes 20.16 minutes
99.9% (three nines) 8.76 hours 43.8 minutes 10.1 minutes
99.95% 4.38 hours 21.56 minutes 5.04 minutes
99.99% (four nines) 52.56 minutes 4.32 minutes 1.01 minutes
99.999% (five nines) 5.26 minutes 25.9 seconds 6.05 seconds
99.9999% (six nines) 31.5 seconds 2.59 seconds 0.605 seconds
99.99999% (seven nines) 3.15 seconds 0.259 seconds 0.0605 seconds
ITIC defines Tier 1, Tier 2 and Tier 3 server outages as follows:
 Tier 1: These are the typically minor common, albeit annoying occurrences. Network
administrators can usually resolve such incidents in less than 30 minutes for dependent users.
Tier 1 incidents can usually be resolved by rebooting the server (locally and remotely) and
rarely involve any data loss. Tier 1 outages range from something as innocuous as
accidentally unplugging the server to applying a quick update.
 Tier 2: These are moderate issues in which the server may be offline from one hour to four
hours. Tier 2 problems may require the intervention of more than one network administrator

Page 7
to troubleshoot. It frequently disrupts network operations for the company’s end users and
possibly business partners, customers and suppliers attempting to access data on an affected
corporate extranet. Data loss is possible and some remediation is required.
 Tier 3: This is the most severe incident. Tier 3 outages are of longer than four hours duration
in terms of service unavailability, the corporation’s associated dependent users and the
remediation efforts of IT. Tier 3 outages almost always require multiple network
administrators to resolve issues and there is a greater probability of data loss or damage to
systems. Another real threat associated with a protracted Tier 3 outage is potential lost
business and damage to the company’s reputation. Tier 3 outages can also be man-made such
as when e.g., a backhoe cuts a power line; a prolonged power outage; or a natural disaster,
such as a hurricane, flood or tornado occurs. Other causes of Tier 3 outages include an
external security breach/hack or when the IT department cannot obtain the necessary
technical support from their vendors, or if no fix is available for an otherwise a minor issue.
Any downtime is an anathema to business operations. Unplanned service outages of even a few
minutes can quickly disrupt network operations, end user productivity and adversely impact
business operations. The result of a Tier 2 outage of one-to-four hours or a severe Tier 3 outage
of four hours or more, can cause significant business losses, damage the company’s reputation
and raise the risk of litigation. Enterprises in vertical markets such as banking and finance, stock
exchanges, insurance, healthcare and legal, whose businesses are based on intensive data
transactions, can lose millions if service is interrupted for even five, 10 or 15 minutes. The
consequences can be catastrophic if the outage occurs during peak usage or during a crucial
transaction. Small and midsized businesses (SMBs) and midsized enterprises (SMEs) are also
vulnerable and equally as risk-averse as their enterprise counterparts. SMBs and SMEs typically
lack the manpower, resources and financial means to withstand the impact of a moderate Tier 2
or severe Tier 3 outage. Worst case scenario: SMBs and SMEs could be out of business.
Survey Highlights
 IBM Power Systems servers only 1% recorded over > 4 hours of per server/per annum
downtime of any major mainstream hardware platform.
 IBM z Systems Enterprise had the lowest reported downtime incidences/highest
availability of any platform.
 IBM Power Systems and Lenovo x86 server hardware running the Red Hat Enterprise
Linux (RHEL), Ubuntu open source operating systems were either first or second in
every reliability category, including virtualization and security.
 Cisco, Dell, IBM and Lenovo server hardware received the highest marks for customer
satisfaction and overall technical support.

Page 8
 Oracle x86 and HP ProLiant servers continue to record the highest percentages -- 10%,
each -- of >4 hours of per server annual downtime. Dell PowerEdge Server reliability
notched a measurable increase with only six percent of the Dell servers experiencing in
excess of 4 hours of downtime versus 13% in the 2014- 2015 survey. Much of the higher
outage time on the Oracle, HP and Dell platforms is attributable to a high proportion of
users retaining the hardware for 4, 5 and 6+ years without refreshing/retrofitting the
servers.
 Some 51% of survey respondents reported that aged or inadequate hardware (3 ½+ years)
has had a negative impact on server uptime and reliability vs. 31% that said it has not
impacted reliability/uptime.
 Reliability of the HP ProLiant and Oracle SPARC & x86 hardware and Solaris OS
remains spotty mainly due to aging and protracted product refresh cycles. Some Oracle
hardware customers are delaying upgrades or switching to other platforms.
 Some 15% of Oracle customers continue to rate service & support as Poor or
Unsatisfactory. Dissatisfaction with Oracle licensing and pricing policies remains high.
 Only 1% of Cisco, 2% of Dell, 1% of IBM and Lenovo, 3% of HP, 4% of Fujitsu and 6%
of Toshiba users gave those vendors “Poor” or “Unsatisfactory” customer support ratings.
 About 30% of businesses spend more than one hour applying patches manually; this
percentage is unchanged from the 2014 and 2015 polls.
Human Error, Security Undermine Reliability
To reiterate, ITIC’s survey results indicate that the inherent reliability and uptime of nearly all of
the 14 major server hardware and 18 server operating system distributions generally continues to
improve year-over- year. At the same time, ITIC’s 2016 Reliability research reveals that a
variety of external factors are having more of a direct impact on system downtime and overall
availability. As Exhibit 2 below illustrates, these include human error; overworked and
understaffed IT departments; the rapid mainstream adoption of complex new technologies such
as virtualization and increasing cloud computing deployments and an explosion of Bring Your
Own Device (BYOD) technology.
Significantly, the survey results indicate that human error and security tied as the top issues that
cause server hardware, server OS and overall network downtime. This is hardly surprising since
the two issues are inextricably intertwined.

Page 9
Exhibit 2 Five out of 10 Enterprises Rank Human Error and Security as Top Causes of
Downtime
In 2016 what issues have the most negative impact on reliability &
downtime for server HW and OS platforms? (Select all that Apply)
7%
7%
8%
8%
9%
10%
11%
13%
15%
15%
15%
16%
18%
22%
30%
33%
52%
52%
Mobility
Other
Lack of support for crucial apps
IT managers lack training
Poor vendor tech support
Configuration complexity
Lack of documentation
N/A We don't track reliability
Vendors too slow to issue patches
BYOD
Integration/interoperability issues
Server OS too old to run new compute…
Instability of server hardware
Server hardware too old/inadequate
IT Dept. is understaffed/overworked
Bugs/flaws in server OS
Security flaws
Human Error
NOTE: “Human Error” and Security are the top two
issues that most negatively impact reliability
surpassing inherent flaws/bugs in the server OS,
understaffed IT departments and old/inadequate
server hardware.
Source: ITIC 2016
2016 Top Reliability Trends:
 Four Nines – 99.99% is New Minimum Reliability Requirement. A 72%
majority of corporations now require a minimum of 99.99% uptime for mission
critical hardware, operating systems and main line of business (LOB) applications.

Page 10
Four nines or 99.99% reliability equates to 52.56 minutes of unplanned per server/per
annum downtime, or a scant 4.38 minutes a month. The latest ITIC poll also revealed
that 24% of respondents or one-in-four businesses now require “five nines” or
99.999% availability; this equals 5.25 minutes per server annual downtime. And 3%
of businesses need “six nines” of true fault tolerant 99.9999% reliability. ITIC
expects user reliability requirements to increase as more organizations transition to
the Internet of Things (IoT) and utilize mobile and BYOD. (See Exhibit 3).
 Security: Given the daily reports of data breaches and expanding array of pervasive
and pernicious hacks and rogue code, 82% of survey participants ranked security as
the top challenge and the biggest ongoing threat to network reliability. Security
problems negatively impact overall system and network reliability according to 46%
of respondents versus 32% who said security does not affect uptime.
 Cost of Hourly Downtime Increases: 98% of firms say hourly downtime costs
exceed $100K and 37% of respondents estimate hourly downtime costs their
companies $300 to $500K. (See Exhibit 10)
Exhibit 3 Enterprise Reliability Requirements Increase: 72% of Corporations Require
Minimum 99.99% Uptime/Availability
Enterprise Minimum Required Levels of Reliability/Uptime
Increase Dramatically from 2013 to 2016
9%
24%
39%
25%
3%
7%
12%
49%
25%
5%
0% 1%
72%
24%
3%
99% 99.9% 99.99% 99.999% >99.999%
2013
2014
2016
Actual unplanned annual downtime
87.66 hours 52 seconds8.76 hours 52 minutes 5.25 minutes
In 2016, 72% of businesses require a
minimum99.99% reliability/uptime;up
22% since 2014 and an increase of 33%
since 2013. 99.99%+ and greater
reliability are mission-critical.
Source: ITIC 2016

Page 11
Additionally, the survey shows that the challenges related to human error and security are
increasing year over year. By contrast, the percentage of survey respondents who cited
longstanding concerns involving issues like flaws in the server operating system, understaffed IT
departments and hardware-related problems as undermining reliability has leveled off and
remained static since 2014.
Top Issues negatively impacting network reliability:
• Human Error – 52% vs. 44% in the 2014 and 49% in the 2015 polls
• Security issues tied with Human Error as the top issue negatively affecting
reliability with 52% of respondents citing it as a top cause of downtime
• Flaws in the server operating system – 33%
• Understaffed IT departments or inadequately trained administrators – 33%
• Hardware problems – (e.g. aging hardware; trouble getting replacement parts) was
cited by 26%
Most significantly, 52% of survey respondents cited “human error” as the Number One issue
negatively impacting reliability (See Exhibit 2). Other top trouble sources include: bugs and
flaws in the server OS; understaffed and overworked IT departments and aging hardware that is
too old or inadequate to support current compute-intensive physical and virtual workloads.
Inherent instability of server hardware was cited by 18% as undercutting reliability.
In the context of its Reliability Surveys, ITIC broadly defines human error to encompass both the
technology and business mistakes organizations make with respect to their network equipment
and strategies.
Human error as it relates to technology includes but is not limited to:
 Configuration, deployment and management mistakes
 Failure to upgrade or right size servers to accommodate more data and compute intensive
workloads.
 Failure to migrate and upgrade outmoded applications that are no longer supported by the
vendor.
 Failing to keep up to date on patches and security.
Human error with respect to business issues includes:

Page 12
 Failure to allocate the appropriate Capital Expenditure and Operational Expenditure
funds for equipment purchases and ongoing management and maintenance functions
 Failure to devise, implement and upgrade the necessary computer and network to address
issues like Cloud computing, Mobility, Remote Access, and Bring Your Own Device
(BYOD).
 Failure to construct and enforce strong computer and network security policies.
 Ignorance of Total Cost of Ownership (TCO), Return on Investment (ROI).
 Failure to track hourly downtime costs.
 Failure to track and assess the impact of Service Level Agreements and regulatory
compliance issues like Sarbanes-Oxley (SOX), Health Insurance Portability and
Accountability Act (HIPAA).
All of the aforementioned human errors can have an immediate, tangible and far reaching impact
on daily, monthly and annual system, application and network reliability and availability. On the
server hardware side it is apparent that when corporations retain their servers for protracted
periods of four, five and even six years or more without upgrading, they will experience
significant increases in unplanned downtime.
ITIC classifies a corporate decision to retain server hardware for a prolonged period of time
beyond its useful lifecycle of 3 ½ to 4 years without retrofitting, rightsizing the server workloads
or upgrading the hardware platform as human error.
Vendors’ technical service and support; the ready availability of documentation and
fixes/patches for known issues and security vulnerabilities also play a crucial role in helping to
mitigate or exacerbate and extend outages.
Corporate Business Issues Impact Reliability for Better or Worse
A major reason for IBM’s ongoing outstanding Power Systems and z Systems server reliability
results is that IBM management is a bastion of stability and continues to invest heavily in
research and development. Additionally, IBM has notably leveraged its across-the-board
technology research and enhancements in Big Data Analytics, cognitive computing, Security
(encryption and cryptography) and manageability and incorporated those features into the Power
Systems and z Systems product lines. The proof is evident in IBM’s reliability results.
IBM’s z Systems high end mainframe class server was the only major mainstream hardware
platform that had no – 0% - unplanned server outages of over four (4) hours duration. The z13
line of mainframe class servers experienced 1.27 minutes of unplanned per server annual
downtime. That equates to approximately 7 to 10 seconds monthly for each server.

Page 13
The IBM line of Power Systems servers running Red Hat Enterprise Linux, SuSE and Open
Source Ubuntu, lived up to their name, recording just 3.5 minutes of per server/per annum
downtime or 29 seconds per server each month.
HP Corporate Split Impacts Reliability, Customer Service/Support
On the opposite end of the spectrum, HP’s ongoing management woes for several years prior to
last November’s split into two separate companies, had a trickledown effect on reliability. While
Hewlett-Packard received high marks for customer satisfaction, some 10% HP ProLiant model
servers recorded unplanned downtime exceeding four (4) hours. The results were noticeably
better for HP’s Integrity line; only three percent recorded more than four (4) hours of unplanned
per server/per annum downtime.
Additionally, HP users’ anecdotal essay comments cited growing concerns/questions
surrounding HP’s imminent split into two organizations. On November 1, 2015, HP officially
split into two separate entities. HP Enterprise consists of five separate segments for financial
reporting purposes: the Enterprise Group, Enterprise Services, Software, Financial Services, and
Corporate Investments. The second organization, HP Inc. will focus more on the consumer
segment and sell printers and personal computers. While survey respondents are still generally
satisfied with the overall reliability of HP servers, they are understandably nervous on how the
split into two companies will impact HP Enterprise’s ability to deliver innovation and the top
notch technical service and support they’ve grown accustomed to over the last six decades.
Additionally, as HP’s commodity businesses have come under increasing pressure, there has
been significant tumult and changes at the executive management level. The company has also
continued to shave its headcount. In the last 10 years, HP has cut an estimated 100,000 workers -
- more than any other high tech firm as a means to maintain profitability. Since taking over as
chief executive in 2011, Meg Whitman has overseen a dramatic downsizing that has eliminated
about 55,000 jobs thus far. And more layoffs are imminent. In September, HP announced it will
chop another 25,000 to 30,000 employees; this equates to approximately 10% of its total
workforce. HP said that the layoffs will save the company $2.7 billion annually. Ironically
however, one of the hardest hit groups is HP’s Enterprise Services team; Ms. Whitman claims
that services are still a strategic priority for the struggling vendor. In this context, the inherent
reliability of HP’s systems will be more crucial than ever. And although HP servers and services
have long been a staple in corporate enterprises, survey respondents indicated they are nervous
about HP’s future direction in light of the continuing job cuts and the company’s plans to split
into two separate entities in November 2015. Specifically, in anecdotal essay comments and first
person interviews, IT managers noted that HP’s formerly stellar technical service and support is
slipping. IT administrators disclosed they are spending longer time on hold waiting to reach a
live technician and oftentimes when they finally do speak to tech support they are compelled to
escalate the call. HP users also complained of extended lead times to obtain replacement parts.

Page 14
Cisco Reliability Goes Up with UCS
The results continue to be upbeat for Cisco Systems, Inc.’s Cisco Unified Computing System
(UCS) servers. Appearing for the second year in ITIC Reliability poll, Cisco UCS once again
made an impressive showing, posting uptime equal to or better than HP (in certain categories)
and bested only by IBM and Lenovo server reliability. Half – 50% - the survey participants said
their Cisco UCS servers achieved 99.999% of per server/per annum availability. Cisco, Dell,
IBM, Apple and HP (in that order) achieved the highest customer satisfaction ratings for product
functionality, reliability, service and support. The Cisco survey respondents also gave the firm
high marks for quick problem resolution and the technical savvy of both its telephone and onsite
tech specialists.
Ongoing Reliability Technology Trends
Among the other top survey highlights:
 Some 30% of businesses spend more than 1 hour applying patches manually; up from
26% in 2013 but nowhere near the peak of 40% in the ITIC 2011 Reliability survey
 Over three-quarters – 77% - of IBM AIX users and 69% HP UX users reported they
“never” or “rarely” reboot the server OS, including planned reboots to add or reconfigure
system resources. In contrast, less than half -- 49% of Oracle Solaris and 45% of
Windows Server survey respondents indicated they “rarely” or “never” had to reboot
their servers for planned maintenance.
 Nearly one-third or 31% of businesses don’t provide for hardware failover and
redundancy and 12% of companies don’t bother to track hardware failure rates.
 Some 45% of respondents rely on the built-in redundant hardware capabilities of
their servers to provide high availability and failover protection.
 A 51% majority of respondents said their main line of business (LOB) servers were
two-to-four years old. Of that number 30% revealed their LOB servers were two-to-three
years old; 21% said they were three-to-four years old. Another 21% indicated their
servers were four, five or greater than five years old.
 Customer satisfaction: Dell (75%), IBM (75%), Lenovo (75%) and Cisco (70%)
achieved the highest customer satisfaction ratings for products, service and support.
Oracle’s customer satisfaction ratings were again the lowest in the survey. Only 47%
ranked its technical service and support as “excellent” or “very good – although that was

Page 15
an increase of two percent over the ITIC 2014- 2015 Reliability survey numbers.
However, for the fifth year in a row, Oracle’s customers were the most dissatisfied in the
survey. Some 14% of respondents rated Oracle’s technical service and support “poor” or
“unsatisfactory.”
Processor Technology
The servers are only as good as their parts. The memory and CPU must keep pace. To reiterate,
any company that expects to achieve optimal server uptime and availability should invest in the
underlying processor technology that best aligns with their applications and workloads. Market
leader Intel, which has close to 90% of the microprocessor market and Advanced Micro Devices
(AMD) continually update their processors.
The Intel Xeon Processor E7 v2 and the latest E7 v3 for example, are specifically geared towards
reliability. Both the E7 v2 chips and the E7 v3 accommodate and accelerate in-memory analytics
and the scalability to manage large data sets and the ability to boost I/O performance. In a
definitive nod to reliability, the Intel Xeon Processor E7 v2 and v3 families incorporate Intel’s
Run Sure Technology. It integrates processor, firmware, and software layers to diagnose fatal
errors, contain faults and automatically recover to keep the server operating. The Xeon
Processor E7 v2 and v3 chips also feature Intel’s Resilient Memory Technologies, to solidify and
ensure data integrity within the memory subsystem.
The Intel processor E7-8800/4800 v3 product families debuted in May 2015. They provide
accelerated business insight through real-time analytics and enhanced performance and reliability
for mission-critical computing. Intel claims that the RAS enhancements in the E7 v3 family of
chips ensure up to “five nines” or 99.999% uptime.
Real-time business intelligence is a top priority for small and midsize businesses (SMBs) to the
largest enterprises and spanning all vertical industries. In addition to high performance and
reliability, the E7 v3 processors assist customers to sift through the data deluge and extract
actionable insights from these massive volumes of data. The Intel Xeon processor E7 v3 family
helps customers to securely process and analyze massive data sets in system memory for faster
decision-making and improved operational efficiency, giving companies a competitive edge.
According to Intel, the E7 v3 processor family delivers up to 6 x improvements in business
processing application performance for in-memory transactional workloads and is optimized
with the new Intel® Transactional Synchronization Extensions (Intel® TSX). The E7 v3 family
also supports up to 18 cores; this is a 20% increase in cores compared to the prior generation. It
also has up to 45 megabytes of last-level cache, which enables it to deliver up to 70% percent
more decision support analytic sessions per hour, according to Intel. The Intel Xeon Processor
E7 v2 and v3 offerings are built around the philosophy of continuous self-monitoring and self-

Page 16
healing. Self-healing features enable the server to proactively and reactively repair known errors
and minimize future errors. This in turn, bolsters reliability and uptime.
The synergies between the server hardware and the underlying Intel processors enable
organizations to realize average performance gains of 20% to 30% (depending on individual
workloads and configurations) and reduced power consumption of 15% to 25% compared with
prior models. A dual core processor may deliver sufficient performance, speed and response
time for a small server that services a department or remote branch office. However, it could
prove entirely inadequate for a main LOB server-based application that features digital audio,
video and large, very dense file formats. Compute-intensive, business critical workloads require
stronger, more advanced four- and eight-socket processors.
Intel processors are installed in a majority of today’s servers, desktops, notebooks and tablets.
For the second year in a row the 2015 - 2016 ITIC Global Reliability survey incorporated
specific questions on corporations’ experiences with the performance and reliability of the latest
Intel Xeon E7 v2 Processors. Among the key findings:
 A 67% majority of corporations saw a 35% to 60% improvement in reliability and
performance (the variation was determined by the age of the server hardware and the
workload) with the Intel Xeon E7 v2 processor across-the- board on x86 based servers
including Cisco UCS Dell, HP, IBM and Oracle.
 Eight out of 10 servers equipped with the Intel Xeon E7 v2 and v3 achieved “four nines”
or 99.99% of per server/per annum uptime/availability. That equates to 52 minutes of per
server/per annum downtime or 4.33 minutes per month.
 Customer satisfaction with Intel performance, reliability, service and support is
extremely high. Some 46% of respondents rated it “Excellent,” 37% rated it “Very
Good” and 17% rated it “Good.” None of the respondents gave the Intel processors or
Intel’s technical support a “Poor” or “Unsatisfactory” rating.
 Virtual servers equipped with the Intel Xeon E7 v2 and v3 Processors received similarly
high performance and reliability grades. An 82% majority achieved a minimum of
99.99%; 48% achieved 99.999% and six percent attained 99.9999%.
The inherent reliability of the Intel x86-based and RISC processor platforms is extremely close.
ITIC’s survey results and subsequent first person conversations with IT managers indicates that
the improvements in the Xeon E7 v2 and v3 families can deliver comparable native performance,
reliability and uptime when installed on robust servers that are new or up to 3 years old and when
corporation right-size the server configurations to ensure they are adequate for current and future
compute intensive physical, virtual and cloud workloads.
The breakdown in x86 server reliability generally (but not always) occurs not because of any
inherent flaws in the underlying server hardware because x86 customers unwisely “push their

Page 17
luck” and retain their server hardware for 4 ½ to sometimes 6+ years without retro-fitting,
upgrading. A business that overloading old, outmoded servers or misconfigures a server will
consequently experience availability problems. This is particularly true of organizations that
purchase entry level or inexpensive commodity servers.
ITIC’s first person customer interviews yielded invaluable anecdotal information regarding the
net positive performance and reliability gains specifically related to the newer processor
technology.
Businesses are well advised to refresh or upgrade their servers with the latest processors in order
to accommodate higher workloads and optimize reliability.
Real World Reliability Scenarios
Once again, it cannot be overstated that ITIC’s 2016 survey data indicates that the human
element/human error continues to exact a greater toll on reliability than the underlying hardware
technology. Human error and security issues as the primary causes of unreliability, encompasses
a number of contributing subset issues, including:
 Corporations utilizing outdated, inadequate server hardware
 Inadequate resources, e.g. overworked/understaffed, inadequately trained IT managers
particularly with regard to security and cross-platform interoperability/integration
 Configuration and management mistakes
The fact that 10% of HP ProLiant and Oracle systems racked up the highest percentages of
downtime exceeding four (4) hours of unplanned downtime is a direct consequence of
organizations’ retaining server hardware for prolonged periods of time – over 3 ½ to over 6 years
without retrofitting the servers to accommodate increased workloads. A deep-dive analysis of
the results indicates that the prolonged unplanned downtime of over four hours on the HP and
Oracle servers is indicative of end user behavioral patterns. In the case of Oracle, many survey
respondents indicated they were holding onto the servers until they could migrate to rival
platforms. Some 53% of HP ProLiant users, for example, indicated they retained their servers
for four, five or even six years or longer without upgrading/retrofitting or right-sizing the servers
to accommodate today’s more compute intensive workloads.
On a positive note the reliability of Dell PowerEdge servers increased perceptibly in this year’s
survey – with only six percent of survey respondents stating their Dell servers recorded per
server/per annum outages in excess of four hours. This is less than half of the 13% of Dell users
who reported protracted server downtime exceeding four hours in the 2014 Reliability poll. Not
surprisingly, over one-third of the Dell server respondents in this year’s poll said they had
upgraded or retrofitted their servers within the past 12 months.

Page 18
By contrast, only 20% of Lenovo System x, 17% of IBM Power Systems users and 24% of Cisco
UCS users retained their servers for four or more years without upgrading or retrofitting them. It
is a testament to the technical elegance of the former Sun Microsystems platforms – now the
Oracle x86 and Oracle SPARC servers -- that “only” 10% percent and eight percent of those
platforms respectively, experienced over four hours of per server/per annum unplanned
downtime. This is despite the fact that 55% of those users reported keeping the Oracle servers for
four, five or six years without upgrading.
The high end enterprise mainframe IBM System z Enterprise is a different breed of server and in
a class of its own. The System z is more hardened and robust than the overwhelming majority of
mainstream LOB servers. And the System z is typically managed and maintained by highly
experienced/guru administrators.
For organizations that opt to retain their server hardware for over four years and test the limits of
its capacity, top notch technical service and support from their vendors assumes much greater
importance. The vendors’ ability to respond quickly; the ready availability of replacement parts
and immediate access to documentation and fixes/patches for known issues and security
vulnerabilities will help to mitigate or exacerbate and extend corporate outages.
Top notch technical support explains why Dell consistently gets high marks for customer
satisfaction even when reliability is spotty. Dell has also benefitted greatly from its decision to
move its corporate technical service and support organization back onshore. Many Dell and
Oracle customers told ITIC in their anecdotal comments and first person interviews they have
only themselves to blame when the servers crash because they are insufficiently robust enough to
carry heavy workloads. Vendors’ ability to deliver superlative technical service and support
figures prominently in reliability and increased system availability. Technical service and
support – good and bad –distinguishes and differentiates vendors from rivals. How promptly,
efficiently and effectively vendors respond to corporate customers when issues arise has a
definite impact on customer retention and the company’s willingness to upgrade and purchase
new equipment and software, expand usage of specific products and renew service contracts.
IBM Rock Solid Reliability
Corporate enterprises have given IBM hardware the highest reliability ratings every year since
2008 when ITIC began conducting the Global Server Hardware and Server OS Reliability poll.
This is no accident.

Page 19
IBM’s high reliability ratings over the past decade speak to the technical excellence and
robustness of the hardware platform. The rock solid reliability also reflects and underscores the
consistency of IBM’s technical service, support, security and customer responsiveness over the
last eight years.
The overall stability of IBM’s management and its continued focus on R&D, innovation through
patents and the company’s tactical and strategic vision in integrating Data Analytics, security,
cognitive computing and support for hybrid clouds into its core server hardware offerings also
play a pivotal role in the underlying excellence of its Power Systems and z Systems offerings.
IBM like many vendors has suffered contraction in its hardware sales. In 2014 IBM notably sold
its commodity x86 server business (which included approximately seven thousand employees) to
Lenovo for just over $2 billion. This move benefitted both IBM and Lenovo. It freed IBM to
focus on high end servers like its Power Systems and mainframe class z Systems servers, while
Lenovo is making a success of the x86 platforms.
Unlike its chief rivals, which have been battered by management upheavals (HP) or in transition
due to mergers and acquisitions (Oracle’s purchase of Sun Microsystems), IBM, products and
strategies with chief executive officer and President Virginia Rometty at the helm, are bastions
of stability, advanced functionality and security. This stability extends to IBM’s continuous
investment in improving the core RAS and performance capabilities across its server lines and
working closely with Linux OS and open source vendors like Red Hat, SUSE and Canonical
which makes the highly regarded Ubuntu.
To reiterate, thanks to its unflagging commitment to R&D and continual refresh of its embedded
performance, reliability, security and management functions, IBM hardware retains its status as
best in class in terms of reliability, stability and performance and customer satisfaction. IBM
consistently has demonstrated its ability to articulate and craft a comprehensive product roadmap
and strategy and execute against it. IBM (along with Cisco Systems, Intel and Microsoft) is
perennially on the Top 10 list of companies that spend the most of research and development
(R&D), according to Standard & P Capital IQ. In 2014, IBM spent nearly $6 billion on R&D
(six percent of annual revenue). This is approximately twice as much as rival HP which spent
just over $3 billion on R&D and 19% more than Oracle which allocated $5 billion to R&D. IBM
also continues to rank very high in customer satisfaction. IBM servers recorded the lowest
incidences of the more significant Tier 2 and Tier 3 server outages lasting from one-to-four hours
or more.
In addition, IBM Power Systems and Lenovo servers averaged the lowest percentage (4%) of
annual server downtime of one to over four (>4) hours compared to an average of 6% for Dell
servers and 8% of all HP servers and 8% of all Oracle server hardware.

Page 20
In the semiconductor sector, Intel outspent all of its rivals on R&D. In 2014, Intel’s R&D
spending reached a record-high $10.6 billion and the world’s number one chipmaker remains on
track with its 2015 R&D spending as well. Intel’s R&D expenditures were triple that of its
closest competitors Qualcomm which spent nearly $3.4 billion on R&D and Samsung which
spent $2.8 billion on R&D.
A significant portion of Intel’s R&D investments are specifically aimed at ameliorating the
reliability of its latest processor family the Intel Xeon Processor E7 v3 which are widely used in
Lenovo System x, Dell PowerEdge, HP ProLiant and Oracle systems. To reiterate, The E7 v3
chips accommodate and accelerate in-memory analytics and the scalability to manage large data
sets and the ability to boost I/O performance. In a definitive nod to reliability, the latest Intel
Xeon Processor E7 v3 family incorporates the Intel Run Sure Technology that integrates
processor, firmware, and software layers to help diagnose fatal errors, contain faults, and
automatically recover to keep the server operational.
Lenovo System x Servers Best in Class Reliability
It has been a full year since IBM completed the sale of its x86 server business to Lenovo in a
deal that was valued at $2.3 billion.
The purchase is Lenovo's latest since it overtook HP as the world’s top PC maker in 2014. In the
ensuing 18 months, the Lenovo System x servers have maintained the same high levels of
reliability they had previously achieved while under the IBM brand. In public statements,
Lenovo Chief Executive Yang Yuanqing said the IBM deal represented a new "growth engine"
for his company. Yuanqing estimates that the Lenovo x86 Business Unit will net $5 billion in
revenue during 2015, its first full year of operations and deliver profit margins higher than the
four percent of Lenovo's PC business.
Lenovo also markets its line of entry level ThinkServers but it is clearly counting on the System
x servers to compete in the enterprise. These higher-end machines have the proven performance,
reliability and advanced features to accommodate more compute-intensive and complex
workloads and incorporate complex analytics and database-related functions.
This is excellent news for Lenovo customers and Lenovo itself. As Exhibit 4 shows, Lenovo
System x servers retain the same high levels of reliability they delivered while still under the
IBM brand. As part of the 2014 sale agreement, IBM will continue to service and support the
Lenovo x86 servers and customers through 2019.

Page 21
Exhibit 4. IBM, Lenovo Hardware Record Least Amount of One to Over Four
Hours of Annual Server Downtime
Annual Server Downtime of one to >4 hours by
vendor platform 2016
4% 4%
6%
8% 8%
IBM Lenovo Dell HP Oracle
NOTE: Lenovo System x, IBM Power Systems servers averaged the lowest percentage (4%) of one to >4
hours of per server/per annum server outages compared to HP ProLiant and Integrity servers, Dell
PowerEdge, Oracle x86 and SPARC hardware platforms.
Source: ITIC 2016
Additionally IBM Power Systems and Lenovo System x servers recorded the least amount of
downtime of one to 40 minutes and 41 minutes to up to four (4) hours of per annum/per system
downtime of any of the over one dozen major server hardware platforms.
ITIC’s 2015 and 2016 Reliability Survey polled customers on how the Lenovo System x servers
were faring in terms of product quality and the responsiveness and quality of after-market
technical service and support. As Exhibit 5 illustrates, 99% of respondents rated Lenovo’s
service and support, product quality as excellent and had experience no perceptible differences.
It should be noted however, that when IBM sold its’ x86 server business to Lenovo in 2014, the
sale agreement stipulated that IBM will continue to provide after-market technical support for
five years after the sale – until 2019.
This is a boon for customers since it ensures there will be no interruption of service. On the plus
side, Lenovo which also purchased IBM’s desktop business has maintained a high level of
customer service and support since taking over from Big Blue.

Page 22
Exhibit 5. Lenovo System x Servers Maintain High Reliability, Excellent
Technical Service and Support Record
Has the Quality of the Products, Technical Service & Support Changed
Since Lenovo Acquired IBM’s x86 Server Business in 2014?
85%
14%
0% 1%
No, it Remains Excellent or
Very Good
No perceptible difference
Yes, it's declined
Unsure
NOTE: NONE – 0% - of survey respondents said that the quality of products or technical service &
support has declined since Lenovo purchased IBM’s x86 Server Business in 2014
Source: ITIC 2016
Similarly as Exhibit 6 shows, the latest Intel Xeon E7 v2 and v3 processors deliver equivalent
levels of reliability in apple-to-apple comparisons of UNIX/RISC servers with similar
configurations and running equivalent workloads.
Anecdotal customer interviews then revealed that aforementioned external issues, e.g., human
error related to misconfiguration of equipment; spotty technical service and support , retaining
hardware for over 3 ½ years without retrofitting to accommodate increased workloads and failure

Page 23
to update the equipment with the latest security fixes and patch, will determine the ultimate
reliability metrics and percentages.
Exhibit 6. Intel Xeon E7 v2/v3 RAS Processors Deliver Equivalent Level of
99.99% & 99.999% > Reliability as UNIX/RISC Servers in Comparable
Configurations
Xeon E7 v2/v3 RAS x86 and UNIX/RISC Processors Provide Equivalent
Levels Enterprise Unplanned Downtime 2016 (Hours per Year) in
Comparable Server Hardware Configurations and Workloads
0.3
0.23
0.23
0.22
0.21
0.20
0.19
0.18
0.17
Oracle Sun x86
Fujitsu Primequest x86
HP ProLiant
Fujitsu Primergy x86
Cisco x86
DellPowerEdge x86 Linux
HP Integrity NonStop x86
Lenovo System x
IBM Power Systems
Enterprises in 2016
define mission-critical
class reliability as 0.20
(12 minutes) per server,
per year, or less.
NOTE: In comparable server configurations (similar workloads, age of servers) Intel Xeon E7 v2 RAS
processors achieved equivalent levels of 99.99% and 99.999% > uptime as competing UNIX/RISC servers
Source: ITIC 2016
Survey respondents also said that IBM z Systems, IBM Power Systems and Lenovo System x
servers recorded the least amount of per server/per annum of any of the x86-based hardware
platforms, with just one percent (1%) of servers notching prolonged outages of over four (>4)
hours duration. On the other end of the spectrum, corporate customers reported that 10% of the
HP ProLiant and Oracle servers racked up downtime exceeding four hours per annum/per server
downtime. According to customer interviews and essay comments, the high amount of Dell
PowerEdge and HP ProLiant system unavailability is attributable mainly to the high proportion
60% of aged Dell PowerEdge and 53% HP ProLiant servers that are over four years old and have
not been upgraded or replaced.

Page 24
Upon delving more deeply into the research, ITIC found that in those instances where the HP
ProLiant , Oracle and Dell PowerEdge servers were a more reasonable two-to-three and a half
years old, the percentage of system downtime of over four (>4) hours dropped to a much more
reliable three percent (3%) on both the Dell PowerEdge and HP ProLiant platforms.
IBM z Systems, IBM Power Systems with Linux Record
Highest Uptime
As Exhibit 7 illustrates, survey respondents ranked IBM z Systems, IBM Power Systems and
Lenovo System x servers running Linux number one, two and three in that order for the least
amount of unplanned downtime per server, per annum in early 2016.
IBM z13 and 13s mainframe servers running Linux registered just 1.27 minutes of unplanned
outages per server/per annum or approximately 10 seconds per month, which is the equivalent of
true fault tolerance.
IBM Power Systems servers running Linux were close behind, recording just 3.5 minutes of per
server/per annum unplanned downtime or approximately 29 seconds for each server on a
monthly basis. The Lenovo Systems x servers running Linux experienced 4 minutes of per
server/per annum downtime; this equals roughly 33 seconds a month for each individual server.

Page 25
Exhibit 7. IBM Power Systems, z Systems, Lenovo System x Servers
Experience Least Amount of Unplanned Annual Downtime
How much Unplanned Downtime have you
experienced, per server/per annum in minutes 2016?
21
20
13
10
6
5
4
3.5
1.27
HP ProLiant x86 with
Linux
Oracle OpenSolaris
UltraSPARC T1
Oracle x86 with Oracle
Linux
Dell PowerEdge x86 with
Linux
HP Integrity with Linux
Cisco UCS with Linux
Lenovo System x with
Linux
IBM Power Systems with
Linux
IBM z Systems w/Linux
• IBM z Systems mainframe class
servers exhibit true fault tolerance
experiencing on average jst 1.27
minutes of unplanned per server,
per annum annual downtime
• IBM Power Systems and Lenovo
System x running Linux have least
amount of downtime 3.5 minutes
per server/per year of any
mainstream Linux server platform
• 87% of IBM Power Systems and
86% of Lenovo System x users
running RHEL, SuSE or Ubuntu
Linux experience fewer than one
unplanned outage per server, per
year.
• 73% of IBM Power Systems Linux
users experience <10 minutes of
unplanned server downtime
annually
Minutes/server/annum
Source: ITIC 2016
As Exhibit 8 indicates IBM’s z13 and z13s enterprise mainframe – which is in a class by itself --
was the only mainstream server offering that had no – 0% - of prolonged unplanned system
downtime exceeding four (4) hours due to any inherent flaws in the hardware. Of the
mainstream server hardware platforms, IBM Power Systems and Lenovo System x topped the
poll besting all other server distributions.
This statistic is especially significant in light of the sharp rise in hourly downtime costs.

Page 26
Exhibit 8. IBM Power Systems, Register Least Amount of Prolonged
Unplanned Annual Downtime Exceeding Four (>4) Hours of x86 Servers
IBM Power Systems record least amount of Unplanned Downtime
of >four (4) hours on each server hardware platform (2016)
10%
10%
7%
6%
4%
3%
3%
3%
2%
2%
1%
1%
0%
Oracle x86
HP ProLiant Servers
Oracle SPARC
Dell Power Edge
Fujitsu SPARC
Toshiba Magnia
Fujitsu Primequest
HP Integrity
Cisco UCS
Fujitsu Primergy
Lenovo System x
IBM Power Systems
IBM z Systems
***NOTE: IBM sold its System x86 server hardware
business to Lenovo 18 months ago; Lenovo System x
servers continue to maintain the same high level of
uptime/reliability as they did under the IBM brand.
Source: ITIC 2016
Cisco UCS Comes On Strong, HP Reliability Rebounds
Cisco’s UCS servers also achieved high reliability scores; 86% of respondents stated they
experienced 40 minutes or less of annual downtime. Survey respondents also gave Cisco UCS
high customer satisfaction marks; 70% of participants rated it “excellent” or “very good.”
Cisco, like IBM also has strong, solid management and has ably managed the executive
management transitions. On July 26, 2015 when longtime CEO John Chambers stepped down
(he’s still Executive Chairman of the Board and Advisor to the CEO), Chuck Robbins stepped in
to fill his shoes. Cisco has not been immune to the upheaval and contractions in the high
technology market sector – since 2013, the company has restructured and cut approximately
10,000 workers in two separate rounds of layoffs, representing about 14% of its global
workforce. On the plus side, Cisco continues to make targeted acquisitions, invest heavily in
R&D and forge ahead into new markets most notably the Internet of Things (IoT). In April,

Page 27
2014, Cisco Systems launched a $150 Million initiative to fund IoT startups. All of these efforts
in turn, help both the visibility of the Cisco brand and further the functionality and performance
of its core networking gear and UCS platforms. This is evidenced by the high marks survey
respondents gave to Cisco UCS reliability and to its technical service and support organization in
both the 2015 and 2016 surveys.
Server Virtualization Reliability
Virtualization is another key technology that has a pivotal impact on network reliability,
particularly in the Digital Age. The benefits of virtualization are well known and well
documented. Organizations are consolidating various workloads onto fewer servers to cut
hardware costs; optimize facility space, conserve and cut manpower costs and administrative
resources and lower power consumption.
However, this can be a two-edged sword. Businesses that fail to properly configure and right size
workloads and adequately secure their environments run the risk of increased downtime and
disrupting productivity. These are two very important considerations – particularly as companies
interconnect more devices, applications and people and migrate to the cloud and the Internet of
Things (IoT). Mobile workers and Bring Your Own Device (BYOD) can also potentially strain
and undercut reliability if organizations fail to take the time and ensure end-to-end security and
accountability as users, business partners and customers access the corporation’s network and
crucial data assets. Increased functionality and connectivity offers the potential for greater
economies of scale and opportunity. But to reiterate without the proper controls, correct
configuration, strong security and adequate server hardware, the virtualization environment can
turn into a giant Achilles Heel that can result in a higher degree of collateral damage because
multiple instances of an application(s) are housed in a single server platform.
Over three-quarters of midsized and enterprise corporations utilize virtual servers for their
business critical mainstream applications and workloads. IBM Power VM, Cisco UCS and Dell
servers with Windows Server 2008 R2 Hyper-V were the top three most reliable hardware
virtualization platforms (see Exhibit 9). Virtualization market leader VMware was in the middle
of the pack with 59% of VMware vSphere customers reporting just one to 10 minutes of
unplanned downtime followed by 52% of HP UX Virtualization Continuum businesses who had
up to 10 minutes of unplanned per server/per annum downtime. One big surprise was that 60%
of Dell Virtualization systems running Microsoft Hyper-V experienced one to 10 minutes of
unplanned downtime compared to the 54% of Dell Virtualization systems running VMware.

Page 28
Exhibit 9. IBM Power VM, Cisco UCS and Dell Score High Marks for Virtualization
Reliability
Estimate the amount of downtime experienced on each of your server
hardware virtualization layers over the past 12 months (Select ALL that apply)
51%
54%
60%
42%
52%
63%
61%
52%
49%
59%
62%
18%
24%
25%
20%
26%
24%
23%
25%
17%
17%
23%
15%
16%
13%
24%
18%
10%
11%
19%
20%
18%
7%
8%
3%
4%
6%
2%
2%
3%
3%
2%
3%
0%
4%
3%
2%
3%
3%
3%
2%
1%
4%
3%
4%
4%
5%
8%
Windows Server 2012 Hyper-V
Dell virtualization w/VMware
Dell virtualization w/Windows Server
2008 Hyper-V
HP ProLiant iVirtualization
HP UX Virtualization Continuum
IBM Power VM
Lenovo System x
Oracle VM Server for x86
Oracle VM Server for SPARC
VMware/vSphere
Cisco UCS
1 to 10 minutes 11 to 20 min 31 to 50 min 1 to 2 hours 2 to 4 hours > 4 hours
Source: ITIC 2015
Cost of Hourly Downtime Soars
The only good downtime is no downtime.
As companies grow ever more reliant on their interconnected networks and applications to
conduct business, the cost of downtime is rising commensurately. To put it bluntly: if the servers,
applications and networks are unavailable for any reason business and productivity slow down
or come to a complete halt.
For the fourth straight year, the survey data indicates that the cost of hourly downtime increased.
As Exhibit 10 shows below, 98% of organizations say that a single hour of downtime costs over
$100,000; 81% of respondents indicated that 60 minutes of downtime costs their business over

Page 29
$300,000 and a record one-third or 33% of enterprises report that one hour of downtime costs
their firms $1 million to over $5 million.
Exhibit 10. Cost of Hourly Downtime Soars: 81% Say it Exceeds $300K
Hourly
Cost of Hourly Downtime for Enterprises in 2016
0%
1%
1%
7%
10%
24%
13%
11%
12%
7%
14%
Up to $10,000
$10,000 to $50,000
$50,000 to $100,000
$101,000 to $200,000
$201,00 to $300,000
$301,000 to $400,000
$401,000 to $500,000
$501,000 to $1 Million
$1M to $2M
$2M to $5M
>$5M
A 98% majority of respondents
say that a single hour of
downtime per year costs their
company over $100,000.
An 81% majority say the cost
exceeds $300,000 up from 76% in
2014. And 33% -three in 10
enterprises - say hourly downtime
costs their firms $1M to >$5M.
Source: ITIC 2016
These statistics reinforce what everyone knows: infrastructure matters. Server hardware, server
OS and application reliability or instability, does have a direct and far reaching impact on the
corporate bottom line and ongoing business operations. Unreliable systems can result in lost
productivity, lost data and of course, monetary losses. Additionally, it can irreparably damage
the corporation’s reputation and result in lost business. In some extreme cases, business and
monetary losses as a result of unreliable servers can cause the company to go out of business – as
a consequence of sustained losses and possible litigation brought on by the outage.
Conclusions and Recommendations

Page 30
In summary the ITIC 2016 Global Server Hardware and Server OS Reliability Survey results
show that IBM Power Systems, z13 and the latest z13 Systems mainframes and Lenovo x86
servers continue to achieve best in class reliability.
The IBM and Lenovo servers also achieved the highest customer rankings for service and
support. As part of its agreement when it sold the x86 server business to Lenovo, IBM agreed to
honor existing support agreements for five years after the sale – so through the year 2019.
Server operating system reliability also continues to improve. All of the server operating system
platforms continue to exhibit a high degree of reliability. However, the IBM AIX 7.2 operating
system; Ubuntu 14.04 and 15.10 (Ubuntu 16.04 is due out in April 2016); HP UX 11i v3 Update
14 and Red Hat Enterprise Linux v 7.x are the top four most reliable server OS distributions.
The most common causes of software OS glitches and failures are attributable to integration and
interoperability issues and organizations’ failure to update their OSes with the latest patches and
security upgrades.
Server hardware reliability shows similar year-over-year improvements. Among the “work
horse” mainstream systems: IBM Power Systems, Lenovo System x and Cisco UCS have the
highest levels of inherent reliability.
Organizations must have confidence in the reliability and stability of their server hardware and
server OS platforms. The advances in technology suggested by the ITIC 2015 -2015 Global
Server Hardware and OS Reliability Survey results are encouraging. But advanced technology is
just one component, albeit a crucial factor in fortifying and maintaining reliability.
Vendors must deliver reliable products and top notch technical service and support. Corporations
also bear responsibility for keeping their IT departments well staffed and providing the necessary
training and certification to IT administrators. Achieving optimum uptime means upgrading
refreshing server hardware as necessary in order to support more data intensive workloads and
physical, virtual and cloud environments. Close attention must be paid to system integration and
interoperability, patch management and documentation. Business performance will almost
certainly suffer if server configurations are inadequate for current tasks and requirements.
Companies should monitor their service level agreements (SLAs) to ensure that they meet the
desired reliability levels. If they do not, corporations should ascertain the cause and make the
necessary improvements.
Reliability is among the most crucial metrics in the organization. Improvements or declines in
reliability mitigate or increase technical and business risks to the organization’s end users and its
external customers. The ability to meet service-level agreements (SLAs) hinges on server
reliability, uptime and manageability. These are key indicators that enable organizations to
determine which server operating system platform or combination thereof is most suitable.

Page 31
To ensure business continuity and increase end user productivity, it is imperative that businesses
maximize the reliability and uptime of their server hardware and server operating systems. An
81% majority of corporations now require “four nines” or 99.99% minimum uptime. Businesses
should regularly replace, retrofit and refresh their server hardware and server operating systems
with the necessary patches, updates and security fixes as needed to maintain system health. The
onus is also on the server hardware and server operating system vendors to provide realistic
recommendations for system configurations to achieve optimal performance. Vendors also bear
the responsibility to deliver patches, fixes and updates in a timely manner and to inform
customers to the best of their ability regarding any known incompatibility issues that may
potentially impact performance. Vendors should also be honest with customers in the event there
is a problem or delay with delivering replacement parts.
Time is money. Even a few minutes of downtime can result in significant costs and cause
internal business operations to come to a standstill. Downtime can also impact adversely a
company’s relationship with its customers, business suppliers and partners. Reliability or lack
thereof can potentially damage a company’s reputation and result in lost business.
Recommendations
ITIC strongly advises organizations to regularly measure the uptime and reliability of their main
LOB server hardware, server operating systems and applications. Being cognizant of specific
uptime and reliability statistics will enable the business and its IT department to identify baseline
metrics associated with all of their individual platforms. It will also provide companies with an
accurate assessment of the inherent reliability and flaws in their hardware and software. They
can then compare and contrast that with downtime resulting from other issues such as:
integration and interoperability; lack of readily available patches or fixes; problems with ISPs
and carriers and unpredictable or unavoidable outages due to natural or manmade disasters.
This in turn, provides businesses with a mechanism to accurately assess the amount of downtime
and it subsequent impact on business operations, the IT department and the productivity of its
end users. The ability to measure reliability also helps organizations gauge how downtime affects
external business partners, customers and suppliers.
To optimize uptime and reliability, ITIC advises corporations to:
 Regularly analyze and review configurations, usage and performance levels. This
will enable companies to determine whether or not their current server and server OS
environment allows them to achieve optimal reliability.
 Don’t Wait to Update; refresh and upgrade the Server Hardware as needed to
accommodate more data intensive and virtualized workloads. The server hardware

Page 32
(standalone, blade, cluster, etc.) and the server operating system are inextricably linked.
To achieve optimal performance from both components, corporations must ensure that
the server hardware is robust enough to carry both the current and anticipated workloads.
Applications are getting larger. The number and percentage of virtualized servers
continues to increase. Virtual servers hosting multiple instances of mainstream LOB
business critical applications demands robust hardware. Organizations should purchase
the beefiest server configuration their budgets will allow. Waiting four, five or six years
to refresh servers while placing greater demands on the hardware, is asking for trouble.
 Adopt formal SLAs. Service level agreements enable organizations to define acceptable
performance metrics. Companies should meet with their vendors and customers on at
least an annual basis to ensure the terms are met.
 Define measure and monitor reliability and performance metrics. It is imperative that
companies measure component, system, server hardware, server OS and desktop and
server OS, security, network infrastructure, storage and application performance.
Maintain records on the amount of planned and unplanned downtime.
 Regularly track server and server OS reliability and downtime. Keep accurate
records of outages and their causes. Segment the outages according to their severity and
length – e.g., Tier 1, Tier 2 and Tier 3. The appropriate IT managers should also keep
detailed logs of remediation efforts in the event of the outage. These logs should include
a full account of remediation activities, specifying how the problem was solved, how
long it took and what staff members participated in the event. It should also list the
monetary costs as well as any material impact on the business, its operations and its end
users. This will prove invaluable resource should the problem recur. It may also make the
difference in containing or curtailing the reliability-related incident, saving precious time
for the IT department, the end users and corporate customers.
 Calculate the cost of unplanned downtime. Companies should determine the average
cost of minor Tier 1 outages. They should also keep more detailed cost assessments of the
more serious unplanned Tier 2 and Tier 3 incidents. It’s essential for businesses to know
the monetary amount of each outage – including IT and end user salaries due to
troubleshooting and any lost productivity – as well as the impact on the business. C-level
executives and IT managers should also pay close attention to whether or not the
company’s reputation suffered as a result of a reliability incident; did any litigation
ensue; were customers, business partners and suppliers impacted (and at what cost) and at
least try and gauge whether or not the company lost business or potential business.
 Compile a list of best practices. Chief technology officers (CTOs), Chief Data Officers
(CDOs), software developers, engineers, network administrators and managers should
have extensive familiarity with the products they currently use and are considering.
Check and adhere to your vendors’ list of approved, compatible hardware, software and
applications.
 Train and certify IT administrators. Don’t be penny wise and pound foolish. If your
company can’t afford the expense or time to certify the entire IT department, designate

Page 33
the most experienced or appropriate member of the team to get trained and let that person
train the other IT staffers.
 Perform regular asset management testing. Schedule asset management reviews on a
yearly, bi-annual or quarterly basis, as needed. This will assist your company in
remaining current on hardware and software and help you to adhere to the terms and
conditions of licensing contracts. All of these issues influence network reliability.
Survey Methodology
ITIC’s 2015 - 2015 Global Server Hardware and Server OS Reliability Survey, polled C-level
executives and IT managers at over 550 corporations worldwide throughout June and July
2015. The independent Web-based survey included multiple choice questions and one Essay
question. In order to ensure objectivity, ITIC accepted no vendor sponsorship and none of the
participants received any remuneration. ITIC analysts also conducted two dozen first person
customer interviews to validate or repudiate the Web survey responses and obtain anecdotal
data. The anecdotal data provides broad and in-depth insight into the business and technology
challenges confronting corporations in both the immediate and long term. ITIC employed
authentication and tracking mechanisms to prevent tampering and to prohibit multiple
responses by the same parties.
Survey Demographics
Companies of all sizes and all vertical markets were represented in the survey. Respondents
came from companies ranging from small and medium businesses (SMBs) with fewer than 50
workers, to large enterprises with more than 100,000 employees.
All market sectors were equally represented: SMBs with one to 100 employees accounted for
33% of the respondents. Small and medium enterprises (SMEs) with 101 to 1,000 workers
represented 30% of the participants and the remaining 37% of respondents came from large
enterprises with 1,001 to over 100,000 employees. Survey respondents hailed from 49 different
vertical markets. Approximately 84% of respondents hailed from North America; 16% were
international customers who hailed from more than 20 countries throughout Europe, Asia,
Australia, New Zealand, South America and Africa.
Appendices
This section contains a list and links to the various ITIC statistics and surveys cited in this
Report.

Page 34
ITIC Website and links to survey data and blog posts:
http://itic-corp.com/blog/2015/02/iticknowbe4-security-survey-56-of-corporations-have-no-
proactive-response-plan-to-deal-with-byod-security-hacks/
http://itic-corp.com/blog/2013/07/one-hour-of-downtime-costs-100k-for-95-of-enterprises/
http://itic-corp.com/blog/2011/04/itic-2011-reliability-survey-users-give-ibm-aix-v7-windows-
server-2008-r2-highest-security-marks/
http://itic-corp.com/blog/2011/02/itic-reliabiity-survey-oracle-users-anxiousangry-over-service-
support-slippage/

Itic 2016 global server hardware, server os reliability report

More Related Content

What's hot (20)

Viewers also liked (16)

Similar to Itic 2016 global server hardware, server os reliability report (20)

More from Diego Alberto Tamayo (20)

Recently uploaded (20)

Itic 2016 global server hardware, server os reliability report