Kyl 200 u user manual

Shenzhen KYL Communication Equipment Co., Ltd
Shenz Co.

KYL-200U Micro Power Wireless
Transceiver Data Module


Address: Unit 5-7, Building3, Huangdu Square, South of Exhibition Center, Yitian
Road, Futian District, Shenzhen Guangdong China

Tel: +0086-755-83410815
Fax: +0086-755-83408785
Skype
Skype：lxmlosia
Yahoo messenger: losia2012@yahoo.com
MSN: kylcom01.com@hotmail.com
E_mail: sales01@rf-data.com /kyl03losia@gmail.com
Website: http://www.rf-data.com

Fax: +0086-755-83408785
0086- 755-83408785 kyl03losia@gmail.com www.rf-data.com 1

Shenz Co.

Catalogue
I. About KYL-200U ....................................................................3

II. Features of KYL-200U ..........................................................3

III. Applications of KYL-200U.................................................. 4

IV. How to use KYL-200U..........................................................4
KYL-200U..........................................................4

V. Networking Application of KYL-200U............................... 14

VI. Technical specification of KYL-200U................................ 14

VII. Description of type.............................................................. 15

Fax: +0086-755-83408785

Shenz Co.

Before using the product please read the use manual carefully.
Any question in technical, you can contact us.
Tel: +0086-755-83410815.

I: About KYL-200U
KYL-200U, the micro power wireless transceiver data module is used as the wireless
data transceiver in short-ranges, with the small size, weight and power consumption
and good stability and reliability. Narrowband low power UHF wireless data
transmitters and receivers with channel spacing as low as 25 KHz.

II: Features:
I. Features of KYL-200U
1. Low power transmission with 10mW, 50~100mW is available if needed.
2. With 433MHz as factory default carrier frequency, but 400-470MHz, 868MHz,
915MHz is available if needed.
3. High anti- interference and Low BER (Bit error Rate)
Based on the Gaussian Frequency Shift Keying (GFSK) modulation, the
high-efficiency forward error correction channel encoding technology is used to
enhance data’s resistance to both transient interference and random interference and
the actual bit error rate of 10-5 ~ 10-6 can be achieved when channel bit error rate is
10-2.
4. Long Transmission Distance
Within the visible range, when the height of antenna is higher than 2m and The Bit
Error Rate (BER) is 10-3, the reliable transmission distances respectively is 1000m
@1200bps, and is 600m@9600bps.
5. Transparent data transmission
Transparent data interface used in transceivers is for meeting many standard or
nonstandard user protocols. Any false data generated in air can be filtrated
automatically (What has been received is exactly what has been transmitted).
6. Multi-channels
KYL-200U transceivers offer 8 channels, if needed, 16 or 32 channels are available
to satisfy various configuration of communication under user’s demand at the same
time.
7. 2 ports with three connection methods
KYL-200U transceivers provide 2 ports with three connections, ports: a UART
interface of TTL level, a non-standard RS-232 port and a non-standard RS-485
port.
8. Big data buffer area
With optional interface baud rate: 1200/4800/9600/19200bps and 8N1/8E1/8O1
data format (set by user), the transceiver can transmit unlimited data frames with
flexible user program.
Note: the RF data rate is only settled down before delivery, please inform our sales
when placing your orders.
Fax: +0086-755-83408785

Shenz Co.

9. Intelligent data control and no any extra programs required
Even for half duplex communication, no any excessive programs required. All RF
system data transmission/reception and other On-the-Fly conversion and control are
performed by KYL-200U transceivers automatically.
10. Lower power consumption & Sleep function
With +5V power, the receiving current is less than 20mA, the transmitting current
is less than 40mA, and the sleeping current is less than 20uA.
11. High reliability, small and light
By using monolithic radio-frequency integrated circuit and single-chip MCU, the
transceivers have less peripheral circuit s, high reliability, and low failure rate.
12. More options of configurable antennas for user different applications.
13. Watchdog monitor
Watchdog monitors the inner function, so it can change the traditional product
structure and also improve the reliability of our modules.

III: Application of KYL-200U:
KYL-200U the micro power wireless transceiver data module is suitable for:
* AMR Automatic Meter Reading
* Wireless alarm and security systems
* Building automation, security, wireless monitoring and control of room equipment,
Access Control System;
* Wireless data transmission, automatic data collection system;
* Radio modem can be used for Sports training & competition;
* Wireless dishes ordering;
* Wireless POS, PDA wireless smart terminal;
* RF modem can be used for Electronic bus station and intelligent traffic;
* RF transmitter Wireless electronic display screen and queuing machine;
* Wireless telemetry Charging for parking, parking lot;
* Wireless modem Automobile inspection and four-wheel orientation;
* Wireless sensor Industrial wireless remote control and air conditioning remote
controller;
* Data communication used for railway, oil field, dock and army.
* LED display in thruway and public places
* Point to multi-point wireless network, wireless on-the-spot bus and automatic data
collection system;

IV: How to use the KYL-200U
KYL-200U provide RS-232, RS-485 and UART/TTL level interface port for direct
connection with PC, RS485 devices, monolithic processors and other UART
components kinds of applications. The schematic diagram is shown below:

Fax: +0086-755-83408785

Shenz Co.

1. Power supply
The factory default setting is +5V(3.3-3.6V will inform when placing the order).By
using better ripple factor, KYL-200U transceivers can also share power supply with
other equipment. If possible, a voltage-stabilizing chip with 5V voltage is more
recommended as the only power supply than Switch power supply. But if only
switch power supply available, the jam by switch pulse to the transceivers should
be avoided. In addition, the reliable grounding must be used if there is other device
in the system equipment. In case of failing to connect with the ground, it can form
its own grounding but must be absolutely separated from the municipal electric
supply.
2. Connection Definition with terminal
KYL-200U transceivers supply one 9-pin connector (JP1), their definitions and
connection methods with terminals are shown in Table 1.

Table 1: JP1 Pin Definitions and connection methods
Pin No. Signal Name Function Level Connection Remarks
with terminal
1 GND Grounding of power supply Ground

2 Vcc Power supply DC 5V

3 RxD/TTL Serial data input to the transceiver TTL TxD

4 TxD/TTL Transmitted data out of the TTL RxD
transceiver
5 SGND Signal
6 A (TXD) A of RS-485(TxD of RS-232) A(RxD)
7 B (RXD) B of RS-485(RxD of RS-232) B(TxD)
8 SLEEP Sleep control (input) TTL Sleep signal High level
sleep
9 RESET Reset signal(input) TTL Negative
pulse reset

Fax: +0086-755-83408785

Shenz Co.

3. The connection schematic diagram between computer and our
RF module

4. Setting of channel, interface, and data format
Before using KYL-200U, the user needs to make simple configuration based on
its own needs to determine the channel,interface mode and data format. The user
can change or view the module's interface baud rate, channel and address code.
Parameter setting or reading as per the testing software KYLCOM.exe in the PC
(in products box).And the configuration is as follows:
i. Channel configuration:
Channel No. Frequency Channel No. Frequency
1 429.0325MHZ 5 433.0325MHZ
2 430.0325MHZ 6 434.0325MHZ
3 431.0325MHZ 7 435.0325MHZ
4 432.0325MHZ 8 436.0325MHZ

Note: the frequency points corresponding to each channel can be adjusted
based on the user’s needs.
user’
ii. The schematic diagram of setting the parameter as follows:
a. Connect the PC and module with RS232 data cable.
b. Open the “KYLCOM” PC software, select “English” as follows:

Fax: +0086-755-83408785

Shenz Co.

c. Click “open port”, then will open a small window as the following picture, clients
will write the parameters in this windows.

d. Click “read paras”.
“Read correct” show your connection between KYL module and PC is correct.

Fax: +0086-755-83408785

Shenz Co.

If you want to change some technical parameter, you need do as follows.
e. User can change the parameter such as channel and interface
rate and Parity mode according to actual demand through the button of the left
window. After writing the parameters in the left catalogue, click the “write para”,
then will show “write correct”. So you have finished the process for changing
technical parameter.

Fax: +0086-755-83408785

Shenz Co.

Note: The RF data rate(Air Rate) can not be set by user, it is confirmed when
placing orders and set before delivery. So please confirm the RF data rate when
placing the order.

5. Installation dimension:

Fax: +0086-755-83408785

Shenz Co.

6. The Function-indicator light
a. The LED indicator light will glitter red for 0.5S once after switched on.
b. The LED indicator light will glitter green continually while receiving data from
air.
c. The LED indicator light will glitter red continuously when transmitting data into
air after receiving from COM.
d. If the module enables the sleep function, LED indicator light is always dark.
7. Supported protocol and Transmit capability
KYL-200U standard transceivers offer transparent protocol to support various
applications and protocols of users. If the user needs to decrease his cost or ease the
workload of terminal CPU, we can add other specific functions based on the
transparent protocol, such as addressing, data acquisition, command interpretation,
etc.
8. Sleep function instruction:
Due to reducing more consumption, KYL-200U transceivers support Sleep function.
In sleep mode, the current consumption is less than 20uA.

a. How to use the Sleep function:
The Pin8 ‘SLP’ in JP1 is the signal of sleep control. In high power level,
transceiver stays in working mode. In low power level (<0.5V), transceiver stays
in sleep mode. The SLP signal can convert transceiver from working to sleep
mode in 1ms after falling edge. If the Sleep signal arrives when the transceiver is
transmitting data, the module will enter sleep mode after finishing transmission.
From sleep mode to working, it takes the transceiver 1ms after rising edge.
To disable the opened sleep function of KYL-200U, the SLP (SLEEP) pin
should be definitely connected with 0 or ground.
b. Attentions about use of sleep function:
When the sleep function enabled, any supply glitches, such as switch dithering,
Fax: +0086-755-83408785

Shenz Co.

fire striking or quick switching on and off, could cause the transceiver to be
switched to the wrong sleep mode.
After switching on, users can avoid this error by making a compulsive
restoration once after the CPU delays 100ms.
Sleep Timing Diagram:

9. The attentions of data transmission
a. The delay time (tc) of conversion between transmitting and receiving is less than
1ms.
Timing diagram:

b. The delay time of transceivers between the first bit sent by TxD to the first
bit received by RxD.
Due to a data processing will be made on user’s data by KYL-200U transceiver
using FEC (Forward Error Correction) or other correction algorithm, when RxD
of a KYL-200U transceiver ‘A’ receives the data, then transmits it, the other one
transceiver ‘B’ will have a delay (ts) to receive and transmit by TxD. Different
RF data rate causes different delay time. Please see the specific delay time
below:

Fax: +0086-755-83408785

Shenz Co.

RF Date Rate Delay RF Date Rate Delay
(bps) Ts(mS) (bps) Ts(mS)
1200 90 9600 16
2400 48 19200 10
4800 30

Timing diagram:

c. Error dealing procedure:
To enhance the reliability and stability of user’s systems, a verify bit or a Cyclic
Redundancy Check (CRC) mode is highly recommended to resent the wrong
information while using KYL-200U modules.
d. Large-number data transmission
In theory, when the interface data rate is faster than the RF data rate, KYL-200U
transceivers can sent unlimited-long data package, but any long packages more
than 120B are not recommended. The length of each package should be between
60~100B. We also recommend user to resent the wrong information using
Automatic Error Request Equipment (ARQ).
The analyzing as below:
What if the actual transmission BER (Bit Error Rate) is 10-4, 1 packet with 1KB
data, which is about 10-thousand bits, is sent, theoretically, at least 1 bit will be
received wrongly, then the 1KB information will never be received correctly.
But if we package the data into 10 packets with 100B for each, when all 10
packets are sent, there will be only 1 packet wrong according to this probability.
After that, resend this wrong packet using ARQ mode. So by resending one more
packet and the efficiency rate is reduced 10%, all data will be absolutely received
correctly.

10. Antenna configuration:
Many appropriative antennas for low power RF modules are selected for meeting
different user antenna configurations. Please ask our Sales office for further
Fax: +0086-755-83408785

Shenz Co.

information about the antenna’s dimension and performance.
a. Helical SMA antennas
KYL-ANT-433-10-SMA: 100mm helical SMA antennas with high gain and low
cost, reach a long distance.

KYL-ANT-433-3-SMA: 28mm SMA helical antenna with magnetic core, small size,
beautiful appearance (like the mobile phone antenna)

KYL-ANT-433-10-ZSMA: 100mm SMA helical antenna with folding joint, easy for
adjusting the direction and fixing.

b. Magnetic vehicle antenna
KYL-ANT-O433S-300H1.5-SMA: include magnetic antenna base, suitable for
equipment with metal shell, easy for fixing, effective to enhance the transmission
distance.

More kinds of antenna, please browse our website:
http://www.rf-data.com/Products_list_en.asp?classid=163
If the user has special demands on antennas, we can design and produce for them
specially.

V. Networking Application of KYL-200U
The communication channel of KYL-200U is half duplex, which is most suitable
for the communication mode of point to multi-point. Under this mode, one
master station must be set, and all of the rest are slave stations. A unique address
Fax: +0086-755-83408785

Shenz Co.

is given to each station. The coordination of communication is controlled by
master station that uses data frames containing address code to transmit data or
command. Slave station will receive all of the data and command and compare
the received address code with local address code. If they are different, the data
will be deserted without any response. If those address codes are the same, it
means the data is sent to the local. Slave station will make different responses
according to the transmitted data or command and send back the data of response.
All these jobs must be performed by upper protocol, and it is assured that there is
only one transmitter-receiver in the state of transmission in the communication
network at any instant moment so as to avoid the cross-interference.
KYL-200U can also be used for point-to-point communication with easier
operation. For the programming of serial port, all you have to do is to remember
that its communication mode is semi duplex while always observing the time
sequence of come-and-go for receiving and transmitting.

VI. Technical specification of KYL-200U
* Modulation mode: GFSK/FSK
* Working frequency: 400MHz~470MHz, 868MHz, 915MHz;
* Power supply: DC 5V (3.3~3.6V informed when placing the order);
* RF power: ≤10mW, 50mW~100mW is available;
* RF data rate: 1200/2400/4800/9600/19200bps (Set before delivery);
* Receive current: <20mA (TTL connect);
* Receive sensitivity: -120dBm (1200bps); -115dBm (9600bps);
* Transmitting current: <40mA;
* Sleep current: <20uA;
* Interface data format: 8E1/8N1/8O1;
* Working humidity: 10%~90% relative humidity without condensation;
* Working temperature: -35℃~+75℃( industrial)
* RF Line-of-sight Range: 600m(BER=10-5@9600bps);
1000m(BER=10-5@1200bps)；
* Size: 47mm*26mm*10mm (without antenna port).

Fax: +0086-755-83408785

Shenz Co.

VII. Description of type

KYL-200U-96
Baud Rate
12:1200bps
manufacturer type
24:2400bps
48:4800bps
96:9600bps
192:19200bps

Fax: +0086-755-83408785

Kyl 200 u user manual

More Related Content

What's hot (17)

Similar to Kyl 200 u user manual (17)

Recently uploaded (20)

Kyl 200 u user manual