Lagoa series rev.
1 like547 views
The Lagoa series diaphragm dosing pumps are designed for metering a wide variety of chemicals and liquids. They offer simplicity, reliability, and availability with delivery within 2-6 days. The pumps feature electro-mechanical operation, robust construction, and adaptable pumpheads for metering different fluids. Applications include food processing, environmental, and various industrial uses.
Lagoa series rev.
- 1. Lagoa Series Diaphragm dosing pumps PCM PRECI POMPE Simple, reliable, deliverable Applications within 2 to 6 days Food • Metering of alkaline and/or acid products and disinfecting solutions Lagoa Series into installed cleaning systems (CIP) • Metering of fermentation products and renet in the dairy industry Diaphragm dosing pumps • Metering of anti-foaming products • Metering of flavoring, coloring agents and yeasts Simple, reliable, deliverable within 2 to 6 days • Metering of citric acid and ascorbic acid • Metering of sugar syrup • Metering of arabic gum, sulfur anhydride, casein and gelatine as additives in wine-production • Metering of diatomaceous earth (filtration of brine baths) • Metering of liquid fertilizer Pump on filtering pallet (wine production) Industry • Surface treatment: Designed & realised by www.altavox.biz - E-TD0053LAG 05-05 — PCM reserves the right to change this data at all times. This document was printed with toxic-free ink. - Metering of degreasing agents and surfagents for surface preparation - Metering of hydrochloric acid and inhibitor - Additions of chromic acid for electrophoresis - Additions of sulfuric acide or phosphoric acid to top-up bath levels - Metering of wetting agent for coil coating • Foundries: proportional metering of resin and catalyzer in the production of sand moulds • Paper-making: metering of coloring agents and anti-foaming agents • Textiles: metering of coloring agents • Cement: metering of wetting agent, waterproofing agent and water-reducing plasticizer in the production of plasterboard • Tile production: metering of coloring paste • Timber: metering of fungicide Metering of soda and acid Environment • Metering of coagulants: polymer of viscosity lower than 1500cP (polyacrylamides). Injection of diluted polymer into concentrated ludges can decrease pressure losses and thereby contribute to HEAD OFFICE reducing operating costs • Metering of coagulants such as ferric chloride, ferric sulfate, ferrous UNITED STATES FRANCE CHINA sulfate, alumina sulfate, aluminum chloride (WAC, PAC) Tel: +1 713 896 4888 PCM S.A. Tel: +86 (0)21 62362521 • Metering of anti-foaming products Fax: +1 713 896 4806 17 rue Ernest Laval - BP 35 Fax: +86 (0)21 62362428 92173 VANVES Cedex • Metering of alkaline and acidic products: hydrochloric acid, phosphoric pcmdelasco@pcmdelasco.com pcmchina@pcm.eu FRANCE acid, nitric acid and soda www.pcmdelasco.com www.pcm.eu Tél : +33 (0)1 41 08 15 15 • Metering of biocides and disinfectants for preventing the develop- Fax : +33 (0)1 41 08 15 00 ment of bacteria (sodium or calcium hypochlorite, or chorine bioxide) contact@pcm.eu • Metering of hydrazine (elimination of oxygen dissolved in boiler water) www.pcm.eu • Metering of sodium carbonate for re-establishing the calcium/carbon balance in water • Metering of methanol (atex), phosphoric acid and urea as nutrients. UNITED KINGDOM GERMANY TUNISIA THAILAND RUSSIA Tel: +44 (0)1536 740200 Tel: +49 (0)611 60977-0 Tel: +216 71 238 138 Tel: +66 (0)34 246 012 Tel: +7(812)320 70 96 Fax: +44 (0)1536 740201 Fax: +49 (0)611 60977-20 Fax: +216 71 231 713 Fax: +66 (0)34 297 022 Fax: +7(812)320 75 12 sales@pcmpumps.co.uk info@delasco.de pcmtunisie@pcm.eu mwitayat@pcm.eu pcmrussia@pcm.eu www.pcmpumps.co.uk www.delasco.de www.pcm.eu www.pcm.eu www.pcm.eu Ferric chloride pumping in purification station
- 2. P C M Po m p e s The Lagoa series is designed for metering a wide variety Lagoa Series Diaphragm dosing pumps Simple, reliable, deliverable Lagoa series: of products in chemical engineering, environmental Understanding model designation within 2 to 6 days S i m p l i c i t y, r e l i a b i l i t y Drive a n d av a i l a b i l i t y applications as well as the food and personal care industries ▲ The pump is driven by a direct mounted light alloy Pumphead type motor with IP55 protection. The bearings are greased LG1 U 50 T U Polypro for life, making the motors maintenance-free. H PVC Advantages ▲ S Stainless steel Hydraulics size Pumphead type Nominal flow Drive unit type SA Stainless steel with food connections Of electro-mechanical drive • Reduced mechanical and hydraulic shocks • Silent • Does not cause and is not affected Pumphead Applicable directives and standards Performances by interference ▲ The pumphead is easy to remove and change. Flow at 1 bar - 50Hz Flow at Pmax - 50Hz Pressure Rate Power (1) Model Pumpheads 10 % 100 % 10 % 100 % max** 50Hz Mono (M) Three (T) Of the design • Simple and robust construction It consists of: - 1 suction check valve FDA l/h l/h l/h l/h bar strokes/min W W LG1 - 4 1 4 0 3,3 12 48 60*** 60 • Reliability of metering - 1 discharge check valve LG1 - 20 3 18,5 1 15 10 48 60*** 60 • Adaptable: meters a wide range of fluids - 1 liquid end body The pumps in the Lagoa series meet the LG1 - 50 10 47 2 42 5 120 60*** 60 • Simplified maintenance machine directive requirements and its Pumpheads are available in many material LG2 - 20 U, H, S, SA 6 20 0,5 16 10 48 - 120 harmonized standards. • Dry running combinations as shown in the table on the LG2 - 50 12 51 2 45 10 120 - 250 next page. • • • • • • • • • • • LG2 - 140 25 145 10 127 7.5 48 - 120 LG2 - 350 70 350 40 330 5 120 - 250 Technical data Note: other versions are available on request. LG2 - 350 duplex * U, H, S 140 700 80 660 5 120 - 250 • Maximum flow: 350l/hr per pumphead * asynchronous pumpheads - ** maximum pressures are stated at 20°C - *** available with the U pumphead only. • Adjustable from 10 to 100% Accessories • Maximum pressure: 12 bar Flow rate (Q) Curves Q / P Flow rate (Q) Curves Q / P • Maximum temperature: 100°C PCM offers you a comprehensive range in l/h in l/h • Speed: 48 and 120 strokes/min of solutions to enable you to achieve high-performance metering regardless of 50 800 • Precision: ± 1% • Linearity: ± 3% the working conditions of your installation. LG1 - 50 LG2 - 350 duplex 40 600 Deliverable within 2 to 6 days. Foot valves Filter undesirable Locking device particles and keep the ▲ Operation The stroke adjustment pump primed when 30 400 The Lagoa pump is composed of a membrane mechanism can be locked in stopped. LG2 - 350 connected to a piston of which the alternating position to ensure that stroke Diaphragm movement successively fills and empties the length remains at its set point. 20 200 ▲ Preformed type, made of PTFE reinforced Injection rod pumphead. with elastomer. The liquid contact part is Enables your product LG1 - 20 1 The backward movement of the membrane in chemically inert PTFE. LG2 - 140 to be injected in a vein opens the bottom check valve and allows the 10 100 entry of fluid, which fills the pumphead. without polluting the injection pipework LG2 - 50 2 The forward movement of the membrane closes LG1 - 4 (non-return function). LG2 - 20 the bottom check valve, opens the top check Pressure (P) in bar Pressure (P) in bar 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 valve and expels the dose. Safety and retention valves Prevent excess flow and Overall Dimensions Connections pressures, siphoning L l A B C Pumphead type Model Pumphead size and underloading. mm mm mm mm mm U H S SA Casing LG1 - 4 294 160 65.5 58.5 136 4 4x8 flexible hose 1 - Suction phase ▲ Robust cast aluminium LG1 - 20 302 160 65.5 58.5 168 or 10-16 PVC pipe 1/2" DIN DN10 Pulsation dampers 302 160 65.5 58.5 168 20 6x12 flexible hose G male male alloy construction. LG1 - 50 To render your flow 50 or 10-16 PVC pipe 1" G male LG2 - 20 375 210 114.5 58.5 168 140 linear and lessen LG2 - 50 375 210 114.5 58.5 168 350 1" G male 3/4" SMS 25 male fluid hammer effects. LG2 - 140 429 223 159 59 246 G female 350 duplex — LG2 - 350 429 223 159 59 246 LG2 - 350 duplex 429 389 159 59 246 Stroke adjustment "Ready-to-meter" ▲ The capacity is set by turning the micrometer assemblies dial which is fitted with vernier scale graduated You connect the assembly 165 in percentage stroke length. to the pump and you are Electric servo control can be fitted (1). ready to start ! Possibility of multiplexing for: 321 299 321 = 2 - Discharge phase = - performing proportional metering with different C C fluids (a resin and a hardener, for example) 75 Dosunits (1) = 75 = - obtaining a greater flow than with one single Complete metering 4 4 8 fixation A 148 B 139 pumphead units on a 120 to 1000 l fixation A 172 B fixation 139 139 26 139 L holes 160 holes holes Ø6mm L - phasing the pump stroke to prevent pulsations capacity HDPE tank. Ø6mm Ø6mm and thereby achieving linear flow. (1) Please contact us Lagoa LG1 Lagoa LG2 Lagoa LG2 Duplex
- 3. P C M Po m p e s The Lagoa series is designed for metering a wide variety Lagoa Series Diaphragm dosing pumps Simple, reliable, deliverable Lagoa series: of products in chemical engineering, environmental Understanding model designation within 2 to 6 days S i m p l i c i t y, r e l i a b i l i t y Drive a n d av a i l a b i l i t y applications as well as the food and personal care industries ▲ The pump is driven by a direct mounted light alloy Pumphead type motor with IP55 protection. The bearings are greased LG1 U 50 T U Polypro for life, making the motors maintenance-free. H PVC Advantages ▲ S Stainless steel Hydraulics size Pumphead type Nominal flow Drive unit type SA Stainless steel with food connections Of electro-mechanical drive • Reduced mechanical and hydraulic shocks • Silent • Does not cause and is not affected Pumphead Applicable directives and standards Performances by interference ▲ The pumphead is easy to remove and change. Flow at 1 bar - 50Hz Flow at Pmax - 50Hz Pressure Rate Power (1) Model Pumpheads 10 % 100 % 10 % 100 % max** 50Hz Mono (M) Three (T) Of the design • Simple and robust construction It consists of: - 1 suction check valve FDA l/h l/h l/h l/h bar strokes/min W W LG1 - 4 1 4 0 3,3 12 48 60*** 60 • Reliability of metering - 1 discharge check valve LG1 - 20 3 18,5 1 15 10 48 60*** 60 • Adaptable: meters a wide range of fluids - 1 liquid end body The pumps in the Lagoa series meet the LG1 - 50 10 47 2 42 5 120 60*** 60 • Simplified maintenance machine directive requirements and its Pumpheads are available in many material LG2 - 20 U, H, S, SA 6 20 0,5 16 10 48 - 120 harmonized standards. • Dry running combinations as shown in the table on the LG2 - 50 12 51 2 45 10 120 - 250 next page. • • • • • • • • • • • LG2 - 140 25 145 10 127 7.5 48 - 120 LG2 - 350 70 350 40 330 5 120 - 250 Technical data Note: other versions are available on request. LG2 - 350 duplex * U, H, S 140 700 80 660 5 120 - 250 • Maximum flow: 350l/hr per pumphead * asynchronous pumpheads - ** maximum pressures are stated at 20°C - *** available with the U pumphead only. • Adjustable from 10 to 100% Accessories • Maximum pressure: 12 bar Flow rate (Q) Curves Q / P Flow rate (Q) Curves Q / P • Maximum temperature: 100°C PCM offers you a comprehensive range in l/h in l/h • Speed: 48 and 120 strokes/min of solutions to enable you to achieve high-performance metering regardless of 50 800 • Precision: ± 1% • Linearity: ± 3% the working conditions of your installation. LG1 - 50 LG2 - 350 duplex 40 600 Deliverable within 2 to 6 days. Foot valves Filter undesirable Locking device particles and keep the ▲ Operation The stroke adjustment pump primed when 30 400 The Lagoa pump is composed of a membrane mechanism can be locked in stopped. LG2 - 350 connected to a piston of which the alternating position to ensure that stroke Diaphragm movement successively fills and empties the length remains at its set point. 20 200 ▲ Preformed type, made of PTFE reinforced Injection rod pumphead. with elastomer. The liquid contact part is Enables your product LG1 - 20 1 The backward movement of the membrane in chemically inert PTFE. LG2 - 140 to be injected in a vein opens the bottom check valve and allows the 10 100 entry of fluid, which fills the pumphead. without polluting the injection pipework LG2 - 50 2 The forward movement of the membrane closes LG1 - 4 (non-return function). LG2 - 20 the bottom check valve, opens the top check Pressure (P) in bar Pressure (P) in bar 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 valve and expels the dose. Safety and retention valves Prevent excess flow and Overall Dimensions Connections pressures, siphoning L l A B C Pumphead type Model Pumphead size and underloading. mm mm mm mm mm U H S SA Casing LG1 - 4 294 160 65.5 58.5 136 4 4x8 flexible hose 1 - Suction phase ▲ Robust cast aluminium LG1 - 20 302 160 65.5 58.5 168 or 10-16 PVC pipe 1/2" DIN DN10 Pulsation dampers 302 160 65.5 58.5 168 20 6x12 flexible hose G male male alloy construction. LG1 - 50 To render your flow 50 or 10-16 PVC pipe 1" G male LG2 - 20 375 210 114.5 58.5 168 140 linear and lessen LG2 - 50 375 210 114.5 58.5 168 350 1" G male 3/4" SMS 25 male fluid hammer effects. LG2 - 140 429 223 159 59 246 G female 350 duplex — LG2 - 350 429 223 159 59 246 LG2 - 350 duplex 429 389 159 59 246 Stroke adjustment "Ready-to-meter" ▲ The capacity is set by turning the micrometer assemblies dial which is fitted with vernier scale graduated You connect the assembly 165 in percentage stroke length. to the pump and you are Electric servo control can be fitted (1). ready to start ! Possibility of multiplexing for: 321 299 321 = 2 - Discharge phase = - performing proportional metering with different C C fluids (a resin and a hardener, for example) 75 Dosunits (1) = 75 = - obtaining a greater flow than with one single Complete metering 4 4 8 fixation A 148 B 139 pumphead units on a 120 to 1000 l fixation A 172 B fixation 139 139 26 139 L holes 160 holes holes Ø6mm L - phasing the pump stroke to prevent pulsations capacity HDPE tank. Ø6mm Ø6mm and thereby achieving linear flow. (1) Please contact us Lagoa LG1 Lagoa LG2 Lagoa LG2 Duplex
- 4. P C M Po m p e s The Lagoa series is designed for metering a wide variety Lagoa Series Diaphragm dosing pumps Simple, reliable, deliverable Lagoa series: of products in chemical engineering, environmental Understanding model designation within 2 to 6 days S i m p l i c i t y, r e l i a b i l i t y Drive a n d av a i l a b i l i t y applications as well as the food and personal care industries ▲ The pump is driven by a direct mounted light alloy Pumphead type motor with IP55 protection. The bearings are greased LG1 U 50 T U Polypro for life, making the motors maintenance-free. H PVC Advantages ▲ S Stainless steel Hydraulics size Pumphead type Nominal flow Drive unit type SA Stainless steel with food connections Of electro-mechanical drive • Reduced mechanical and hydraulic shocks • Silent • Does not cause and is not affected Pumphead Applicable directives and standards Performances by interference ▲ The pumphead is easy to remove and change. Flow at 1 bar - 50Hz Flow at Pmax - 50Hz Pressure Rate Power (1) Model Pumpheads 10 % 100 % 10 % 100 % max** 50Hz Mono (M) Three (T) Of the design • Simple and robust construction It consists of: - 1 suction check valve FDA l/h l/h l/h l/h bar strokes/min W W LG1 - 4 1 4 0 3,3 12 48 60*** 60 • Reliability of metering - 1 discharge check valve LG1 - 20 3 18,5 1 15 10 48 60*** 60 • Adaptable: meters a wide range of fluids - 1 liquid end body The pumps in the Lagoa series meet the LG1 - 50 10 47 2 42 5 120 60*** 60 • Simplified maintenance machine directive requirements and its Pumpheads are available in many material LG2 - 20 U, H, S, SA 6 20 0,5 16 10 48 - 120 harmonized standards. • Dry running combinations as shown in the table on the LG2 - 50 12 51 2 45 10 120 - 250 next page. • • • • • • • • • • • LG2 - 140 25 145 10 127 7.5 48 - 120 LG2 - 350 70 350 40 330 5 120 - 250 Technical data Note: other versions are available on request. LG2 - 350 duplex * U, H, S 140 700 80 660 5 120 - 250 • Maximum flow: 350l/hr per pumphead * asynchronous pumpheads - ** maximum pressures are stated at 20°C - *** available with the U pumphead only. • Adjustable from 10 to 100% Accessories • Maximum pressure: 12 bar Flow rate (Q) Curves Q / P Flow rate (Q) Curves Q / P • Maximum temperature: 100°C PCM offers you a comprehensive range in l/h in l/h • Speed: 48 and 120 strokes/min of solutions to enable you to achieve high-performance metering regardless of 50 800 • Precision: ± 1% • Linearity: ± 3% the working conditions of your installation. LG1 - 50 LG2 - 350 duplex 40 600 Deliverable within 2 to 6 days. Foot valves Filter undesirable Locking device particles and keep the ▲ Operation The stroke adjustment pump primed when 30 400 The Lagoa pump is composed of a membrane mechanism can be locked in stopped. LG2 - 350 connected to a piston of which the alternating position to ensure that stroke Diaphragm movement successively fills and empties the length remains at its set point. 20 200 ▲ Preformed type, made of PTFE reinforced Injection rod pumphead. with elastomer. The liquid contact part is Enables your product LG1 - 20 1 The backward movement of the membrane in chemically inert PTFE. LG2 - 140 to be injected in a vein opens the bottom check valve and allows the 10 100 entry of fluid, which fills the pumphead. without polluting the injection pipework LG2 - 50 2 The forward movement of the membrane closes LG1 - 4 (non-return function). LG2 - 20 the bottom check valve, opens the top check Pressure (P) in bar Pressure (P) in bar 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 valve and expels the dose. Safety and retention valves Prevent excess flow and Overall Dimensions Connections pressures, siphoning L l A B C Pumphead type Model Pumphead size and underloading. mm mm mm mm mm U H S SA Casing LG1 - 4 294 160 65.5 58.5 136 4 4x8 flexible hose 1 - Suction phase ▲ Robust cast aluminium LG1 - 20 302 160 65.5 58.5 168 or 10-16 PVC pipe 1/2" DIN DN10 Pulsation dampers 302 160 65.5 58.5 168 20 6x12 flexible hose G male male alloy construction. LG1 - 50 To render your flow 50 or 10-16 PVC pipe 1" G male LG2 - 20 375 210 114.5 58.5 168 140 linear and lessen LG2 - 50 375 210 114.5 58.5 168 350 1" G male 3/4" SMS 25 male fluid hammer effects. LG2 - 140 429 223 159 59 246 G female 350 duplex — LG2 - 350 429 223 159 59 246 LG2 - 350 duplex 429 389 159 59 246 Stroke adjustment "Ready-to-meter" ▲ The capacity is set by turning the micrometer assemblies dial which is fitted with vernier scale graduated You connect the assembly 165 in percentage stroke length. to the pump and you are Electric servo control can be fitted (1). ready to start ! Possibility of multiplexing for: 321 299 321 = 2 - Discharge phase = - performing proportional metering with different C C fluids (a resin and a hardener, for example) 75 Dosunits (1) = 75 = - obtaining a greater flow than with one single Complete metering 4 4 8 fixation A 148 B 139 pumphead units on a 120 to 1000 l fixation A 172 B fixation 139 139 26 139 L holes 160 holes holes Ø6mm L - phasing the pump stroke to prevent pulsations capacity HDPE tank. Ø6mm Ø6mm and thereby achieving linear flow. (1) Please contact us Lagoa LG1 Lagoa LG2 Lagoa LG2 Duplex
- 5. Lagoa Series Diaphragm dosing pumps PCM PRECI POMPE Simple, reliable, deliverable Applications within 2 to 6 days Food • Metering of alkaline and/or acid products and disinfecting solutions Lagoa Series into installed cleaning systems (CIP) • Metering of fermentation products and renet in the dairy industry Diaphragm dosing pumps • Metering of anti-foaming products • Metering of flavoring, coloring agents and yeasts Simple, reliable, deliverable within 2 to 6 days • Metering of citric acid and ascorbic acid • Metering of sugar syrup • Metering of arabic gum, sulfur anhydride, casein and gelatine as additives in wine-production • Metering of diatomaceous earth (filtration of brine baths) • Metering of liquid fertilizer Pump on filtering pallet (wine production) Industry • Surface treatment: Designed & realised by www.altavox.biz - E-TD0053LAG 05-05 — PCM reserves the right to change this data at all times. This document was printed with toxic-free ink. - Metering of degreasing agents and surfagents for surface preparation - Metering of hydrochloric acid and inhibitor - Additions of chromic acid for electrophoresis - Additions of sulfuric acide or phosphoric acid to top-up bath levels - Metering of wetting agent for coil coating • Foundries: proportional metering of resin and catalyzer in the production of sand moulds • Paper-making: metering of coloring agents and anti-foaming agents • Textiles: metering of coloring agents • Cement: metering of wetting agent, waterproofing agent and water-reducing plasticizer in the production of plasterboard • Tile production: metering of coloring paste • Timber: metering of fungicide Metering of soda and acid Environment • Metering of coagulants: polymer of viscosity lower than 1500cP (polyacrylamides). Injection of diluted polymer into concentrated ludges can decrease pressure losses and thereby contribute to HEAD OFFICE reducing operating costs • Metering of coagulants such as ferric chloride, ferric sulfate, ferrous UNITED STATES FRANCE CHINA sulfate, alumina sulfate, aluminum chloride (WAC, PAC) Tel: +1 713 896 4888 PCM S.A. Tel: +86 (0)21 62362521 • Metering of anti-foaming products Fax: +1 713 896 4806 17 rue Ernest Laval - BP 35 Fax: +86 (0)21 62362428 92173 VANVES Cedex • Metering of alkaline and acidic products: hydrochloric acid, phosphoric pcmdelasco@pcmdelasco.com pcmchina@pcm.eu FRANCE acid, nitric acid and soda www.pcmdelasco.com www.pcm.eu Tél : +33 (0)1 41 08 15 15 • Metering of biocides and disinfectants for preventing the develop- Fax : +33 (0)1 41 08 15 00 ment of bacteria (sodium or calcium hypochlorite, or chorine bioxide) contact@pcm.eu • Metering of hydrazine (elimination of oxygen dissolved in boiler water) www.pcm.eu • Metering of sodium carbonate for re-establishing the calcium/carbon balance in water • Metering of methanol (atex), phosphoric acid and urea as nutrients. UNITED KINGDOM GERMANY TUNISIA THAILAND RUSSIA Tel: +44 (0)1536 740200 Tel: +49 (0)611 60977-0 Tel: +216 71 238 138 Tel: +66 (0)34 246 012 Tel: +7(812)320 70 96 Fax: +44 (0)1536 740201 Fax: +49 (0)611 60977-20 Fax: +216 71 231 713 Fax: +66 (0)34 297 022 Fax: +7(812)320 75 12 sales@pcmpumps.co.uk info@delasco.de pcmtunisie@pcm.eu mwitayat@pcm.eu pcmrussia@pcm.eu www.pcmpumps.co.uk www.delasco.de www.pcm.eu www.pcm.eu www.pcm.eu Ferric chloride pumping in purification station
- 6. Lagoa Series Diaphragm dosing pumps PCM PRECI POMPE Simple, reliable, deliverable Applications within 2 to 6 days Food • Metering of alkaline and/or acid products and disinfecting solutions Lagoa Series into installed cleaning systems (CIP) • Metering of fermentation products and renet in the dairy industry Diaphragm dosing pumps • Metering of anti-foaming products • Metering of flavoring, coloring agents and yeasts Simple, reliable, deliverable within 2 to 6 days • Metering of citric acid and ascorbic acid • Metering of sugar syrup • Metering of arabic gum, sulfur anhydride, casein and gelatine as additives in wine-production • Metering of diatomaceous earth (filtration of brine baths) • Metering of liquid fertilizer Pump on filtering pallet (wine production) Industry • Surface treatment: Designed & realised by www.altavox.biz - E-TD0053LAG 05-05 — PCM reserves the right to change this data at all times. This document was printed with toxic-free ink. - Metering of degreasing agents and surfagents for surface preparation - Metering of hydrochloric acid and inhibitor - Additions of chromic acid for electrophoresis - Additions of sulfuric acide or phosphoric acid to top-up bath levels - Metering of wetting agent for coil coating • Foundries: proportional metering of resin and catalyzer in the production of sand moulds • Paper-making: metering of coloring agents and anti-foaming agents • Textiles: metering of coloring agents • Cement: metering of wetting agent, waterproofing agent and water-reducing plasticizer in the production of plasterboard • Tile production: metering of coloring paste • Timber: metering of fungicide Metering of soda and acid Environment • Metering of coagulants: polymer of viscosity lower than 1500cP (polyacrylamides). Injection of diluted polymer into concentrated ludges can decrease pressure losses and thereby contribute to HEAD OFFICE reducing operating costs • Metering of coagulants such as ferric chloride, ferric sulfate, ferrous UNITED STATES FRANCE CHINA sulfate, alumina sulfate, aluminum chloride (WAC, PAC) Tel: +1 713 896 4888 PCM S.A. Tel: +86 (0)21 62362521 • Metering of anti-foaming products Fax: +1 713 896 4806 17 rue Ernest Laval - BP 35 Fax: +86 (0)21 62362428 92173 VANVES Cedex • Metering of alkaline and acidic products: hydrochloric acid, phosphoric pcmdelasco@pcmdelasco.com pcmchina@pcm.eu FRANCE acid, nitric acid and soda www.pcmdelasco.com www.pcm.eu Tél : +33 (0)1 41 08 15 15 • Metering of biocides and disinfectants for preventing the develop- Fax : +33 (0)1 41 08 15 00 ment of bacteria (sodium or calcium hypochlorite, or chorine bioxide) contact@pcm.eu • Metering of hydrazine (elimination of oxygen dissolved in boiler water) www.pcm.eu • Metering of sodium carbonate for re-establishing the calcium/carbon balance in water • Metering of methanol (atex), phosphoric acid and urea as nutrients. UNITED KINGDOM GERMANY TUNISIA THAILAND RUSSIA Tel: +44 (0)1536 740200 Tel: +49 (0)611 60977-0 Tel: +216 71 238 138 Tel: +66 (0)34 246 012 Tel: +7(812)320 70 96 Fax: +44 (0)1536 740201 Fax: +49 (0)611 60977-20 Fax: +216 71 231 713 Fax: +66 (0)34 297 022 Fax: +7(812)320 75 12 sales@pcmpumps.co.uk info@delasco.de pcmtunisie@pcm.eu mwitayat@pcm.eu pcmrussia@pcm.eu www.pcmpumps.co.uk www.delasco.de www.pcm.eu www.pcm.eu www.pcm.eu Ferric chloride pumping in purification station