Lattices.ppt
- 1. Chem 59-553 Lattices By definition, crystals are periodic in three dimensions and the X-ray diffraction experiment must be understood in the context of the crystal lattice and the space group. A lattice is a regular infinite arrangement of points in which every point has the same environment as any other point. A lattice in 2 dimensions is called a net and a regular stacking of nets gives us a 3-dimensional lattice. 2-D net Stacks of 2-D nets produce 3-D lattices.
- 2. Chem 59-553 Lattices The lattice can be considered as a kind of scaffold upon which the structure of the crystal is built. For a crystal, the lattice is a 3-dimensional array and the structural motif will be located in a hypothetical box called the unit cell.
- 3. Chem 59-553 Lattices Since lattices consist of infinitely repeating patterns, one needs only to look at a the smallest repeat unit to describe the lattice. The smallest repeat unit that will generate the entire lattice (by translation) is called the Unit Cell. It is defined by three repeat distances (a, b, and c) and three angles (a, b, g), where a is the angle between b and c, b is the angle between a and c, and g is the angle between a and b. Unit cell parameters (a, b, c, a, b, g) are chosen to best represent the highest-possible symmetry of the crystal and are given right-handed axes (a is along x, b is along y and c is along z) with angles that are either all ≥ 90º or all ≤ 90º.
- 4. Chem 59-553 Unit Cells and Crystal Systems There are seven different classes of unit cells that, each defined by different limiting conditions on the unit cell parameters (a, b, c, a, b, g). The most general system is called “Triclinic” in which none of the distances and angles are restricted to have any particular value. Please note that the symbol “≠” means “is not necessarily equal to” i.e. they might have the same value but it is not a requirement of the crystal system. Triclinic a ≠ b ≠ c, a ≠ b ≠ g Monoclinic a ≠ b ≠ c, a = g = 90º ≠ b (by convention b is the unique axis)
- 5. Chem 59-553 Unit Cells and Crystal Systems Orthorhombic a ≠ b ≠ c, a = b = g = 90º Tetragonal a = b ≠ c, a = b = g = 90º (by definition c is the unique axis) As more of the angles and distances are restricted, the box becomes more symmetric.
- 6. Chem 59-553 Unit Cells and Crystal Systems Hexagonal or Trigonal a = b ≠ c, a = b = 90º g = 120º (by definition c is the unique axis) Rhombohedral a = b = c, a = b = g ≠ 90º Note that for the hexagonal or trigonal systems, three unit cells are necessary to see the symmetry of the system. The choice of trigonal or hexagonal is dependent on the contents of the cell (more on this later).
- 7. Chem 59-553 Cubic a = b = c, a = b = g = 90º Unit Cells and Crystal Systems The most symmetric boxes are cubic and have only one variable parameter.
- 8. Chem 59-553 Unit Cells and Crystal Systems A summary of the different crystal systems shows how the number of variables in the unit cell parameters decreases with increasing lattice symmetry. Crystal System # Parameters* Triclinic 6 a ≠ b ≠ c; a ≠ b ≠ g Monoclinic 4 a ≠ b ≠ c; a = g = 90 ° b ≥ 90 ° Orthorhombic 3 a ≠ b ≠ c; a = b = g = 90 ° Tetragonal 2 a = b ≠ c; a = b = g = 90 ° Trigonal hexagonal 2 a = b ≠ c; a = b = 90o g = 120 ° rhombohedral 2 a = b = c; a = b = g ≠ 90 ° Hexagonal 2 a = b ≠ c; a = b = 90 ° g = 120 ° Cubic 1 a = b = c; a = b = g = 90 °
- 9. Chem 59-553 Centering in Unit Cells Note that to best indicate the symmetry of the crystal lattice, it is sometimes necessary to choose a unit cell that contains more than one lattice point. Unit cells that contain only one lattice point are called “Primitive” and are indicated with a “P”. There are only a limited number of unique ways to choose centered cells and the number and composition of possible centered cells depend on the crystal system. Primitive unit cells Centered Remember that only 1/8th of an atom at the corner of the cell is actually in that cell. This CsCl lattice is primitive.
- 10. Chem 59-553 Centering in Unit Cells An example of useful cell centering is shown below for a monoclinic system. When we look down the unique b axis, a primitive cell would conform to the monoclinic system. Similarly, when we look down the a axis, we can see that the preferred 90º angle for a is apparent. View down b View down a
- 11. Chem 59-553 This is an example of a “face centered” cell because the additional lattice point lies in the center of one side of the cell. Centering in Unit Cells However, when we look down the c axis, the necessary 90º angle for g is not observed for a primitive cell, however a face centered unit cell does provide the 90º angle for g and better indicates the symmetry of the lattice. View down c Because the face that is centered is looking down the c axis, the lattice is designated with a “C” instead of a “P”.
- 12. Chem 59-553 Centering in Unit Cells For monoclinic cells, no other form of centering provides a different solution, however for other crystal systems different types of centering are possible. These include centering of specific faces (“A”, “B” or “C”), centering of all faces “F” or body centering “I”, in which there is a lattice point at the geometric center of the unit cell. Primitive, P Body-centered, I Face-centered, F All of the different possible lattices, including unique centering schemes were determined by A. Bravais and thus the 14 unique lattices are called “Bravais Lattices”
- 13. Chem 59-553 Bravais Lattices These 14 lattices are the unique scaffolds in which atoms or molecules may be arranged to form crystalline materials. However there is a further aspect of symmetry in crystals which must be considered to describe the actual arrangement of atoms in a crystal. These are the various crystallogaphic Point Groups.
- 14. Chem 59-553 Point Groups Symmetry elements are geometric entities about which a symmetry operation can be performed. In a point group, all symmetry elements must pass through the center of mass (the point). A symmetry operation is the action that produces an object identical to the initial object. Point groups have symmetry about a single point at the center of mass of the system. The symmetry elements and related operations that we find in discrete objects (such as molecules) are: Element Schoenflies Hermann- Mauguin Operation Rotation axis Cn n n-fold rotation (360º/n) Identity E 1 nothing Plane of symmetry m Reflection Center of symmetry i -1 or 1 Inversion Improper rotation axis Sn - n-fold rotation + reflection Rotary Inversion axis - -n or “n bar” n-fold rotation + inversion
- 15. Chem 59-553 Point Groups Whereas there is an infinite number of point groups available for discrete molecules and objects, the only point groups that can combine with lattices are those that conform to the periodicity of the lattice. This means that the result of a rotation of a lattice point must coincide with another lattice point. The only such rotations are 1, 2, 3, 4, and 6. There are a total of 32 point groups that conform to this rule (the “crystallographic point groups”) and the combination of crystallographically acceptable point groups with the 14 Bravais lattices gives rise to space groups. Crystal System Point groups Laue Class Patterson Symmetry Triclinc 1, -1 -1 P-1 Monoclinic 2, m, 2/m 2/m P2/m, C2/m Orthorhombic 222, mm2 , mmm mmm Pmmm, Cmmm, Fmmm, Immm Tetragonal 4, -4, 4/m, 422, 4mm, -42m, 4/mmm 4/m, 4/mmm P4/m, I4/m, P4/mmm, I4/mmm Trigonal 3, -3, 32, 3m, -3 m -3, -3m P-3, R-3, P-3m1, P-31m, R-3m Hexagonal 6, -6, 6/m, 622, 6mm, -62m, 6/mmm 6/m, 6/mmm P6/m, P6/mmm Cubic 23, m-3, 432, -43m, m3m m3, m3m Pm-3, Im-3, F-3m, Pm-3m, Fm-3m, Im-3m
- 16. Chem 59-553 Crystallographic Point Groups Stereographic projections of point group symmetry (“+” is in the northern hemisphere and “o” is in the southern hemisphere)
- 17. Chem 59-553 Triclinic Systems Point group: 1 xyz y x z z xyz is a general position in fractional coordinates. This means that x is a number between 0 and 1 that describes the distance in the a direction. Similarly, y is the fraction of the b distance and z is a fraction of the c distance. Because of the periodicity of the lattice, an object found at x = 1.3 means that there must be an identical object in the origin unit cell at x = 0.3. This is the most convenient way to represent coordinates in a lattice. Note: to determine the actual distance in a given direction, all one must do is multiply the fractional coordinate by the corresponding cell parameter (xa = distance in the a direction from the bc plane using the unit cell axes, but remember that these are not Cartesian axes.)
- 18. Chem 59-553 Point group: -1 xyz, -x-y-z 1 2 2’ origin y x Triclinic Systems xyz is a general position in fractional coordinates, the addition of point group symmetry creates equivalent positions that must also be found in the unit cell.
- 19. Chem 59-553 Point group: 2 xyz, -xy-z 1 2 2’ Monoclinic Systems
- 20. Chem 59-553 Point group: m xyz, x-yz 1 2 2’ 1 2 2’ Point group: 2/m xyz, -xy-z, x-yz, -x-y-z 4 3 3’ 4’ Monoclinic Systems
- 21. Chem 59-553 1 2 Point group: mm2 xyz, -x-yz, x-yz, -xyz 4 3 Orthorhombic Systems
- 22. Chem 59-553 Orthorhombic Systems 1 4 Point group: 222 xyz, x-y-z, -xy-z, -x-yz 3 2
- 23. Chem 59-553 1 Point group: mmm xyz, xy-z, -x-y-z, x-yz -xy-z, -xyz, -x-yz, -x-y-z 2 3 6 8 7 5 2’ 4’ 3’ 6’ 5’ 8’ 7’ Orthorhombic Systems
- 24. Chem 59-553 Translational Symmetry in Crystals There are two further types of symmetry elements/operations that must be taken into consideration when combining point groups and lattices. Both of these operations involve a translational component in addition to either a rotation or a reflection. The symmetry elements are called “screw axes” and “glide planes”.
- 25. Chem 59-553 Screw Axis this symmetry element is given by the symbol np where n is the nature of the rotation and the translation is p/n of the cell edge. Thus a two-fold screw axis along b denoted 21 take a point xyz to -x, 1/2+y,-z. Remember that positive rotations are counter-clockwise. one unit cell length Note: a 32 axis is the mirror image of a 31 axis
- 26. Chem 59-553 Glide Plane this symmetry element is given by the symbol a,b,c,n,or d where this represents the reflection in a mirror plane and translation of 1/2 the cell edge. The n glide is usually along the diagonal (1/2(a+b)) and the d glide is often along the body diagonal (1/4(a+b+c)). a c b An example of an “a” glide plane
- 27. Chem 59-553 From the preceding treatment, it is apparent that parts of most unit cells are related by symmetry to other parts of the cell. Thus the smallest repeat unit that can be used to construct the entire crystal structure (using both symmetry and translation) is called the asymmetric unit (or motif). The asymmetric unit can be a single atom, a fraction of a molecule, a molecule, several molecules etc. Determination of the contents of the asymmetric unit thus allows us to reconstruct the crystal structure. Asymmetric Unit The Asymmetric Unit Unit cell contents
- 28. Chem 59-553 Space Groups The combination of all the possible crystallographically acceptable point groups with the 14 Bravais lattices (when translational symmetry is also taken into account) provides the 230 space groups. Space groups are typically named using the lattice designation followed by the point group designation (in which mirror planes may be replaced with glide planes and rotation axes may be replaced with screw axes). Common examples include: P-1, P1, P212121, Pnma, C2c, P21/c, Ibca, Fm3m, R-3 To find out any information you might want about space groups, you should consult the “International Tables for Crystallography, Volume A, Space Group Symmetry," 1996, Kluwer Academic Publishers. This is generally found in the room adjacent to the diffractometers. Much of the important information can also be found in software applications such as Diamond or WinGX.
- 29. Chem 59-553 Space Group Information Usual Name Crystal System Full Name General positions (diagram including handedness) Location and type of symmetry elements General positions (coordinates) Special positions (coordinates) Limiting conditions for observed reflections (this tells us what types of reflections we can see from this space group – more on this later). Plane groups of special projections
- 30. Chem 59-553 P21/c and Symmetry Operators xyz -x, 1/2+y, -z 21 c glide x, -y, 1/2+z -x, 1/2-y, 1/2-z 21 xyz -x,1/2+y,-z x,-y,1/2+z -x,1/2-y,1/2-z x,1/4+y,1/4+z -x,3/4+y,1/4-z x,1/4-y,3/4+z -x,3/4-y,3/4-z shift origin to 0,1/4,1/4 This is an example of how the equivalent positions are determined for the monoclinic space group P21/c. Similar treatments can be used to deduce the equivalent positions for any other space group.
- 31. Chem 59-553 x,1/4+y,1/4+z -x,3/4+y,1/4-z x,1/4-y,3/4+z -x,3/4-y,3/4-z x,1/4+y,1/4+z -x,-1/4+y,1/4-z x,1/4-y,-1/4+z -x,-1/4-y,-1/4-z subtract 1 from 3/4 thus substitute x =X; 1/4+y = Y; 1/4+z = Z XYZ -X,1/2+Y,1/2-Z X,1/2-Y,1/2+Z -X,-Y,-Z These are the general equivalent positions in the International Tables. These positions highlight the presence of the center of symmetry and make it the origin of the cell and are thus the most appropriate. Note: the position remains equivalent because these are fractional coordinates. The pairs are related by an inversion center. -1 or 1