LCD Multifunction Power Analyzer with Data Logger
0 likes443 views
The MPM8000 is a powerful multifunction power meter that can measure and analyze real-time electrical data like voltage, current, power, power factor, frequency, energy consumption and harmonics. It has functions like RS-485 communication, energy pulse outputs, data logging, and can be expanded through optional input/output modules. The meter is suitable for monitoring electrical systems and transmitting measurement data.
LCD Multifunction Power Analyzer with Data Logger
- 1. Shenzhen Huayansheng Electron Co.,Ltd Description MPM8000 is a powerful multifunction power meter with modular design, which can be applied for monitoring and controlling of the electrical system. MPM8000 can measure and analyze real time data, such as U, I, P, Q, S, COSΦ, F, 8000 kWh, kVAr, etc. MPM8000 has the following functions: PM RS-485 communication port, 2 energy pulse output (include ter M active energy and reactive energy), Max/min data record, Me and SOE event record. MPM8000 can extend functions by wer choosing the external optional modules: harmonic analysis, n Po 8 remote signals on/off mode, programmable 4 analog ctio outputs (0~5V or 4~20mA optional), data storage, Profibus tifun Com. protocol, Ethernet communication functions. The ul multi-tariff function allows the user to measure energy in Many interval (the min. interval is 30min.), which can read the Technical Data sum, sharp, peak, valley, flat energy data in 30 days, and measure 2nd to 63rd harmonics in statistics. Input Current All our instruments fulfill all important requirements Input Current: 5A (Current value can be set up) and regulations concerning electromagnetic compatibility Measurement scope: 0.5%~120% and safety isolation (IEC61000, IEC1010 standard and Overload capacity: 2 X rated continuously, 100A/1s non EN61010 standard). The devices have been developed, continuously manufactured and tested in accordance with Quality Power consumption: ≤0.2VA per phase Assurance System ISO 9001. Voltage Input Input Voltage: 400VAC (L-N), 693VAC (L-L) (Voltage Measured Scope value can be set up) System frequency: 45~65Hz The meter MPM8000 can be applied in single phase, 3-Ph s.com Measurement scope: 3%~120% 3Wire, 3-Ph 4Wire system. It can be applied vastly in the Overload Capacity: 2 X rated continuous, 2500V/1s non zhye field of secondary measurement in high Voltage, low continuous w.s Voltage system, or transmission of measured data. w Power consumption: ≤0.5VA per phase Parameter setup w Pulse output No. of outputs 2 channels (active/reactive energy The programmable parameters are: com. address, PT, CT, baud rte, clock, demand cycle, user password, multi-tariff each) rate, etc. The user can set up relay output, analog output on Serial com. port PC. NO. of outputs 1 RS-485 port The parameters setup on meter and PC: com. address, PT, Communication protocol Modbus-RTU protocol CT, baud rate, time, demand statistics, no. of remote signal, 2400/4800/9600/1920 Baud rate user password, multi-tariff, IO module detection, Ethernet 0/38400bps setup. www.szhyes.com Email: export008@szhyes.com Tel: 86-755-33581652
- 2. Shenzhen Huayansheng Electron Co.,Ltd Technical Data EMC and Safety Standard Other parameters IEC61000-4-2 (GB/T17626.2) Auxiliary Power 85~265VAC/DC IEC61000-4-8 (GB/T17626.8) LCD Display IEC61000-4-4 (GB/T17626.4) Display module IEC61010-1 (GB/T4793.1) 76mmx66mm 8000 Storage Capacity 2GB Terminal Chart Temp. drifting factor <100PPM/℃ PM ter M Withstand Voltage 2500V/1 min Me Total power consumption <8VA wer Operation temperature -20℃~60℃ n Po Storage temperature -40℃~85℃ ctio Operation humidity 5~95％ RH tifun Pollution Class Class 2 ul Flammability acc. to M Material of Housing UL94V0 Size 96x99x78mm Technical Data Parameters Display Accuracy Voltage 0~9999.9kV Class 0.2 scope:5%~100%V Class 0.2 scope: 5%~100%A Current 0~9999.9kA Zero sequence current Class 0.5 s.com Power factor -1~＋1 Class 1 w.s zhye Frequency 45~65Hz ±0.01Hz Terminal 1, 2, 3, 4 are Voltage In, marked as L1, L2, ww Active Power -9999~9999MW Class 0.5 L3, N. Reactive Power -9999~9999MVAr Class 0.5 Terminal 5, 6 , 7, 8, 9, 10are Current In, marked as Apparent Power 0~9999MVA Class 0.5 I1*，I1， I2*, I2, I3*, I3. Active Demand -9999~9999MW Class 1.0 Terminal 11, 12, 13 as auxiliary power input, 12 as L Reactive Demand -9999~9999MVAr Class 1.0 end, 11 as N end, 13 as ground line. It is Active Energy 0~9999999.99Mwh Class 1.0 recommended to connect the ground line. Reactive Energy 0~9999999.99MVArh Class 2.0 Terminal 15, 16 are RS 485 com. 15 as A+, 16 as B-. Phase Angle 0.0°~359.9° Class 2.0 Terminal 17, 18,19 are a pair of active and reactive Current 0~100% Class 2.0 energy pulse output, 17 as active positive end, 18 as total harmonic % reactive positive end, and 12 as COM negative end. Voltage total 0~100% Class 2.0 Terminal 14,20, 21,22,23,24 are standby ends. harmonic % www.szhyes.com Email: export008@szhyes.com Tel: 86-755-33581652
- 3. Shenzhen Huayansheng Electron Co.,Ltd Function Description Real time measurement Phase Voltage Phase Voltage, average phase Voltage Line Voltage Line Voltage, average line Voltage Phase Current, average phase Current, zero sequence Current Current 8000 Active Power Phase active power, 3 phase active total power PM Reactive Power Phase reactive power, 3 phase reactive total power ter M Apparent Power Phase apparent power, 3 phase apparent total power Me Power 4 quadrant Power 4 quadrant Po wer Frequency System frequency Main ction Power Factor Phase power factor, 3 phase total power factor unit fun 3 phase active/reactive demand power, demand apparent ulti Demand statistic Demand power M Energy Reading Active energy Imported, exported and net active energy, 1 channel active energy pulse output Imported, exported and net reactive energy, 1 channel Reactive energy reactive energy pulse output Multi tariff billing Multi tariff setup Time display Real time display Year/month/day/hour/minute/second RS-485 Data communication 1 Modbus-RTU protocol communication Installation 1. Exterior size: 91 mm×91 mm×72mm s.com 2. Installation size: 91 mm×91mm w.s zhye Supporting comp. ww Hole Buckle up position. During the installation, please insert the meter in the hole of the cabinet, then push and buckle up the meter with the installation accessories. It is strongly recommended there should be 20mm space around the surface of the meter for ventilation purpose. www.szhyes.com Email: export008@szhyes.com Tel: 86-755-33581652
- 4. Shenzhen Huayansheng Electron Co.,Ltd Shenzhen Huayansheng Electron Co.,Ltd www.szhyes.com Email: export008@szhyes.com Tel: 86-755-33581652
- 5. Shenzhen Huayansheng Electron Co.,Ltd Auxiliary module's function and usage 8 remote signals input module: This module has 8 Programmable 4 relay outputs module: This module has 4 sourcefree remote signals input channels, each channel can separate electric relay output channels, which can be setted up be setted up separately to check the outside on-off status. separately to corresponding different electricity parameter’s Detail setup can be finished through the key on the meter automatic model and manual model which can be operated by and upper computer. The function of upper read upper computer. Associated automatic alarm function can trigger 8000 SOE(Sequence of events) by connecting the SOE interface event to record the present power system status; without alarm, PM which record accurately the status and detail time of events. the 4 electric relay will normally keep open. Programmable 4 analog outputs module: This module Me ter M SD card data storage module: Adopted advanced high-capacity wer has 4 analog output, voltage or current model optional. internal storage SD card to store electrical measurement n Po Output adopts 4 channels same negative terminal format, parameter at real time; and store the data for a given period of ctio each channel corresponding separately to different time. The data can be educed and analysed by upper computer, tifun electricity parameter. Current is: (4--20) mA output, voltage internal storage of SD card is optional. M ul is: (0--5) V output. Harmonic analysis module: It can display each measured Data storage and harmonic analysis module: This module information of the harmonic, and feedback the electric combined SD card data storage and harmonic analysis function, harmonic parameter, including (2~63 times) harmonic which can store electrical measurement data and harmonic content; phase angle etc. measured information. measurement data, including analysis and display (2~63times) harmonic content; phase angle etc. measured information. Ethernet communication module: It can connect to Profibus communication module: The meter can Network Ethernet by RJ45, and read electrical measurement by through Profibus communication Protocol terminal, fully remote access. Adopted 10M and 100M self-adaption complied with Profibus-DP Communication Protocol. model. (Default IP address is:192.168.0.250; Local port 27011) zhye s.com Note: A max. of 4 modules can be applied to 1 main unit, and the same type of modules can’t be selected together. C and V w.s can’t be selected at the same time; B can’t be selected with M or H. ww www.szhyes.com Email: export008@szhyes.com Tel: 86-755-33581652
- 6. Shenzhen Huayansheng Electron Co.,Ltd Typical Wiring Diagram PM 8000 Me ter M n Po wer tifun ctio Mul zhye s.com ww w.s www.szhyes.com Email: export008@szhyes.com Tel: 86-755-33581652