Lintech 110series specsheet
0 likes183 views
This document provides ordering and specification information for Electromate's 110 Series screw drive system. It includes details on carriage and screw options, motor mounts, couplings, switches and brakes. Tables range from 11x401-WC1 to 11x445-WC1 in various sizes up to 64.25 inches in travel length. The system provides precision linear motion with capabilities of handling various loads up to 4,720 lbs.
![Technical Reference - Screw Drive - 110-WC1 Series
Travel
Length
Table Dimensions
Model
Number lbs
inches
(mm)
1.250
(31,7) 8 13.25
(337) 4.000 1
(100)
0.250
(6,3) 12 15.25
(387) 5.500 3
(139)
0.250
(6,3) 16 19.25
(489) 8.500 5
(215)
1.250
(31,7) 16 23.25
(591) 11.500 5
(292)
0.750
(19,0) 20 27.25
(692) 14.375 7
(365)
0.250
(6,3) 24 31.25
(794) 17.375 9
(441)
0.750
(19,0) 28 37.25
(946) 22.000 11
(558)
1.250
(31,7) 32 43.25
(1099) 28.000 13
(711)
1.750
(44,4) 36 49.25
(1251) 31.750 15
(806)
2.250
(57,1) 40 55.25
(1403) 36.375 17
(923)
0.250
(6,3) 48 61.25
(1556) 40.750 21
(1035)
0.750
(19,0) 52 67.25
(1708) 45.500 23
(1155)
Footnotes:
Sold & Serviced By:
Specifications subject to change without notice
(kg)
inches
(mm)
C
inches
(mm)
Mounting Dimensions
A
11x401-WC1
6.250
6.3
(158,7)
(2,9) B
9.875
(250,8)
0.500
(12,7)
E M
8
Screw
Length
inches
(mm)
9.25
(235)
Table
Weight
x = 2; Carriage has 2 bearings; Carriage weight = 1.8 lbs. (0,82 kg)
x = 4; Carriage has 4 bearings; Carriage weight = 2.0 lbs. (0,91 kg)
(1)
1
11x402-WC1 8.250
11.875
0.250
1
8 11.25
7.3
(203,2)
(301,6)
(6,3) (286) (3,3) 1.000
(25)
2.500
(63)
11x404-WC1 10.250
13.875
8.2
(260,3)
(352,4)
(3,7) Dimensions & Specifications
11x405-WC1 12.250
15.875
9.2
(311,1)
(403,2)
(4,2) 11x408-WC1 16.250
19.875
11.1
(412,7)
(504,8)
(5,0) 11x411-WC1 20.250
23.875
13.0
(514,3)
(606,4)
(5,9) 11x414-WC1 24.250
27.875
14.9
(615,9)
(708,0)
(6,8) 11x417-WC1 28.250
31.875
16.9
(717,5)
(809,6)
(7,7) 11x422-WC1 34.250
37.875
19.8
(869,9)
(962,0)
(9,0) 11x428-WC1 40.250
43.875
22.6
(1022,3)
(1114,4)
(10,2) 11x431-WC1 46.250
49.875
25.5
(1174,7)
(1266,8)
(11,6) 11x436-WC1 52.250
55.875
28.4
(1327,1)
(1419,2)
(12,9) 11x440-WC1 58.250
61.875
31.3
(1479,5)
(1571,6)
(14,2) 11x445-WC1 64.250
67.875
34.1
(1631,9)
(1724,0)
(15,5) - With Waycovers -
D
1.250
(31,7)
2.500
(63,5)
2.500
(63,5)
2.000
(50,8)
1.500
(38,1)
2.500
(63,5)
2.500
(63,5)
2.500
(63,5)
2.500
(63,5)
2.500
(63,5)
2.500
(63,5)
2.500
(63,5)
2.500
(63,5)
2.500
(63,5)
(1)
Weight shown is with a 0.625 inch (16 mm) diameter screw, a 2 bearing carriage [1.8 lbs (0,82 kg)], a NEMA 23 motor mount [0.34 lbs (0,16 kg)], and a
C100 style [0.09 lbs (0,04 kg)] coupling. When using a 0.500 inch diameter screw subtract 0.022 lbs per inch (0,00039 kg per mm) of screw length for a
given model number. When using a 4 bearing carriage add 0.2 lbs (0,09 kg) to each value.
version: 01/2014
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com](https://image.slidesharecdn.com/lintech110seriesspecsheet-141018112416-conversion-gate02/85/Lintech-110series-specsheet-3-320.jpg)
Lintech 110series specsheet
- 1. Ordering Guide - Screw Drive - 110 Series 110 Series Ordering Guide 2 - 2 bearing per carriage 4 - 4 bearings per carriage 4 - 4 inches 01 - 1 to 45 inches WC1 - with waycovers Rolled ball screws S001 - S002 - .500 x .500 NPL .500 x .500 PL S004 - .500 x .500 PL(T) S007 - .625 x .200 NPL(T) S008 - .625 x .200 PL(T) other 11 4 4 01 - WC1 - 1 - - M02 - C145 - L01 - E00 - B00 Precision ball screws - .625 x .200 NPL - - - - - S114 S115 S116 S119 S999 - other M03 - NEMA 23 mount (M) Coupling Options (see pages C-40 to C-41) C000 - none C020 to C024 - C100 C040 to C047 - C125 EOT & home switches E00 - none E01 - rotary (500 lines/rev) Sold & Serviced By: Specifications subject to change without notice Prox (PNP) (T) - Turcite Nut Table Series Number of Bearings Carriage Length Travel Length (see page C-14) Waycovers Screw Options (see pages C-18 to C-23) .625 x .200 PL 16 x 5 NPL 16 x 5 PL 16 x 10 NPL 16 x 10 PL Limit & Home Switches (see pages C-37 to C-39) Encoder Options (see page C-49) Ground ball screws S213 - .625 x .500 PL Rolled acme screws S301 - M06 - NEMA 23 (RH) wrap M08 - NEMA 34 (RH) wrap C125 to C129 - H100 C145 to C154 - H131 E02 - rotary (1000 lines/rev) E03 - rotary (1270 lines/rev) Power-off Brakes (see page C-48) Prox (NPN) E10 - linear (2500 lines/inch) E99 - other B00 - none B01 - 24 VDC B02 - 90 VDC B99 - other C400 to C406 - G100 C999 - other C425 to C434 - G126 EOT switches only L00 - no switches home switch only Mechanical Reed Hall L01 L02 L03 L04 L05 L06 L07 L08 L09 L10 L11 L12 L99 - other E11 - linear (250 lines/mm) Carriage Inserts (see pages C-15) 1 - English mount 2 - Metric mount S003 - .500 x .500 NPL(T) - .625 x .200 PL - - 16 x 5 PL 16 x 16 PL .625 x .100 NPL .625 x .100 PL .625 x .200 NPL .625 x .200 PL - - 16 x 16 NPL 16 x 16 PL Motor Mount (see pages C-15, C-46 & C-47) M00 - none M01 - hand crank M02 - NEMA 23 mount (E) M04 - NEMA 34 mount (E) M07 - M09 - NEMA 23 (LH) wrap M99 - M05 - NEMA 34 mount (M) NEMA 34 (LH) wrap (E) - English Interface (LH) - Left Hand (M) - Metric Interface (NPL) - Non Preloaded (PL) - Preloaded (RH) - Right Hand S117 S118 S120 S121 S212 S214 S215 - - - S300 S302 S303 16 x 4 NPL 16 x 4 PL - - S304 S305 S114 L13 L14 L15 S005 - .625 x .200 NPL S006 - S009 - S010 - .625 x .200 PL .625 x 1.000 NPL .625 x 1.000 PL S011 - .625 x 1.000 NPL(T) S012 - .625 x 1.000 PL(T) ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 2. Technical Reference - Screw Drive - 110 Series Load Capacities Two (2) Bearing Carriage Four (4) Bearing Carriage 3,100 lbs 1,060 lbs 4,720 lbs 280 ft-lbs 95 ft-lbs 425 ft-lbs 240 ft-lbs 82 ft-lbs 365 ft-lbs 775 lbs 263 lbs ( 119 kg) 263 lbs ( 119 kg) lbs 665 lbs 772 in/sec2 N-m) ( 1406 ( 480 ( 2140 ( 379 ( 111 N-m) ( 535 kg) ( 19,6 m/sec2) d1 Center to center distance (spread) between the two rails 2.375 in ( 60,3 mm) 2.375 in ( 60,3 mm) .750 in ( 19,1 mm) Table Material Base, Carriage, End Plates, & Cover Plate option - 6061 anodized aluminum Linear Rail Material microns/25mm) microns/25mm) Specifications subject to change without notice Specifications Dynamic Horizontal 2 million inches (50 km) of travel Dynamic Horizontal 50 million inches (1270 km) of travel Static Horizontal Dynamic Roll Moment 2 million inches (50 km) of travel Dynamic Roll Moment 50 million inches (1270 km) of travel Static Roll Moment Dyn. Pitch & Yaw Moment 2 million inches (50 km) of travel Dyn. Pitch & Yaw Moment 50 million inches (1270 km) of travel Static Pitch & Yaw Moment Each Bearing Dyn. Capacity 2 million inches (50 km) of travel Each Bearing Dyn. Capacity 5 0 million inches (1270 km) of travel Each Bearing Static Load Capacity Thrust Force Capacity 10 million screw revolutions Thrust Force Capacity 500 million screw revolutions Maximum Acceleration d2 Center to center distance (spacing) of the bearings on a single rail dr Center distance of the bearing to top of carriage plate surface 1,550 lbs ( 703 kg) 525 lbs ( 238 kg) 2,360 lbs ( 1070 kg) 140 ft-lbs ( 190 N-m) 47 ( 64 ft-lbs N-m) 210 ft-lbs ( 285 N-m) 18 ft-lbs ( 24 N-m) 6 ft-lbs ( 8 N-m) 30 ft-lbs ( 41 N-m) 775 lbs ( 351 kg) 1,180 lbs ( 535 kg) 665 lbs ( 302 kg) 386 in/sec2 ( 9,8 m/sec2) Stainless Steel Acme Screw - Stainless Steel (< (< 3,30 3,30 Screw Material (see pages C-18 to C-23) Orthogonality (multi-axis systems) < 30 arc-seconds Waycover Material Hypilon Polyester Bellows firmly mounted to carriage & end plates kg) kg) kg) N-m) ( 576 N-m) ( 325 N-m) ( 495 N-m) ( 351 kg) ( 302 kg) 180 lbs ( 82 kg) 180 lbs ( 82 kg) .750 in ( 19,1 mm) ( 129 1,180 - 2.088 in ( 53,0 mm) For Two (2) & Four (4) Bearing Carriages Screw Material (see pages C-18 to C-23) Rolled Ball, Precision Ball, & Ground Ball - Case Hardened Steel Other Straightness <0.00013 in/in Flatness <0.00013 in/in Friction Coefficient < 0.01 Motor Mount NEMA 23 & 34 Mounts, Metric Mounts, Motor Wraps, and Hand Crank Option Coupling Three (3) different styles available Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 3. Technical Reference - Screw Drive - 110-WC1 Series Travel Length Table Dimensions Model Number lbs inches (mm) 1.250 (31,7) 8 13.25 (337) 4.000 1 (100) 0.250 (6,3) 12 15.25 (387) 5.500 3 (139) 0.250 (6,3) 16 19.25 (489) 8.500 5 (215) 1.250 (31,7) 16 23.25 (591) 11.500 5 (292) 0.750 (19,0) 20 27.25 (692) 14.375 7 (365) 0.250 (6,3) 24 31.25 (794) 17.375 9 (441) 0.750 (19,0) 28 37.25 (946) 22.000 11 (558) 1.250 (31,7) 32 43.25 (1099) 28.000 13 (711) 1.750 (44,4) 36 49.25 (1251) 31.750 15 (806) 2.250 (57,1) 40 55.25 (1403) 36.375 17 (923) 0.250 (6,3) 48 61.25 (1556) 40.750 21 (1035) 0.750 (19,0) 52 67.25 (1708) 45.500 23 (1155) Footnotes: Sold & Serviced By: Specifications subject to change without notice (kg) inches (mm) C inches (mm) Mounting Dimensions A 11x401-WC1 6.250 6.3 (158,7) (2,9) B 9.875 (250,8) 0.500 (12,7) E M 8 Screw Length inches (mm) 9.25 (235) Table Weight x = 2; Carriage has 2 bearings; Carriage weight = 1.8 lbs. (0,82 kg) x = 4; Carriage has 4 bearings; Carriage weight = 2.0 lbs. (0,91 kg) (1) 1 11x402-WC1 8.250 11.875 0.250 1 8 11.25 7.3 (203,2) (301,6) (6,3) (286) (3,3) 1.000 (25) 2.500 (63) 11x404-WC1 10.250 13.875 8.2 (260,3) (352,4) (3,7) Dimensions & Specifications 11x405-WC1 12.250 15.875 9.2 (311,1) (403,2) (4,2) 11x408-WC1 16.250 19.875 11.1 (412,7) (504,8) (5,0) 11x411-WC1 20.250 23.875 13.0 (514,3) (606,4) (5,9) 11x414-WC1 24.250 27.875 14.9 (615,9) (708,0) (6,8) 11x417-WC1 28.250 31.875 16.9 (717,5) (809,6) (7,7) 11x422-WC1 34.250 37.875 19.8 (869,9) (962,0) (9,0) 11x428-WC1 40.250 43.875 22.6 (1022,3) (1114,4) (10,2) 11x431-WC1 46.250 49.875 25.5 (1174,7) (1266,8) (11,6) 11x436-WC1 52.250 55.875 28.4 (1327,1) (1419,2) (12,9) 11x440-WC1 58.250 61.875 31.3 (1479,5) (1571,6) (14,2) 11x445-WC1 64.250 67.875 34.1 (1631,9) (1724,0) (15,5) - With Waycovers - D 1.250 (31,7) 2.500 (63,5) 2.500 (63,5) 2.000 (50,8) 1.500 (38,1) 2.500 (63,5) 2.500 (63,5) 2.500 (63,5) 2.500 (63,5) 2.500 (63,5) 2.500 (63,5) 2.500 (63,5) 2.500 (63,5) 2.500 (63,5) (1) Weight shown is with a 0.625 inch (16 mm) diameter screw, a 2 bearing carriage [1.8 lbs (0,82 kg)], a NEMA 23 motor mount [0.34 lbs (0,16 kg)], and a C100 style [0.09 lbs (0,04 kg)] coupling. When using a 0.500 inch diameter screw subtract 0.022 lbs per inch (0,00039 kg per mm) of screw length for a given model number. When using a 4 bearing carriage add 0.2 lbs (0,09 kg) to each value. version: 01/2014 ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 4. Technical Reference - Screw Drive - 110-WC1 Series 1.375 TYP (34,92) TYP .750 .375 (9,53) inches (mm) - With Waycovers - Threaded Stainless Steel Inserts: English Inserts (-1): (4) #8-32 x .25 inch deep TYP Metric Inserts (-2): (4) M4 thd. x 8 mm deep TYP (2) This value is center to center distance (spacing) of the bearings on a single rail (d2). Optional NEMA 23 Motor Mount Shown: (4) Holes on 2.625 (66,68) Bolt Circle Dia. 3.500 (88,90) Note: Any 100, 110, 120 or 130 series table can be mounted on top of any second 100, 110, 120 series table by the user, in order to create X-Y multiple axis configura-tions. The 100-CP1, 100-CP2, or 120 series tables require one of the Carriage Adapter Plate options. The carriage's threaded stainless steel insert hole pattern exactly matches the base mounting hole pattern on each table, therefore no extra adapter bracket or machining is required. However a precision square tool, or micrometer depth gauge, is required in order to obtain an orthogonality between the two tables of < 30 arc-seconds. The table base, carriage top & carriage sides are all precision machined. LINTECH's 100 series, 4 bearing carriage, should be used for the bottom axis in a mutiple axes application for better system rigidity, performance, and life. Specifications subject to change without notice Dimensions A (3) This value is center distance of the bearing to top of carriage plate surface (dr). .375 (9,53) (1) This value is center to center distance (spread) between the two rails (d1). 5.250 (133,35) .875 (22,23) Note: A pair of stainless steel retainer strips are furnished with each 110 series table. These strips are used to prevent the waycovers from falling away from the table in vertical, inverted or side mounted applications and must be installed by the user mounting surface. The retainer strips attach to the table via the base mounting screws. C E # of spaces C .193 (4,90) Dia.Thru Holes M # of Holes .156 TYP (3,96) TYP 3.188 (80,97) 1.750 (44,45) 2.500 (63,5) 2.500 (63,5) 2.500 D (63,5) D .344 TYP (8,74) TYP 4.000 (101,60) 3.188 (80,97) 2.375 (60,32) 2.500 (63,50) 0.406 TYP (10,31) TYP (19,05) .312 (7,92) o .375 (9,53) 303 Woodruff Keyway (1) For optional coupling info see pages C-40 & C-41. (2) B FOUR bearing carriage shown. TWO bearing carriage will have bearings centered on the carriage. .625 (3) (15,88) .75 (19,05) 2.088 (53,03) .375 (9,53) o 2.375 (60,33) 1.502 (38,15) Pilot Dia. TYP 2.375 (60,33) 2.312 (58,73) English Mount (M02): #10-24 thd. Metric Mount (M03): M5 thd. 1.188 (30,18) EOT & HOME Switch Cable Egress Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com