LOW COST DESIGN AND IMPLEMENTATION FOR HAS USING MULTIFUNCTIONAL WI-FI

International Journal of Computer Networks & Communications (IJCNC) Vol.9, No.3, May 2017
DOI: 10.5121/ijcnc.2017.9307 105
LOW COST DESIGN AND
IMPLEMENTATION FOR HAS USING
MULTIFUNCTIONAL WI-FI
Mohammad Al Rawajbeh
Al Zaytoonah University of Jordan, Faculty of Science and Information Technology,
Jordan.
ABSTRACT
Smart home technology nowadays became more popular and wide spread world around. The
communication network's appropriate coverage, flexibility and low cost made the Wi-Fi technology one of
the strongest choices in this field. The main purpose of this paper is to propose a simple, flexible and low
cost design of controlling home appliances and connecting other hardware using Wi-Fi network. The
ability of exploiting this design and implementation in different environment and possibility of integration
with other modern technology are considered the main benefit of the proposed design. The proposed
system provides connecting and controlling all available devices inside home using many sensors and
actuators. The monitoring process achieved by appropriate installed software on regular user computer or
handheld device.
KEYWORDS:
Wi-Fi, Smart Home, Wireless Sensor Networks, WLAN, Home Monitoring, HAS.
1.INTRODUCTION
The wireless communication technology and their standards have been widely used nowadays.
They bringing a fundamental changes to data networking, telecommunication, and is making
integrated networks a reality. There are a lot of standards and protocols for these technologies
such as wireless personal area network(WPAN), satellite communications, wireless local area
networks(WLAN), wireless wide area networks(WWAN). The variation of communication
protocols and their applications made these standard work as catalyst to change our life. [1].
The wide use and popularity of (WPAN) are achieved due to possibility of interconnecting
devices within a relatively small area, reachable by person. For example infrared, ZigBee, and
Bluetooth providing WPAN for interconnection devices to each other and support its applications.
Last decades, WPAN became the fundamental technology that made a revolution in home
automation concepts. Where this concept involves the control and automation of the different
home functions such as lighting, heating, ventilation, security etc. [2].
Modern homes automation systems consists of sensors and devices connected to the central
device. The central device is used to control the other devices and appliance in home using a

106
proper software with user interface. Different standards of WPAN such as ZigBee, Bluetooth and
sensors devices are considered for sensor network application for the cost and efficient use of
energy. In this domain, Wi-Fi can play a significant role offering an integration of IP-network
with existing home network infrastructure. The wide use Wi-Fi network in home automation
offers several advantages such as more efficient mobility, cost saving and wide deployment of
such systems in different environment as building, factories, and hospitals and educational
environments. The home automation market is in 2015 predicted to have a market value over 10
billion US$ by the year 2020.
1.2 . Literal Survey
Several researches and projects have been proposed and implemented with different approaches
to realizing home automation, since the home automation became an attractive field for various
technologies. Consequently, the management systems for such places are concentrating on
control and optimizing the services in these homes and facilitating living with more comfort,
security, low power consumption, and saving money and efforts [3,4]. Furthermore, smart homes
are developed to integrate new technologies and designs in order to bring a sense of well-being
and high quality of life to its users [5, 6].
The various environments automation and control systems based on wireless technology are used
more and more frequently now days. They provide more comfort when employed when wires
cannot be used. Zigbee is one of the most popular standards that used in Wireless Sensor
Networks for building home automation systems due to low power consumption and low cost,
furthermore, the support of various network configuration [7, 8, and 9]. The different standards
from manufacturers and their focus on their own proprietary networking protocols produced a
new challenges with interoperability.[9]. In several projects, for remotely control X-10
compliance transmitter and receivers through the powerline that already exist At home, the X-10
is used in [10]. This technology is mainly used for application such as lighting, security sensor
networks du to limitations in low speed and data rate. In [11]. The survey conducted that many
types of networks can use different kinds of technologies with more complex applications, which
can gain a high speed data rate. But the more complex infrastructure and applications means more
cost for setup and maintenance in such networks as depicted in fig 1.
Figure 1. HAS rate-cost [11]

107
Another key element that occupied a significant area in home automation environment is the
sensor networks. Sensor networks are typically consists of high number of sensing nodes,
communicating in a wireless multi-hop fashion. A. Special nodes (sinks) are usually employed to
gather results. Wireless sensor networks (WSNs) may provide various useful data from different
kinds of areas. Such networks may use for military, health care, home automation, and
surveillance purposes. Wireless Sensor Technologies are entering. Recently, offers many
opportunities for research and development. Consequently, it decease the costs of ownership,
increasing the technology of smaller sensing devices and achieving high level in radio frequency
technology and digital circuits [12].But this type of networks is faced several challenges related to
the short range, security reliability and resources issues [13].
Now days, the wireless technologies is reached their glamour since they are used in different
aspect of our life, everywhere and anytime. The declining of resources and the progress in
technological advances combination will be the main drivers for maintaining smart homes [14].
Increasing the number last decade of users who use the Wireless Local Area Network (WLAN),
wide spread use of Wi Fi technology and the popularity of internet gateways at homes will make
these technologies a strong candidate in home automation domain [15]. Wireless fidelity (Wi-Fi)
includes IEEE 802.11a/b/g standards for wireless local area networks (WLAN). Wi-Fi allows the
users to use the Internet at broadband speeds when connected to an access point (AP) or in ad-hoc
mode. The IEEE 802.11 architecture involves different components that interact with each other
in order to provide a wireless LAN that supports station mobility transparently to upper layers
[16, 17].
In [18]. The author reviewed and analyzed a wide range of network technologies that are mostly
used in home automation systems, and conducted that "To construct a smart home, the
infrastructure, composed of these technologies, needs to integrated", but the existence of many
standards in the market disturb the growth and evolution in this domain. In [19].authors proposed a
design and implementation of new controlling and monitoring system that used Wi-Fi technology
as a network infrastructure topology to connect its parts. Design provides an appropriate interface
to the sensors and actuators of the desired environment and provides scalability and flexibility that
can manage many hardware interfaces as long as it exists on the range of the Wi-Fi network
coverage.
1.3. Problem Statement
The deployment and efficient use of home automation systems encounter a several problems.
These problems related to different aspects of system design and implementation. At first coming
the problem of ownership cost. Deployment and wide use of such system have to be inexpensive
especially from the side of communication network. On the other side, the nature of home
environment and the deployment of appliances require high scalability due to the dynamic
topology of existing network and the needs for expanding the nodes and spreading them in home
environment.
The wide spread use of cellular technology and the smart hand held phones which didn’t require a
wire are changed the base requirements of home automation system. The majority of smart phone
users are seeking to be able to monitor and interact with their systems from anywhere and
whenever.

108
2.METHODOLOGY
The heterogeneity of different home technologies as mentioned in previous section is considered
as the main problem of developing a compatible, scalable and flexible home automation system.
So, the proposed methodology is based on using a wide rage used and compatible communication
technologies.
The proposed methodology is aim to achieve a system that perform a several functions and
services that provide homes with needed facilities, and the user's demands can be achieved.
The main functions that the proposed system is intended to achieve are:
• Home Security and monitoring
• Power consumption
• Distance control
• Increasing home comfort.
Regarding to the mentioned functions that the system have to obtained, the system must be able
to control the following devices:
• Door and windows lock
• Light status
• Camera
• Buzzer
• Ventilation and cooling systems
The proposed methodology of multifunctional Wi-Fi based system is consists of two main
module, hardware module and application module. These modules will cooperate with each other
to perform the needed tasks since the proposed system consists of operation tasks and control
tasks. These tasks have to basic for simplicity and ease of implementation.
The presented system architecture as depicted in fig 2, shows that the core hardware components
of this system is the microcontroller (PIC MCU). The microcontroller performs all the functions
that are related to the control of home environment through the dispersed different functional
sensors in home. The wireless fidelity is being achieved through the Wi-Fi module. The computer
interface is being performed using VB.net language. In addition to that, an amount of sensors are
being used to be controlled and logged to the PC via the Wi-Fi module.

109
Figure 2: Proposed System Architecture
The main hardware requirements used to design the system are the microcontroller that provides
the control and perform the processing task for the whole system, force sensor, smoke detector,
temperature sensor, dedicated Wi-Fi module, camera, GSM, Keypad and LCD, PC, and network
router.
Once the system on the personal computer turned on and the power turned on for the
microcontroller, the microcontroller starts collecting information and logging from the connected
sensors in the system environments and updates the measurements to the personal computer
systems that are logging the measurements.
The system on the PC ask for the value each specific time period chosen based on the application
and how the importance of the changes in the input value over the time, the microcontroller sends
the value over the RS232 port to the Wi-Fly module which send it to the connected router, now
the router send the data for the PC system which on or / off the alarm based on the critical
constant value selected to the application.
2.1 Hardware Module
The core component in hardware module is the microcontroller (PIC MCU). This component is
responsible for all processing tasks and control in the system. Arduino Mega 2560
microcontroller has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16
analogy inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection,
a power jack, an ICSP header, and a reset button. Furthermore, Arduino can be connected to a
computer with USP cable or powered by AC-to-DC adapter or battery to
The wireless fidelity can be achieved by using the Wi-Fi module. In proposed system, ESP8266
module is choosed for low cost and power consumption. ESP8266 Wi Fi Module is a self-
contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to
your Wi Fi network.
ESP8266 Pinouts are:Vcc -power supply 3.3 v, Gnd – Ground, RST- reset, CH-PD-Chip power
Down- Connected to 3.3V, Rx-Receive, Tx – Transmit, GPIO 0- Normal mode for HIGH
Programming Mode for LOW, GPIO 2 General purpose 2. The ESP8266 is presented in Fig 3.

110
Figure 3: Wi-Fi Module Based on ESP8266.
The main characteristics of ESP8266 module that made it the preferred choice are:
• The ability of sending it AT commands from a computer via an USB to serial adapter. This is
mostly useful for testing and setup.
• Interfacing with an Arduino or any other microcontroller and using this board as a peripheral.
• Programming the module directly and use its GPIO pins to talk to your sensors, eliminating
the need for a second controller. [14, 15].
However, using such type of Wi Fi model required taking in consideration the power problem
which faces the interconnection with Mega 2560, since Arduino Mega2560 work in 5vwhile
ESP8266 Wi Fi Module works in 3.3V. To solve such problem, a voltage divider circuit to
provide Wi Fi Module with needed voltage from Arduino.
To achieve all needed data and performing services in smart home, a several types of sensors are
used. A temperature sensor, light sensors, detect sensors and IR sensor.
2.1.1 Others Required Hardware
For other functions, such as security and monitoring purposes, we can equipped the system with
Web camera to monitor the moved objects through the home environment, buzzer for emergency
situations, servomotor to open and close windows and doors automatically. The temperature
sensors will connected to sense the variation of temperature and therefor switching the FAN or
AC on and off depending on the home environment temperature. GSM (Global System for
Mobile communication) allows an Arduino board to the internet, for sending and receiving SMS,
and making voice calls using the GSM library. GSM is an international standard and considered
as a second generation for mobile communication. A SIM card from communication service
provider is needed too. In this project, the main purpose of GSM is to send and receive messages
only. Keypad and LCD can be used for entering predetermined code and displaying the status of
entrance operations, these equipment is used for security purposes. The system hardware
components design is depicted in Fig 4.

111
Figure.4: The Interconnected Hardware Components of Proposed System
2.2 The Software Module.
The software for proposed system is consist of two parts: the microcontroller software and the
application software which will reside on the PC or server to collect and display the data from
hardware devices, camera and sensors.
The microcontroller software is coordinated by a 32-bit ESP8266 system-on-chip running a
firmware written in C++ programming language. The main function of microcontroller software
is collection the data from sensors and applying the appropriate action for the actuators. The flow
chart in Fig 5 shows the program installed on the Arduino and how it works.
2.2.1 Application Software
The server application software package for the proposed home automation system, is the VB.net
running on windows OS. The server application software can be accessed from internal network
or from internet if the server has real IP on the internet. The server application software is
responsible of setup, configuration, maintain the whole home automation system. The server uses
a database in order to keep log of home automation system components for future monitoring.
3.IMPLEMENTATION AND TESTING
The communication process, sending or receiving accomplished by the Wi-Fi technology using
the router and the Wi-Fly module and the PC, this provide flexibility and mobility for the control
and monitor the environment which used the multi functions Wi-Fi based presented system.
The PC system communicates with the Wi-Fi CAM throw the router. Both are using route to send
and receive the streaming video an images to control and monitor the objects selected. The system

112
develops a sequential transmitting of the logged data from sensors and camera to the network
router continuously through the Wi-Fi module. Through the dedicated Wi-Fi, the system is
supplied by the internet and the data is being logged and transmitted through the same Wi-Fi too.
In addition to that, the camera system is connected though the same Wi-Fi system achieving
different various functions though the same wireless connection system.
In addition to existing of Wi Fi CAM, the security is achieved by the keypad and LCD on home
entrance where a password is required to open main door by actuator/servomotor. Furthermore,
the outside door may open through GSM message which the owner may send from mobile device
and perform a distance control to home entrance or receiving warning message in case of three
failed tries to logging legally through the keypad.
The existence of light sensors usefulness is appeared in switching the light in home and around
ON/OFF depending on time, environment case and warning events alarms. The controlled use of
light for sure is contributing to minimize the consumption of light and limiting use only for
needed cases.
Temperature sensors are controlled through the microcontroller by implementing the needed
signal for switching the AC or fan ON/OFF regarding to in advanced stored value. This process
need continuously measurement and provide PC system with last measurement each time period.
The real picture of the proposed system hardware is presented in Fig 6.
Figure 5: Flow Chart of Arduino Software

Figure 6: The Real Picture of Proposed System
The accuracy of system handling multi
handling precision is the criteria of the system performance along the different working
conditions and measurements types. The sensors and camera sys
measurement is the task of the dedicated presented system, which should be performed in high
precision and reliability.
The achieved high connectivity and flexibilty for sure regading to the characteristics of Wi Fi
against other technologies. It know that the Wi Fi technology is operating
theoritically 54 Mbps, practically 11Mbps. It is a high data ra
systems that using other technologies such as Bluetooth which has a low data rate, about 1Mbps
or ZigBee where its data rate around 250 Kbps. Furthermore the Wi Fi is wide area coverage
comparing with other technologies
one technology in one systems such as Bluetooth and ZigBee or with Wi Fi technology. In such
cases the system will suffer from the coexistence problem and interferences which effect the
connectivity and reliability of system, since most of these technologies operate on the same
frequency range. For example, the coexistence of Wi Fi with ZigBee will effect the throughput of
ZigBee for 10% as minimum.
Figure 7: Results of connectivity
94%
95%
96%
97%
98%
99%
100%
Connectivity duty cycle
The Real Picture of Proposed System Hardware
The accuracy of system handling multi-functional tasks should be very accurate and the system
conditions and measurements types. The sensors and camera system control, in addition to the
against other technologies. It know that the Wi Fi technology is operating with high data rate,
Mbps, practically 11Mbps. It is a high data rate comparing with home automation
comparing with other technologies, it can reach 600 ft. Some home systems offered more than
and reliability of system, since most of these technologies operate on the same
: Results of connectivity duty cycle at different conditions
Connectivity duty cycle
Normal running of all
system in the room
temperature about 20 C
Running of the system at
temperature around 0 C
Running with high traffic
vision at temperature
around 20 C
113
functional tasks should be very accurate and the system
tem control, in addition to the
with high data rate,
te comparing with home automation
it can reach 600 ft. Some home systems offered more than
and reliability of system, since most of these technologies operate on the same

114
Figure 8: The Main Design Screen of Presented System
4.CONCLUSION
The proposed system has been experimentally proved to work correctly by connecting and testing
the system in different environments, which will give a flexibility and elasticity for the system.
That make the system fit for different environments for control and monitor based in the great
Wi-Fi technology. Wi-Fi is ubiquitous in these market segments, and as the backbone to the
internet, it is the easiest and cleanest choice for controlling the home.
The proposed system achieved the target to control, monitor, security, and cost effective design,
the proposed design provide better form for scalability and flexibility comparing with other
designs. In addition, using such system, several benefits are achieved like, reduction of
installation cost, since a single Wi Fi system can accomplish many functions with minimal
hardware setup. In addition, the presented system is easy deployment, installation, and coverage.
Wireless nodes can be mounted almost anywhere. Wireless technology such as Wi Fi can help to
enlarge the coverage area, deployment, and reconfiguration. Since most home is equipped with
Wi Fi , the optimal way for consumers to add functionality to the home is to add Wi-Fi endpoints.
Whether sensors , security systems, or locks, they all can be connected via Wi-Fi.
Flexibility, installation, and maintenance are considered the main requirements for developing
home automation systems, since most of different types of existing systems are suffering from the
diversity of standards and the problems related to coexistence of different types of technology
which complicate the configuration and the deployment of such systems. Such problems appear
when using ZigBee with Bluetooth, or ZigBee with Wi-Fi in the same system.
5.ACKNOWLEDGMENT
Author thanks Al Zaytoonah University of Jordan, for supporting this research.

115
FUTURE WORK
For connecting more devices and achieving an advance services, cloud technology is proposed to
be the target for the future work to migrate the proposed system with this technology.
REFERENCES
[1] Vijay, K. G (2007) Wireless communications and networking, San Francisco, CA 9411, Morgan
Kaufmann Publishers is an imprint of Elsevier.
[2] https://en.wikipedia.org/wiki/Home_automation
[3] Lodha R, Gupta S, Harshil Jain H,Narula.H (2015) Bluetooth Smart based Attendance
Management System. Procedia Computer Science 45 ( 2015 ), International Conference on
Advanced Computing Technologies and Applications (ICACTA-2015), 524 – 527
[4] Gayathri N, ,Vineeth V.V, Radhika N (2015) A Novel Approach In Demand Side Management
For Smart Home. Procedia Technology 21 (2015), SMART GRID Technologies, August 6-8, pp
526 – 532
[5] Buys, L, Barnett, K R, Miller E. & Bailey, C. (2005), Smart housing and social sustainability:
learning from the residents of Queensland's Research House. Australian Journal of Emerging
Technologies and Society, 3(1), 43-57.
[6] Demiris,G,& Hensel, B. (2009),Smart homes for patients at the end of life J. Housing Elderly 23
(1–2),106–115. http://dx.doi.org/10.1080/02763890802665049.
[7] Graham C.(2009), Conformity, Engineer’s Reference Guide; 14:178-181.
[8] Zigbee Alliance: Zigbee Vision for the Home, (2006): Zigbee Wireless Home Automation. Zigbee
Whitepaper
[9] Zigbee Alliance: Zigbee Enables Smart Buildings of the Future Today,(2007). Zigbee Whitepaper
[10] Valtchev,D,& Frankov,I., (2002), Service gateway architecture for a smart home, IEEE
Communications Magazine. 40(4) 126–132. http://dx.doi.org/10.1109/35.995862
[11] Toschi G M, Campos L P, Cugnasca C E.(2017), Home automation networks: A survey.
Computer Standards & Interfaces 50 (2017) 42–54
[12] Zhu J, (2010), Development of an Application-Oriented Wireless Communication Networks
Course for Engineering technology program, The Technology Interface Journal, 10(3),
https://www.researchgate.net/publication/228803225_Development_of_an_Application-
Oriented_Wireless_Communication_Networks_Course_for_Engineering_Technology_Program
[13] Alamri, A., Ansari, W.S., Hassan, M.M., Hossain, M.S., Alelaiwi, A.,& Hossain, M.A,(2013), A
survey on sensor-Cloud: Architecture, applications, and approaches, Int. J. Distributed Sensor
Networks (l )1-18.
[14] Andrew, C, A & NSW, I. (2012) SMART HOME: Possibilities for independent living "(part 1/2)
Independent living, 28(3), 16-18.
[15] Tozlu,S, Senel, M, Mao,W. & Keshavarzian, A (2012) Wi-Fi Enabled Sensors for Internet of
Things: A Practical Approach", IEEE Communications magazine, June, 134-143.
[16] James F. Kurose & Keith W. Ross (2005).A Top-down Approach Featuring the Internet. Addison
Wesley; 3rd edition.
[17] Porcino, D, & Hirt, H. (2003) Ultra-wideband radio technology: Potential and challenges ahead,
Communication Magazine, IEEE, .41(7), 66-74.
[18] Toschi, G.M, Campos, L.B, & Cugnasca, C.E 2017) Home automation networks: A survey.
Computer Standards & Interfaces 50 .42–54.
[19] Al Rawajbeh, M. & Haboush, A (2015) Advanced Object Monitoring Using Wireless Sensors
Network". Procedia Computer Science (65) International Conference on Communication,
Management and Information Technology (ICCMIT) Czech-Prague, April 20-22 2015.pp17 – 24.

116
Author
Dr. Mohammad Al Rawajbeh is an associate professor at the Computer Network
Department, Faculty of Science and Information Technology, AL Zaytoonah
University of Jordan. Received the High Diploma Degree in Computer Technology
from Yarmouk University, Jordan in 1991. Received B.SC and Master Degree in
computers and networks From Kharkov National Polytechnic University, Ukraine
from 1992-1996. Obtained his Ph.D. degree in Computer Network Management
from Kharkov National University of Radio-Electronic, Ukraine. His research
interests are in the fields of network management, performance evaluation, and
internet technology. He has more than 18 published articles in International Journals and Conferences.

LOW COST DESIGN AND IMPLEMENTATION FOR HAS USING MULTIFUNCTIONAL WI-FI

More Related Content

What's hot (20)

Similar to LOW COST DESIGN AND IMPLEMENTATION FOR HAS USING MULTIFUNCTIONAL WI-FI (20)

More from IJCNCJournal (20)

Recently uploaded (20)

LOW COST DESIGN AND IMPLEMENTATION FOR HAS USING MULTIFUNCTIONAL WI-FI