Magic cube final

User’s Guide

• Copyright:
Copyright 2011
All rights reserved by Celluon. All page contents are properties of Celluon.
• Celluon, evoMouse®, Magic Cube™ are trademarks or registered trademark of Celluon.
All other products are trademarks or registered trademarks of their respective
companies.
• Please refer to host device instruction manual for Bluetooth pairing information.

Safety Precautions surfaces. Place the product on a flat surface. Avoid table
or surface that is as transparent or reflective as glass or
1. Avoid exposing this product to direct sunlight for extend- mirror.
ed periods of time, and keep it away from heat sources.
2. There is a risk of malfunction if product is used in places
where sudden or extreme temperature changes occur. FCC Compliance Information
3. Applying excessive force or impact to this product may
result in product damage, and will void warranty.
4. To ensure safety and prevent damage, use only the dedi-
cated mini-USB to USB cable supplied with this product. This device complies with Part 15 of the FCC Rules.
5. Never attempt to disassemble or service this product Operation is subject to the following two conditions:
yourself. Doing so can result in electrical shock and will 1. This device may not cause harmful interference to another
void the warranty. device, and
6. This Class 1 laser product is certified by FDA safety regula- 2. This device must accept any interference received, includ-
tion. For your safety, please do not stare directly into the ing interference that may cause undesired operation.
laser source. Doing so could damage your eyes.
7. Avoid placing any object within the space between the
main unit and the laser projection keyboard layout.
8. Please do not use this product on uneven or irregular

2 3

FCC Class B Notice - Reorient or relocate the receiving antenna.
- Increase separation between the equipment and receiver.
This equipment has been tested and found to comply within - Connect the equipment to an outlet on a circuit different
the limits for a Class B digital device, pursuant to Part 15 of from which the receiver is connected.
the FCC Rules. - Consult the dealer or an experienced radio/TV technician
These limits are designed to provide reasonable protection
against harmful interference when the equipment is oper-
ated in a residential environment.
FCC Warning
This equipment generates, uses, and radiates radio fre-
quency energy, and if not installed and used in accordance This equipment generates and uses radio frequency energy.
with the instructions, may cause harmful interference to If this equipment is changed or modified in any way except
radio communications. for modifications approved in this manual, it may cause
However, there is no guarantee that interference will not harmful interference. Any unauthorized changes or modifica-
occur with special tions to this equipment could void the user’s authority to
installation. If this equipment does cause interference to operate this device.
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
correct the interference by one of the following measures:

4 5

RF Exposure Information possibility of exceeding the FCC radio frequency
exposure limit.
The antenna used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all per- ❏ Laser Safety
sons and must not be co-located or operating in conjunction IEC 60825 : CLASS I
with any other antenna or transmitter. FDA : CLASS II

❏ Caution : Battery may explode if replaced with an in-
compatible battery. Dispose the used batteries
according to the instructions. “ This transmitter Class 2 Laser Product
must not be co-located or operated in conjunc-
tion with any other antenna or transmitter.”
KCC-CMM-CLK-
RoHS
compliant
MagicCube
❏ Caution : Antenna shall be mounted in such a manner
to minimize the potential for human contact
during normal operation. The antenna should
not be touched during operation to avoid the

6 7

❏ Environmentally Friendly Disposal and Recycling About the Built-in Battery
Rechargeable Lithium Polymer Battery:
Battery Operating Time: Approx. 150 minutes (with con-
tinuous use)
Capacity: 700mAh (Max)@3.7V
Charging the Battery: Use supplied USB cable to begin
charging the battery. When the charging is complete, bat-
tery status LED turns green.
Charging Time: Approx.240 minutes
This product does not contain any substances known to be
Note
hazardous to human health. To protect the environment,
Charging time increases if product is used while charging.
dispose of this product separately from household waste
once it has reached its end of life, or take it to your nearest
Celluon Service Center.

8 9

Cautions Contents
1. For safety reasons, be sure to use only the mini USB to 1. Product Features ........................................................12
USB cable specified for this product.
2. Make sure to fully charge the battery before using the 2. Package Contents ......................................................12
product for the first time. 3. How this Product Works .........................................13
3. Battery charging times may vary slightly depending on
the ambient temperature. 4. Identifying Parts and their Functions. ................17
4. The battery may not be charge to 100 percent of its 5. Using the Projection Keyboard .............................21
rated cell capacity even when the battery status LED
indicates green light. 5.1 Connecting via USB HID ..................................21
5. Using or storing the battery in high temperature, 5.2 Connecting via Bluetooth HID ......................22
humidity and pressure environments may cause the
Specification .....................................................................44
battery to explode.
6. Since the battery is a consumable item, its storage
capacity decreases gradually as time passes.

10 11

1. Product Features 3. How this Product Works
• English QWERTY keyboard layout. This product emits infrared light from the lower end
• Compact size for portability – perfect for on-the-go of the product to detect objects such as fingers. When
• Function icons and shortcut keys for ease of operation an object passes through the area illuminated by the
• Non-mechanical optical mechanism for superior infrared light source, any infrared light reflecting off the
durability object is detected by the sensor. Information on the
• Built-in Lithium Polymer rechargeable battery for position and movement of the object is then analyzed to
mobility and perform the product’s role as a keyboard.
convenience Sensitivity: difference in thickness, shape, and color of
• Compatible with latest devices: Window XP/Vista/7, the user’s fingers or operating environment result in
Windows Phone 7, iOS4 (iPhone3GS/4, iPad), and differences in the amount of reflected infrared light. If
Android 2.2 or higher the amount of reflected infrared light is appropriate, the
sensor will have no problem detecting objects such as
2. Package Contents fingers. However, if the amount of reflected infrared light
• Projection Keyboard becomes low because of the causes mentioned above
• USB Cable or some other cause, the keystroke recognition rate may
decrease or your keystrokes may not be recognized at
• User’s guide all. On the other hand, if the amount of reflected infrared
12 13

light is too high, the keystroke recognition may become Conditions to Avoid:
too sensitive or a “hovering” effect may occur. 1. Avoid direct sunlight
(Hovering: keystroke is recognized before your finger 2. Avoid low color temperature light source, such as tung-
touches the projection surface.) sten, halogen, or incandescent lamp is used.
3. Avoid uneven or irregular surfaces. Place the product on
Therefore, it is necessary to compensate for differences in flat surfaces.
finger characteristics or operating environment, and this 4. Avoid a table or surface that is as transparent or reflec-
can be accomplished by adjusting the sensitivity of your tive as glass or mirror.
projection keyboard. 5. Avoid placing any objects within the space between the
Given the same amount of reflected infrared light, in- main unit and the laser projected keyboard layout.
creasing the sensitivity will produce the effect of a higher
amount of reflection, whereas decreasing the sensitivity Note
will produce the effect of a lower amount of reflection. Because this product uses infrared rays, strong infrared
With the sensitivity set to its minimum value, repeatedly radiation from direct or reflected sunlight or from tungsten
press a key that is relatively far from the sensor (Spacebar, (halogen or incandescent) lighting may cause operating error.
CTRL, etc.) to increase the sensitivity. As soon as your
keystroke is recognized, stop adjusting the sensitivity and
set the final setting value to one or two notches above
original setting.
14 15

Caution 4. Identifying Parts and their Functions.
Although this equipment is classified as Class 1 laser product, (1) Projector: Uses a red laser to project the image of a
for your safety, do not directly expose your eyes to pattern
keyboard onto a flat surface in front of the typist.
projection beams or infrared rays.
(2) Sensor: Picks up the infrared light reflected off the
typist’s fingers and triangulates the location of the
reflected light to determine which key was pressed.
This sensor provides a keyboard function.
(3) IR Light Window: Uses an infrared laser to emit an
invisible plane of light a few millimeters above the
projection surface so that the infrared light can be
reflected off of the typist’s fingers to the sensor.

Caution
If one or more of the above modules are blocked by some
cause, the projected keyboard image may not be displayed
correctly or, the location and movement of the typist’s
fingers may not be recognize correctly.

16 17

Front View Rear View

Pattern Projector
STRAP LOOP

Sensor
POWER SWITCH
Battery / Bluetooth/
Keyboard/ Mouse/
Charging/ Operating
Status LED

Battery Lower LED USB USB Upper LED
Charging Red Connected Green Green HID/SPP MODE
MINI USB PORT
Full Green Keyboard Upper LED SWITCH
Low Orange Connected via USB Green
HID Upper LED Connected via HID Bright Blue
Searching last device Bright Blue(blinking) Connected via SPP Bright Blue
Searching new device Dark Blue(blinking) Mouse Mode Upper LED
Successful pairing Bright Blue Connected via USB Green (blinking)
Disconnected Blue and Green(alternating) Connected via HID Bright Blue(blinking)
SPP Upper LED Connected via SPP Bright Blue(blinking)
Searching for device Dark Blue(blinking)
Successful pairing Bright Blue
Disconnected Blue and Green(alternating)

18 19

USB Connection Terminal 5. Using the Projection Keyboard
1. Purpose: USB device connection or power supply.
This product is used as a keyboard and mouse via Blue-
2. USB Connector: Standard USB Mini-B type
tooth HID and USB HID connection.
3. Interface Specification: Compliant with USB HID class
specification version 1.11 5.1 Connecting via USB HID
4. Input Power: 0.5A 5V dedicated DC adapter or USB Bus
This device is compatible with all USB HID capable oper-
power from a host device.
ating system.
Bluetooth Connection Switches USB HID connection allows plug-n-play, without install-
1. Bluetooth HID Switch (Top) ing a separate driver.
2. Bluetooth SPP Switch (Bottom) 1) Connect Magic Cube™ and host device using supplied
USB cable. Host device must support USB HID. Note:
Most Windows devices support USB HID.
2) Turn on Magic Cube™.
3) Green LED indicates proper connection. If LED indi-
cates blue, please check the connection.

20 21

5.2 Connecting via Bluetooth HID Bluetooth HID compatible devices
Magic Cube™ supports two types of Bluetooth: • iOS4 (iPhone 3GS/4/iPad and later)
• Connection via Bluetooth HID does not require installa- • Android 2.2 and later
tion of separate driver. * Some restrictions apply to Android devices. Please
• Connection via Bluetooth SPP requires installation of visit our website www.celluon.com for more informa-
diver, in the installation CD. tion on connecting Magic Cube™ to Android devices.
• Windows XP/Vista/7
User must identify and use correct Bluetooth profile prior • Windows Phone 7
to connection. • Mac OS (using Keyboard only)
Bluetooth profiles can be selected through slide switch
behind the device: Bluetooth connection instruction
- HID mode: Slide the switch up 1. Power on Magic Cube™
- SPP mode: Slide the switch down 2. Blue LED will blink in steady interval, an indication
- (HID mode is set as default) that the device is ready to pair.

Note When Blue LED indicates one long, followed by two
Choosing the right Bluetooth mode quick blinks, the device is searching for previously paired
device within its proximity.

22 23

This will last 30 seconds. This feature is added for con- ■ Changing keyboard mode to mouse mode
venience, assuming there is a single host device. On the keyboard, press and hold “FN” key and tap
Upon successful pairing, Blue LED will stop blinking and (do not press and hold the button) the mouse cursor
become solid blue. key, located adjacent to space bar. A green LED will
indicate successful change of mode.
If Magic Cube™ cannot locate previously paired host ■ Changing mouse mode to keyboard mode.
device within 30 seconds, it will delete previously stored Tap only mouse cursor button once (do not press and
connection information and revert to pair mode. hold the button).
• SPP Mode: Blue LED will blink in intervals, indicating ■ Adjusting key stroke sound level
that the device is ready to pair • Increasing key stroke sound level
3. Upon successful pairing, Blue LED will stop blinking Press and hold “FN” key and press up arrow key.
and become solid blue. • Lowering keystroke sound level
Please refer to the host device manual for pairing Press and hold “FN” key and press the down arrow
instructions. key. There are total 6 levels of sound, including
4. After successful pairing of host device and Magic mute.
Cube™, keyboard function is default mode. • Sound level remains as adjusted when device is
turned off and on. Please consider the environment
when adjusting sound level.

24 25

■ Adjusting keyboard brightness ■ Connecting to iPhone and iPad
• Press and hold “FN” key and press right arrow key to iPhone and iPad connects to Magic Cube™ via Blue-
increase brightness. tooth HID and a driver is not required.
• Press and hold “FN” key and press left arrow key to 1) Make sure the Magic Cube™ is on a HID mode. (Slid-
lower brightness. ing button should be pushed to ‘up’ position).
• There are three levels of brightness. Default bright- 2) Turn on Magic Cube™ by sliding the power button
ness is set at second level during power on. to the right. A blinking blue LED indicates that the
device is ready to pair.
Note 3) On iPhone/iPad, tap on Settings-General-Bluetooth.
FN key is not a repeat key. FN key must be clicked once for
each adjustment.

26 27

4) Turn Bluetooth on by tapping the ON button. 6) Locate “Celluon” under Device.

5) iPhone/iPad will now search for pairing device. 7) Select “Celluon” by tapping “Celluon”.

28 29

8) A message will pop up “Celluon would like to pair 10) Successful pairing is indicated by “Connected”
with your phone. Enter the passkey “xxxx” on Cel- message, and blue LED on Magic Cube™ becomes
luon”. solid.

9) Type passkey on Magic Cube keyboard and press
ENTER. 11) To turn off Magic Cube™, slide power button to the
left.
12) With iPhone/iPad Bluetooth on, Magic Cube™ will
connect automatically upon power on.

30 31

13) With Magic Cube™ ON from initial connection, ■ Connecting to Android devices
iPad/iPhone will connect automatically when Some Android 2.2 and higher devices support
Bluetooth is turned back on from host device. Bluetooth HID and it does not require installation of
14) Please turn off Magic Cube™ when keyboard is not separate driver. Please visit our website www.celluon.
in use. com for more information on Android drivers.
Note Pairing your Android device
iPhone/iPad OS (iOS4) does not support mouse function. 1) Make sure the Magic Cube™ is on SPP mode by slid-
When keyboard does not function with successful pairing, ing the slide button to lower position.
please make sure the device is in keyboard mode. If device 2) Turn on Magic Cube™ by sliding the power button
is in mouse mode, tap the cursor button located adjacent
to the right. A blinking blue LED indicates that the
to spacebar to change back to keyboard mode.

32 33

3) Navigate through Android as follows: 4) Turn on Bluetooth on Android by checking the box.
Home → Main Menu → Settings → Wireless and
Network → Bluetooth setting.

34 35

5) From the same screen, with Bluetooth ON, tap on 6) Android device will detect “Celluon” and display
Scan devices. message “Pair with this device”.

7) Tap on “Pair with this device”.
8) A new message will display on your Android device:
“Bluetooth pairing request. Enter PIN xxxxxx to pair
with ‘Celluon’.”

36 37

9) Type passkey on Magic Cube™ and press ENTER. ■ Connecting to PC
When correct passkey is entered, the Android Windows 7 supports Bluetooth HID and installation of
device is paired. separate driver is not required.
Connecting via Bluetooth HID
Note 1) Please make sure Magic Cube™ is on HID mode by
Android OS supports mouse function. To switch from sliding the switch to the up position.
keyboard to mouse mode, press and hold “FN” button 2) Turn on Magic Cube™ by sliding the power button
and tap the cursor button, located adjacent to space to the right. A blinking blue LED indicates that the
bar. To change back to keyboard mode, tap cursor
button once.
3) Please check your PC and make sure
Bluetooth is on.
4) With Bluetooth on, click on Bluetooth icon on the
task bar. Windows will search and locate “Keyboard.”
Highlight keyboard by clicking on found device and
press next.
5) Enter passkey on Magic Cube™ and press ENTER.
6) If you choose “create passkey” option, it will display
an 8-digit passkey.
7) Press the passkey on the Magic Cube and press
38 39

ENTER. Note
8) Successful paring will be indicated by solid blue LED Windows 7 supports multi-touch mouse function. To
on the Magic Cube™ device. switch from keyboard to mouse mode, press and hold
9) To turn off Magic Cube™, slide the power button to “FN” button and tap the cursor button, located adjacent
the left (OFF). to space bar. To change back to keyboard mode, tap the
10) Magic Cube™ will connect to host PC automatically cursor button once.
when turned back on.
Additional features:
Connecting via USB HID for Windows and Mac (Plug-n-
Volume adjustment (key click feedback sound) –
play)
1. Press and hold FN and tap ‘up’ arrow to raise volume
1) Connect the host device and Magic Cube™ using mini-
2. Press and hold FN and tap ‘down’ arrow to lower
USB to USB cable.
volume
2) Turn on Magic Cube™ by slide the power button to the
* Note: There are 6 stages of adjustments. Each adjust-
right (ON).
ment requires repeated steps.
3) Successful connection is indicated by solid green LED.

Projection keyboard brightness adjustment –
1. Press and hold FN and tap ‘right’ arrow to increase
brightness

40 41

2. Press and hold FN and tap ‘left’ arrow to lower bright- 2. From mouse mode, tap on cursor button to switch
ness back to keyboard mode. Solid LED indicates keyboard
* Note: There are 3 stages of adjustments. Each adjust- mode.
ments requires repeated steps. * Please note: mouse function is only available on
Power save mode – devices that support cursor/mouse function.
1. Press and hold FN and tap BACK key to disable laser
projection Special keys –
2. To reactivate laser projection, tap in the operation area 1. Please note that not all keys displayed on projection
with 3 fingers (3 fingers must be separated). keyboard layout correspond to input keys on host
device. For example, MENU key will not function on a
Switching between keyboard and mouse mode – host device that does not support the MENU function.
(Note: default mode is keyboard function) Same applies to FN and ALT function keys.
1. From keyboard mode, press and hold FN and tap on
cursor button, located adjacent to space bar to switch
to mouse function. Blinking LED indicates mouse
mode.

42 43

Specification ■ Electrical Characteristics
Item Specification
■ Pattern Projector
External Power
Item Specification USB Power / less than 5V 500mA
Supply
Light Source Red Laser Diode Lithium-polymer battery,
Battery & Capacity
Keyboard Layout 19mm Pitch, QWERTY Layout 700mAH(MAX)@3.7V
Keyboard Size Width : 240mm, Height : 100mm Battery Operating
Approx. 150min
100mm from the Bottom of the Time
keyboard Location
Device Battery Charging
Approx. 240min
Project Surface Non-reflective, opaque flat surface Time
USB 1.1 & 2.0, USB HID Ver 1.0, SPP
USB Interface
■ Keyboard Sensor Ver 1.2
Item Specification Bluetooth v1.1 class 2, HID/SPP Profile
Approx. up to 350 characters per Frequency Range 2402-2480MHz
Recognition Rate
minute Channel 79
Operating Surface Any firm flat surface Modulation GSFK

44 45

■ Environmental Conditions
Item Specification
Operating Tem-
0 ~ 35°C
perature
Storage Tempera-
-5 ~ 35°C (with Batteries included)
ture

■ Dimensions and Weight Specifications
Item Specification
Size(mm) 38mm x 75mm x 29mm
Weight (g) Max. 78 g

Celluon, Inc.
Ace High-End Tower 918, 235-2 Guro-dong, Guro-gu,
Seoul, Korea (152-740)
sales@celluon.com , support@celluon.com
46

Magic cube final

More Related Content

What's hot (17)

Similar to Magic cube final (20)

Recently uploaded (20)

Magic cube final