M&i(lec#01)
- 1. Microprocessor & Interfacing Lecture # 01 Microprocessor – Overview & Classification
- 2. Microprocessor - Overview Microprocessor is a controlling unit of a micro-computer, fabricated on a small chip capable of performing ALU (Arithmetic Logical Unit) operations and communicating with the other devices connected to it. ◦ Microprocessor consists of an ALU, register array, and a control unit. ALU performs arithmetical and logical operations on the data received from the memory or an input device. Register array consists of registers identified by letters like B, C, D, E, H, L and accumulator. The control unit controls the flow of data and instructions within the computer.
- 3. How does a Microprocessor Work? The microprocessor follows a sequence: Fetch, Decode, and then Execute. Initially, the instructions are stored in the memory in a sequential order. The microprocessor fetches those instructions from the memory, then decodes it and executes those instructions till STOP instruction is reached. Later, it sends the result in binary to the output port. Between these processes, the register stores the temporarily data and ALU performs the computing functions.
- 4. List of Terms Used in a Microprocessor Some of the frequently used terms in a microprocessor − Instruction Set − It is the set of instructions that the microprocessor can understand. Bandwidth − It is the number of bits processed in a single instruction. Clock Speed − It determines the number of operations per second the processor can perform. It is expressed in megahertz (MHz) or gigahertz (GHz).It is also known as Clock Rate. Word Length − It depends upon the width of internal data bus, registers, ALU, etc. An 8-bit microprocessor can process 8-bit data at a time. The word length ranges from 4 bits to 64 bits depending upon the type of the microcomputer. Data Types − The microprocessor has multiple data type formats like binary, BCD, ASCII, signed and unsigned numbers.
- 5. Features of a Microprocessor Some of the most prominent features of any microprocessor − Cost-effective − The microprocessor chips are available at low prices and results its low cost. Size − The microprocessor is of small size chip, hence is portable. Low Power Consumption − Microprocessors are manufactured by using metal oxide semiconductor technology, which has low power consumption. Versatility − The microprocessors are versatile as we can use the same chip in a number of applications by configuring the software program. Reliability − The failure rate of an IC in microprocessors is very low, hence it is reliable.
- 6. Microprocessor - Classification A microprocessor can be classified into three categories
- 7. RISC Processor RISC stands for Reduced Instruction Set Computer. It is designed to reduce the execution time by simplifying the instruction set of the computer. Using RISC processors, each instruction requires only one clock cycle to execute results in uniform execution time. This reduces the efficiency as there are more lines of code, hence more RAM is needed to store the instructions. The compiler also has to work more to convert high-level language instructions into machine code. ◦ Some of the RISC processors are − Power PC: 601, 604, 615, 620 DEC Alpha: 210642, 211066, 21068, 21164 MIPS: TS (R10000) RISC Processor PA-RISC: HP 7100LC
- 8. Architecture of RISC RISC microprocessor architecture uses highly-optimized set of instructions. It is used in portable devices like Apple iPod due to its power efficiency.
- 9. Characteristics of RISC The major characteristics of a RISC processor are as follows − It consists of simple instructions. It supports various data-type formats. It utilizes simple addressing modes and fixed length instructions for pipelining. It supports register to use in any context. One cycle execution time. “LOAD” and “STORE” instructions are used to access the memory location. It consists of larger number of registers. It consists of less number of transistors.
- 10. CISC Processor CISC stands for Complex Instruction Set Computer. It is designed to minimize the number of instructions per program, ignoring the number of cycles per instruction. The emphasis is on building complex instructions directly into the hardware. The compiler has to do very little work to translate a high-level language into assembly level language/machine code because the length of the code is relatively short, so very little RAM is required to store the instructions. ◦ Some of the CISC Processors are − IBM 370/168 VAX 11/780 Intel 80486
- 11. Architecture of CISC Its architecture is designed to decrease the memory cost because more storage is needed in larger programs resulting in higher memory cost. To resolve this, the number of instructions per program can be reduced by embedding the number of operations in a single instruction.
- 12. Characteristics of CISC Variety of addressing modes. Larger number of instructions. Variable length of instruction formats. Several cycles may be required to execute one instruction. Instruction-decoding logic is complex. One instruction is required to support multiple addressing modes.
- 13. Special Processors These are the processors which are designed for some special purposes. Few of the special processors are briefly discussed − Coprocessor A coprocessor is a specially designed microprocessor, which can handle its particular function many times faster than the ordinary microprocessor. ◦ For example − Math Coprocessor. Some Intel math-coprocessors are − 8087-used with 8086 80287-used with 80286 80387-used with 80386
- 14. Special Processors Input/Output Processor It is a specially designed microprocessor having a local memory of its own, which is used to control I/O devices with minimum CPU involvement. ◦ For example − DMA (Direct Memory Access) controller Keyboard/mouse controller Graphic display controller SCSI port controller
- 15. Special Processors Transputer (Transistor Computer) A transputer is a specially designed microprocessor with its own local memory and having links to connect one transputer to another transputer for inter-processor communications. It was first designed in 1980 by Inmos and is targeted to the utilization of VLSI technology. A transputer can be used as a single processor system or can be connected to external links, which reduces the construction cost and increases the performance. For example − 16-bit T212, 32-bit T425, the floating point (T800, T805 & T9000) processors.
- 16. Special Processors DSP (Digital Signal Processor) This processor is specially designed to process the analog signals into a digital form. This is done by sampling the voltage level at regular time intervals and converting the voltage at that instant into a digital form. This process is performed by a circuit called an analogue to digital converter, A to D converter or ADC. A DSP contains the following components − ◦ Program Memory − It stores the programs that DSP will use to process data. ◦ Data Memory − It stores the information to be processed. ◦ Compute Engine − It performs the mathematical processing, accessing the program from the program memory and the data from the data memory. ◦ Input/Output − It connects to the outside world. Its applications are − ◦ Sound and music synthesis ◦ Audio and video compression ◦ Video signal processing ◦ 2D and 3d graphics acceleration. For example − Texas Instrument’s TMS 320 series, e.g., TMS 320C40, TMS320C50.