Manual cms ( central management system ) / Video Viewer for AVTECH DVR

Central Management System
(CMS)
USER MANUAL

Please read instructions thoroughly before operation and retain it for future reference.

CMS_V0.9

LEGAL INFORMATION
Reproduction, transfer, distribution or storage of part or all of the contents in this document in
any form without the prior written permission of the company is prohibited.
Microsoft, Windows and the Windows® logo are either registered trademarks or trademarks of
Microsoft Corporation registered in the United States and/or other countries.
Product and company names appearing in this document are trademarks of each respective
company or organization.
Under no circumstances shall we be responsible for any loss of data or income or any special,
incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided “as is”. Except as required by the applicable law, no
warranties of any kind, either express or implied, including, but not limited to, the implied warranties
of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability
or contents of this document. All the pictures in this manual may vary from the actual ones you see
because different device may have its own setting pages. We reserve the right to revise this
document or remove it at any time without prior notice.

MPEG4 Licensing
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR
THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN
COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING
MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY
MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY
OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL
AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE
HTTP://WWW.MPEGLA.COM.

Version: 0119

TABLE OF CONTENTS
1. OVERVIEW......................................................................................................................................... 1
1.1 Product Features .........................................................................................................................................................1
1.2 Before Using The Software..........................................................................................................................................1

2. NETWORK CONNECTION ................................................................................................................ 2
2.1 Install the software .......................................................................................................................................................2
2.2 Network Connection via LAN.......................................................................................................................................2
2.3 Network Setting............................................................................................................................................................5
2.4 Change the password ..................................................................................................................................................7

3. CONTROL PANEL OVERVIEW .......................................................................................................... 8
3.1 Accessing the device ...................................................................................................................................................8
3.2 Control panel overview ................................................................................................................................................8
3.2.1 Simplified Version (Default)................................................................................................................................................8
3.2.2 Full Function Version .........................................................................................................................................................9
3.2.3 Main Button Overview........................................................................................................................................................9

4 FREQUENTLY-USED FUNCTIONS ...................................................................................................11
4.1 Record ....................................................................................................................................................................... 11
4.2 Playback .................................................................................................................................................................... 11
4.2.1 Playback Panel ................................................................................................................................................................12

4.3 Full Screen Display ....................................................................................................................................................12
4.4 Live Audio Volume Adjustment ..................................................................................................................................13
4.5 Network Backup (DVR Only) .....................................................................................................................................13
4.6 Firmware / OSD / Logo Upgrade ...............................................................................................................................13
4.7 E-Map ........................................................................................................................................................................14

5. ADDRESS BOOK ............................................................................................................................. 19
5.1 Overview ....................................................................................................................................................................19
5.2 Configuration Page for Device Access ......................................................................................................................20

6. RECORD .......................................................................................................................................... 21
6.1 Overview ....................................................................................................................................................................21
6.2 Record Time Range ...................................................................................................................................................21
6.2.1 Weekly .............................................................................................................................................................................21
6.2.2 Custom.............................................................................................................................................................................22

6.3 Record Path ...............................................................................................................................................................22

7. STATUS LIST.................................................................................................................................... 23
7.1 Overview ....................................................................................................................................................................23
7.2 Log Searching............................................................................................................................................................23
7.2.1 Time Range......................................................................................................................................................................23
7.2.2 Record Type.....................................................................................................................................................................24
7.2.3 Log List ............................................................................................................................................................................24

8. DVR / PTZ CONTROL ...................................................................................................................... 25
8.1 DVR Control Panel.....................................................................................................................................................25
8.2 PTZ Control................................................................................................................................................................26

9. SYSTEM CONFIGURATION ............................................................................................................ 28
9.1 General ......................................................................................................................................................................29
9.1.1 Log...................................................................................................................................................................................29
9.1.2 Account ............................................................................................................................................................................29
9.1.3 OnLineUser......................................................................................................................................................................31

9.2 Network......................................................................................................................................................................31
9.2.1 DDNS...............................................................................................................................................................................31
9.2.2 SNTP ...............................................................................................................................................................................32
9.2.3 FTP ..................................................................................................................................................................................32
9.2.4 MAIL ................................................................................................................................................................................32

9.3 Video ..........................................................................................................................................................................33
9.4 DVR............................................................................................................................................................................33
9.4.1 Camera ............................................................................................................................................................................34
9.4.2 Device ..............................................................................................................................................................................34
9.4.3 Detection..........................................................................................................................................................................35
9.4.4 Record .............................................................................................................................................................................35
9.4.5 Record Timer ...................................................................................................................................................................36
9.4.6 Alert..................................................................................................................................................................................36
9.4.7 Display .............................................................................................................................................................................37

APPENDIX 1 SPECIFICATIONS .......................................................................................................... 38
APPENDIX 2 SUBSCRIBING DDNS SERVICES ................................................................................. 39

1. OVERVIEW
Video Viewer, the free Central Management System (CMS) software, offers a powerful and
integrated solution for centrally managing and monitoring. Running on Microsoft® Windows® 2000,
XP or Vista, each CMS server can manage up to 16 devices simultaneously.
The friendly graphical interface with full functions for the advanced management, intelligent motion
detection, flexible scheduled recording and quick event search makes this CMS software excellent
for every security demand. Furthermore, EMAP is also supported for quick and convenient multi-site
surveillance.

1.1 Product Features
Multi-site surveillance and full central management software running on Windows 2000,XP or Vista
Allows multiplex operations (live view, record, playback, backup and network) equipped with intelligent
motion detection function
Google map connection for EMAP application
Pre- and post-event recording to capture full evidence
Full record log and graphical design for quick event search
PTZ camera control

1.2 Before Using The Software
Before using Video Viewer, make sure:
1) You have installed the software from the supplied CD, and its version is 0119 or later.
2) You have configured the network settings, and the network connection to each device is fine.
To know how to configure network setting, please refer to “2. NETWORK CONNECTION” at page 2.
To know how to use this software, please refer to “3. CONTROL PANEL OVERVIEW” at page 8.
To know how to configure your device, please refer to “9. SYSTEM CONFIGURATION” at page 28.

1

2. NETWORK CONNECTION
Note: The screen capture displayed in the manual may vary from the one you
actually see because different device with different model number may have
different display. However, the system configuration method should be the
same.

2.1 Install the software
Step1: Place the supplied CD into your CD-ROM or DVD-ROM drive. The program will be
automatically run.
Step2: Click “Licensed Software AP” to install Video Viewer, or click “Download The Latest
Version” under “Licensed Software AP” to download the latest version of Video Viewer
from the Internet (if your PC is connected to Internet).
Step3: Follow the on-screen instructions to finish the installation. When the installation is
completed, a shortcut icon “

” will be placed on your PC desktop.

2.2 Network Connection via LAN
Step1: Connect your device (such as a DVR or network camera) and PC via a RJ45 network
cable, and make sure the device is powered on.
Step2: Set the PC’s IP address as “192.168.1.XXX” (1~255, except 10).
For Windows 2000 users:
a) Select “Start” “Settings” “Network and Dial-up Connections”.
b) Right-click on “Local Area Connection”, and select “Properties”.

c) In the “General” tab, select “Internet Protocol (TCP/IP)”, and select “Properties”.

2

d) In the “General” tab, select “Use the following IP address”, and set the IP address as described above.

e) Click “OK” to close the “Internet Protocol (TCP/IP) Properties” dialog box. Then, click “Close” to close
the “Local Area Connection Properties” dialog box.

For Windows XP users:
a) Select “start” “All Programs” “Control Panel”
Connections” (If you’re in “Category View”).

“Network and Internet Connections”

“Network

b) In “LAN or High-Speed Internet”, right-click on “Local Area Connection”, and select “Properties”.

c) In the “General” tab, select “Internet Protocol (TCP/IP)”, and select “Properties”.
e) Click “OK” to close the “Internet Protocol (TCP/IP) Properties” dialog box. Then, click “Close” to close
the “Local Area Connection Properties” dialog box.

For Windows Vista users:
a) Select “
” (start) “Control Panel” “Network and Internet” to enter the “Network and Sharing
Center”. Then, click “Manage network connections” (If you’re in “Category View”).

3

b) Right-click on “Local Area Connection”, and select “Properties”.

c) In the “General” tab, select “Internet Protocol Version 4 (TCP/IPv4)”, and select “Properties”.


e) Click “OK” to close the “Internet Protocol Version 4 (TCP/IPv4) Properties” dialog box. Then, click
“Close” to close the “Local Area Connection Properties” dialog box.

Step3: Double-click “ ” on your PC desktop to open Video Viewer. By defaults, the “Address
Book” panel will be displayed on the right side of the control panel.
Step4: Click “ ”
“
” to key in the default IP address, user name, password, and port
number of the device you intend to connect.
The default values are as follows:
Item
IP address
User name
Password
Port

Default Value
192.168.1.10
admin
admin
80

OR
Click “

”

“

” to search the available IP address(es) of other DVR(s) under

the same domain as your PC’s IP address. The found address(es) will be listed, and can
be added into the address book by clicking “

”.

Step5: Double-click the IP address you just added into the address book to log in.
4

2.3 Network Setting
Note: It’s recommended to have the qualified installer to plan and configure the
network setting.
Step1: Click “
” to show the “General setting and utilities” dialog box, and click “Remote
Config” twice to enter the setting page.

Step2: Select “Network” to make network settings based on your network environment.
There are three network connection types: Static IP, PPPOE, and DHCP.

Note: The device doesn’t support POE router or hub.
For Static IP:
a) Enter the information of “Server IP”, “Gateway” and “NetMask” obtained from your ISP (Internet
Service Provider).
b) Enter the port number. The valid number ranges from 1 to 9999. The default value is 80. Typically, the
TCP port used by HTTP is 80. However in some cases, it is better to change this port number for
added flexibility or security.
c) Click “Apply”, and click “OK” to exit the setting page.

For PPPOE:
a) Go to “Network” “DDNS”, and select “default” in the “System Name” drop-down list.
b) In “Hostname”, keep the default value, i.e. the MAC address of the device, or change the name to a
meaningful one. It’s easier to memorize.
c) Note down the whole address of the device, for example, MAC000E53114389.ddns.dvrtw.com.tw.

Note: If “default” is not available, please subscribe a DDNS account from a website
which provides free DDNS service. For details, please refer to “APPENDIX 2
SUBSCRIBING DDNS SERVICES” at page 39.

5

d) Go to “Network” and select “PPPOE”. Then, enter the user name and password subscribed from your
ISP.

e) Click “Apply”, and click “OK” to exit the setting page.

For DHCP:
a) Finish the DHCP router setting.
Get a router and connect it to the Internet via your PC (with Static IP or PPPoE setting). There are
different setting methods for different routers. Please refer to their respective user manuals.
b) Go to “Network” “DDNS”, and select “default” in the “System Name” drop-down list.
c) In “Hostname”, keep the default value, i.e. the MAC address of this device, or change the name to a
meaningful one. It’s easier to memorize.
d) Note down the whole address of the device, for example, MAC000E53114389.ddns.dvrtw.com.tw.

Note: If “default” is not available, please subscribe DDNS services from a website
which provides free DDNS service. For details, please refer to “APPENDIX 2
SUBSCRIBING DDNS SERVICES” at page 39.

e) Go to “Network” and select “DHCP”.

f)

Click “Apply”, and click “OK” to exit the setting page.

Step3: Disconnect your device and your PC, and connect them to Internet separately.
Step4: Add the IP address or host name of your device in “ ” of Video Viewer with correct user
name and password, and click it twice to see if you can access to your device.

6

2.4 Change the password
It’s recommended to change the default password for the first time usage in case of any
unauthorized access.
” to show the “General setting and utilities” dialog box, and click “Remote
Step1: Click “
Config” twice to enter the device setting page.
Step2: Click “General”
“Account”, and select the default account. Change the password
directly, and click “Apply”.

Step3: Return to the live view, and click

to disconnect the device.

Step4: Click
“
“ ” to select the IP address of the device, and click “
” to enter the
setting page and modify the password. Then, click “Login” to access the device with the
new password.

7

3. CONTROL PANEL OVERVIEW
3.1 Accessing the device
Step1: Double-click “ ” on your PC desktop to open Video Viewer. By defaults, the “Address
Book” panel will be displayed on the right side of the control panel.
Step2: Click “
it.

” to select the IP address of the device you intend to connect, and double-click

Step3: The live view is displayed in the Video Viewer.

3.2 Control panel overview
Two control panels are available and can be switched depending on your using habit.

3.2.1 Simplified Version (Default)

8

3.2.2 Full Function Version

3.2.3 Main Button Overview
Button
Simplified

Full Function

Function

Address Book

Description
Click to show the predefined IP address(es). You can add, remove or
search the IP address to log in the DVR remotely. For details, please
refer to “5. ADDRESS BOOK” at page 19.
Remote
Config
Record
Setting

Control

Log

Click to go to the record setting page for all
connected devices. For details, please refer to
“4.1 Record” at page 11.

Custom
Setting

Miscellaneous

Click to go to the detailed system configuration.
For details, please refer to “9. SYSTEM
CONFIGURATION” at page 28.

Click to choose the language of this program.
The language change will take effect when this
program is closed and executed again.

Click to view all event and recording logs, search the desired log(s) by
date, or playback the recording of the selected log. For details, please
refer to “7. STATUS LIST” at page 23.
Click to start / stop manual recording for all connected devices.

/

/

Record / Record
Stop

Snapshot

To enable / disable the manual recording function for a single device,
please refer to “5. ADDRESS BOOK” at page 19.
The record button will be disabled when the reserved disk capacity set in
“Record Setting” is larger than the current disk capacity. For details,
please refer to “4.1 Record” at page 11.
Click to take a snapshot for the current view. The snapshot pictures will
be saved in the path you specified in “Record Setting”. For details,
please refer to “4.1 Record” at page 11.

9

Button
Simplified

Full Function

Function

Description

Information

Click to show the current network connection details.

DVR Control

Click to open the DVR control panel for remote control. For details,
please refer to “8.1 DVR Control Panel” at page 25.

PTZ Control

Click to open the PTZ control panel to control the PTZ camera. For
details, please refer to “8.2 PTZ Control" at page 26.

10

4 FREQUENTLY-USED FUNCTIONS
4.1 Record
To record remotely, click “

” or “

” → “

” to go to the “Record Setting” page. For details, please refer to “6.

RECORD” at page 21.

In the “Record Setting” page, you can set the following items:
‧Record type
‧Pre- / post-event record time (0~10 seconds)
‧Record time setting
‧Record path
Note: The record function will be disabled when the reserved disk capacity in “Reserved(MB)” is
larger than the current disk capacity in “Free(MB)”.
When “Manual” is checked, click “

” or “

” on the main control panel to start manual recording immediately,

and all recordings will be saved in the location specified in “Record Path”.
When “Motion” and / or “Alarm” are checked, the recording function will be enabled for a motion or alarm event,
and all recordings will be saved in the location specified in “Record Path”.

4.2 Playback
To play a recording, click “

” or “

”, and select the “Record” tab. A list of all recordings will be shown by

defaults, and you can also sort out the logs you want to speed up the search time. For details, please refer to “7.
STATUS LIST” at page 23.

11

4.2.1 Playback Panel
Simplified Version

Full Function Version

Button

Click to pause the video playback.
Click to stop the video playback.

Rewind

Click once to get 2X fast rewind, twice to get 4X, three times to get 8X, and four
times to get 16X the highest.

Forward

Click once to get 2X fast forward, twice to get 4X, three times to get 8X, and
four times to get 16X the highest.

De-Interlace

--

Click to play the selected video clip.

Stop

--

Description

Pause

Full Function

Function
Play

Simplified

Select to reduce the vibration of the paused picture.

4.3 Full Screen Display
Click

or

to display images in the full screen mode.

To quickly control each device without returning to the original mode, right-click to display the translucent quick
menu bar similar as follows:

Button

/

/

/

/

Description

Return to normal display

/

Function

Click to return to the simplified version display or full function version
display.

Device Display Mode

Click to select the device display mode depending on how many devices
you’re connected.

DVR Control

(When the selected device is a DVR)
Click to show the DVR control panel. For details about each button, please
refer to “8.1 DVR Control Panel” at page 25.

PTZ Camera Control

(When the selected device is a PTZ camera)
Click to show the PTZ camera control panel. For details about each button,
please refer to “8.2 PTZ Control” at page 26.

12

4.4 Live Audio Volume Adjustment
Click and drag the slider

or

to adjust the live audio volume.

To mute the audio, click the speaker icon once to disable audio transmission; to restore the audio, click the icon again.
To hear the live audio from other audio channel(s) of the selected device when the selected device connects to more
than one audio camera, please refer to “8.1 DVR Control Panel” at page 25.

This function is available only when:
The selected device supports the audio function. For details, please refer to the user manual of the selected device.
“Video/Audio” is selected in the configuration page. For details, please refer to “5.2 Configuration Page for Device
Access” at page 20.

4.5 Network Backup (DVR Only)
Click “

” or “

click “

”, and select IP address of the DVR you want to make video backup in the address book. Then,

” or “

” to go into the “Backup” page, and you can select a specific time range or event to make a

video backup remotely.

Note: You need to be a supervisor to operate this function. For details, please refer to “9.1.2
Account” at page 29.
Function

Description

HDD Number / Channel

Specify the hard disk (HDD Number) and channel number (Channel) within which have the video data you need.

Download by Time

Specify the time range within which has the video data you want in the “Start Time” and “End Time” columns.

Download by Event

Select an event log from the event list. This list shows all logs in the specified DVR from the latest to the earliest.
‧To quickly find the events you need, check or uncheck the event type “System” / “Manual” / “Alarm” / “Timer” / “Motion”, and select
the log you want.
‧To view the earlier or later logs that are not shown in the current page, click “Prev. Page” or “Next Page”.
‧To refresh the event list, click “Reload”.

File Path

Assign the location where the backup files are saved.

Simultaneous Playback

To view the backup images simultaneously when the download process is in progress, select “Simultaneous Playback”.
You will see the backup images while the images are being downloaded to the PC or notebook.
To simply backup images without previewing, deselect “Simultaneous Playback”. You will only see a message box indicating the total
time needed, the current status and the saving location.

Download / Cancel

Click “Download” to start or “Cancel” to discard the video backup.

4.6 Firmware / OSD / Logo Upgrade
This function is used when users need to upgrade the selected device for function scalability. The available
upgrade items may vary based on the device connected.
13

Note: Before using this function, make sure you have the correct upgrade files provided by your
installer or distributor.
Step1: Click “
Step2: Click “

” or “

”, and select the IP address of your device in the address book.

” or “

” to show the upgrade page, “Update Server”.

Step3: Select the items you want to upgrade, and click “Add” to browse to the upgrade files.

Step4: Click “Upgrade Firmware” / “Upgrade OSD / “Upgrade Logo” to start upgrading.
Note: It takes a few minutes to finish the upgrade process. Do not disconnect the power during
firmware upgrade, or the upgrade may be failed. The selected device will reboot after the
upgrade.
Note: “Upgrade Logo” is a function to change the DVR welcome logo, and the acceptable graphic file
format is BMP. Use the image software (such as Photoshop) to set the image size to 320 * 240
pixels, save the image as an 8-bit (64-color) image in the "BMP" format, and make sure the
file size is not more than 128KB.
Step5: The selected device will reboot when the upgrade is successful. Wait till the device is rebooted and check if
the upgrade is really successful:
Firmware:

Click

or

to enter the system configuration page, and select “General” to check whether the

firmware version is upgraded.
Language: Click

or

to open the DVR control panel, and enter the DVR menu to select the language. For details,

please refer to the user manual of your DVR.
Logo:

When the DVR is rebooted, check if the welcome logo is replaced during the initialization stage.

4.7 E-Map
Video Viewer is also a Central Management System (CMS) software, which allows network device control &
management for up to 16 devices simultaneously.
Note: Before using this function, make sure Video Viewer is connected to all the devices (up to 16)
you want to monitor.
E-Map is ONLY available when the control panel is switch to the full function version.

How to Add an E-Map Group
STEP1: In the simplified version, click “

” to switch the control panel to the full function version, and click “

to enter the E-Map page as follows.
Note: To know where the buttons are, please refer to “3.2.1 Simplified Version (Default) at page 8,
and “3.2.2 Full Function Version” at page 9.
14

”

STEP2: Right-click to show the shortcut menu on the top-left panel, and select the E-Map group you want to add.
There are three E-Map groups you can add: Google E-MAP, Single E-MAP, and Building E-MAP.

15

STEP3: When the E-Map group is created, you will see the tree on the top-left panel, showing all the devices
you’ve added to this group.

Icon

Description
The connected device is camera. When it’s selected, it will become red.

The connected device is DVR. When it’s selected, it will become red.
For any motion or alarm event, it will appear on the screen to catch your attention.
To know what’s happening quickly, double-click the device icon on the E-Map to show the live view.

How to Edit / Remove an Existing E-Map Group
For Google E-Map Group
Right-click on the group name to show the shortcut menu list, and select
“Edit E-MAP” or “Remove E-MAP” as needed.
You can also add a single E-Map group (Add Single E-MAP) or Building
E-Map group (Add Building E-MAP) into the existing Google E-Map
group.

16

For Single E-Map Group
“Edit E-MAP” or “Remove E-MAP” as needed.

For Building E-Map Group
“Edit Building E-MAP” or “Remove E-MAP” as needed.

17

5. ADDRESS BOOK
5.1 Overview
Simplified Version

Full Function Version

Button
Full Function

Function

Description

Address Book

Simplified

Click to enter the address book panel.
Click to directly add one IP address for login. Key in the access
information needed, and click “Apply” and “Close”.

Add

For details about the configuration page, please refer to “5.2
Configuration Page for Device Access” at page 20.
Select one current IP address from the address list, and click this
button to modify the access information as needed.

Edit

For details about the configuration page, please refer to “5.2
Configuration Page for Device Access” at page 20.

Remove

Select one IP address from the address list, and click this button to
delete it.

Backup

Click to enter the “Backup” page for DVR video backup. For details,
please refer to “4.4 Live Audio Volume Adjustment” at page 13.

Update Server

Click to update the firmware / OSD / logo of the selected device. For
details, please refer to “4.6 Firmware / OSD / Logo Upgrade’ at page
13.
Check “REC” to enable manual recording of the selected device.

REC

REC

Manual Record On

To manage manual recording for all connected devices, please refer
to “6. RECORD” at page 21.

Search

Click to enter the search panel for available device searching.

Add into address book

Select from the available IP address list, and click this button to add
the selected address to the address book.

Setting

Select from the available IP address list, and click this button to edit
the setting.

19

Button
Full Function

Function

Description

Refresh

Simplified

Click to update the available IP address list.

5.2 Configuration Page for Device Access
This page should contain the correct information for accessing your device remotely.

Function

Description

Transfer Method

Select “TCP” or “UDP” based on your connection situation.

IP Address / Port / User name / Password

Enter the IP address / port number / user name / password for accessing the device you want.
For details about network settings, please refer to “2. NETWORK CONNECTION” at page 2.

Get Type

Click “Get Type” for this software to identify the type of your device, and make sure the
corresponding functions available for the device will operate normally in this software.

Stream Format

Select the codec “MPEG4”, “JPEG”, “H264” or “Default” for streaming. The available options may
vary based on the device you want to access.
Select “Video/Audio” or “Video” to ensure whether the web audio transmission is needed.

Av Option

When your device supports web audio transmission but “Video” is selected, no audio is transmitted.
When your device doesn’t support web audio transmission but “Video/Audio” is selected, no audio is
transmitted.

Comment

(Optional) Enter a description for this device.

Event Sound / Event Sound Duration

Check “Event Sound” to enable the event alert sound, and it’s available to change the default alert
sound.
Then, select how long the alert sound will last (3 ~ 60 seconds) in “Event Sound Duration”.

Apply / Login

Click “Apply” to save the setting and return to “Address Book” panel, or click “Login” to save the
setting and directly log into the device immediately.

Cancel

Click “Cancel” to discard the setting.

20

6. RECORD
6.1 Overview
To manage remote recording for all connected devices, click “

” or “

” → “

” to go to the “Record

Setting” page. The settings here will apply to all connected devices, and all recordings will save in the location
specified in “Record Path”.
Note: It’s recommended to specify the record path to the hard disk other than the boot hard disk to
protect your recording data.

Function

Description
Check to enable Manual / Schedule / Motion / Alarm recording.
For manual recording, the recording starts when “REC” is selected in “Address Book”, and
or
is selected in the
main control panel. For details, please refer to “5.1 Overview” at page 19, and “3.2 Control panel overview” at page 8.

Record On/Off

For schedule recording, the recording starts during the time specified in “Record Time Range”.
For motion & alarm recording, the recording starts when the connected device has detected motion or alarm events
during the time specified in “Record Time Range”.

Prev/Post Event Record Time

Click and drag the slider to set the record time in 0~10 seconds before (Prev.) / after (Post) a motion or alarm
event.
This function helps to capture full evidences for a motion or alarm event.

Hard Disk Overwrite

Check this option, and the hard disk will start to overwrite from the oldest data when the available capacity of
the specified record path is full.

Record Time Range

Set the record time for schedule, alarm or motion recording by week or by time. For details, please refer to “6.2
Record Time Range” at page 21.

Record Path

Select the hard disk in which you want to save all recordings and snapshots. For details, please refer to “6.3
Record Path” at page 22.

6.2 Record Time Range
6.2.1 Weekly
Click “Weekly” tab, and you will see a weekly time table indicating the week days (Mon ~ Sun) and hours (0
~ 24), similar to the figure below:

X axis:

0 ~ 24 hours. Each time interval within a square is 15 minutes.

Y axis:

Monday ~ Sunday.
21

Operation: You can set the record schedule for 3 record types as needed in this time table:
The 1st timeline – Schedule l recording, indicated in yellow,
The 2nd timeline -- Alarm recording, indicated in magenta, and
The 3rd timeline -- Motion recording, indicated in cyan.

Click and hold the start time point, and drag to the end time point to set the record time range.

6.2.2 Custom
Click “Custom” tab, and you can set a more specific record time range for the 3 record types: Schedule,
Motion, and Alarm.

How to add a new time setting
Step1: Check the record type you want to schedule the recording.
Step2: Set the start time (From) and end time (To).
Step3: Click “Add” to add the time range you just set into the schedule table. Before adding the time range, you
will be prompted to confirm as follow:

Step4: Check if the information shown is correct. Click “OK” if the information is correct. Click “Cancel” if the
information is wrong.

How to modify / delete a current time setting
Step1: Select the schedule setting you want to modify from the schedule table. The setting will be displayed in the
left panel.
Step2: To modify the setting, click “Update”; to delete the setting, click “Delete”.
Step3: If the setting is modified, you will be prompted to confirm the setting. Click “OK” if the information is correct.
Click “Cancel” if the information is wrong.

6.3 Record Path
Check and select the location for saving all recordings and snapshot pictures.

Function

Description

Drive

It lists all the hard disks in your PC. Select the hard disk in which you want to save all recordings and snapshot pictures. It’s
recommended to save them to the hard disk other than the boot hard disk to protect your recording data.

Total(MB)

It shows the total capacity of the hard disk.

Free(MB)

It shows the remaining capacity of the hard disk.

Reserve(MB)

It shows the minimum reserved disk capacity for saving all recordings and snapshot pictures. This value can be changed
based on your current situation. To change the value, click and modify as needed.
The record function will be disabled when the reserved disk capacity in “Reserve(MB)” is larger than the current disk capacity in
“Free(MB)”.

Video Path

It shows the location where all recordings are saved. To change the location, click it twice and browse to the location you want.

Picture Path

It shows the location where all snapshot pictures are saved. To change the location, click it twice and browse to the location
you want.

22

7. STATUS LIST
7.1 Overview
Click “

” to check all logs, or search for specific log(s) by date and / or record type for all devices.

There are three log types: Record, Backup and Event. To playback a video clip for a specific record or backup log,
select the log, and double-click it to start video playback.

Function

Description

Time Range

Select the time range for log searching. For details, please refer to “7.2.1 Time Range” at page 23.

Record Type

Select the specific record type(s) for log searching. This section is available only in the “Record” list. For details,
please refer to “7.2.2 Record Type” at page 24.

Record / Backup / Event

It lists all the record / backup / event logs or the specified logs after log searching. For details, please refer to
“7.2.3 Log List” at page 24.

Query

Click to refresh the current log list after the searching criteria are set.

7.2 Log Searching
To quickly search the logs you want in the current log list, you need to set the criteria first by time and / or record
type.

7.2.1 Time Range

Function

Description

Range Unit

Select the time search range by “One Week” or “One Day”.

Start Time

Set the start time for time search. The end time will automatically switch to the date after one week or one day from the
start time based on your selection in “Range Unit”.

23

7.2.2 Record Type
There are four record types: User / Motion / Alarm / RETR. Check the record type you want to search.
Note: This section is available only when the “Record” tab is selected.

Function

Description

User

Check this and all logs for manual recording will show. The log is generated when this function is enabled in “Address
Book”, and
or
is selected in the main control panel.

Motion

Check this and all logs for motion recording will show. The log is generated When the connected device has detected a
motion event during the time specified in “Record Setting”.

Alarm

Check this and all logs for motion recording will show. The log is generated When the connected device supports the
alarm function and has detected an alarm event during the time specified in “Record Setting”.

RETR

Check this and all logs for RETR recording will show. The log is generated when the connected device supports the
R.E.T.R. function and this function is enabled in “8.1 DVR Control Panel”.

7.2.3 Log List
There are three log lists: Record, Backup & Event. By defaults, the log lists show all the logs. To quickly
search the logs you want, you can narrow down the list by time and / or record type.

Function

Description

Reserve

Select the log which is considered important and can’t be removed, and click it to prevent accidental removal.

Play

Click it to know what’s recorded for the selected log.

Repair

Select the log with “Error” checked, and click it to try to fix the file.

Delete / Delete All

Select a specific log you don’t need or all logs, and click “Delete” or “Delete All” to remove.
The log with “Reserve” checked will not be removed even when it’s selected to be removed.

24

8. DVR / PTZ CONTROL
8.1 DVR Control Panel
When the selected device is a DVR, click
or
to show the DVR control panel for remote control. For the
function of each button, please refer to the following description.
Note: The control panel below is taking a 16CH DVR model as an example and for reference only.
Some buttons may not be enabled or appeared for selected models.

Function

Button
Simplified

Full Function

Remote
Independent
Mode

Description
Click to activate / deactivate the network independent function.
When this function is on, this button and the channel number buttons will turn to
blue, and you can switch to any channel of the selected device you want to see
without changing the channel display mode on the local site.
To exit the remote independent mode, click this button again.

Channel

1~16 / 1~8 / 1~4

1~16 / 1~8 / 1~4

Click the channel number to switch to the live view of the selected channel.

Number
Enter

Click to confirm the setting or enter your selection.

Menu
Arrow Keys

Click to enter the DVR OSD menu.
/

/

Click to:

/
/

/

/

1. Move the highlight up / down / left / right.
2. Make selection.

Event Search

Click to get access to the time & event search mode of the selected device.

R.E.T.R

Click to activate the R.E.T.R. function.

Audio Channel
Selection

/

/

Click to switch to the audio channel you want. The selected channel is shown as
green.
To know whether your device supports the audio function, please refer to the user manual
of your device.
To adjust the live audio volume, please refer to “4.4 Live Audio Volume Adjustment” at
page 13.

R.E.T.R. Audio

/

/

When the R.E.T.R. function is selected and activated, the R.E.T.R. audio function
will be on, too. If you don’t want to activate this function, click the red icon again to
disable this function.

Video Channel
Selection

Click to display CH1, CH2, CH5 and CH6.
Click to display the 1st channel of the selected 4-cut view mode.
Click to display the 2nd channel of the selected 4-cut view mode.
Click to display the 3rd channel of the selected 4-cut view mode.

25

Button

Function

Simplified

Full Function

Description
Click to display the 4th channel of the selected 4-cut view mode.

/

/
/

/

/
/

Click to switch to the 4-cut / 9-cut / 16-cut display.
You can also click these two buttons to go to the previous / next channel of the
selected device.

Digital Zoom

Press to zoom in / out the selected channel image.

Full Sequence

Press to display each channel of the selected device one by one, starting from
CH1. When the last channel is displayed, it will start from CH1 again.
To exit from this display mode, press any channel display mode.

Quad Sequence

Quad Sequence
Click to display the 4 quad display modes one by one.
The 1st display is CH1, CH2, CH5 & CH6,
the 2nd display is CH3, CH4, CH7 & CH8,
the 3rd display is CH9, CH10, CH13 & CH14, and
the 4th display is CH11, CH12, CH15 & CH16.
When the 4th display is shown, it will start from the 1st display again.
To exit from this display mode, click any other channel display button.

Search

Press to enter the full search menu of the selected device.
You can check all the logs here, and select one of them to payback.

Key Lock

Click to enable the key lock function for the selected device. To unlock the device,
key in the password, and press

or

.

Playback Operation
Play

Press to play the latest recorded video clip.

Stop

Press to stop the video playback.

Pause

Press to pause the video playback.
Click to forward the video playback.

Forward

Click once to speed up the forward by 4 times, and press twice by 8 times, etc.
The maximum speed is 32 times.
Click to rewind the video playback.

Rewind

Click once to speed up the rewind by 4 times, and press twice by 8 times, etc. The
maximum speed is 32 times.
Click once to slow down the video playback by 1/4 time, and press twice by 1/8
time.

Slow

8.2 PTZ Control
If a PTZ camera is connected and you want to control it:
1) Click
or

or

to show the DVR control panel, and switch to the channel which connects the PTZ camera.

will be available on the main control panel.

OR
2) Click

or

on the main control panel when the PTZ camera is also a network camera.

26

Click

or

Function
Preset 1~16

to display the PTZ control panel as follows.

Button
Simplified
Full Function
1~16

Description

1~16

Click to move the PTZ camera to the selected preset point.
Click to activate the auto function.
Before using it, you need to assign a specific function that will be
enabled when “AUTO” is clicked. For details, please refer to the user
manual of the PTZ camera.

Auto Pan

Click to activate the auto tracking function if the connected PTZ
camera supports it and have set the surveillance area.

Auto Tracking
Zoom In / Out

/

/

Click to zoom in / out the image.

Focus Near / Far

/

/

Click to adjust the focus of the image.

Max Zoom In / Out

/

/

Click to zoom in the image to the largest / zoom out the image to its
original size.

--

Click to:
1. Move the camera lens up / up-left / down / up-right / left /
down-right / right / down-left.
2. Make selection.

Arrow Keys

--

Speed up the menu selection from 1 to 10.
Ex: If the value of the turbo step is set to 5, one mouse-click will
function as 5 mouse-clicks when you click the arrow keys.

Turbo Step

To use this function, you need to set it in the camera configuration
page first.
Click to enable the auto move function. It allows the camera to move
to the direction where your cursor stays.

Auto Move

27

9. SYSTEM CONFIGURATION
To change the system settings of the connected device, select the device you want, and click “
or

→ “

”

” to enter the system configuration page. All the system configurations are listed as a

tree structure on the left panel as follows.
The screen captures and tree structure displayed in this chapter are taking a 16CH DVR as an
example and for reference only. Some functions may not be available for selected models.
For description about system configurations of a network camera, please refer to its own user
manual.
Note: It’s recommended to consult with your installer before changing system
configurations.
Note: You need to be the supervisor to enter the system configuration page. If not,
please re-log into the selected device with the supervisor user level.
Main Menu

Sub-menu

General

What you can do for this function?
1. Check the firmware version & MAC address of the connected device.
2. Change the displayed name of the device.

Log

Check the system event logs of the selected device.

Account

1. Create a new user account with different access privilege.
2. Modify or delete an existing user account.

OnLineUser

Check the current online user(s).

Network

Configure network settings.
DDNS

Enter DDNS information when the network type is PPPOE or DHCP.

SNTP

Synchronize your device time with the networked computer systems.

FTP

Enter the FTP information for event notifications when “FTP” is chosen in “General” →
“DVR” → “Alert”.

MAIL

Enter Email information for event notifications when “Email” is chosen in “General” → “DVR”
→ “Alert”.

Video

Set the image resolution, quality and frame rate.

DVR

Set daylight saving time and the current time.
Camera

Rename the camera title, adjust the color performance, and enable the record function for a
specific channel.

Device

Set for the PTZ camera connected to your DVR and allows the DVR to control it properly.

Detection

1. Enable / disable the alarm or motion detection.
2. Set the motion detection area.
3. Select the event notification method.

Record

Set the record function.

Record Timer

Set the record timer and motion detection timer.

Alert

Set the DVR to beep to notify of an alert event.

Display

Choose whether to display some text indication or icons and set the DVR time remotely.

28

9.1 General
You can check the general information of the selected device, such as the firmware version and MAC
address, and also modify the identification name of the device (up to 15 alphanumeric characters).

9.1.1 Log
To quickly search the system log you want by event type, click the drop-down list to select the
system log type you want to check, and click “Reload” to refresh the list.
To clear all system event logs, click “Clear”.

9.1.2 Account
You can create a new account with different user access privilege, or delete or modify an
existing account setting.

How to create a new account
Step1: Click “New”, and fill in the following columns.

29

Column

Description

User Name

Set a user name that will be used for device access. The user name allows up to 16 alphanumeric characters.

Password

Set the password that will be used for remote login. The password allows up to 16 alphanumeric characters.

User Level

Set the security level of an account to give the permission to control different functions. There are four user
levels: Supervisor, Power User, Normal User and Guest.

Life Time

Select how long this account is allowed to stay online (1 MIN / 5 MIN / 10 MIN / 1 HOUR / 1 DAY / INFINITE)

Step2: Then, click “Apply” to save your setting and create a new account.

How to modify or delete an existing account
Step1: Select the account you want to modify or delete.
Step2: To modify the account, change the setting directly, and click “Apply”.
To remove the account, click “Delete”.
Note: It’s not allowed to remove an account when there’s only one account in the
account list.

30

9.1.3 OnLineUser
You can check the current online user(s) with respective online information. To refresh the list,
click “Refresh”.

9.2 Network
You can set the network configuration of the connected device depending on your network type. For
details, please refer to “2. NETWORK CONNECTION” at page 2.

9.2.1 DDNS
Select “On” when the selected network type in “Network” is “PPPOE” or “DHCP”. For details,
please refer to “2. NETWORK CONNECTION” at page 2.

31

9.2.2 SNTP
SNTP (Simple Network Time Protocol) is used to synchronize your device time with the
networked computer systems.

Function

Description

GMT (Greenwich Mean Time)

Once users choose the time zone, the device will adjust the local area time of the
system automatically.

Server Name

Simply use the default SNTP server (For example, tock.stdtime.gov.tw) or change to
another server with which users are familiar.

Sync. Period

Select “Daily” to synchronize the device time with the network time every day or
“None” to turn off this function.

Sync Server Time

Click and the device will synchronize the time with the network time.

9.2.3 FTP
Enter the detailed FTP information and click “Apply” to confirm. The information you set here
will be applied when “FTP” is selected in “Dvr” → "Alert".

9.2.4 MAIL
Enter the detailed E-mail information and click “Apply” to confirm. The information you set here
will be applied when “Email” is selected in “Dvr” → "Alert".

32

Function

Description

Server

Enter the SMTP server address provided from your e-mail system supplier.

Mail From

Enter the entire mail address to ensure E-mails will not be blocked by SMTP.

Verify Password

Some mail servers are required to verify the password. Please enter the “user name” and
“password”.

Email Address

Add the E-mail address(s) of the assigned recipient(s).

9.3 Video
You can set the image resolution, quality and frame rate here.
Note: The options displayed here may vary based on the device you selected.

Item

Description

Image Type

Select the image resolution (CIF / 4CIF) and quality (SUPER BEST / BEST / HIGH / NORMAL /
BASIC) here.

(JPEG / MPEG / H264)
Frame Rate

The frame rate allowed to each viewer can be adjusted to adapt to the bandwidth on the network.
Set the desired image frequency to the maximum (FULL) or to a specified frame rate (1/2; 1/3; 1/4;
1/5; 1/10; 1/15; 1/20; 1/25; 1/30).
The actual frame rate depends on the actual network connection, and may be lower than the specified
one.

9.4 DVR
You can set DVR general functions, such as the host ID, daylight saving and key lock timeout.

Function

Description

Host ID

Set the host ID from 0 to 254. The default value is 0.

System Type

It displays the current system type (NTSC / PAL). It’s automatically detected.

De-interlace

Choose to reduce (ON) or ignore (OFF) the vibration of the paused picture.

Daylight Saving

Specify whether to use daylight saving time (ON / OFF).

33

Function

Description

Host ID

Set the host ID from 0 to 254. The default value is 0.
If this function is enabled, set the time period (START / END), and adjust the daylight saving time in hours
(ADJUST).

Menu Operation

Select the time-out in seconds after which the DVR keys will be automatically locked when no one is
operating the DVR for a period of time (0 / 30 / 60 / 120). The default value is 30.

Serial Type

It displays the serial type (RS485) used by this DVR. It’s automatically detected.

Baud Rate

Choose a baud rate used by this DVR from the drop-down list (2400 / 9600 / 19200 / 38400 / 57600 /
115200). The default value is 2400.

9.4.1 Camera
You can set camera-related setting here.

Function

Description

Title

Change the default camera naming here. The default title is the channel number.
Click to select the channel title and directly assign a new name to the camera up to six
alphanumeric characters.

Brightness / Contrast /
Hue / Saturation

You can adjust the brightness/contrast/saturation/hue of each channel here. The value
is adjustable from 0 to 255.

Covert

Select if you want to mask the selected channel under recording. When this function is
activated, the wording “COV.” will be shown on the channel screen.

Record

Select if you want to enable recording for the selected channel. When this function is
activated, the symbol “ ” will be shown on the channel screen.

9.4.2 Device
It’s necessary to go to this setting page when the selected channel is connected to a PTZ
camera. The values set here must be the same as the values set in the PTZ camera for
the DVR to control it properly.
For details, please refer to the user manual of your PTZ camera.

34

Function

Description

DEVICE

Choose “PTZ” when the connected camera is “PTZ”.

ID

Set the ID number (0 ~ 255) of the connected PTZ camera.

PROTOCOL

Choose “NORMAL”, “P-D” or “P-P” protocol. Please choose “NORMAL” if it’s our brand’s
PTZ camera.

RATE

Set the baud rate of the camera (2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200).

9.4.3 Detection
Select the desired channel, and click “Edit” or double click the item to enter the motion
detection sensitivity and area-setting page.

Function

Description

DETECT

Enable (ON) or disable (OFF) the function of “Motion Detection”.
If this function is enabled, you might need to set the motion detection sensitivity or simply
keep the default values. For details, please see the description below.

Motion Detection
Sensitivity
(LS / SS / TS / RE)

Set the detection sensitivity in 4 different adjustable parameters (LS / SS / TS / RE). For
details about each parameter, please refer to the user manual of your DVR.

Alarm

Select N.C. (normal closed) / N.O. (normal opened) / OFF for the alarm polarity. For N.C.
/ N.O. contact details, please refer to the pin configuration description in the user manual
of your DVR.

Motion Detection
Setting Area

Set the motion detection area by selecting the area grids with your mouse. Pink grids
represent the area that is not being detected while the transparent grids are the area
under detection. You can set multiple areas under detection.
Click “－” (Clear All) to set the whole area undetected.
Click “＋” (Select All) to set the whole area under detection.

Apply / Return

To save the setting, click “Apply” and return to “Server Setting” window.
To discard the setting, click “Return” to directly return to “Server Setting” window without
saving.

9.4.4 Record
You can select the recording settings of your DVR.
Note: The options displayed here may vary based on the device you selected.

35

Function

Description

Image Size / Quality

Choose the image size and quality.

Manual Record / Event Record /
Timer Record

Select the record type that the DVR will take recording (Yes / No), and select the
IPS setting for the selected record type.

Pre-Alarm Record

Check this option if you want to enable the pre-alarm recording function.
When any alarm is triggered, the DVR will record 8MB video data before the
alarm event actually happened.

Overwrite

Select “Yes” to enable the HDD overwrite function when the HDD is full, or “No” to
disable this function.
When this function is on, and the recording and the pre-alarm function are
activated, the DVR will overwrite 8GB data from the oldest for continuous
recording without notice.

9.4.5 Record Timer
You can set the record schedule for normal recording or motion recording.

Function

Description

Permit

Select this checkbox to allow the record timer setting to be applied to the connected DVR. If
this checkbox is deselected, the setting will not be applied to the connected DVR even when
you click “Apply” and “OK”.

Routine / Motion

Click “Routine” tab to select the time range for continuous recording, or “Motion” tab to select
the time range within which the recording will be on when any movement is detected.

Time Table

Find the day and time you want to enable the recording. Then, click to select the time
interval(s). Each interval represents 30 minutes.
To enable the recording all the time, click “＋”; to clear the record timer setting, click “－”.

9.4.6 Alert
You can set the DVR to beep to notify of an event. Check the buzzer option you want,
and set how long the beep sound will be lasted.

36

Function

Description

Ext Alert

Check this option to enable the external alert.

Buzzer Enabled

This option must be checked for “Motion Buzzer”, “Alarm Buzzer”, “Video Loss
Buzzer”, and “Key Input Buzzer” to take effects.

Motion Buzzer / Alarm Buzzer /
Video Loss Buzzer / Key Input
buzzer

Check one of these 4 options, and you will hear the beep sound when any
movement is detected / the alarm is triggered / video loss occurs / any DVR
key is pressed.

Notified by

Select the notification method when any event occurs: Email or FTP.

Duration

Set the alert and buzzers to beep for 5 / 10 / 20 / 40 seconds.

9.4.7 Display
You can choose whether to display some text indication or icons, set the channel display
switch time-out, set the DVR time remotely, and select the date format (Y-M-D / M-D-Y /
D-M-Y).

Function

Description

Title

Select to display the channel title in the live view.

Event

Select to display the event symbol in the live view.

Quick Status

Select to display the quick status in the live view.

Full Sequence Duration /
Quad Sequence Duration

Set the time-out in seconds (3 / 5 / 10 / 15) after which the channel
display will be switched by one channel (Full Sequence Duration) or by
four channels (Quad Sequence Duration).
Note: “Quad Sequence Duration” is disabled for the 4CH DVR model.

Server Time

Set the DVR time remotely.

Date Format

Choose the date display format appropriate to your location (Y-M-D,
M-D-Y and D-M-Y).

37

APPENDIX 1 SPECIFICATIONS
▓ SYSTEM REQUIREMENTS
Operation System

Microsoft® Windows® 2000(SP4), XP or Vista

CPU

Intel® Pentium® 4 3GHZ or compatible above

RAM

512MB (recommended minimum), 1GB above better

▓ CENTRAL MONITORING
Display Mode

1CH / 4CH / 6CH / 9CH / 16CH Selectable

Display Mode Setting

Adjustable Sequence & Channel Display Position

Max. Channel No.

16

Remote DVR/PTZ Camera Control

YES

Real-Time Audio Monitoring

YES

Security Level

Guest / Normal / Power User / Supervisor

Password Inquiry

YES

Transmitting Format

H264 / MPEG4 / JPEG (based on the device connected)

▓ EVENT MANAGEMENT
Motion / Alarm Detection

YES

Advanced Motion Detection Setting

Adjustable Sensitivity & Detection Area

Motion / Alarm Notification

By Email or FTP

Event Log List

YES

▓ RECORDING & PLAYBACK
Record Mode

Manual / Schedule / Motion / Alarm / R.E.T.R.

Recording Setting

Independent Setting Per Channel

Online / Offline Playback

YES

▓ OTHERS
Channel Naming

YES

Remote Backup

YES

Pre-/Post- Alarm Recording

Max. 10 Seconds

E-Map

Single E-Map and Building E-Map (in BMP or JPEG format) /
Google E-Map

* The specifications are subject to change without notice.

38

APPENDIX 2 SUBSCRIBING DDNS SERVICES
For PPPOE or DHCP, you should enter the host name which points to the IP address of your device
for login first. Besides using the default DDNS service, you can also apply for new DDNS services.
There are many websites for free DDNS service application, and below shows an example of DDNS
account application from the website http://www.dyndns.com.
Step1: Go to http://www.dyndns.com, and click “Create Account” to sign up a DDNS account.

Step2: Enter all the information necessary for signing up an account according to the website
instructions.
‧Key in a user name for login, for example, headoffice523.
‧Set the password and input it again to confirm.
‧Key in your E-mail address and input it again to confirm.
Then, click “Create Account”.

Step3: The system will automatically send a confirmation email to your email account. Please read
this email within 48 hours and complete the procedure to activate your account according to
the instructions in the email.
When the account is confirmed, you will see “Account Confirmed”. Your account is created
successfully now.

39

Step4: Click “login”, and enter the user name and password you preset before to log in.
Step5: Click “Add Host Services”.

‧Input a meaningful host name.
‧Choose a host name.
‧Enter the IP address you want to redirect.

Note down the whole host name, for example, headoffice523.dyndns.org. Then, click “Add To
Cart” for billing.

Note: This service is free. Just finish the billing process, and NO paying information
is required.
Step6: Click “Activate Services” after checkout, and you’re ready to use DDNS services now.

Step7: Return to Video Viewer, and go to “Network”

“DDNS”.

‧Select “On” for DDNS.
‧Select the system name you set when subscribing the DDNS service from the drop-down list, for
example, dyndns.
‧Enter the user name & password you used to log into the DDNS service.
‧Enter the host name you set when subscribing the DDNS service, for example, headoffice523.

40

Manual cms ( central management system ) / Video Viewer for AVTECH DVR

More Related Content

Viewers also liked (13)

Similar to Manual cms ( central management system ) / Video Viewer for AVTECH DVR (20)

More from Firman Indrianto (10)

Recently uploaded (20)

Manual cms ( central management system ) / Video Viewer for AVTECH DVR