Manual Handling By J Mc Cann
Download as PPT, PDF1 like3,094 views
This document provides guidance on manual handling best practices to reduce injuries. It explains that over a third of reported workplace injuries each year are due to manual handling. Common injuries include back injuries but also hands, arms and feet. Employers should avoid hazardous manual handling where possible, assess any risks, and take steps to reduce risks such as using lifting aids or changing loads. The document offers tips for proper lifting technique and highlights signs that indicate handling needs improvement.
Manual Handling By J Mc Cann
- 1. MANUAL HANDLING By Jim McCann
- 2. Getting to grips with manual handling. This slide show explains the problems associated with manual handling and sets out best practice
- 3. The general principles are relevant to all organisations whatever their size. It makes sound business sense to have good health and safety practices.
- 4. The transporting or supporting of loads by hand or by bodily force i.e. Lifting, pushing and pulling
- 5. More than a third of all over-three-day injuries reported each year to HSE and local authorities are caused by manual handling
- 6. Most of the reported accidents cause back injury, Hands, arms and feet are also vulnerable.
- 8. In 1995, an estimated average of 11 working days per sufferer were lost through musculoskeletal disorders affecting the back, caused by work. HSE estimated that such conditions cost employers up to £335 million (1995/96 prices).
- 9. Many manual handling injuries build up over a period rather than being caused by a single handling incident These injuries occur wherever people are at work - Farms Building sites, Factories, Offices, Warehouses, Hospitals, Banks, Laboratories, While making deliveries In simple terms anywhere
- 10. Consider the risks from manual handling to the health and safety of your employees The rest of this slide show will help. If there are risks, the Manual Handling Operations Regulations 1992 apply.
- 11. AVOID the need for hazardous manual handling, as far as is reasonably practicable ASSESS the risk of injury from any hazardous manual handling that can’t be avoided; and REDUCE the risk of injury from hazardous manual handling, as far as is reasonably practicable
- 13. Consider automation, particularly for new processes. Think about mechanisation e.g. the use of a lift truck. Beware of new hazards from automation or mechanisation .
- 15. They should: Follow appropriate systems of work laid down for their safety; Make proper use of equipment provided for their safety; Co-operate with their employer on health and safety matters; Inform the employer if they identify hazardous handling activities; Take care to ensure that their activities do not put others at risk.
- 16. Check whether you need to move it at all. For example: Can wrapping or machining be done without moving the materials? Can you take the treatment to the patient, not vice versa?
- 17. Who should make the assessment?
- 18. You should be able to do most assessments in-house; you know your business better than anyone. Most will require just a few minutes’ observation to identify ways to make the activity easier and less risky, i.e. less physically demanding. Advice from outside experts may be helpful in difficult or unusual cases,
- 19. Your employees can help you carry out the assessment - they often know what problems there are and how best to solve them. If their work is varied or not closely supervised, make sure they are aware what risks to look for when manual handling, and what to do about them. But the final responsibility for assessments rests with employers.
- 20. No, except where it would not be easy to repeat the assessment. In such cases the significant findings should be recorded and kept.
- 21. No. It’s quite acceptable to do a generic assessment that is common to several employees or to more than one site or type of work.
- 22. The important thing is to identify the risk of injury and point the way to practical improvements .
- 23. Don’t just forget it or file it away. The purpose of the assessment is to pinpoint the worst features of the work - and they’re the ones you should try to improve first.
- 24. Update the assessment when significant changes are made to the workplace.
- 25. To the lowest level ‘reasonably practicable’. That means reducing the risk until the cost of any further precautions - in time, trouble or money - would be far too great in proportion to the benefits.
- 27. It depends whether it’s reasonably practicable to do so. If the risks identified in your risk assessment can be reduced or eliminated reasonably by means of mechanical aids, then you should provide them. But you should always consider mechanical aids - they can improve productivity as well as safety. Even something as simple as a sack truck can make a big improvement.
- 28. A simple sack truck can make a big improvement.
- 29. The tasks, do they involve: Holding loads away from the body trunk? Twisting, stooping or reaching upwards? Large vertical movement? Long carrying distances? Strenuous pushing or pulling? Unpredictable movement of loads? Repetitive handling? Insufficient rest or recovery time? A work rate imposed by a process?
- 30. Is the load:- Heavy, bulky or unwieldy? Difficult to grasp? Unstable or unpredictable? Intrinsically harmful, e.g. sharp or hot? The load
- 31. Constraints on posture? Poor floors? Variations in levels? Hot/cold/humid conditions? Strong air movements? Poor lighting conditions? Restrictions on movement or posture from clothes or personal protective equipment? The working environment, are there:
- 32. Require unusual capability? Endanger those with a health problem? Endanger pregnant women? Call for special information or training? Individual capacity, does the job:
- 33. Can you: Improve workplace layout to improve efficiency? Reduce the amount of twisting and stooping? Avoid lifting from floor level or above shoulder height? Reduce carrying distances? Avoid repetitive handling? Vary the work, allowing one set of muscles to rest while another is used?
- 34. Lighter or less bulky? Easier to grasp? More stable? Less damaging to hold? Have you asked your suppliers to help?
- 35. Remove obstructions to free movement? Provide better flooring? Avoid steps and steep ramps? Prevent extremes of hot and cold? Improve lighting? Consider less restrictive clothing or personal protective equipment?
- 36. Take better care of those who have a physical weakness or are pregnant? Give your employees more information, e.g. about the range of tasks they are likely to face? Provide training?
- 37. A lack of mechanical aids; Unsuitable loads; Bad working conditions.
- 38. How to recognise harmful manual handling; Appropriate systems of work; Use of mechanical aids; Good handling technique
- 43. Adopt a good posture When lifting from a low level, bend the knees. But do not kneel or over flex the knees. Keep the back straight, maintaining its natural curve (tucking in the chin helps). Lean forward a little over the load if necessary to get a good grip. Keep the shoulders level and facing in the same direction as the hips. Get a .firm grip Try to keep the arms within the boundary formed by the legs. The best position and type of grip depends on the circumstances and individual preference; but must be secure. A hook grip is less tiring than keeping the fingers straight. If you need to vary the grip as the lift proceeds, do it as smoothly as possible.
- 44. It’s a matter of judgment in each case, but there are certain things to look out for, such as People puffing and sweating, Excessive fatigue, bad posture, Cramped work areas, Awkward or heavy loads History of back troubles. Operators can often highlight which activities are unpopular, difficult or arduous.
- 45. There is no such thing as a completely ‘safe’ manual handling operation. It’s difficult to be precise: so many factors vary between;- Jobs, Workplaces And people. The general risk assessment guidelines filter should help to identify when a more detailed risk assessment is necessary. Working within the guidelines will reduce the need for a more detailed risk assessment.
- 47. Produced by J.McCann For more information HSE Information Services, Caerphilly Business Park, Caerphilly CF83 3GG. You can also visit HSE’s website: www.hse.gov.uk