Microprocessor 8085 Architecture with functional block diagram.pptx
- 1. ARCHITECTURE OF 8085 MICROPROCESSOR Dr.R.Hepzi Pramila Devamani, Assistant Professor of Physics, V.V.Vanniaperumal College for Women, Virudhunagar.
- 2. Architecture 0f 8085 Architecture of 8085
- 3. Architecture 0f 8085 1. ALU 2. Timing and Control Unit 3. General Purpose Registers 4. Program Status word 5. Program Counter 6. Stack Pointer 7. Instruction Register and Decoder 8. Interrupt Control 9.Serial I/O Control 10.Address Bus 11. Data Bus
- 4. PROGRAMMING MODEL OF 8085
- 5. REGISTERS The Registers are of 8-bit & 16-bit size used for different purposes A- Accumulator – This is an special purpose register. All the ALU operations are performed with reference to the contents of Accumulator. B,C,D,E,H,L – General purpose registers. These registers can also used for 16-bit operations in pairs. The default pairs are BC, DE & HL.
- 6. F – Flag register – This register indicates the status of the ALU operation. PC – Program Counter – This is a 16-bit register used to address the memory location from where an instruction is going to be executed.
- 7. SP – Stack pointer - This is a 16-bit register used to address the top of the stack memory location. Temporary register, W & Z – These registers are only used by 8085 and are not available for the programmer.
- 8. ALU – Arithmetic & Logic Unit ALU of 8085 performs 8-bit arithmetic & logical operations. The operations are generally performed with Accumulator as one of the operands. The result is saved in accumulator register. Timing & Control Unit This unit works as the brain of the CPU and generates all the timing and control signals to perform all the internal & external operations of the CPU. Instruction Decoder & Machine Cycle Encoder Unit This unit decodes the op-code stored in the Instruction Register (IR) and encodes it for the timing & control unit to perform the execution of the instruction.
- 9. THANK YOU