Microsoft India - Windows Server 2008 R2 Remote Desktop Services Whitepaper

Technical Overview of Windows Server® 2008 R2
Remote Desktop Services
Microsoft Corporation
Published: May 2009

Abstract

Windows Server® 2008 R2 Remote Desktop Services (RDS) enables organizations of all sizes to provide
user access to Windows®-based applications and desktops stored on a remote computer over a
network. With RDS, only the user interface (UI) of an application or remote desktop is presented on the
client computer. Any input to it is redirected over the network to the RDS server back end, where all
processing occurs.

This technical white paper discusses the features, benefits, and usage scenarios for RDS and is intended
for server administrators who are already familiar with RDS as well as those server administrators who
want to learn more about Microsoft’s desktop and presentation virtualization technologies.

Disclaimer

The information contained in this document represents the current view of Microsoft Corporation on
the issues discussed as of the date of publication. Because Microsoft must respond to changing market
conditions, it should not be interpreted to be a commitment on the part of Microsoft, and Microsoft
cannot guarantee the accuracy of any information presented after the date of publication.

This White Paper is for informational purposes only. MICROSOFT MAKES NO WARRANTIES, EXPRESS,
IMPLIED OR STATUTORY, AS TO THE INFORMATION IN THIS DOCUMENT.

Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights
under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval
system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or
otherwise), or for any purpose, without the express written permission of Microsoft Corporation.

Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property
rights covering subject matter in this document. Except as expressly provided in any written license
agreement from Microsoft, the furnishing of this document does not give you any license to these
patents, trademarks, copyrights, or other intellectual property.

©2009 Microsoft Corporation. All rights reserved.

Microsoft, Access, Active Directory, Aero, DirextX, Excel, Hyper-V, Powerpoint, PowerShell, RemoteApp,
Silverlight, SharePoint, Windows, Windows Server, and Windows Vista are either registered trademarks
or trademarks of Microsoft Corporation in the United States and/or other countries.

The names of actual companies and products mentioned herein may be the trademarks of their
respective owners.

ii

Table of Contents
Disclaimer.................................................................................................................................................. ii
Table of Contents ......................................................................................................................................... iii
Remote Desktop Services Architecture ........................................................................................................ 1
Remote Desktp Session Host .................................................................................................................... 2
Remote Desktop Virtualization Host......................................................................................................... 2
Centralized Desktop Architecture ............................................................................................................. 3
What’s New in Remote Desktop Services ..................................................................................................... 5
RDSH Server / RDVH Server ...................................................................................................................... 6
RD Connection Broker............................................................................................................................... 7
RD Gateway............................................................................................................................................... 8
RD Web Access.......................................................................................................................................... 9
RD Licensing ............................................................................................................................................ 10
Support for the Virtual Desktop Infrastructure ...................................................................................... 11
Full-Fidelity User Experience....................................................................................................................... 13
Remote Application Access ..................................................................................................................... 13
New Management Features ....................................................................................................................... 14
Roaming User Profile Cache Management ............................................................................................. 14
Fair Share CPU Scheduling ...................................................................................................................... 14
Application Compatibility............................................................................................................................ 16
Remote Desktop IP Virtualization ........................................................................................................... 16
Windows Installer RDS Compatibility ..................................................................................................... 16
At-a-Glance Feature Comparison by Version.............................................................................................. 18
RDS Scenarios.............................................................................................................................................. 20
User Scenarios......................................................................................................................................... 20
Administrator Scenarios.......................................................................................................................... 21
Planning for Windows Server 2008 R2 RDS ................................................................................................ 22
Key Differences Between RDSH Servers and RDVH Servers ................................................................... 22
Piloting RDVH Server ............................................................................................................................... 23
User Applications .................................................................................................................................... 26
Virtual Machine Preparation................................................................................................................... 27

iii

User State................................................................................................................................................ 28
Network .................................................................................................................................................. 29
Better Together: App-V and RDS ................................................................................................................ 31
App-V for RDS: Features and Benefits .................................................................................................... 31
Summary ..................................................................................................................................................... 33

iv

Remote Desktop Services Architecture
The Windows Server® 2008 R2 Remote Desktop Services (RDS) architecture consists of the following
components:

 RD Session Host (RDSH) Server and/or RD Virtualization Host (RDVH) Server
 RD Licensing
 RD Gateway
 RD Connection Broker
 RD Web Access
Figure 1 shows a simple RDS deployment scenario, highlighting the relationships among the different
components. Key points to note are:

 The remote client uses the RD Gateway to obtain access to the RDSH Server and the
RDVH Server.
 The RD Connection Broker connects clients to sessions and virtual machines (VMs) on the RDSH
Server and the RDVH Server.
 All Remote Desktop Servers require validation with an RD Licensing Server.

Figure 1. Simple RDS deployment

1

Remote Desktop Session Host (RDSH)
RDSH Servers function like Terminal Services. Using the RD Connection Broker, RDSH Servers provide
access to applications—either by providing access to the server’s desktop or by using RemoteApp™. In
the event that RemoteApp is used, the RemoteApp and Desktop Connections feature can be used to
distribute RemoteApp program links to Windows® 7 clients. Alternatively, clients can access remote
desktops or RemoteApp applications through the RD Web Access interface. The RD Connection Broker
connects clients evenly across an RDS application farm, as Figure 2 shows.

Figure 1 Simple RDS application farm scenario

Figure 2 also shows client access to a RDSH Server server farm hosting Microsoft® Office Word and
Office Excel®. Each connection is routed to a different server. If the connection is lost, RD Connection
Broker will reestablish the connection to the appropriate RDSH Server.

Remote Desktop Virtualization Host (RDVH)
The RD Virtualization infrastructure adds a new component required for proper functioning of the RDVH
Server: the RD Redirector. The RD Redirector redirects RDP session to the appropriate RDVH Server by
working in conjunction with the RD Connection Broker.

Figure 3 shows the addition of an RD Redirector, providing connectivity to the RD Virtualization Host.

2

Figure 3. Adding an RD Redirector

Centralized Desktop Architecture
One of the key goals in deploying RDS is to centralize the execution and management of remote
desktops and applications. Each technology presented—RDSH Server, RD Virtualization Host Server,
RemoteApp, and Microsoft Application Virtualization (App-V)—provide technologies to centralize
different aspects of a typical desktop load.

To better understand the relationship among the different RDS components and how they fit in with a
centralized desktop-management strategy, see Figure 4, which provides a high-level view of these
interactions.

3

Figure 4. Centralized desktop architecture in the context of virtualization layers

4

What’s New in Remote Desktop Services
Windows Server 2008 R2 Remote Desktop Services is the expansion of a group of services that focuses
on delivering a highly interactive, full-featured desktop experience while maintaining strong
administrative control over applications and desktop execution in a centralized location. RDS
encompasses the roles formerly known under the Terminal Services workload as well as a new role
service to manage and automate access to virtual desktops based on Hyper-V™ technology for a Virtual
Desktop Infrastructure (VDI). Combined, these services are now called Remote Desktop Services. For
Windows Server 2008 R2, the following features have been added or enhanced:

 Windows Server 2008 R2 only supports 64-bit processors. With the introduction of Windows
Server 2008 R2, the Windows Server operating system is compatible only with 64-bit processor
architectures, which allows access to much more system memory. This requirement in turn
allows the operating system and applications running on the server to be much more flexible
and equitable with memory management, enabling more users per server.
 Terminal Services name change. RDS, formerly Terminal Services, in the Windows
Server 2008 R2 operating system provides technologies that enable users to access session-
based desktops, VM-based desktops, or applications in the data center from within a corporate
network or from the Internet. RDS enables a full-fidelity desktop or application experience and
efficiently connects remote workers from managed or unmanaged devices.
In Windows Server 2008 R2, all RDS role services have been renamed. Table 1 lists both the former
name and the new name in Windows Server 2008 R2 for each RDS role service.

Table 1. RDS Role Service and feature Names

Previous name Name in Windows Server 2008 R2
Terminal Services Remote Desktop Services
Terminal server Remote Desktop Session Host Server (RDSH Server)
Terminal Services Licensing (TS Licensing) Remote Desktop Licensing (RD Licensing)
Terminal Services Gateway (TS Gateway) Remote Desktop Gateway (RD Gateway)
Terminal Services Session Broker (TS Session Broker) Remote Desktop Connection Broker (RD Connection Broker)
Terminal Services Easy Print (TS Easy Print) Remote Desktop Easy Print (RD Easy Print)
Terminal Services Web Access (TS Web Access) Remote Desktop Web Access (RD Web Access)
None – New in Windows Server 2008 R2 RemoteApp and Desktop Connections
None – New in Windows Server 2008 R2 Remote Desktop Virtualization Host Server (RDVH Server)

In addition to the RDS role services names, the names of the RDS management tools have changed.
Table 2 shows the former and new names.

5

Table 2. RDS Management Tool Names

Previous name Name in Windows Server 2008 R2
Terminal Services Manager Remote Desktop Server Manager
Terminal Services Configuration Remote Desktop Server Configuration
TS Gateway Manager Remote Desktop RD Gateway Manager
TS Licensing Manager Remote Desktop RD Licensing Manager
TS RemoteApp® Manager RemoteApp Manager

The following sections provide detailed information on key changes in RDS. Specifically covered in this
section are RDSH Server, RD Licensing, RD Connection Broker, RD Gateway, and RD Web Access. Several
areas of interest are discussed in depth in the second part of this document focusing on the RDS
infrastructure.

Remote Desktop Session Host (RDSH) Server
RDSH Server replaces what was referred to as the terminal server role. In Windows Server 2008 R2, the
RDSH Server role has been enhanced with the following improvements:

 RDS includes several enhancements to the underlying services that provide increased
performance to Remote Desktop sessions. These enhancements are applied at the kernel level
and are geared toward increasing the distribution of processor time for each user.
 A scheduling algorithm fairly distributes processor cycles across sessions. The algorithm
dynamically distributes cycles based on the number of active sessions and their load.
 Processor resources are shared on a per-central processing unit (CPU) basis, and each session
gets a fraction of each CPU, which ensures that RDS takes advantage of multiple-core
computing.
 By default, all sessions have an equal weight and are given a processor quota. If threads in a
given session exceed their session’s processor quota, they are interrupted and queued. If the
processor finishes under-quota threads, it takes the highest-priority thread of the least over-
quota session.
RDSH Server has also been enhanced with new management features:

 The roaming user profile cache can be adjusted using Group Policy.
 There are now enhanced command-line management tools based on Windows PowerShell™.
 RDS has been updated to improve application compatibility when users access applications over
a Remote Desktop connection.
 Virtual Internet Protocol (IP) assignment can allow sessions and applications to receive a
dedicated or dynamic IP address.
 The Windows Installer service has been improved to allow for multiple users installing
applications simultaneously.

6

 The applications published by the RemoteApp feature can be filtered by user displaying only the
applications that user has permissions to run.
 RemoteApp applications will also intelligently reuse the sessions for applications that are hosted
on the same RDSH server or farm. This feature is called RemoteApp Source Aggregation.

Client Experience Improvements
The client experience continues to improve. Terminal Services permitted redirection of the Windows
Aero® experience to provide a desktop-like experience for terminal server clients. These improvements
continue with RDSH Server:

 New Client Experience Configuration page. This page is available during role service installation
to enable administrators to easily turn on any of the available features automatically without a
lot of manual configuration. Previously, this feature had to be enabled separately. This page
centralizes the client experience configuration into Remote Desktop Server Manager; the client
must be running Remote Desktop Connection (RDC) version 7.0.
 Audio and video playback redirection. Users can now redirect the audio and video output of
their local computers to a Remote Desktop session.
 Improved remoting for all content types. For applications unable to use existing primitive-based
redirection and the new Windows media redirection feature, bitmap acceleration in R2 has been
significantly enhanced to enable the remoting of rich media content from Microsoft Silverlight™,
and Flash.
 Support for bi-directional audio. Users can now redirect the output of an audio recording
device, such as a microphone, from the local computer to a Remote Desktop session.
 Desktop composition. Users now have the user interface (UI) elements of the Windows Aero
experience within their Remote Desktop session.
Note
Configuring any of these features also installs the Desktop Experience role service and starts the Windows
Audio service on the RDSH Server.

For more information, see What’s New in Remote Desktop Services at
http://technet.microsoft.com/en-us/library/dd560658.aspx.

RD Connection Broker
RD Connection Broker (formerly TS Session Broker) is used to provide users with access to remote
desktop and RemoteApp application resources. For Windows 7 client devices, the RemoteApp and
Desktop Connections feature provides a customized view of those remote resources to users, including
RemoteApp programs, session-based remote desktops, and VM-based remote (virtual) desktops.
RD Connection Broker supports load balancing as well as reconnection to existing sessions and remote
desktops accessed by using RemoteApp and Desktop Connections.

To configure which RemoteApp programs and remote desktops are available through RemoteApp and
Desktop Connections, add the RD Connection Broker role service on a computer running Windows
Server 2008 R2, and then use RD Connection Broker.

7

RD Connection Broker extends the TS Session Broker capabilities included in Windows Server 2008 by
creating a unified administrative experience for traditional session-based remote desktops and VM-
based remote desktops (virtual desktops). A VM-based remote desktop can be either a personal virtual
desktop or part of a shared virtual pool. In the case of a personal virtual desktop, there is a one-to-one
mapping of VMs to users. Each user is assigned a virtual desktop that can be personalized and
customized. These changes are available to the user each time that that user logs on to his or her
personal virtual desktop. For a shared virtual pool, a single image is replicated across many VMs. As
users connect to the shared virtual pool, they are dynamically assigned a virtual desktop. Because users
cannot be assigned the same virtual desktop when they reconnect, no personalization or customization
made by that user is saved by default. RD Connection Broker reconnects a user to a session if he or she
is disconnected. This works for virtual desktops and RDSH Server–based sessions. If the user was
connected to a virtual pool, the user may be able to reconnect to the virtual desktop in the same state
he or she left it depending on the policy that has been configured for automatic session logoff.
RD Connection Broker also acts as an RDSH Server load balancing redirector, aggregating multiple RDSH
Servers and managing user load across each server.


RD Gateway
RD Gateway is a role service in the Remote Desktop Server role included with Windows Server 2008 R2
that allows authorized remote users to connect to resources on an internal network from any device
connected to the Internet. The network resources can be a remote desktop running RemoteApp
programs or computers with RDC enabled. RD Gateway uses the Remote Desktop Protocol (RDP) over
Hypertext Transfer Protocol over Secure Sockets Layer (HTTPS) to establish a secure, encrypted
connection between remote users on the Internet and the internal network resources.

The improvements to the RD Gateway role service will be of interest to organizations that currently use
or are interested in extending RDS to clients not directly connected to the corporate network. The
following changes are available in Windows Server 2008 R2.

Secure Device Redirection Enforcement
An RD Gateway server running Windows Server 2008 R2 includes the option to allow Remote Desktop
clients to connect only to RDSH Servers or RDVH Servers that support secure device redirection. RDC 7.0
is required for secure device redirection to be enforced by the Remote Desktop Server running Windows
Server 2008 R2. Secure device redirection enforcement helps prevent malicious code on remote clients
from overriding security that administrators set. In Windows Server 2008 R2, RDS endpoints will enforce
the redirection policy configured by the gateway. Previously, a rogue client could attempt to connect
directly to endpoints, potentially ignoring the RD Gateway’s configured redirection policy.

Configurable Idle and Session Timeouts
RD Gateway allows configuration of idle and session timeouts on the RD Gateway server. An idle timeout
provides the ability to reclaim resources that inactive user sessions use without affecting the user’s

8

session or data, helping to free resources on the RD Gateway server. After being disconnected, the user
will be able to reestablish the session using RDC. A session timeout provides the capability to
periodically enforce new policies on active user connections, ensuring that any system changes to user
properties, such as domain accounts, Remote Desktop Connection Authorization Policy (RD CAP)
changes, or Remote Desktop Resource Authorization Policy (RD RAP) changes, are enforced on existing
sessions.

Configurable idle and session timeouts with RD Gateway help administrators gain better control on
users who are connecting through RD Gateway. Timeouts allow administrators to reclaim resources
from sessions not currently in use, helping to ensure that idle sessions are not wasting system resources.
User properties that are changed can still be enforced for users accessing the system using Remote
Desktop sessions.

Background Session Authentication and Authorization
If a configured session timeout has been reached, sessions for users whose property information has not
changed are not affected, and authentication and authorization requests are sent in the background.
Background authentication and authorization requests are done automatically and require no user
interaction.

Service and Content Messages
Service and content messages can be added to RD Gateway in Windows Server 2008 R2 and displayed to
the remote desktop user. Service messages can be used to inform users of server-maintenance issues
such as shutdowns and restarts. Content messages can be used to display a logon notice to users before
they gain access to remote resources or legal information that the Remote Desktop user must
acknowledge before starting an RD Gateway session.

RD Gateway can be configured to allow connections only from Remote Desktop clients that support
consent and service messages. The Remote Desktop client must be running RDC 7.0 to connect using
this setting.

Messaging can be used to keep remote desktop clients more informed. Service messages can be used to
inform uses of upcoming server downtimes. Consent messages can be used to display legal information
that the remote desktop user must acknowledge before starting an RD Gateway session.


RD Web Access
RD Web Access, formerly TS Web Access, enables users to access remote resources such as session-
based remote desktops, session-based remote applications, or VM-based remote desktops through a
Web browser. RD Web Access provides a customized view of RemoteApp programs and remote
desktops to users. When a user starts a RemoteApp program, an RDS session is started on the RDSH
Server that hosts the RemoteApp program. If a user connects to a virtual desktop, an RDC is made to

9

either a VM that is running on an RDVH Server or to a desktop on an RDSH Server. To configure which
RemoteApp programs and remote desktops are available through RD Web Access, add the
RD Connection Broker role service on a computer running Windows Server 2008 R2, and then use
RD Connection Broker.

For more information, see Remote Desktop Web Access at http://technet.microsoft.com/en-
us/library/dd560668.aspx.

RD Licensing
The RD Licensing (formerly TS Licensing) role service manages the RDS client access licenses (RDS-CALs)
required for each device or user to connect to an RDSH or RDVH Server. Use RD Licensing to install,
issue, and track the availability of RDS-CALs on an RD Licensing server.

Note
No new CAL is required for Windows Server 2008 R2; both Windows Server 2008 TS-CALs and Windows
Server 2008 R2 RDS-CALs will provide the right to connect to Windows Server 2008 R2. However,
Windows Server 2008 SP2 is required to install RDS-CALs on Windows Server 2008 R2 Licensing Server; as
such, Microsoft recommends installing a Windows Server 2008 R2 License Server.

The following changes are available in Windows Server 2008 R2:

 Automatic license server discovery no longer supported for RDSH Server
 Changes to the Licensing tab in Remote Desktop Server Configuration
 Manage RDS-CALs Wizard
 Service connection point (SCP) registration
The improvements to the RD Licensing role service will be of interest to organizations that currently use
or are interested in deploying RDS in their environment.

Automatic License Server Discovery No Longer Supported for Remote Desktop Servers
In Windows Server 2008 R2, administrators must specify the name of a license server for the RDSH
Server to use by using Remote Desktop Server Configuration. Prior to Windows Server 2008 R2, the
license server was automatically discovered on the network. This discovery is no longer supported for an
RDSH Server that is running Windows Server 2008 R2.

Changes to the Licensing Tab in Remote Desktop Server Configuration
In Remote Desktop Server Configuration in Windows Server 2008 R2, administrators must specify a
license server for the RDSH Server to use. An administrator can either choose from a list of known
license servers or manually enter the name. License servers that are registered as a service connection
point in Active Directory® Domain Services (AD DS) will appear in the list of known license servers in
Remote Desktop Server Configuration. More than one license server can be added for the RDSH Server
to use. If more than one license server is added, the RDSH Server contacts the license servers in the
order in which they appear in the Specified license servers box on the Licensing tab in Remote Desktop
Server Configuration.

10

Manage RDS-CALs Wizard
In Windows Server 2008 R2, a new wizard is available in Remote Desktop RD Licensing Manager that
allows administrators to perform the following tasks:

 Migrate RDS-CALs from one license server to another
 Rebuild the RD Licensing database
Note
The Manage RDS-CALs Wizard can only be used for a license server running Windows Server 2008 R2.

Consider migrating RD CALs from one license server to another if one license server is being replaced
with the other or if one license server is no longer functioning. By using the Manage RDS-CALs Wizard,
administrators can automatically migrate RDS-CALs from one license server to another. If migrating RDS-
CALs from a license server that is not running Windows Server 2008 R2, manually remove the RDS-CALs
from the original license server when the migration process is complete.

Caution
Rebuilding the RD Licensing database deletes any RDS-CALs currently installed on the license server.
Those RDS CALs must be reinstalled on the license server after the database is rebuilt.

Service Connection Point Registration
When the RD Licensing role service in Windows Server 2008 R2 is added using Remote Desktop Server
Manager, the license server attempts to register as an SCP in AD DS. When a license server is registered
as an SCP, it appears in the list of known license servers in Remote Desktop Server Configuration. If
AD DS is not available during installation of the RD Licensing role service, manually register the license
server by using Review Configuration in Remote Desktop RD Licensing Manager.

For information about other new features in RDS, see What's New in Remote Desktop Services at

Support for Virtual Desktop Infrastructure (VDI)
One of the key new features of RDS is the ability to provide users with a VM-based remote desktop, or
virtual desktop. Virtual desktops run client operating systems hosted on Hyper-V–based servers located
in a data center. With RDS and VDI, users can experience rich and individualized desktops with full
administrative control over the desktop and the applications. Administrators have the ability to
configure dedicated personal desktops that will provide a consistent desktop experience for users that is
similar to the experience of using a dedicated desktop or portable computer. Alternatively, VDI desktops
can be pooled and dedicated to a specific set of applications. Key components of a virtual desktop
infrastructure with RDS include the RD Virtualization Host and Hyper-V.

RD Virtualization Host
The RD Virtualization Host feature is an RDS role service included with Windows Server 2008 R2 that
integrates with Hyper-V to provide VM-based remote desktops leveraging RemoteApp and Desktop
Connections and RD Web Access to publish these resources to users. User accounts can be assigned a

11

unique personal virtual desktop or redirected to a shared VM pool in which a virtual desktop is
dynamically assigned. If a user is assigned and requests a personal virtual desktop, RD Connection
Broker redirects the user to this VM. If the VM is not turned on, RD Virtualization Host turns on the VM,
and then connects the user. If the user is connecting to a shared VM pool, RD Connection Broker first
checks to see whether the user has a disconnected VM session in the pool. If the user has a
disconnected session, the user is reconnected to that VM. If the user does not have a disconnected
session, a VM in that pool (if one is available) is dynamically assigned to the user.

Hyper-V
Hyper-V provides the virtualization management and host platform for the virtualized client operating
systems. It has also been enhanced in Windows Server 2008 R2, providing support for live migration of
VMs. There is no perceived downtime in the desktop workloads running in the VM, and network
connections from and to the VM being migrated stay connected. This capability is possible between
hosts within a high-availability cluster. Other improvements that Hyper-V provides include:

 Dynamic VM storage. Improvements to VM storage include support for hot plug-in and hot
removal of the storage. By supporting the addition or removal of virtual hard disks and physical
disks while a VM is running, it is possible to quickly reconfigure VMs to meet changing
requirements. Administrators can also add and remove both virtual hard disks and physical disks
to existing SCSI controllers of VMs. Hot plug-in and removal of storage requires the installation
of Hyper-V integration services (included in Windows Server 2008 R2) on the guest operating
system.
 Enhanced processor support. Now, up to 32 physical processor cores are available. The
increased processor support makes it possible to run even more demanding workloads on a
single host. In addition, there is support for Second-Level Address Translation (SLAT) and CPU
Core Parking. CPU Core Parking enables Windows and Hyper-V to consolidate processing onto
the fewest possible number of processor cores and suspends inactive processor cores. SLAT
adds a second level of paging below the architectural x86/x64 paging tables in x86/x64
processors. It provides an indirection layer from VM memory access to the physical memory
access. In virtualization scenarios, hardware-based SLAT support improves performance. With
Intel processors, this feature is called Extended Page Tables (EPT); with AMD processors, it is
called Nested Page Tables (NPT).
 Microsoft System Center Virtual Machine Manager 2008 R2 (in beta as of this writing). System
Center Virtual Machine Manager simplifies the deployment, provisioning, and management of
the virtualized desktop running in VMs. Although not required, it is strongly recommended to
minimize the administrative overhead of managing production virtual servers.
For additional information on Hyper-V in Windows Server 2008 R2, see What’s New in Hyper-V at

12

Full-Fidelity User Experience
The new capabilities mentioned so far, enabled with Windows Server 2008 R2 in combination with
Windows 7 Enterprise and Windows 7 Ultimate, significantly improve the experience of remote users,
making it more similar to the experience enjoyed by users accessing local computing resources. These
improvements include:

 Multimedia redirection. Provides high-quality multimedia by redirecting multimedia files and
streams so that audio and video content is sent in its original format from the server to the
client and rendered using the client’s local media playback capabilities.
 True multiple-monitor support. Enables support for up to 16 monitors of almost any size,
resolution, or layout with RemoteApp and Remote Desktop; applications will behave just like
they do when running locally.
 Audio input and recording. Supports any microphone connected to the user’s local machine,
enables audio recording support for Voice over IP (VoIP) scenarios, and enables applications
such as speech recognition for RDS clients.
 Windows Aero Glass support. Provides users with the ability to use the Windows Aero Glass
experience for RDSH Servers, ensuring that Remote Desktop sessions look and feel like local
desktop sessions.
 Enhanced bitmap acceleration. Allows rich media content, such as portable graphics stacks
(Silverlight, Flash) and 3D content, including applications using DirectX versions 9, 10, and 11, to
be rendered on the host and to be sent as accelerated bitmaps to the remote client.
 Improved audio/video synchronization. RDP improvements in Windows Server 2008 R2 are
designed to provide closer synchronization of audio and video content in most scenarios.
 Language bar redirection. Allows users to easily and seamlessly control the language setting (for
example, right to left) for RemoteApp programs using the local language bar.

Remote Application Access
The new RemoteApp and Desktop Connection feature provides a set of resources, such as RemoteApp
programs and remote desktops. These feeds are presented to Windows 7 users using the new
RemoteApp and Desktop Connection Control Panel item. RemoteApp and RD Web Access provide the
ability to connect to resources from the Windows Vista® and Windows XP operating systems in addition
to Windows 7. Using the RemoteApp and Desktop Connections Control Panel item, a user can easily
connect to RemoteApp programs and remote desktops. RemoteApp programs and desktops show up in
the Start menu, and a new system tray icon shows connectivity status to all the connections the user
has.

13

New Management Features
There have been a number of management-related improvements for RDS in Windows Server 2008 R2,
including:

 New APIs for greater software leverage and awareness.
 Tighter integration between RDS management and Remote Desktop Server Manager, which
reduces the number of Microsoft Management Console (MMC) windows required to perform
common administrative tasks, reducing administrative complexity and effort. Features like
Connected Broker Extensibility and Windows PowerShell support further enhance the flexibility
that administrators have in designing an RDS/VDI infrastructure.
 Windows PowerShell cmdlets provide the ability to fully manage RDS, augment the graphical
management tools, and help automate repetitive management tasks.
 A Best Practice Analyzer gives administrators instant validation and feedback for new RDS
installations.

Roaming User Profile Cache Management
An RDS environment can potentially have hundreds of distinct users. Whereas caching of roaming user
profiles is enabled for a better user experience, this profile cache can grow very large and may
potentially overrun the available disk space on the server. Controlling the cache size of individual user
profiles may not be effective on the RDSH Server, because there can be hundreds of new, distinct users.

A new Group Policy setting is available for RDS in Windows Server 2008 R2 that limits the size of the
overall roaming profile cache (located in %systemdrive%users directory). If the size of the profile cache
exceeds the configured size, RDS deletes the least recently used copies of roaming profiles until the
overall cache goes below the quota.

Administrators can configure the maximum size of the roaming user profile cache on a RDSH Server by
using Group Policy. The policy setting is found in the following location: Computer
ConfigurationAdministrative TemplatesWindows ComponentsTerminal ServicesTerminal
ServerProfilesLimit the size of the entire roaming user profile cache. To enable this policy setting,
specify a monitoring interval (in minutes) and a maximum size (in gigabytes) for the entire roaming user
profile cache. The monitoring interval determines how often the size of the roaming user profile cache is
checked.

Fair Share CPU Scheduling
Fair Share CPU Scheduling dynamically distributes processor time across sessions based on the number
of active sessions and the load on those sessions. This is done by using a new kernel-level scheduling
mechanism included with Windows Server 2008 R2 that will respond significantly faster than Windows
System Resource Manager (WSRM) did in Windows Server 2008. On an RDSH Server, one user will not
affect the performance of another user’s session, even if the RDSH Server is under a high load.

14

Fair Share CPU Scheduling is enabled by default. To disable this feature, configure the following Group
Policy item: Computer ConfigurationPoliciesAdministrative TemplatesWindows ComponentsRemote
Desktop ServicesRemote Desktop ServerProfiles.

Note: as of this writing the Group policy Configuration has a known issue. This setting can also be
disabled by setting the following registry entry to 0:
HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindowsSessionManagerDFSSEnableDFSS

Prior to Windows Server 2008 R2, the Windows Scheduler provided a fair scheduling policy by
distributing the processor time evenly across all threads at a given priority level. Priority could be
adjusted by using management software such as WSRM to give one thread preference over another. In
an environment with multiple users, this scheduling policy provided a good way to throttle any one user
from completely monopolizing the processor but was unable to evenly distribute the processor time in
the presence of dynamic loads. WSRM can still be used to provide more granular control of the new
scheduling mechanism in Windows Server 2008 R2.

15

Application Compatibility
RDS includes several new application-compatibility updates to make installing, managing, and providing
access to applications easier. Windows Installer (MSI) application issues have been alleviated by
enhancements to the Windows Installer. Most applications were written to be installed on the desktop
and often required special steps for installation on a terminal server machine. Windows Installer adds
missing per-user configuration settings during the initial application startup phase to reduce the need to
install applications using special installation modes. If a user is permitted to install applications, RDS can
allow concurrent MSI installations from multiple users. It accomplishes this by queuing installation
requests and processing them sequentially.

Remote Desktop IP Virtualization
Previously, when applications were required to comply with specific IP address connection rules,
Terminal Services could experience issues providing remote users access to applications. These rules
may be the result of regulatory or security policies. Remote Desktop IP Virtualization allows IP addresses
to be assigned to Remote Desktop sessions on a per-user or per-program basis. Some programs require
that each instance of the application be assigned a unique IP address. Prior to Windows Server 2008 R2,
every session on an RDSH Server was assigned the same IP address. With Windows Server 2008 R2, the
administrator can specify a network ID that Remote Desktop IP Virtualization uses to assign IP addresses
on a per-user or per-program basis. IP addresses are dynamically assigned to applications through the
Dynamic Host Configuration Protocol (DHCP). Once a user has launched an application and initiated a
session that requires a virtual IP address each subsequent user that uses the application will use the IP
address that was acquired by the first user. Any application that is not configured to run with a virtual IP
address will continue to us the RDSH server’s address. These settings can be configured in the Server
Manager MMC or by group policy.

Windows Installer RDS Compatibility
Prior to RDS in Windows Server 2008 R2, only one Windows Installer installation was supported at a
time. As a result, if multiple users logged on and invoked an installation (or first run of an MSI
application), then the two users would conflict, meaning that one would continue to run but the other
would see an issue (for example, two new users logging on to a terminal server at the same and starting
Office Word).

Windows Installer RDS Compatibility is a new feature included with RDS in Windows Server 2008 R2 in
which per-user application installations are queued by the RDSH Server, and then handled by Windows
Installer, ensuring that the user does not see an error message. Enhancements to the RDS installer also
allow administrators to install applications without the need to user the setup/install mode. When
installing application it is important to install for all users, and ensure that all components required are
installed locally.

16

Windows Installer RDS Compatibility is enabled by default. To disable this feature, configure the
following registry key to 0:

HKEY_LOCAL_MACHINESoftwarePoliciesMicrosoftWindows NTTerminal
ServicesTSAppSrvTSMSIEnable.

17

At-a-Glance Feature Comparison by Version
RDS in Windows Server 2008 R2 offers many new features and functionality over previous versions. The
key features are highlighted in Table 3.

Table 3. RDS–Terminal Services Feature Comparison

RDS in Terminal Terminal Requires Windows
Windows Services in Services in Vista with Service
Server 2008 Windows Windows Pack 1 (SP1) or
R2 Server 2008 Server 2003 Windows XP with SP3
RDC
Key features
RDSH Server X X X
RemoteApp X X X
RD Gateway X X X
RD Web Access X X X
4
RD Easy Print X X X
Unified Remote Desktop and Web client X X X
RDVH Server X
Experience features
24-bit color X X X
32-bit color X X X
Font smoothing X X X
Display data prioritization X X X
Large resolution support (4096 × 2048) X X X
Monitor spanning X X X
Multiple monitors X
1
Advanced compression X X X
Windows Aero Glass X X
Windows Media Remoting X

Device redirection

Remote Desktop legacy printer redirection X X X
Plug-and-Play device redirection
X X X
framework support
Serial port redirection X X X
Sound redirection X X X
Basic clipboard redirection X X X

18

RDS in Terminal Terminal Requires Windows
Windows Services in Services in Vista with Service
Server 2008 Windows Windows Pack 1 (SP1) or
R2 Server 2008 Server 2003 Windows XP with SP3
RDC
Advanced clipboard redirection X X X
Security
Smart card support X X X
Federal Information Processing (FIPS) 140-1
X X X
support
Secure Sockets Layer (SSL) authentication X X X
Network-level authentication X X X
5
CredSSP single sign-on (SSO) X X X
Network Access Protection (NAP)
2 X X X
integration
RDP signing X X X
3
Wildcard SSL certificate support X X X
Enterprise management
Per-user license tracking X X
Per-device license tracking and
X X X
enforcement
License diagnosis and support tools X X
RD Connection Broker (session-based load
X X
balancing)
Session directory (non-Microsoft Network
X X X
Load Balancing [NLB] support)
WSRM support X X
Full IP version 6 (IPv6) support X X X
Windows PowerShell integration X
Performance
Fairly distributes processor cycles across
X
sessions
Sharing on a per-CPU basis X

19

RDS Scenarios
RDS can be useful in a many scenarios. Typically, there are two main drivers for scenarios that users
need. Some common scenarios that benefit from RDS are user-based scenarios and administrator-based
scenarios. Many additional scenarios could benefit from RDS, but those mentioned here are meant as a
general overview of the more popular scenarios.

User Scenarios
User-based scenarios are driven by a specific class of user. Common user types that benefit from RDS
are mobile workers, task workers (such as factory floor and call center workers), contractor/offshore
workers, and remote workers in branch offices.

Mobile Workers
If an organization needs to support employees who are mobile, work from home, or work from the road,
a RDS solution can enable employee productivity anywhere and increase effective user collaboration
without compromising security. RDS can offer secure access to desktops and applications over low-
bandwidth connections without requiring new applications to be distributed to every client. Employees
will see a consistent set of applications and can access their own data regardless of location. If
employees need access to a comprehensive desktop experience, they can be assigned a personal virtual
desktop within the confines of the corporate data center. This improves the RDS offering available to
users while keeping the environment securely managed. With the wide adoption of third-generation
(3G) wireless networks, users are even more capable of experiencing a full-fidelity desktop remotely.

Task Workers
If an organization includes structured task workers, such as in call centers and retail branches, RDS can
provide a more cost-effective and productive user experience, because these user roles don’t typically
need access to multiple applications to complete business processes. Additionally, there are situations
when the location is simply not capable of supporting a fully functioning client computer; instead, thin-
client solutions are more applicable. The same experience can be provided even if the client computer is
a legacy computer, a non-Windows computer, or one of today’s mobile Internet devices (MIDs). This
type of deployment can extend the reach of Windows-based applications within the enterprise and is a
valuable way to deliver the right business tools in a cost-effective way.

Contractor/Offshore Workers
Many companies are leveraging workforce experience from around the world. Organizations will need
to provide access to applications for users located both remotely and internationally. In order to provide
access to resources while respecting corporate policies, providing a virtual desktop or virtual desktop
pool becomes very attractive for organizations. This option allows users to receive a first-class client on
the network while allowing the organization to control where the desktop is running, how the desktop is
accessed, how data is being run on the client computer, and where data is stored.

20

Remote Workers: Branch Offices
In an environment that relies on remote or branch offices, RDS can provide enhanced capabilities to
these sites and reduce the network bandwidth that the required applications use. For example, a bank
might have essential financial software applications that would not be cost-effective to deploy and
maintain in every branch. With RDS, the software can be available at a central headquarters and
accessed as needed by employees in different locations. A centralized-applications strategy often results
in a reduction of application server infrastructure at various branches or locations, requiring much less
maintenance and on-site support from the home office information technology (IT) staff.

Administrator Scenarios
Common administrator situations that benefit from RDS are regulatory compliance requirements,
complex applications, and merger integration or outsourcing.

Regulatory Compliance Requirements
For the IT department, data security and the ability to meet regulatory requirements remains top of
mind. RDS helps secure an application and its data in a central location, reducing the risk of accidental
data loss caused by, for example, the loss of a portable computer. Key features of RDS such as
RD Gateway and RemoteApp help ensure that partners or users who do not need full access to a
company network or computers can be limited to a single application or desktop, if needed.

Complex Applications
In an environment with complex applications such as line-of-business (LOB) or customized legacy
software, or in scenarios where large and complex applications are frequently updated but difficult to
automate, RDS can greatly help simplify the process by reducing the burden of having to run multiple
applications across the entire environment. Applications can be configured on a pool of virtual desktops
that provide client machines access to the applications they require from a central source rather than
requiring applications to be installed locally.

Merger Integration or Outsourcing
In the case of a merger, the affected organizations will typically need to use the same LOB applications,
although they may be in a variety of configurations and versions. Additionally, organizations may find
that they are working with outsourced or partner organizations that need access to specific LOB
applications but not to the full corporate network. Rather than performing a costly deployment of the
entire set of LOB applications across the extended infrastructure, these applications can be installed
with the help of RDS on a Remote Desktop Server and made available to the employees and business
partners who require access, when they need it.

21

Planning for Windows Server 2008 R2 RDS
Planning and architecting Windows Server 2008 R2 RDS is a multistep process that should take into
account users, applications, and availability requirements. If the organization intends on implementing
virtual desktops, it also becomes necessary to plan infrastructure for Hyper-V, which means that if the
organization had a Terminal Services infrastructure that had to comply with various high-availability
requirements, IT will need to build a Hyper-v environment with the same specifications. Planning RDS
includes considerations from a wide array of Windows services. The following sections cover the key
considerations and provide an overview of different architectures for deploying RDS.

Key Differences Between RDSH Servers and RDVH Servers
Planning RDS architecture depends on the specific needs of the users that RDS infrastructure will be
serving. It is important to target the correct technology for each scenario in which users may require
remote access to a desktop or to applications. Table 4 illustrates several key differences between
RDSH Server (formerly known as terminal servers) and RDVH Servers.

Table 4. Key Differences Between RDSH Servers and RDVH Servers

RDSH Server RDVH Server Comments

Technology Established Launched RDVH Server is a new component in Windows Server 2008 R2. It is
maturity important that stakeholders understand the new services and the
associated implications, including users who are new to VDI concepts. It
is also critical for management and corporate entities such as security
teams and corporate policy enforcement teams to be aware of the
impact that VDI will have on them.
Scalability Higher ratio of Lower ratio of VMs require additional input/output (I/O) and memory. Policies can be
users to servers users to servers put in place to insure that each VM receives a set amount of CPU time or
memory usage; however, the number of users who will be
accommodated on similar hardware will be lower when serving VMs.
Isolation/security Session-based VM-based VMs offer an additional level of administrative isolation. When users are
isolation isolation directed to the virtual desktop, the supporting Hyper-V parent
Shared Dedicated environment is completely abstracted from the user, which allows full
operating operating administrative lock-down of the hosting environment while allowing full
system across system per user access to the VM. The VMs can even be placed on separate virtual local
users area networks (VLANs) for network isolation.
Can run as
Must run as administrator
standard user
Remote user Protocol- Protocol- Depending on the version of the RDP client, the user can experience a
experience dependent dependent rich, high-fidelity desktop experience. Using RDC 7 and Windows 7, the
client can take advantage of the visual enhancements of Windows Aero
Glass, audio redirection, and high-definition video playback.

22

RDSH Server RDVH Server Comments

User flexibility User is running User can have When users are connected to Remote Desktop sessions, they must be
as a user lowest full rights logged onto the Remote Desktop Server as a low privilege user to prevent
user privileges the user from being able to make system-wide changes that may have
impacts on other users. Using virtual desktops, users can be granted full
rights to the desktop.
Application Windows Server Windows client Many applications validate that they are running on a client operating
compatibility operating desktop system. Often, applications will not run on a server operating system or
systems in a Terminal Services session. Administrators now have the option to run
these applications in a VM, where client version requirements can be
met.

Piloting RDVH Server
Terminal Services has been a widely used technology in the enterprise for many years. Windows
Server 2008 R2 introduces a solution to provide VDIs to users. Piloting the VDI solution requires planning
not only traditional RDS technology using Remote Desktop session–based services but also
considerations for Hyper-V infrastructure implementation. The following are key areas will need to be
considered while planning a VDI deployment and should be determined during the testing and piloting
steps. As this technology is being introduced with Windows Server 2008 R2, it will also be necessary to
analyze the results of the trial on the following elements of VDI to determine the best course of action
for your VDI deployment.

Test or Pilot?
Given budget and resource restraints, IT may wonder whether to test or to pilot. Unless the organization
is prepared to spend large amounts of resources analyzing users’ work habits and capturing these
actions into a simulated script, it is more effective to go into a pilot mode after having determined which
RDS options are suitable for the organization’s users. The main goal of the pilot should be to
demonstrate the benefits of deploying the technology.

Sizing and Capacity Planning
If the organization feels comfortable moving directly to a pilot phase and chosen a server configuration
as a starting point, gradually add users to determine the maximum number that a system configuration
(Terminal Server/network architecture/infrastructure servers) can support. To get a good understanding
of the infrastructure scalability requirements, choose users from those across the different departments
in the company that are typically a good fit for RDS—such as contractors or offshore workers in the case
of VDI. Doing so provides a good understanding of the different usage pattern of these patterns for the
different types of users and their acceptance for the solution. If the organization has chosen to employ a
more formal planning process, Microsoft offers several tools that can help plan the required
infrastructure for RDS:

 Microsoft Assessment and Planning (MAP) Toolkit for Hyper-V. Helps administrators plan
Hyper-V capacity requirements based on a comprehensive set of variables, including the

23

number of users, processor capacity, and network bandwidth. Go to
http://technet.microsoft.com/en-us/solutionaccelerators/dd537570.aspx for details.
 MAP Toolkit for Windows Server 2008. Plan the deployment of Windows Server 2008
computers and services. Go to http://technet.microsoft.com/en-
us/solutionaccelerators/dd537573.aspx for details.
 Microsoft System Center Capacity Planner 2007. Helps plan capacity for a management
infrastructure that may be desired for the management and health of RDS. Go to
http://www.microsoft.com/Systemcenter/en/us/capacity-planner.aspx for details.
Regardless of the method used for planning and sizing RDS, It is important to implement a user
feedback–collection process throughout the piloting and testing phases for the purpose of establishing
policies and procedures to mitigate potential problems before they affect a large number of users. This
feedback should also include input from the IT teams rolling out and supporting the RDS infrastructure.
Finally, project stakeholders and management require a way to measure the feedback and how the pilot
team is responding to the feedback. Addressing user issues and keeping stakeholders apprised of the
status of the pilot are key to successfully moving to a full production rollout.

RDVH Server Virtual Management and Storage Considerations
The RDVH Server leverages the Hyper-V VM environment, which means that along with sizing server
capacity to handle concurrent VMs, planning how to store virtual hard disk (VHD) images must be
undertaken. Two types of virtual desktops should be considered, and both VDI scenarios have different
storage implications: Personal VMs will have a dedicated VHD files, whereas VM pools may be able to
share base VHD files. In the latter case, VHD state is not maintained over the life of the VM but rather
over the life of the desktop session.

VHD behavior depends on the VDI scenario:

 Personal virtual desktops. Most users assigned a personal VM will have a single VHD dedicated
to their virtual desktop. This VHD will change according to the user action on the VM. The state
of the VM from one user login session to the next will remain the same. When planning storage
requirements, there are considerations for which type of VHD to use—dynamically expanding or
fixed—where the VHD will be stored, and whether local storage or a Storage Area Network
(SAN) will be used. Figure 5 shows this scenario.

24

Figure 5. The personal virtual desktop scenario

 Pooled virtual desktops. When pooled virtual desktops are implemented, the user’s
environment remains the same across each VM in the pool. VHDs can be shared between users.
User state and changes made during the Remote Desktop session is deleted from the VHD when
the user logs off from the VM. However, roaming profiles and folder redirection can be used to
provide additional flexibility to a virtual desktop pool setup. Planning VHD storage will center on
understanding how much space the temporary user state across all VMs in the pool could take
at if all VMs are being used at the same time. Figure 6 shows this scenario.

Figure 6. The pooled virtual desktop scenario

Personal and pooled virtual desktops address a diverse set of needs. Planning VHD storage for the pilot
and rollout of virtual desktops will be a key step in a successful VDI deployment. Several key questions
that should be answered are:

 What percentage of the VDI user population will use each scenario? Answering this question
requires an understanding of the applications that will be deployed, the level of administrative

25

access that users require, the need for user state to be saved on the VM, and the need for user
state to persist from one session to the next. By answering this question, IT can plan the
appropriate storage requirements for users of each scenario.
 What type of users will use each scenario? The technical knowledge level of the users may
affect the kind of virtual desktop deployed. It is important, however, to keep in mind that a
strong business reason should be the foundation of any method, as both scenarios offer the
possibility of a high level of administrative control.
 In the case of pooled VMs, how do you plan to handle user state? When a user logs on to a
pooled VM, that user’s user state is created on the VM. If roaming profiles are in use in the
environment, this means that each time a user logs on to a pooled VM, the user state is loaded
and, when the user logs off, the user state is deleted. If users have a large user profile, this
behavior may cause unacceptable delays when users log on.
 In the case of pooled VMs, how often do you expect to refresh the pool with new images?
Every time a VM is refreshed in a pool, all VMs in that pool must be refreshed. When planning
the storage requirements, understanding the storage impact of refreshing pools of VMs
prevents situations in which pools cannot be refreshed without affecting users.
Each of these considerations helps determine what kind and how much storage will be most appropriate
for the organization. Regardless of which scenario will be implemented, when planning the pilot phase,
it is critical to base the initial architecture on a scalable storage mechanism. Doing so ensures a smooth
transition from pilot to production as additional storage is required.

User Applications
Another key area when planning for virtual desktops is to determine how users’ applications will be
deployed to desktops. As traditional desktop applications require patching and updates, by leveraging
the centralized nature of virtual desktops, patching can be performed directly on the VM in the data
center. The ability to quickly deliver updates is increased, and the impact to users is minimized.

When patching an application in a VM pool, all VMs must be patched. This requirement poses a
challenge when the pool contains a significant number of VMs. When applications are deployed to a
large number of personal desktops, it may be difficult to determine whether applications have been
patched. Users with administrative control of the desktop may avoid patching, or desktops that have not
been logged on to in a long time may be significantly out of date. To address these issues, it is
recommended that where possible, application virtualization should be used to provide virtualized
applications to virtual desktops.

App-V abstracts the application life cycle from the user operating system. Applications are not physically
installed on the computer, which means that application files, registry entries, COM objects, and
services are not merged with a computer’s file system registry. Applications can be managed and
deployed using MSI packages, making them deployable through many off-the-shelf electronic software-
distribution systems, or they can be deployed using Microsoft System Center Configuration
Manager 2007. System Center Configuration Manager also offers the option of streaming the
applications to the target VMs, which minimizes the initial footprint of the application with minimal
impact on users when they launch the application.

26

App-V also provides a solution for application-to-application compatibility issues, meaning that because
applications run in isolated environments, they are not aware of the existence of other applications. As
an example, this can allow different versions of Microsoft Office Access® to run on the same computer.
This is also application-to-session–based application deployment, where App-V for Terminal Services can
provides the ability to consolidate applications to a single RDSH Server.

Using RemoteApp, administrators can also solve application-to-application compatibility issues by
redirecting where the application is executed, again abstracting the application from the desktop
environment.

Considerations
Consider deploying ubiquitous applications as part of the master image. Applications that are used as
dependencies by many other applications, such as Microsoft Office applications, are good examples of
the types of applications that would be included in the base image.

Choosing which application abstraction technology to use could be based on how many applications
need to be abstracted, how users will have applications deployed, and user requirements when using
the applications.

Consider using App-V’s ability to redirect user state to a network location (not into the profile). App-V
can store user state information about virtual applications in a configurable location, which provides an
option to allow user information to be in a network location, preserving a user’s application
customizations even if using virtual desktops in a pool.

Virtual Machine Preparation
Preparing a VM for use in VDI requires preparing an image, or VM template. In large-scale deployments,
this invariably requires deployment automation. Depending on the version of the virtual desktop
operating system, this may require varying levels of deployment customization.

Considerations
VMs that are part of a VM pool need to be generalized to the point that no unique user information is
part of the image. To accomplish this, when a VM is ready to be deployed into a VM pool, it needs to run
the System Preparation Tool (Sysprep). Applying Sysprep to an operating system image removes unique
information, such as the operating system’s globally unique identifier (GUID), and naming. When the VM
is restarted, either it will prompt the user to enter information about the machine—asking for a name
and domain information—or, as part of an automated deployment process, the VM would acquire this
information itself. For additional details on automated deployment processes, refer to Microsoft
Deployment Toolkit (MDT) 2010.

Note
Although other tools can generalize a Windows operating system image, only Sysprep is officially
supported by Microsoft.

27

Patching Virtual Desktops
Like any physical client computer, it is important to plan the patching of virtual desktops. Unlike physical
desktops, patching VMs can be accomplished with a higher degree of certainty and can be performed
faster. As patching is a crucial aspect of a healthy desktop life cycle, the patching strategy for virtual
desktops should be planned from the testing phase in a VDI rollout.

Using an automated patching service such as Windows Server Update Services (WSUS) is highly
recommended. This server should be physically close to the VMs or linked using a high-speed
connection. This ensures that VMs are patched as quickly as possible and minimizes downtime.

Patching a VM can have an impact on the base VHD file over time. As administrators apply patches, the
VHD image grows. In pooled environments, the amount of patching required—both for operating
system and applications—should be estimated to get an idea of the growth of the hard disk. In some
instances, it may be more desirable to recreate master images so that all VHDs deployed going forward
are up to date.

Using App-V, IT can separate application patching and operating system and core application patching
into two separate and independent processes. Applications are deployed and sequenced separately
from the base operating system. Microsoft recommends using this method, as it allows a more granular
segmentation of maintaining applications and VMs. This in turn provides greater flexibility to assign
maintenance of various applications and/or the operating system to different individuals or teams.

User State
One of the most volatile elements of managing VM-based desktops is handling user state. In both
personal desktops and virtual desktop pools, user state must be handled in such way as to minimize the
impact loading and managing user state have on the virtual desktop.

User state can cause significant growth of VM images. To keep this growth controlled, several Windows
user state–management features are available:

 Use roaming profiles or mandatory profiles in conjunction with a strong user profile policy to
keep user profile data to a controlled and predictable growth rate.
 Use Folder Redirection to keep folders that traditionally become large (such as the Documents
folder or the Pictures folder) to a network location to keep the files from being stored as part of
the VHD.
 Do not place Offline Folder (OST) and Personal Folder (PST) files in redirected folders. Because of
the constant access nature of these file types, placing them on a network connection could
cause a significant increase in avoidable network traffic.
 Implement quota policies to prevent users from surpassing expected usage. The importance of
this step cannot be understated. It is important to find the right balance between user
expectations and business needs, but users should understand that once the balance has been
established, proper business-driven justification should be provided before the quotas policy is
changed.

28

To keep the performance of the VMs as fast as possible, make sure that the servers hosting the user
profile data are connected over a fast network connection to the VMs.

Note
Although many circumstances can limit the use of options such as roaming profiles with physical desktops,
being able to place the profiles server next to the virtual host server alleviates the most common cause
for not implementing roaming profiles.

Network
Designing the network environment for RDS includes the added dimension of planning for network
communications with the virtual desktop as well as the communications between users and the
RDSH Servers or RDVH Servers.

Understanding the network environment is especially important when designing an RDS solution that
involves wide area network (WAN) communications. Even infrequent network slowdowns can cause
unacceptable performance to Remote Desktop Server users. Both latency (the time it takes a packet to
reach the other end of the network) and bandwidth (the amount of data that can travel over the
network within a given period of time) are important factors.

Because everything users see on their screen is generated by the RDSH Server or RDVH Server, high
latency has a serious impact on the perceived response of the system, while low bandwidth affects the
time it takes to get large chunks of data (like bitmaps) to a user’s screen. Therefore, variables such as
the typing rate of the users, the amount of graphics used in an application, and how many users are
working at any one time over a WAN connection all factor into the equation when asking, “How many
users can I connect to an RDS infrastructure a Remote Desktop Server over this type of connection?” The
only reliable way of answering this question is to test it in an actual network. Keep in mind that the user
experience very much depends on there being sufficient bandwidth available when the application is
writing large amounts of information to the screen. Connecting over a low-bandwidth connection has no
significant impact on RDSH Server/RDVH Server scaling. A low-bandwidth connection consumes just as
many back-end resources as a high-bandwidth connection.

Note
With the introduction of high-definition (HD) video support, enhanced bitmap acceleration and Windows
Aero, some features may not be available or performing well when accessing an
RDSH Server/RDVH Server through a low-bandwidth connection.

To maximize performance of the virtual desktops, the network required to move user state information
should be sized to accommodate the use of roaming profiles or redirected folders. It is important to
remember that the profile information should be placed on the same network or on fast link with the
RDVH Server. This means ensuring that the physical server hosting the parent and child VMs has the
required bandwidth not only to provide fast access between virtual desktops and profile data but
Remote Desktop connections to the VMs.

29

The same goes for application access—especially when virtual applications are being used. If
applications are being streamed, additional network capacity may be required to ensure expedient
delivery of applications.

Network consideration should also be taken into account when planning Remote Desktop VMs in
conjunction with a network-based SAN. Appropriate network adapters should be dedicated for SAN
communications.

30

Better Together: App-V and RDS
Server growth is a costly issue for organizations that rely on RDS. To avoid post-installation application
conflicts, applications must be tested up front to determine which applications may collide and,
therefore, must be separated and run on different RDSH Server silos—a time-consuming and costly
process. Servers are routinely underutilized, because each one is locked into a specific configuration,
capable of serving only a limited set of non-conflicting applications and typically using just 25 percent of
its capacity.

With the introduction of RDVH Servers, entire desktops can be run on VMs. To maintain applications and
provide them on VMs, VMs need to be taken offline for maintenance and testing needs to be performed
to make sure the updated application do not conflict with already-installed software. Regression testing
is all the more important with VM pools, as a software problem that goes undetected can affect every
user accessing the pool. App-V completely changes this situation. App-V for RDS completely changes this
situation.

App-V for RDS: Features and Benefits
App-V for RDS has many features and benefits that can add value to an organization:

 Consolidate servers and end server siloing, increasing server farm return on investment (ROI).
App-V for RDS allows any application to run alongside any other—even applications that
typically conflict, multiple versions of the same application, and many applications that
previously could not run under a session –based (i.e. Terminal Services) scenario. This eliminates
the need for server silos and significantly improves server utilization. As a result, the number of
servers needed is much lower, operational costs for managing the remaining servers is reduced,
and the server farm ROI is increased. Often, customers can see up to a 40 percent reduction in
the number of terminal servers needed by using App-V for RDS.
 End application conflicts and regression testing. By eliminating the need to permanently install
applications on servers and shielding the operating system and applications from changes
created when installed applications run, App-V for RDS prevents problems that hinder
deployments. The need to perform lengthy regression testing is also significantly reduced.
 Deploy applications to RDSH Server users using RDS or RDVH Servers directly to virtual
desktops with no interruption to users or servers. Typically, when new applications are
installed on an RDSH Server, all users must be logged off, and often, the server must be
restarted. Now, with virtualization of applications, it is possible to deploy the application to the
server without a restart and without affecting the system or the users currently logged on. This
makes deploying and maintaining applications a much lower-risk proposition and ensures that
servers need less scheduled downtime while improving business agility.
 Build business continuity for applications. IT can replicate virtualized applications like any other
enterprise data to maintain an instant on-failover plan for applications. Applications can be kept
up to date between live sites and back-up sites by automatically replicating virtualized
application files on the live sites’ servers to servers at a back-up site (using non-Microsoft tools).

31

 Simplify operating system migrations and patching. Turn time-consuming migration and
patching projects into largely automated, conflict-free processes. Applications typically do not
have to be repackaged for operating system migrations. Patching and migrations do not require
regression testing.
 Scalability. The unique approach of App-V for RDA enables applications to be centrally stored,
and then delivered and executed on RDSH Servers on demand. Application files are only
delivered once to the RDSH Server, where they are cached for repeat use by multiple users. As a
result, App-V for RDS is a bandwidth-efficient method of distributing applications to
RDSH Servers, ensuring that many RDSH Servers and thousands of connected users are
supported.
 Integration with System Center Configuration Manager. With System Center Configuration
Manager, administrators get the benefits of application virtualization and dynamic streaming
from within the System Center Configuration Manager infrastructure. This provides the
flexibility to choose the best way to deploy and run applications while maintaining operating
system–level patches, updates, inventory, and asset tracking with a single, integrated
management point.

32

Summary
Windows Server 2008 R2 RDS provides a flexible set of options for administrators to deploy applications
and support users. With the introduction of virtual desktops, administrators can provide isolated full-
fidelity desktop environments that can be first-class citizens in the corporate environments.
Administrators maintain management, control, and security over desktops and can enforce corporate
policies and industry regulations.

33

Microsoft India - Windows Server 2008 R2 Remote Desktop Services Whitepaper

More Related Content

What's hot (20)

Similar to Microsoft India - Windows Server 2008 R2 Remote Desktop Services Whitepaper (20)

More from Microsoft Private Cloud (20)

Recently uploaded (20)

Microsoft India - Windows Server 2008 R2 Remote Desktop Services Whitepaper