Mps monitoring-security-systems
- 1. Conventional Fire Alarm Systems / Zeta Conventional Manual Call Points (ZT-CP2, ZT-CP2/W, ZT-CP1 & ZT-CP1/W) The Zeta conventional manual call point has a modern design and has been approved by BSI to EN54 part 11. It is a resettable call point that signals an alarm with a yellow flag entering the window area and a red alarm LED. There are two versions available; the ZT-CP2 call points comes complete with a protective Perspex cover as well as a “snaplatch” catch that needs to be broken off before the call point cover can be lifted (this acts as a deterrent to malicious activations and forms a Type B call point). Alternatively the ZT-CP1 is supplied without the Perspex cover & “snaplatch” and is single action or Type A call point. The recommended colour for these call points is red however white is also available to meet architectural requirements. Features BSI approved to EN54 part 11 Attractive design Model ZT-CP2 ZT-CP2/W ZT-CP1 ZT-CP1/W Part No. 43-300 43-314 43-301 43-317 Type Type B Type A Element Type Resettable Break “snaplatch”, lift Perspex cover, press Alarm Activation Press element element Colour Red White Red White Input Voltage 9-33V DC Quiescent Current 0mA Alarm Current Typical 35mA (maximum 51mA) Alarm Load 470 Ω resistor Operating Temperature -20°C to 50°C Max Humidity 95% RH non-condensing IP Rating IP43 Size 111 x 100 x 67mm 105 x 100 x 58mm Weight 198g 175g Issue #2 Issue Date 05/07/2010 Revision #3