![MiniDySC 25 Amps www.SOFTSWITCH.com
Dimensions (in inches; millimeters in brackets)
9.3 3.6 16.0 3.8
[236.2] [91.4] [406.4] [96.5]
Standard Extended
Runtime Runtime
(SR) DySC: (ER) DySC:
21.1 21.1
[535.9] [535.9]
Technical Specifications
Electrical Specifications (Typical)* Mechanical (Typical)*
Input/Output Voltage 100, 120, 200, 208, 220, 230, 240 Enclosure NEMA 1 (IP20), see figures for dimensions (approx.)
Frequency 50/60 Hz auto-sensing Accessibility (Wiring) DIN compression terminal block
Phase (Wiring) 1 phase (L–N & L–L) Weight lbs (kg) SR: 20 lbs (9.1 kg); ER: 30 lbs (13.6 kg)
Detection Voltage -13% of rated input voltage
Environmental
Response Time .7 ms detection, 1.2 ms inverter reaction (<2 ms)
Ambient Temp. 0°–40°C (32°–104°F)
Current Distortion Unchanged, determined by the load
Storage Temp. - 40°–75°C (- 40°–167°F)
Current 25 amps
Relative Humidity 0 to 95%, noncondensing
Output Capacity 2.5–6.0 kVA
Heat Dissipation 130 BTU/hr. (max)
Output Overload 200% for 30 sec, 400% for 5 sec, 600% for .5 sec
Cooling Forced air
(Current)
Altitude 1000 m (3,300 ft) without load derating
Efficiency >99%
Audible Noise <50 dBA at 1 m
Correction Time 87% to 50% voltage remaining: 5 sec
cumulative every 60 seconds Communications/User Interface
0% voltage remaining: > 50 ms (SR), 200 ms (ER)
– Indicators Line, alarm LEDs
Waveform True sine wave
Compliance
Agency Approvals cULus Listed, exceeds SEMI F47
* Specifications are typical and subject to change without notice due to
Surge Suppression 6.5 kA per mode, tested to IEEE C62.41.1/UL1449,
continuing product improvement programs.
2nd edition
Warranty Standard 1 year (extended warranty available)
Catalog Number
DS10025A V H1000C
S E Standard or Extended Runtime
1 2 1 Line – Line, 2 Line – Neutral
100V 120V 200V 208V 220V 230V 240V
3125.02
© 2008, SoftSwitching Technologies Corporation](https://image.slidesharecdn.com/minidysc25a-electrical-components-120724043548-phpapp02/85/Mini-dysc-25a-electrical-components-2-320.jpg)
Mini dysc 25a-electrical-components
- 1. MiniDySC 25 Amps www.SOFTSWITCH.com C US Ideal component-level protection for: PLCs CONTRACTORS RELAYS POWER SUPPLIES SENSORS AC I/O COMPRESSORS VISION RFID TEMPERATURE CONTROLLERS OPERATION INTERFACES TIMERS COUNTERS SAFETY COMPONENTS Built to protect every single component. From every conceivable voltage sag. Our MiniDySC Dynamic Sag Corrector is the ideal solution for protecting sensitive electronic components from the short-term voltage sags that account for 30% of all manufacturing downtime. Built for maximum flexibility, the MiniDySC can be applied to a variety of component- level scenarios, keeping power levels steady, equipment online and productivity levels high, without the excessive energy costs and battery care issues associated with other systems. DySC Protection Features • Proprietary “Double Conversion” Power Core–dCPC • Fastest Sag Detection and Response Time - DySC is optimized for fast response at voltage peaks, with a typical peak voltage detect time (pVdT) of 1 ms. - Sags are corrected with a peak voltage response time (pVrT) of 1.5 ms–1/10th of a cycle, including detection time. • Adaptive Frequency Management (aFM) and auto-select of ~50 Hz or ~60 Hz with advanced digital phase locked loop synchronization (PLL) • True Sinusoidal Reconstruction (tSR) Theory of Operation SoftSwitching Technologies® Phone (Toll-free) 800-226-5028 Phone (Local) 608-662-7200 Fax 608-662-7300 Email info@softswitch.com Web www.softswitch.com Mail 8155 Forsythia Street Middleton, WI 53562, USA
- 2. MiniDySC 25 Amps www.SOFTSWITCH.com Dimensions (in inches; millimeters in brackets) 9.3 3.6 16.0 3.8 [236.2] [91.4] [406.4] [96.5] Standard Extended Runtime Runtime (SR) DySC: (ER) DySC: 21.1 21.1 [535.9] [535.9] Technical Specifications Electrical Specifications (Typical)* Mechanical (Typical)* Input/Output Voltage 100, 120, 200, 208, 220, 230, 240 Enclosure NEMA 1 (IP20), see figures for dimensions (approx.) Frequency 50/60 Hz auto-sensing Accessibility (Wiring) DIN compression terminal block Phase (Wiring) 1 phase (L–N & L–L) Weight lbs (kg) SR: 20 lbs (9.1 kg); ER: 30 lbs (13.6 kg) Detection Voltage -13% of rated input voltage Environmental Response Time .7 ms detection, 1.2 ms inverter reaction (<2 ms) Ambient Temp. 0°–40°C (32°–104°F) Current Distortion Unchanged, determined by the load Storage Temp. - 40°–75°C (- 40°–167°F) Current 25 amps Relative Humidity 0 to 95%, noncondensing Output Capacity 2.5–6.0 kVA Heat Dissipation 130 BTU/hr. (max) Output Overload 200% for 30 sec, 400% for 5 sec, 600% for .5 sec Cooling Forced air (Current) Altitude 1000 m (3,300 ft) without load derating Efficiency >99% Audible Noise <50 dBA at 1 m Correction Time 87% to 50% voltage remaining: 5 sec cumulative every 60 seconds Communications/User Interface 0% voltage remaining: > 50 ms (SR), 200 ms (ER) – Indicators Line, alarm LEDs Waveform True sine wave Compliance Agency Approvals cULus Listed, exceeds SEMI F47 * Specifications are typical and subject to change without notice due to Surge Suppression 6.5 kA per mode, tested to IEEE C62.41.1/UL1449, continuing product improvement programs. 2nd edition Warranty Standard 1 year (extended warranty available) Catalog Number DS10025A V H1000C S E Standard or Extended Runtime 1 2 1 Line – Line, 2 Line – Neutral 100V 120V 200V 208V 220V 230V 240V 3125.02 © 2008, SoftSwitching Technologies Corporation