Mth3101 Advanced Calculus Chapter 1

Advanced calculus MTH 3101
Chapter 1, Mean value theorem and continuity

CHAPTER 1
Calculus - Reviewed
1.1 ROLLE AND THE MEAN VALUE THEOREM
We can combine the definition of derivative with the Intermediate Value
Theorem to give a useful result which is in fact the basis of most elementary
applications of the differential calculus. Like the results of continuous
functions we need continuity and differentiability on a whole interval.
To arrive at the Mean Value theorem we first need the Roll’s Theorem
Theorem 1 (Rolle's Theorem) Let f be a continuous function on [a, b], and
differentiable on (a,b), and suppose that f (a ) = f (b) (possible
f (a ) = f (b) = 0 ). Then there is a number c with a<c<b such that f ′(c) = 0 .
Note: The theorem guarantees that the point c exists somewhere. It gives
no indication of how to find c. Here is the diagram to make the point
geometrically:

Figure 1:
If f crosses the axis twice, somewhere between the two crossings, the
function is flat. The accurate statement of this “obvious” observation is
Rolle's Theorem. Before proof the Roll’s Theorem we state the following
Theorems:
Theorem A: (The Intermediate Value Theorem) Suppose that f is
continuous on the closed interval [a,b] and let M be any number between
f(a) and f(b), where f (a ) ≠ f (b) . Then there exists a number c in (a,b) s.t.
f(c)=M.
Remarks: The Intermediate Value Theorem can be used for finding the
roots of equations.
Example: Show that there is a root of the equation between 1 and 2.
4x3-6x2+3x-2=0
Solution: Let f(x)= 4x3-6x2+3x-2. We are looking for a solution of the given
equation, that is a number c∈(1,2) s.t. f(c)=0. Therefore we take a=1, b=2,
and M=0 in Theorem A. For the function f(x) we have
f(1)=-1<0 and f(2)=12>0

1

Thus M=0 is a number between f(1) and f(2). Now f(x) is continuous since it
is polynomial, so the Intermediate Value Theorem says there is a number
c∈(1,2) s.t. f(c)=0. In other words the equation 4x3-6x2+3x-2=0 has at least
one root c in the interval (1,2).
Theorem B: (The Extreme Value Theorem) If f is continuous on the closed
interval [a,b] then f attains an absolute maximum value f(c) and absolute
minimum value f(d) at some numbers c and d in [a,b].
Theorem C: (Fermet’s Theorem) If f has a local maximum or minimum at c,
and if f '(c) exists, then f '(c) = 0 .
PROOF: Since f is continuous on the compact interval [a, b], it has both a
global maximum and a global minimum (by The Extreme Value Theorem).
Assume first that the global maximum occurs at an interior point c ∈ (a, b)
i.e. f ( x) ≤ f (c) for some x ∈ (a, b) . Now we pick up h small enough so that
c + h always lies in (a, 222222222b). Then f (c + h) ≤ f (c) .
If h > 0 ,
f (c + h ) − f (c )
≤0,
h
and since we know the limit exists, so
f ( c + h ) − f (c )
lim = f '( c) ≤ 0 ,
+
h →0 h
Similarly, if h < 0 ,
f (c + h ) − f (c )
≥0,
h
and so
f ( c + h ) − f (c )
lim = f '( c) ≥ 0 ,
+
h →0 h
Combining these, we see that f'(c)=0, and we have the result in this case. A
similar argument applies if, instead, the global minimum occurs at the
interior point c.
The remaining situation occurs if both the global maximum and global
minimum occur at the end points; since f(a)=f(b), it follows that f is constant,
and any c ∈ (a, b) will do.
Example 1: Investigate the number of roots of each of the polynomials
p(x)=x3+3x+1 and q(x)=x3-3x+1.
SOLUTION: Since p'(x)=3(x2+1)>0 for all x ∈ R and p(-∞)<0, p(∞)>0, we see
that p has at most one root; for if it had two (or more) roots there would be a
root of p'(x)=0 between them by Rolle’s Theorem. Since p(0)=1>0, while

2

p(-1)=-3<0, there is at least one root by the Intermediate Value Theorem.
Hence p has exactly one root.
For the second q(x) function we have q'(x)=3(x2-1)=0 when x=±1. Since
q(-1)=3>0 and q(1)=-1<0, there is a root of q(x) between -1 and 1 by the
Intermediate Value Theorem. Letting x → ∞ and x → −∞ one can find that
there are two more roots of q(x) on the intervals (-∞,-1) and (1,∞).
Exercise 1 Show that the equation x − e − x = 0 has exactly one root in the
interval (0, 1).
Our version of Rolle's Theorem is valuable as far as it goes, but the
requirement that f(a)=f(b) is sufficiently strong that it can be quite hard to
apply sometimes. Fortunately the geometrical description of the result, that
somewhere the tangent is parallel to the axis, does have a more general
restatement.

Figure 2
Figure 2: Somewhere inside a chord, the tangent to f will be parallel to the
chord. The accurate statement of this common-sense observation is the
Mean Value Theorem.
Theorem 2 (The Mean Value Theorem) Let f be continuous on [a, b], and
differentiable on (a, b). Then there is some c with a < c < b such that
f (b ) − f (a )
= f ′(c)
b−a
or equivalently
f (b) = f (a ) + (b − a ) f ′(c)
PROOF: We apply Rolle’s Theorem to a suitable function; let
f (b) − f (a )
h( x) = f (b) − f ( x) − (b − x)
b−a
Then h is continuous on the interval [a, b], since f is, and in the same way, it
is differentiable on the open interval (a, b). Also, h(b) = 0 and h(a) = 0. We
can thus apply Rolle's Theorem to h to deduce there is some point c with
a < c < b such that h'(c) = 0. Thus we have

3

f (b ) − f (a )
0 = h′(c) = − f ′(c) +
b−a
which is the required result.
1
Example 2 The function f satisfies f ′( x) = and f (0) = 2 . Use the
5 − x2
Mean Value Theorem to estimate f (1).
SOLUTION: We first estimate the given derivative for values of x satisfying
0<x<1. Since for such x, we have 0<x2<1, or -1<–x2<0 and so 4< 5-x2 <5.
Inverting this we see that
1
5 < f ′( x) < 1
4 when 0 < x < 1.
Now apply the Mean Value theorem to f on the interval [0, 1] to obtain some
c with 0 < c < 1 such that
f (1) − f (0)
= f '(c)
1− 0
or
f (1) = f (0) + f '(c) = 2 + f '(c)
From the given value of f (0), we see that 2.2 < f (1) < 2.25
1
Exercise 3 The function f satisfies f ′( x) = and f(0)=0. Use the
5 + sin x
Mean Value theorem to estimate f(π/2).
Note that if the derivative doesn't change much on x∈[0,π/2], the function
f(x) will behave linearly. This leads to the approximation
f (a + h) ≈ f (a ) + hf ′(a ) .
We now see that the accurate version of this replaces f'(a) by f'(c) for some
c between a and a+h. To estimate f(π/2) we do the followings. Since
-1≤ sinx ≤1 and 4≤ 5+sinx ≤6, inverting yields
1 1 1 1 1
≤ ≤ or ≤ f '(c) ≤
6 5 + sin x 4 6 4
Due to Mean Value theorem and f(0)=0 we have
π  π
f   = f '( c)
2 2
And so
π π  π
≤ f  ≤ .
72  2  48

4

Theorem 3 (The Cauchy Mean Value Theorem) Let f and g be both
continuous on [a, b] and differentiable on (a, b). Then there is some point c
with a < c < b such that
g'(c) (f (b) - f (a)) = f'(c)( g(b) - g(a)).
In particular, whenever the quotients make sense, we have
f (b ) − f (a ) f ′(c )
=
g (b) − g (a ) g ′(c)
PROOF: Let
h(x) = f (x)(g(b) - g(a)) - g(x)(f (b) - f (a)),
and apply Rolle's theorem exactly as we did for the Mean Value Theorem.
Note first that since both f and g are continuous on [a, b], and differentiable
on (a, b), it follows that h has these properties. Also
h(a) = f(a)g(b) - g(a)f(b) = h(b).
Thus we may apply Rolle to h, to deduce there is some point c with a < c <
b such that h'(c) = 0. But
h'(c) = f'(c)(g(b) - g(a)) - g'(c)(f (b) - f (a))
Thus
f'(c)(g(b) - g(a)) = g'(c)(f (b) - f (a))
This is one form of the Cauchy Mean Value Theorem for f and g. If g'(c) ≠ 0
for any possible c, then the Mean Value theorem shows that g(b) - g(a) ≠ 0,
and so we can divide the above result to get
f (b ) − f (a ) f ′(c )
= ,
g (b) − g (a ) g ′(c)
giving a second form of the result.
Note: Taking g(x)=x recovers the Mean Value Theorem.

1.2 TAYLOR'S THEOREM
We have so far explored the Mean Value theorem, which can be rewritten
as
f(a+h)=f(a) + hf'(c)
where c is some point between a and a + h . [By writing the definition of c in
this way, we have a statement that works whether h>0 or h<0.] We have
already met the approximation
f (a + h) ≈ f (a ) + hf ′(a )
when we have studied the Newton-Raphson method for solving an equation,
and have already observed that the Mean Value Theorem provides a more

5

accurate version of this. Now consider what happens when f is a polynomial
of degree n,
f(x) = a0 + a1x + a2x2 +...+ an-1xn-1 + anxn.
Note that f (0) = a0. Differentiating gives
f ′( x) = a1 + 2a2 x + 3a3 x 2 + ... + (n − 1)an −1 x n −2 + nan x n −1
and so
f'(0) = a1.
Again, we have
f''(x) = 2a2 + 3.2a3x+...+ (n-1)(n-2)an-1xn-3 + n(n-1)anxn-2,
and
f''(0)=2a2.
After the next differentiation, we get
f'''(0) = 3!a3,
while after k differentiations, we get,
f(k)(0) = k!ak,
provided k ≤ n . Thus we can rewrite the polynomial, using its value, and the
value of its derivatives at 0, as
f ′′(0) 2 f ′′′(0) 3 f ( n −1) (0) n−1 f ( n ) n
f ( x) = f (0) + f ′(0) x + x + x + ... + x + x
2! 3! ( n − 1)! n!
This opens up the possibility of representing more general functions than
polynomials in this way, and so getting a generalisation of the Mean Value
Theorem.
Theorem 2 (Taylors Theorem - Lagrange form of Remainder) Let f be
continuous on [a, x], and assume that each of f', f'',..., f(n+1) is defined on
[a, x]. Then we can write
f(x) = Pn(x) + Rn(x),
where Pn(x), the Taylor polynomial of degree n about a, and Rn(x), the
corresponding remainder, are given by
f ′′(a ) f ( n ) (a)
Pn ( x) = f (a ) + f ′(a )( x − a ) + ( x − a ) 2 + ... + ( x − a)n
2! n!
and
f ( n +1) (c)
Rn ( x) = ( x − a ) n +1
(n + 1)!
where c is some point between a and x.

6

We make no attempt to prove this, although the proof can be done with the
tools we have at our disposal. Some quick comments:
 The theorem is also true for x < a; just restate it for the interval [x, a] etc;
 If n = 0, we have
f ( x) = f (a ) + ( x − a ) f ′(c)
for some c between a and x; this is a restatement of the Mean Value
Theorem;
 If n = 1, we have
f (c )
f ( x) = f (a) + ( x - a) f '( x) + ( x - a)2
2!
for some c between a and x; this often called the Second Mean Value
Theorem;
 in general we can restate Taylor's Theorem as
f ′′(a )
f ( x) = f (a ) + f ′(a )( x − a) + ( x − a )2 + ...
2!
(n) ( n +1)
f (a) f (c )
+ ( x − a)n + ( x − a)n +1
n! (n + 1)!
for some c between a and x
 the special case in which a=0 has a special name; it is called
Maclaurin's Theorem;
 just as with Rolle’s, or the Mean Value Theorem, there is no useful
information about the point c.
We now explore the meaning and content of the theorem with a number of
examples.
Example 3 Find the Taylor polynomial of order n about 0 for f ( x) = e x , and
write down the corresponding remainder term.
Solution: There is no difficulty here in calculating derivatives. Clearly
f ( k ) ( x) = e x for all k, and so f ( k ) (0) = 1 . Thus by Taylor's theorem,

x 2 x3 x 4 xn x n+1 c
e = 1 + x + + + + ... + +
x
e
2! 3! 4! n ! (n + 1)!
for some point c between 0 and x. In particular,
x 2 x3 x 4 xn x n +1 c
Pn ( x) = 1 + x + + + + ... + and Rn ( x) = e
2! 3! 4! n! (n + 1)!
We can actually say a little more about this example if we recall that x is
fixed. We have

7

x n+1 c
e = Pn ( x) + Rn ( x) = Pn ( x) +
x
e
(n + 1)!
We show that Rn(x)→ 0 as n→∞, so that (again for fixed x), the sequence
Pn(x)→ex as n→∞. If x<0, ec < 1 , because c∈(x,0) while if x ≥ 1 , then since
c<x, we have ec < e x . Thus
n +1
x n +1 c x
Rn ( x) = e ≤ max(e x ,1) → 0 as n → ∞ .
(n + 1)! (n + 1)!
We think of the limit of the polynomial as forming a series, the Taylor series
for ex. We study series (and then Taylor series) in Section 3.
Example 4 Find the Taylor polynomial of order 1 about a for f ( x) = e x , and
write down the corresponding remainder term.
SOLUTION: Using the derivatives computed above, by Taylor's theorem,
( x − a)2 c
e = e + ( x − a )e +
x a a
e
2!
for some point c between a and x. In particular,
( x − a)2 c
P ( x) = e a + ( x − a )e a and R1 ( x) =
1 e .
2!
Example 5 Find the Maclaurin polynomial of order n>3 about 0 for
f(x)=(1+x)3, and write down the corresponding remainder term.
SOLUTION: We have
f (x) = (1 + x)3 , f'(x) = 3(1 + x)2 ,
f''(x) = 6(1 + x), f'''(x) = 6,
f(n)(x) = 0 if n > 3.
f(0=1), f′(x)=3, f′′(x)=6,
and so, by Taylor's theorem
6 2 6 3
(1 + x)3 = 1 + 3x + x + x
2! 3!
a result we could have got directly, but which is at least reassuring.
Example 6 Find the Taylor polynomial of order n about 0 for f ( x) = sin x ,
and write down the corresponding remainder term.
SOLUTION: There is no difficulty here in calculating derivatives: we have
f(x) = sinx, f'(x) = cosx, f''(x) = - sinx,
f'''(x) = - cosx, f(4)(x) = sinx
and so on

8

f (0) = 0, f ′(0) = 1, f ′′(0) = 0, f ′′′(0) = −1
Thus by Taylor's theorem,
x3 x5 x 7 n +1 x 2 n+1
sin x = x − + − + ... + (−1) + ... x ∈ R
3! 5! 7! (2n + 1)!
Writing down the remainder term isn't particularly useful, but the important
point is that
x 2 n +3
R2 n +1 ( x) ≤ → 0 as n → ∞ .
(2n + 3)!

e x + e− x e x − e− x
Exercise 7 Recall that cosh x = , and that sinh x = . Now
2 2
check the shape of the following Taylor polynomials:
x2 x4 x 2n
cos x = 1 − + + ... + (−1) n + ...
2! 4! 2n !
x3 x 5 x 2 n +1
sinh x = x + + + ... + + ...
3! 5! (2n + 1)!
x2 x4 x2n
cosh x = 1 + + + ... + + ...
2! 4! (2n)!
Example 8 Find the maximum error in the approximation
x3
sin x ≈ x −
3!
given that | x| < 1/2.
SOLUTION: We use the Taylor polynomial for sin x of order 4 about 0,
together with the corresponding remainder. Thus
x3 x5
sin x = x − + cos c
3! 5!
for some c with 0 < c < 1/ 2 or −1/ 2 < c < 0 . In any case, since x < 1/ 2 ,

x5 x5 1 1
cos c ≤ ≤ 5 ≤
5! 5! 2 ⋅ 5! 120 ⋅ 32
Warning: The Taylor polynomial always exists, providing f is suitably
differentiable. But it need not be useful. Consider the example
 exp(−1/ x 2 ) if x > 0
f ( x) = 
0, if x ≤ 0
The interest in f is at 0; it is well behaved everywhere else. It turns out that

9

f (0) = f'(0) = f''(0) =...= f(n)(0) =...= 0.
So the Taylor polynomial of degree n for f about 0 is Pn(x) = 0 + 0x + 0x2 +...
+ 0 xn = 0, and so for every n, Rn(x) = f (x). Clearly in this case, Pn tells us
nothing useful about the function.
Example 9. Find the Taylor polynomial of order n about 0 for f ( x) = (1 + x)α ,
and note that this gives a derivation of the binomial theorem. In fact, the
remainder | Rn(x)|→0 as n → ∞ , provided |x| < 1.
SOLUTION: There is again no difficulty here in calculating derivatives. We
have
f ( x) = (1 + x)α
f ′( x) = α (1 + x)α −1
f ′′( x) = α (α − 1)(1 + x)α −2
f ′′′( x) = α (α − 1)(α − 2)(1 + x)α −3
f ( n ) ( x) = α (α − 1)...(α − n + 1)(1 + x)α −n
f (0) = 1
f ′(0) = α
f ′′(0) = α (α − 1)
f ′′′(0) = α (α − 1)(α − 2)
f ( n ) (0) = α (α − 1)...(α − n + 1)
Thus by Taylor's theorem,
α (α − 1) 2 α (α − 1)(α − 2)
(1 + x)α = 1 + α x − x + + ...
2! 3!
α (α − 1)...(α − n + 1) n
+ x + ...
n!
The remainder is not hard to deal with, but we omit the proof; in fact
|Rn(x)|→0 when n → ∞ .
Note also that if α > 0 is an integer, say α = n | Rn(x)| = 0 and f (x) = Pn(x).
This is another way to get the Binomial theorem.

10


Continuity of a Real Function
Mathematicly a function f is said to be continuous at the point x=a if for
every ε>0 there exist δ>0 such that
f(x) – f(a) < ε whenever x – a <δ
A function f is continuous at x = a if for any ε > 0 we can find δ > 0 such
that f ( x) − f (a ) < ε whenever x − a < δ .
Example Prove that f ( x) = x 2 is continuous at x0 = 2 .
Solution We must show that given any ε > 0 , we can find δ > 0 (depending
on ε ) such that
f ( x) − f (2) = x 2 − 4 < ε when x − 2 < δ .

Choose δ ≤ 1 so that 0 <| x − 2 |< 1 or 1 < x < 3, x ≠ 2
Then
x2 – 22 = x +2 x – 2 < δ x + 2 < 5δ
Take δ as 1 or ε / 5 , whichever is smaller. Then we have x − 4 < ε
2

whenever 0 <| x − 2 |< δ and the required result is proved.
Now we pose the question: What does delta depend on?
Clearly we expect that the smaller epsilon is, the smaller we will have to
take delta. But since x0 was set before we started to look for delta, the
chances are that the value of x0 we are given will affect what delta we need
just as much as epsilon does. The next example shows exactly how that
sort of thing can happen:
Example
The function f(x) is certainly continuous on R. Suppose we are given
x0=0 and ε=0.1. In this case δ=0.1 is good enough, because when
|x-x0|=|x|<0.1
then this means that
|x2-x02|=|x|2<0.01<0.1
Now suppose that we try to use the same values of ε and δfor a different x0,
say x0=20. In this case we can find values of x which go wrong. For
example, take x=20.05. Certainly |x-x0|<0.1, but nevertheless
|x2-x02|=|x-x0||x+x0|=0.05×40.05>0.1
Remarkably enough, oftentimes for functions that crop up in practice it is
possible to find values of delta which work for a given epsilon and for all x0.
When this happens we say that the function is uniformly continuous.

11

The reason that this remarkable, and frequently useful, property is fairly
common, is tied up in sequential compactness. We start with a formal
definition of uniform continuity

UNIFORMLY CONTINUOUS FUNCTION
Definition A function f ( x) is uniformly continuous in an interval if for any
ε > 0 we can find δ > 0 such that f ( x1 ) − f ( x2 ) < ε whenever x1 − x2 < δ
where x1 and x2 are any two points in the interval.
Example
The function f(x)=x2 is uniformly continuous on X=[0,1].
Proof We need to estimate

(since |x|, |y|≤1). Thus given ε>0 we take δ=ε/2 and
|f(x)-f(y)|<ε for all x,y ∈[0,1] with |x-y|<δ.
Graphical interpretation of uniform continuity
A function is continuous at a point x0 if, given a fixed height epsilon, we
could always choose a narrow enough width delta, so that the curve never
passed through the ceiling or floor of the box of height epsilon, and width
delta, centered on (x0, f(x0)).
By the same taken, we can say that f is uniformly continuous if, given a
diameter of epsilon we can always cut a tube of diameter epsilon to short
enough a length (namely, delta) that it can run freely along the curve without
bumping into the sides of the tube. The following picture illustrates this idea:

From this point of view, it is clear that one thing which could cause a
continuous function to fail to be uniformly continuous would be is the slope
of the line becomes too large. The following theorem shows that,
conversely, if the slope is never too large, the function must be uniformly
continuous.

12

There is a relationship between the properties of the continuity of function in
the closed interval [a, b] with uniform continuity. In the above example we
see the function f(x) = x3 is uniformly continuous in the [0, 20].
Is all continuous function in the closed interval will be uniformly continuous?

Theorem. Let f be a continuous real valued function in the closed interval
[a,b], then f is uniformly continuous in that interval.
Theorem If f ( x) is continuous in a closed interval, it is uniformly
continuous in this interval.
Continuity in the open interval (a,b) of a real function f cannot guarantee
uniform continuity can occur.

13

Mth3101 Advanced Calculus Chapter 1

More Related Content

What's hot (14)

Similar to Mth3101 Advanced Calculus Chapter 1 (20)

Recently uploaded (20)

Mth3101 Advanced Calculus Chapter 1