neo4j
- 1. sudo apt-get update sudo apt-get upgrade Installing Dependencies First, let's set up some dependencies. After updating Kali, you'll need Python, Netaddr, and Libdnet to make this work. Kali Linux typically includes Python, but if not you can run: apt-get install python Install git on ubuntu 16.04 sudo apt-get install git git clone https://github.com/drkjam/netaddr cd netaddr sudo python setup.py install cd git clone https://github.com/secdev/scapy.git cd scapy sudo python setup.py install Great! Let's get Probemon and run it for the first time. git clone https://github.com/nikharris0/probemon.git cd probemon sudo python probemon.py If you see something like the following, than the script is ready to run. If it complains about a dependency or module being missing, odds are you'll need to find it on GitHub and install it like Scapy and Netaddr. I noted in my first build on a Mac, I needed Libdnet, but I didn't seem to need when installing on Kali
- 2. First of all, we need Kali Linux (optional). Python3 and the probequest library are required for the probequest to work . Command: sudo pip3 install --upgrade probequest There is also an option to install the program from GitHub Team: git clone https://github.com/SkypLabs/probequest.git cd probequest sudo pip3 install --upgrade We translate our Wi-Fi adapter into monitoring mode Our task is to transfer our Wi-Fi adapter to the monitoring mode. To do this, open the terminal and enter the ifconfig command to get a list of devices. I have my adapter displayed as wlan0 . The next step is to enter the command sudo airmon-ng start wlx00c0ca75ab5d (How to put the card into monitoring mode) Find the neighboring device Now, after installing the probeques and switching the map to monitoring mode, we can launch the Probequest program. The command to start listening to traffic and finding devices sudo probequest -i wlx00c0ca75ab5d