Omkar Electronics, Thane, Elevator Components
0 likes1,030 views
The document describes various elevator and lift controllers by Omkar Electronics, focusing on features such as LCD displays, safety measures, low voltage and high voltage separation, and enhanced user interface solutions. It outlines multiple controller models capable of handling different configurations, including gearless and hydraulic options with advanced functionalities like single wire registration and anti-nuisance logics. Additional highlights include detailed specifications for wiring harnesses, maintenance benefits, and compliance with safety regulations.
Omkar Electronics, Thane, Elevator Components
- 3. NGLC-Single Speed Lift Controller : NGLC Single speed Passenger Lift controller with LCD Display G+7, Down collective TO CONTROL HURDLE FOR SMOOTH RIDING Features of single speed elevator controller • State-of-art design with Low voltage and High voltage separation in PCB layout. • LCD display to show shaft faults, car gate – landing gate – limit switches position – current position and destination of car, all pending calls, etc. • Counting type car top reeds – only two reeds, one for up direction and second for down direction. • 16 digit alphanumeric password for counter for lift stopping after defined predetermined time, e.g. one day, one week, one month or two months, etc. • Three stage safety chain for customer, avoiding accidental shorting of safeties by trainee technician. In no condition a technician can short entire safety of lift. • Floor setting is field settable. OMKARELECTRONICSELECTRONICS
- 4. NGLC Single speed Passenger Lift controller with LCD Display G+7, Down collective • As all relays are on same board maintenance becomes simple. • Aextra safety relay introduced on board to enhance passenger safety. NGLC-Single Speed Lift Controller : OMKAR ELECTRONICSAN ISO 9001:2008 company NAIC-CRISIL SE 3B JAS-ANZ Regd. Office & Works : Plot No. K-3, Udyog Bhavan 2, “A” Wing, F-7, 1st Floor, Additional Ambernath, MIDC, Anand Nagar, Ambernath (E) - 421 506. Dist. Thane, Maharashtra State. INDIA. Tel No.: 0251-2621040 OMKARELECTRONICSELECTRONICS Email : sale.omkar@yahoo.com / omkar_electronics@ymail.com Website : omkarelectronics.net
- 5. TO CONTROL SMALL LEAP TO HIGHEST ALTITUDE Features of V3F or multi speed elevator controller • State-of-art design with Low voltage and High voltage separation in PCB layout. • 7 segment common anode display output. • LCD display to show shaft faults, car gate – landing gate – limit switches position – current position and destination of car, all pending calls, etc. • Single wire registration i.e. only one off wire from button. • Counting type car top reeds – Only two reeds, one for up direction slowing and second for down direction slowing and two more reeds, one for up direction stopping and second for down direction stopping. • 16 digit alphanumeric password for counter for lift stopping after defined predetermined time, e.g. one day, one week, one month or two months, etc. • On board optical isolation from field wiring. • Three stage safety chain for customer, avoiding accidental shorting of safeties by trainee technician. In no condition a technician can short entire safety of lift. • Car gate and landing gate voltage 110v. • There are six limit switches – three on top floor and three on ground floor. All limit switches are 110, for reliable intended operation. Reed switches are not allowed in place of limit NGLC- V3F Lift Controller : For Geared Motor-AutoDoor/ManualDoor OMKARELECTRONICSELECTRONICS
- 6. switches, according to Bombay Lift rules. • All limit switches are NC according to Bombay Lift Rules. • Output contactor for motor, for isolating motor from source, according to Bombay Lift Rules. • Extra brake relay in PCB to take care of drive becoming faulty. In any case is drive hangs or becomes non-responsive during running, this relay comes in picture and avoids accident. • Separate R-cam contactor for New type locks. • As all components are of SMD technology, life of components increases because of reduced oxidation of contact and junctions. • DOB, Auto Fan, Auto / Manual doors relays are also available on-board. • Floor setting is field settable. ADVANTAGES OF OGEN2 OVER OGEN1 1) Output contactor feedback taken as per ISI recommendationandinternationalnorms. 2) Brake contactor feedback taken as per ISI recommendationandinternationalnorms. 3) Single wire display available to reduce digital display wiring andtravellingcable. 4) Six pre-programmed 7 segment display groups as per requirement of customer are available to selectaspersitedenominations. 5) Customer encoding software for particular customer is possible in digital displays along with 16 digit alphanumeric password for business retention. 6) ARD input and output introduced as per international standards. 7) Overload and Full load inputs introduced in software. 8) Anti nuisance logics incorporated as per internationalnorms. 9) Separate two relays for UP and DOWN command fordriveinterfacing. 10) DooropenandDoorcloserelaysseperate. 11) Auto door / Manual door selection in controller card. 12) Dooropentimesiteselectable. 13) RunTimerintroduced. 14) Anti-creep input added in software for hydraulic controller. 15) Emergencystopinputavailable. 16) LowcostDuplexcontrolleravailable. OGEN 2 OGEN 1 NGLC- V3F Lift Controller : For Geared Motor-AutoDoor/ManualDoor OMKAR ELECTRONICSAN ISO 9001:2008 company NAIC-CRISIL SE 3B JAS-ANZ Regd. Office & Works : Plot No. K-3, Udyog Bhavan 2, “A” Wing, F-7, 1st Floor, Additional Ambernath, MIDC, Anand Nagar, Ambernath (E) - 421 506. Dist. Thane, Maharashtra State. INDIA. Tel No.: 0251-2621040 OMKARELECTRONICSELECTRONICS Email : sale.omkar@yahoo.com / omkar_electronics@ymail.com Website : omkarelectronics.net
- 7. ARD Controller (Universal) – Auto Door & Manual Door TO CONTROL IT TO NEW LEVELS OF EXCELLENCE FEATURES – 1) Can be interfaced with any controller either single speed or V3F. 2) Only safety chain of main controller needs to be routed from this controller. 3) Terminal limit switches of main controller can also be interfaced optionally. 4) Inclusive with battery and battery charger. 5) Motor supply, brake, Retiring Cam and auto door supply are connected parallel to existing supply and becomes active only duringARD operation. 6) Saves battery life and improves number of starts because of current sensing. OMKARELECTRONICSELECTRONICS
- 8. FUNCTIONING OF ARD CONTROLLER – 1) There is small adjustable delay in taking over of ARD operation after power shut down to accommodate mechanical stabilization of entire system and to protect gear box. 2) Once system stabilizes, and safety chain is detected, inverter section starts and 110vdc is generated to activate R Cam. 3) Then motor rotates once clockwise and once anti-clockwise and compares current in both directions. And continues to run in the direction where current consumption is low to save batteries. ARD Controller (Universal) – Auto Door & Manual Door OMKAR ELECTRONICSAN ISO 9001:2008 company NAIC-CRISIL SE 3B JAS-ANZ Regd. Office & Works : Plot No. K-3, Udyog Bhavan 2, “A” Wing, F-7, 1st Floor, Additional Ambernath, MIDC, Anand Nagar, Ambernath (E) - 421 506. Dist. Thane, Maharashtra State. INDIA. Tel No.: 0251-2621040 OMKARELECTRONICSELECTRONICS Email : sale.omkar@yahoo.com / omkar_electronics@ymail.com Website : omkarelectronics.net
- 9. NGLC – MRL – Geared OR Gearless Features of MRL controller • Full collective, G+10. • Only external UPS is required as ARD, all other switchgear is inbuilt. • 7 segment common anode display output. • LCD display to show shaft faults, car gate – landing gate – limit switches position – current position and destination of car, all pending calls, etc. • Single wire registration i.e. only one off wire from button. • Counting type car top reeds – Only two reeds, one for up direction slowing and second for down direction slowing and two more reeds, one for up direction stopping and second for down direction stopping. • 16 digit alphanumeric password for counter for lift stopping after defined predetermined time, e.g. one day, one week, one month or two months, etc. • On board optical isolation from field wiring. • Three stage safety chain for customer, avoiding accidental shorting of safeties by trainee technician. In no condition a technician can short entire safety of lift. • Car gate and landing gate voltage 110v. • There are six limit switches – three on top floor and three on Ground floor.All limit switches are 110, for reliable intended TO CONTROL SPEED TO THE HIGHEST LEVEL OMKARELECTRONICSELECTRONICS
- 10. operation. Reed switches are not allowed in place of limit switches, according to Bombay Lift rules. • All limit switches are NC according to Bombay Lift Rules. • Output contactor for motor, for isolating motor from source, according to Bombay Lift Rules. • Extra brake relay in PCB to take care of drive becoming faulty. In any case is drive hangs or becomes non- responsive during running, this relay comes in picture and avoids accident. • DOB, Auto Fan, Auto / Manual doors relays are also available on-board. • Floor setting is field settable. NGLC – MRL – Geared OR Gearless OMKAR ELECTRONICSAN ISO 9001:2008 company NAIC-CRISIL SE 3B JAS-ANZ Regd. Office & Works : Plot No. K-3, Udyog Bhavan 2, “A” Wing, F-7, 1st Floor, Additional Ambernath, MIDC, Anand Nagar, Ambernath (E) - 421 506. Dist. Thane, Maharashtra State. INDIA. Tel No.: 0251-2621040 OMKARELECTRONICSELECTRONICS Email : sale.omkar@yahoo.com / omkar_electronics@ymail.com Website : omkarelectronics.net
- 11. NGLC - Hydraulic Controllers up to G+7 Features of Hydraulic elevator controller • State-of-art design with Low voltage and High voltage separation in PCB layout. • 7 segment common anode display output. • LCD display to show shaft faults, car gate – landing gate – limit switches position – current position and destination of car, all pending calls, etc. • Single wire registration i.e. only one off wire from button. • Counting type car top reeds – Only two reeds, one for up direction slowing and second for down direction slowing and two more reeds, one for up direction stopping and second for down direction stopping. • 16 digit alphanumeric password for counter for lift stopping after defined predetermined time, e.g. one day, one week, one month or two months, etc. • On board optical isolation from field wiring. • Anti-creep input available. • Three stage safety chain for customer, avoiding accidental shorting of safeties by trainee technician. • Car gate and landing gate voltage 110v. TO CONTROL TOUCH FOR BETTER EXPERIENCE LEVEL OMKARELECTRONICSELECTRONICS
- 12. • There are six limit switches – three on top floor and three on Ground floor. All limit switches are 110, for reliable intended operation. Reed switches are not allowed in place of limit switches, according to Bombay Lift rules. • All limit switches are NC according to Bombay Lift Rules. • Output contactor for motor, for isolating motor from source, according to Bombay Lift Rules. • Separate R-cam contactor for New type locks. • As all components are of SMD technology, life of components increases because of reduced oxidation of contact and junctions. • DOB, Auto Fan, Auto / Manual doors relays are also available on-board. • Floor setting is field settable. NGLC - Hydraulic Controllers up to G+7 OMKAR ELECTRONICSAN ISO 9001:2008 company NAIC-CRISIL SE 3B JAS-ANZ Regd. Office & Works : Plot No. K-3, Udyog Bhavan 2, “A” Wing, F-7, 1st Floor, Additional Ambernath, MIDC, Anand Nagar, Ambernath (E) - 421 506. Dist. Thane, Maharashtra State. INDIA. Tel No.: 0251-2621040 OMKARELECTRONICSELECTRONICS Email : sale.omkar@yahoo.com / omkar_electronics@ymail.com Website : omkarelectronics.net
- 13. TO CONTROL THE BEST OUT OF OTHER Home Lift Controller - Gearless Motor Features of Home elevator controller • Works on only single phase supply, hence suitable for home installation. • Cost of ARD also reduces as only single ph UPS works as ARD. • Down collective, G+7 • 7 segment common anode display output. • LCD display to show shaft faults, car gate – landing gate – limit switches position – current position and destination of car, all pending calls, etc. • Single wire registration i.e. only one off wire from button. • Counting type car top reeds – Only two reeds, one for up direction slowing and second for down direction slowing and two more reeds, one for up direction stopping and second for down direction stopping. • 16 digit alphanumeric password for counter for lift stopping after defined predetermined time, e.g. one day, one week, one month or two months, etc. • On board optical isolation from field wiring. OMKARELECTRONICSELECTRONICS
- 14. • Three stage safety chain for customer, avoiding accidental shorting of safeties by trainee technician. In no condition a technician can short entire safety of lift. • Car gate and landing gate voltage 12v. • There are six limit switches – three on top floor and three on ground floor. All limit switches are 110, for reliable intended operation. Reed switches are not allowed in place of limit switches, according to Bombay Lift rules. • All limit switches are NC according to Bombay Lift Rules. • Output contactor for motor, for isolating motor from source, according to Bombay Lift Rules. • Extra brake relay in PCB to take care of drive becoming faulty. In any case if drive hangs or becomes non- responsive during running, this relay comes in picture and avoids accident. • DOB, Auto Fan, Auto / Manual doors relays are also available on-board. • Floor setting is field settable. Home Lift Controller - Gearless Motor OMKAR ELECTRONICSAN ISO 9001:2008 company NAIC-CRISIL SE 3B JAS-ANZ Regd. Office & Works : Plot No. K-3, Udyog Bhavan 2, “A” Wing, F-7, 1st Floor, Additional Ambernath, MIDC, Anand Nagar, Ambernath (E) - 421 506. Dist. Thane, Maharashtra State. INDIA. Tel No.: 0251-2621040 OMKARELECTRONICSELECTRONICS Email : sale.omkar@yahoo.com / omkar_electronics@ymail.com Website : omkarelectronics.net
- 15. 0.75 sq. mm 4 core Round or Flat Wire Harness Wire harness costing will depend on floor heights and other options, it will be quoted time to time. Travelling cable – # Wire rates are volatile and depend on fluctuations of copper and pvc prices hence kindly enquire at the time of ordering. # Our wire is ISI approved. Round or Flat0.5 sq. mm 0.75 sq. mm 0.5 sq. mm 12 core 12 core 6 core Round or Flat Round or Flat Single Core Wire 0.5 sq. mm 0.75 sq. mm 1 sq. mm 1.5 sq. mm 2 sq. mm 4 sq. mm Advantages of Harness – 1. Time required to do wiring reduces from 6 man-days to half man-day. 2. Wiring Error possibilities are reduced to zero. 3. No wastage or theft of costly wires. 4. No necessity of Expert Engineer for wiring of that particular controller. 5. Maintenance of lift becomes easy as every wire has ferrule to denominate the signal. A engineer sitting in office can direct and solve site problems by technicians, without visiting site. 6. As every contact has copper lugs, life of installation increases by reducing oxidation of contacts. 7. Man power retention cost incurred in maintaining expert people in organisation reduces drastically. 8. Inventory reduces to zero and Just-in-time technique is employed by user along with Just-as-required. No wire need to be purchased extra. OMKARELECTRONICSELECTRONICS
- 16. Accessories OMKAR ELECTRONICSAN ISO 9001:2008 company NAIC-CRISIL SE 3B JAS-ANZ Regd. Office & Works : Plot No. K-3, Udyog Bhavan 2, “A” Wing, F-7, 1st Floor, Additional Ambernath, MIDC, Anand Nagar, Ambernath (E) - 421 506. Dist. Thane, Maharashtra State. INDIA. Tel No.: 0251-2621040 1) Controller card for NGLC- Single Speed up to G+7 with LCD 2) Controller card for NGLC - V3F up to G+7 with LCD 3) Controller card for NGLC - G+15 Dn coll / G+10 Full coll with LCD 4) Reed s/w TVS make tubular (pencil type) 5) DOB 6) ‘U’ type Magnetic shoe for door zone 7) Fins (Cam) for Magnetic shoe mounting arrangement for auto door 8) Magnets 10) Heavy Duty Junction box set – includes junction box – 2 nos, maintenance box – 1 no, motor wire (7/20) – 50 yards, Beeper – 1 no, Lugs for motor – 9 nos. OMKARELECTRONICSELECTRONICS Email : sale.omkar@yahoo.com / omkar_electronics@ymail.com Website : omkarelectronics.net 9) Voice announcement systems up to G+15 with continuous music